DOI: https://doi.org/10.1039/d4sc08589b
PMID: https://pubmed.ncbi.nlm.nih.gov/39950063
تاريخ النشر: 2025-01-01
المؤلف: Velu Jeyalakshmi وآخرون
الموضوع الرئيسي: تقنيات التحفيز الضوئي المتقدمة
نظرة عامة
تناقش ورقة البحث دمج ذرات البالاديوم الفردية (Pd SAs) على نيتريد الكربون الجرافيتي (g-C₃N₄) من خلال طريقة ترسيب تفاعلية. تتيح هذه الطريقة تحميلًا قابلًا للتحكم وموحدًا لذرات Pd SAs في تكوين Pd-N على g-C₃N₄. تسلط الدراسة الضوء على أن تحميلًا منخفضًا قدره 0.05 wt% من Pd SAs، الذي تم تحقيقه باستخدام سلف Pd(NH₃)₄Cl₂، يؤدي إلى معدل إنتاج هيدروجين ملحوظ قدره 0.24 ملمول ساعة⁻¹ ملغ⁻¹ Pd. هذا المعدل يتفوق بشكل كبير على معدل جزيئات البالاديوم على g-C₃N₄ وهو أعلى بعشر مرات من معدل Pd SAs المرتبطة عبر طرق أخرى.
تؤكد النتائج على الدور الحاسم لآلية الارتباط في تعزيز الاقتران بين الذرات الفردية والركيزة، مما يقلل من مقاومة نقل الشحنة ويزيد من النشاط المساعد المشترك. يوصف العملية بأنها ذاتية التوجيه، مما يشير إلى أن التنشيط يحدث في المواقع الأكثر فعالية، وبالتالي تحسين الأداء التحفيزي العام.
مقدمة
تسلط المقدمة الضوء على الطلب المتزايد على الهيدروجين كحامل للطاقة النظيفة، مشددة على التحليل الضوئي للماء كطريقة فعالة لتحويل الطاقة الشمسية إلى هيدروجين ($H_2$). كان ثاني أكسيد التيتانيوم ($TiO_2$) هو المادة الرئيسية المدروسة لهذا الغرض منذ العمل الرائد لفوجيشما وآخرين، ولكن نيتريد الكربون الجرافيتي ($C_3N_4$) قد حظي بالاهتمام بسبب مزاياه، بما في ذلك الاستقرار العالي وامتصاص الضوء المرئي القوي، مما يعزز استخدام ضوء الشمس. ومع ذلك، تواجه تفاعل تطور الهيدروجين الضوئي (HER) على $C_3N_4$ تحديات حركية، مما يستلزم استخدام محفزات معدنية نبيلة مثل البلاتين (Pt) والبالاديوم (Pd) والروديوم (Rh) لتحقيق معدلات إنتاج هيدروجين معقولة. تشكل ندرة وتكلفة هذه المعادن حواجز كبيرة أمام التطبيقات على نطاق واسع، مما يدفع البحث إلى تقليل استخدامها مع الحفاظ على الأداء التحفيزي.
ركزت الدراسات الحديثة، بما في ذلك العمل الذي قام به أكيناغا وآخرون، على المحفزات ذات الذرات الفردية (SACs) لتعظيم كفاءة استخدام الذرات. تشير نتائجهم إلى أن Pd يظهر نشاطًا متفوقًا في تطور الهيدروجين مقارنةً بالمعادن النبيلة والمعادن الانتقالية الأخرى عند تثبيته على $C_3N_4$. حدد المؤلفون كلوريد تيترا أمين البالاديوم(II) ($Pd(NH_3)_4Cl_2$) كسلف واعد للترسيب التفاعلي، مما يسمح بتحميل Pd SAC قابل للتعديل. تظهر نتائجهم أن تركيزًا أدنى من السلف يمكن أن ينتج نشاط إنتاج هيدروجين مُعدل قدره $0.24 \, \text{mmol} \, h^{-1} \, mg^{-1} \, Pd$، وهو أعلى بـ 55 مرة من ذلك لجزيئات Pd على $C_3N_4$ عند مستويات تحميل أقل بكثير. يُعزى هذا النشاط المعزز إلى التنسيق القوي لـ Pd SACs داخل هيكل $C_3N_4$، مما يقلل من مقاومة نقل الشحنة ويبرز الإمكانية لاستخدام أكثر كفاءة للمعادن الثمينة في التطبيقات الضوئية.
