DOI: https://doi.org/10.1039/d5ta10405j
تاريخ النشر: 2026-01-01
المؤلف: Michela De Col وآخرون
الموضوع الرئيسي: الأطر العضوية المعدنية: التركيب والتطبيقات
نظرة عامة
تبحث الدراسة في الربط الانتقائي لأحادي أكسيد الكربون (CO) بمواقع ذرات المعادن الفردية من الكوبالت (Co(I)) ذات التنسيق الرباعي للنيتروجين ضمن شبكة تنسيق ثنائية المعدن من المنغنيز والكوبالت تم تجميعها ذاتيًا على الجرافين في درجة حرارة الغرفة. تكشف الدراسة أن حالة الربط غير مستقرة، وتتأثر بالتوازن المعتمد على الضغط بين الامتصاص والانفصال، مع طاقة ربط تبلغ 0.73 eV وزاوية ربط عمودية. يتميز امتصاص CO بمنحنى تشبع تم نمذجته باستخدام إيزوثيرم تيمكين وهيل، مما يشير إلى امتصاص غير تعاوني مدعوم بالشبكة، والذي يُعزى إلى التأثيرات الإلكترونية والمغناطيسية بدلاً من التفاعلات المباشرة بين ثنائي القطب.
تؤكد النتائج على الطبيعة القابلة للعكس والمعتمدة على الضغط لامتصاص CO، مع حدوث التشبع فوق 10^-3 مbar. تؤكد التحليلات الطيفية والحسابية على ضعف الربط بين Co وCO، مع ملاحظة كل من الإثارة الأساسية وإثارة النطاق الساخن لوضع اهتزاز CO تحت الإشعاع تحت الأحمر. توفر هذه الدراسة رؤى قيمة حول ديناميات الربط عند مواقع ذرات المعادن الفردية في المواد ثنائية الأبعاد، مما يشير إلى أنه يمكن تصميم الشبكات المعدنية العضوية المقيدة بالسطح لتكون قابلة للتعديل في التفاعلية تحت الظروف المحيطة. قد تسهل المنهجية المقدمة استكشاف خصائص التفاعلية لمجموعات المعادن المختلفة في المواد ثنائية الأبعاد عبر نطاق ضغط واسع، مما يعزز التطبيقات في التحفيز واستشعار الجزيئات.
مقدمة
تسلط مقدمة هذه الورقة البحثية الضوء على أهمية امتصاص أحادي أكسيد الكربون (CO) على الأسطح، وهو موضوع كان محوريًا في علم السطح منذ ظهور دراسات الفراغ الفائق (UHV). تهدف الدراسة إلى تعزيز فهم عمليات الامتصاص وتكوين الروابط لتطوير محفزات نموذجية متقدمة لتفاعلات التحفيز المتعلقة بـ CO بكفاءة. تم استخدام أنظمة متنوعة، بما في ذلك أسطح المعادن البلورية الفردية والكتل النانوية المعدنية المدعومة، لاستكشاف التفاعلات بين CO وذرات المعادن، مع امتداد الدراسات الحديثة إلى مواقع ذرات المعادن الفردية. تم تحديد أكثر تكوينات الربط استقرارًا على أنها الهندسة المنسقة للكربون الطرفي.
قدمت التطورات الأخيرة في تقنيات علم السطح تحت الضغط المحيط، مثل مطيافية الإلكترونات الضوئية تحت الضغط المحيط (AP-XPS) ومطيافية توليد الترددات المتزايدة تحت الأشعة تحت الحمراء والمرئية (IR-Vis SFG)، رؤى حول التفاعلات الجانبية المعتمدة على الكثافة في طبقات CO السطحية. أوضحت هذه الدراسات كل من آليات التفاعل المباشر وغير المباشر، بينما كشفت التحقيقات المدعومة بالليزر عن ديناميات عمليات الامتصاص والانفصال بدقة زمنية في الفمتوثانية. تناقش الورقة أيضًا تطبيق CO ككاشف جزيئي في الكيمياء الحيوية، لا سيما في دراسة مواقع ذرات المعادن الفردية داخل البروتينات. يقدم المؤلفون دراسة تجريبية وحسابية مشتركة حول تفاعل CO مع شبكة تنسيق المنغنيز تيترا بيريديل-بروفين (TPyP) المدعومة بالجرافين، مما يوضح الطبيعة غير المستقرة لربط CO عند مواقع ذرات Co(I) وديناميات السكان المعتمدة على الضغط لهذه المواقع تحت خلفيات CO المتغيرة.