النتائج
في هذه الدراسة، تم تخليق رقائق نانوية من g-C$_3$N$_4$ من خلال طريقة بوليكوندنسي حرارية باستخدام الميلامين والديسياندياميد، تلتها عملية تقشير حراري. تم التحقيق في جدوى ترسيب البالاديوم (Pd) ذرة واحدة (SA) مباشرة على g-C$_3$N$_4$ باستخدام ثلاثة سلف مختلفة: كلوريد تيترا أمين البالاديوم(II) (Pd(NH$_3$)$_4$Cl$_2$)، كلوريد البالاديوم(II) (PdCl$_2$)، وهكسكلوريد البالاديوم(IV) الأمونيومي ((NH$_4$)$_2$[PdCl$_6$]). من بين هذه، أدى Pd(NH$_3$)$_4$Cl$_2$ إلى تفاعل كامل مع g-C$_3$N$_4$، كما يتضح من غياب إشارات Cl 2p في مطيافية الإلكترونيات الضوئية (XPS) وتكوين ذرات Pd الفردية التي تم تأكيدها بواسطة مجهر الإلكترون الناقل ذو الزاوية العالية (HAADF-STEM). أظهرت الدراسة أن Pd SAs تعزز بشكل كبير إنتاج الهيدروجين الضوئي (H$_2$)، محققة معدل أقصى قدره 0.24 ملمول ساعة$^{-1}$ ملغ$^{-1}$ Pd عند تحميل منخفض قدره 0.05 wt%، وهو أعلى بـ 55 مرة من ذلك لجزيئات Pd التي تم تخليقها عبر الترسيب الضوئي.
تشير النتائج إلى أن دمج Pd SAs يؤدي إلى تقليل كبير في مقاومة نقل الشحنة، مع ملاحظة انخفاض بمقدار 98 مرة عند تركيز 0.05 مليمول. يرتبط هذا التحسين في ديناميات نقل الشحنة بنشاط ضوئي محسن، حيث تسهل Pd SAs نقل الإلكترونات بكفاءة تحت الإضاءة. تختتم الدراسة بأن طريقة الترسيب التفاعلي باستخدام Pd(NH$_3$)$_4$Cl$_2$ لا تعمل فقط على تحسين تحميل مواقع Pd النشطة ولكن أيضًا تعزز الكفاءة الضوئية لإنتاج H$_2$، متفوقة على الطرق التقليدية وتظهر إمكانيات المحفزات ذات الذرات الفردية في التطبيقات الضوئية.
المناقشة
في هذه المناقشة، يبرز المؤلفون مزايا استخدام Pd(NH₃)₄Cl₂ كسلف لتكوين ذرات البالاديوم الفردية (Pd SAs) على نيتريد الكربون الجرافيتي (g-C₃N₄). تسهل وجود مجموعات NH₃ في أيونات Pd(NH₃)₄²⁺ تشكيل هيكل تنسيق Pd-N، مما يعزز التفاعل مع ذرات النيتروجين في g-C₃N₄ مقارنةً بسلف البالاديوم المرتبط بالكلوريد. يؤدي ذلك إلى ترسيب أكثر فعالية لـ Pd SAs في المواقع الأكثر نشاطًا على سطح g-C₃N₄، مما يؤدي إلى زيادة كبيرة في كفاءة إنتاج الهيدروجين الضوئي. تظهر الدراسة أن تحميلًا منخفضًا قدره 0.05 wt% من Pd SAs يحقق معدل إنتاج هيدروجين أقصى قدره 0.24 ملمول ساعة⁻¹ ملغ⁻¹ Pd، وهو أعلى بعشر مرات من ذلك الذي تم تحقيقه بطرق أخرى.
يستنتج المؤلفون أن الطبيعة الذاتية التوجيه لعملية الترسيب التفاعلي تسمح بتكوين تكوينات Pd-N₄ المثلى في المواقع الأكثر نشاطًا تحفيزيًا، مما يقلل من مقاومة نقل الشحنة ويزيد من النشاط المساعد المشترك. تؤكد هذه الآلية الفعالة للارتباط على أهمية اختيار السلف في تعزيز الأداء الضوئي مع تقليل استخدام البالاديوم، مما يساعد على تجنب الهدر المرتبط بأساليب الترسيب الأقل استهدافًا.
DOI: https://doi.org/10.1039/d4sc08589b
PMID: https://pubmed.ncbi.nlm.nih.gov/39950063
Publication Date: 2025-01-01
Author(s): Velu Jeyalakshmi et al.
Primary Topic: Advanced Photocatalysis Techniques
Overview
The research paper discusses the integration of palladium single atoms (Pd SAs) onto exfoliated graphitic carbon nitride (g-C₃N₄) through a reactive deposition method. This approach allows for a controllable and uniform loading of Pd SAs in a Pd-N configuration on g-C₃N₄. The study highlights that a low loading of 0.05 wt% Pd SAs, achieved using the precursor Pd(NH₃)₄Cl₂, results in a remarkable hydrogen production rate of 0.24 mmol h⁻¹ mg⁻¹ Pd. This rate is significantly superior to that of palladium nanoparticles on g-C₃N₄ and is ten times higher than that of Pd SAs attached via other methods.