طرق
في هذه الدراسة، استخدم المؤلفون حسابات نظرية الوظائف الكثافة (DFT) باستخدام حزمة Quantum ESPRESSO للتحقيق في نظام MnTPyP-Co/Gr. تم بناء نماذج شريحة مع شروط حدود دورية، مع ضمان وجود فجوة فراغية لا تقل عن 15 Å بين النسخ الدورية. تم استبعاد دعم Ir(111) بناءً على النتائج السابقة التي تشير إلى تأثيره الضئيل على الطبقة العليا. استخدمت خلية السطح المائلة متجهات الشبكة بقيم $a = 28.36 \, \text{Å}$، $b = 20.23 \, \text{Å}$، وزاوية في المستوى قدرها $135.1^\circ$، تحتوي على جزيئين من MnTPyP-Co موضوعة على بعد 3 Å فوق ورقة جرافين تتكون من 70 سداسي.
تم إجراء حسابات ذات استقطاب مغزلي باستخدام الوظيفة Perdew-Burke-Ernzerhof (PBE) ضمن تقريب التدرج العام (GGA)، مع تضمين التفاعلات الكولومبية في الموقع لحالات 3d من Mn وCo عبر طريقة DFT + U، مع $U(\text{Mn}) = 3.2 \, \text{eV}$ و$U(\text{Co}) = 6.12 \, \text{eV}$. تم أخذ قوى التشتت بعيدة المدى في الاعتبار باستخدام تصحيح Grimme D3. استخدمت الدراسة إمكانيات فاندربيلت فائقة النعومة لتفاعلات القلب-الفلز، مع تحديد حدود دالة الموجة وكثافة الشحنة عند 60 و240 Ry، على التوالي. تم إجراء تحسين الهندسة باستخدام خوارزمية Broyden-Fletcher-Goldfarb-Shanno (BFGS)، مع معايير تقارب صارمة. تم إجراء أخذ عينات من منطقة بريلوان باستخدام شبكة Monkhorst-Pack بحجم $2 \times 4 \times 1$ للحسابات الذاتية الاتساق وشبكة بحجم $4 \times 8 \times 1$ للتقييمات غير الذاتية الاتساق. تم تحليل نقل الشحنة من خلال تحليل Bader، وتم إنشاء خرائط فرق كثافة الشحنة عن طريق طرح كثافات المكونات المعزولة من النظام المشترك.
نتائج
تركز النتائج المقدمة في هذا القسم على طيف المستوى الأساسي لطبقة MnTPyP-Co/Gr، مع تسليط الضوء على وجود أنواع Mn(III) وCo(I)، كما يتضح من أطياف Co 2p وMn 2p. يكشف طيف Co 2p عن أربعة مكونات متميزة، مع نسبة الطاقة الأقل المنسوبة إلى تأثير شاشة غونارسون-شونهايمر، بينما يظهر طيف Mn انقسام مضاعف مشابه. من الجدير بالذكر أنه عند إدخال خلفية من أحادي أكسيد الكربون (CO)، تحدث تغييرات كبيرة في طيف O 1s، مما يشير إلى ربط CO في مواقع Co. تتوافق القمة الأكثر بروزًا عند 534.1 eV مع CO الممتص على ذرة معدن، بينما تشير قمة أصغر عند 532.7 eV إلى تلوث بالأكسجين الذري.
توضح الدراسة أيضًا التفاعلات الإلكترونية أثناء ربط CO، مما يدل على أن طيف Co يتغير بشكل كبير، مما يشير إلى كبح نقل الشحنة وانزياح أحمر في مكونات الانقسام المضاعف. تكشف كثافة الحالات المحسوبة عن تداخل بين مدارات Co d وحالات CO p*، مع تقدير حالة أكسدة Co عند +1 بعد ربط CO. تشير تحليل بيانات الطيف الاهتزازي إلى وجود رنينين اهتزازيين متميزين مرتبطين برابط CO، مما يشير إلى تفاعل معقد يتأثر بالهيكل الإلكتروني لنظام MnTPyP-Co. يتم نمذجة ملف امتصاص CO باستخدام إيزوثيرم تيمكين ومعادلة هيل، مما يكشف عن آلية امتصاص غير تعاونية مع طاقة امتصاص محسوبة تبلغ 0.73 eV، مما يدل على ربط ضعيف ورابط قابل للعكس في درجة حرارة الغرفة. تبرز هذه الدراسة التفاعل المعقد بين تنسيق المعادن، الهيكل الإلكتروني، وديناميات الامتصاص في نظام MnTPyP-Co/Gr.