The findings emphasize the critical role of the attachment mechanism in enhancing the coupling between single atoms and the substrate, which minimizes charge transfer resistance and maximizes co-catalytic activity. The process is described as self-homing, indicating that activation occurs in the most effective locations, thereby optimizing the overall catalytic performance.
Introduction
The introduction highlights the increasing demand for hydrogen as a clean energy carrier, emphasizing photocatalytic water splitting as an effective method for converting solar energy into hydrogen ($H_2$). Titanium dioxide ($TiO_2$) has been the primary material studied for this purpose since the seminal work of Fujishima et al., but graphitic carbon nitride ($C_3N_4$) has gained attention due to its advantages, including high stability and strong visible light absorption, which enhances solar light utilization. However, the photocatalytic hydrogen evolution reaction (HER) on $C_3N_4$ faces kinetic challenges, necessitating the use of noble metal co-catalysts like platinum (Pt), palladium (Pd), and rhodium (Rh) to achieve reasonable hydrogen production rates. The scarcity and cost of these metals pose significant barriers to large-scale applications, prompting research into minimizing their usage while maintaining catalytic performance.
Recent studies, including work by Akinaga et al., have focused on single-atom catalysts (SACs) to maximize atom utilization efficiency. Their findings indicate that Pd exhibits superior hydrogen evolution activity compared to other noble and transition metals when anchored on $C_3N_4$. The authors identified tetraaminepalladium(II) chloride ($Pd(NH_3)_4Cl_2$) as a promising precursor for reactive deposition, allowing for adjustable Pd SAC loading. Their results demonstrate that a minimal precursor concentration can yield a normalized hydrogen production activity of $0.24 \, \text{mmol} \, h^{-1} \, mg^{-1} \, Pd$, which is 55 times greater than that of Pd nanoparticles on $C_3N_4$ at significantly lower loading levels. This enhanced activity is attributed to the strong coordination of Pd SACs within the $C_3N_4$ structure, which reduces charge transfer resistance and highlights the potential for more efficient use of precious metals in photocatalytic applications.
Results
In this study, nanosheets of g-C$_3$N$_4$ were synthesized through a thermal polycondensation method using melamine and dicyandiamide, followed by thermal exfoliation. The feasibility of directly depositing single-atom (SA) palladium (Pd) on g-C$_3$N$_4$ was investigated using three different precursors: tetraamminepalladium(II) chloride (Pd(NH$_3$)$_4$Cl$_2$), palladium(II) chloride (PdCl$_2$), and ammonium hexachloropalladate(IV) ((NH$_4$)$_2$[PdCl$_6$]). Among these, Pd(NH$_3$)$_4$Cl$_2$ resulted in complete reaction with g-C$_3$N$_4$, as evidenced by the absence of Cl 2p signals in X-ray photoelectron spectroscopy (XPS) and the formation of individual Pd atoms confirmed by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). The study demonstrated that Pd SAs significantly enhance photocatalytic hydrogen (H$_2$) production, achieving a maximum rate of 0.24 mmol h$^{-1}$ mg$^{-1}$ Pd at a low loading of 0.05 wt%, which is 55 times higher than that of Pd nanoparticles synthesized via photodeposition.
The results indicate that the incorporation of Pd SAs leads to a substantial reduction in charge transfer resistance, with a 98-fold decrease observed at a concentration of 0.05 mM. This enhancement in charge transfer dynamics correlates with improved photocatalytic activity, as the Pd SAs facilitate efficient electron transfer under illumination. The study concludes that the reactive deposition method using Pd(NH$_3$)$_4$Cl$_2$ not only optimizes the loading of active Pd sites but also enhances the photocatalytic efficiency for H$_2$ production, outperforming conventional methods and demonstrating the potential of single-atom catalysts in photocatalytic applications.
Discussion
In this discussion, the authors highlight the advantages of using Pd(NH₃)₄Cl₂ as a precursor for the formation of palladium single atoms (Pd SAs) on graphitic carbon nitride (g-C₃N₄). The presence of NH₃ groups in the Pd(NH₃)₄²⁺ ions facilitates the formation of a Pd-N coordination structure, which enhances the interaction with nitrogen atoms in g-C₃N₄ compared to chloride-coordinated palladium precursors. This results in a more effective deposition of Pd SAs at the most active sites on the g-C₃N₄ surface, leading to a significant increase in photocatalytic hydrogen production efficiency. The study demonstrates that a low loading of 0.05 wt% Pd SAs achieves a maximum hydrogen production rate of 0.24 mmol h⁻¹ mg⁻¹ Pd, which is ten times higher than that achieved with other methods.
The authors conclude that the self-homing nature of the reactive deposition process allows for optimal Pd-N₄ configurations to form at the most catalytically active sites, minimizing charge transfer resistance and maximizing co-catalytic activity. This efficient attachment mechanism underscores the importance of precursor choice in enhancing photocatalytic performance while reducing palladium usage, thereby avoiding waste associated with less targeted deposition methods.