مناقشة
في هذا القسم، يوضح المؤلفون طرق إعداد العينات الدقيقة وطرق التوصيف المستخدمة للتحقيق في شبكة تنسيق المنغنيز والكوبالت على ورقة جرافين. تم تنظيف سطح Ir(111) باستخدام التفجير والحرارة، تلاه نمو طبقة جرافين واحدة من خلال التحلل الحراري للإيثيلين. تم إجراء ترسيب كلوريد المنغنيز (III) ميسو-تيترا (4-بيريديل) بورفين تحت ظروف فراغ فائق (UHV)، مما يضمن إزالة الملوثات وتحقيق معدل نمو متحكم للحفاظ على تغطية أحادية الطبقة. بعد ذلك، تم ترسيب ذرات الكوبالت عبر الترسيب بالبخار الفيزيائي (PVD) لتشكيل هيكل ثنائي المعدن، مع معايرة دقيقة لمعدلات الترسيب لمنع التكتل.
استخدم المؤلفون تقنيات طيفية متقدمة، بما في ذلك مطيافية توليد الترددات المتزايدة تحت الأشعة تحت الحمراء والمرئية (IR-Vis SFG) ومطيافية الإلكترونات الضوئية تحت الضغط المحيط (AP-XPS)، لتحليل الخصائص الهيكلية والإلكترونية لشبكة التنسيق. تكشف النتائج أن أحادي أكسيد الكربون يرتبط بشكل انتقائي بمواقع Co(I)، مع كون الامتصاص معتمدًا على الضغط وقابلًا للعكس تمامًا. تشير سلوكيات الامتصاص غير التعاونية الملاحظة، التي تم نمذجتها بواسطة إيزوثيرم تيمكين وهيل، إلى أن التفاعلات الإلكترونية والمغناطيسية داخل الشبكة الجزيئية تلعب دورًا كبيرًا، بدلاً من التفاعلات المباشرة بين ثنائي القطب. لا تعزز هذه الرؤى فقط فهم ديناميات الربط عند مواقع ذرات المعادن الفردية، بل تؤكد أيضًا على إمكانيات الشبكات المعدنية العضوية للتطبيقات في التحفيز واستشعار الجزيئات تحت ظروف ضغط متغيرة.
DOI: https://doi.org/10.1039/d5ta10405j
Publication Date: 2026-01-01
Author(s): Michela De Col et al.
Primary Topic: Metal-Organic Frameworks: Synthesis and Applications
Overview
The research investigates the selective ligation of carbon monoxide (CO) to nitrogen tetra-coordinated Co(I) single metal atom sites within a manganese-cobalt bi-metallic coordination network self-assembled on graphene at room temperature. The study reveals that the binding state is metastable, influenced by pressure-dependent equilibrium between adsorption and desorption, with a binding energy of 0.73 eV and an upright, end-on bonding geometry. The CO uptake is characterized by a saturation curve modeled using Temkin and Hill isotherms, indicating network-mediated anti-cooperative adsorption, which is attributed to electronic and magnetic effects rather than direct dipole-dipole interactions.
The findings underscore the reversible and pressure-dependent nature of CO adsorption, with saturation occurring above 10^-3 mbar. Spectroscopic and computational analyses confirm weak Co-CO bonding, with both fundamental and hot-band excitations of the CO stretch mode observed under infrared irradiation. This work provides valuable insights into ligand dynamics at single metal atom sites in two-dimensional materials, suggesting that surface-constrained metal-organic networks can be designed for tunable reactivity under ambient conditions. The methodology presented may facilitate the exploration of reactivity properties of various metal combinations in 2D materials across a wide pressure range, enhancing applications in catalysis and molecular sensing.
Introduction
The introduction of this research paper highlights the significance of carbon monoxide (CO) adsorption on surfaces, a topic that has been pivotal in surface science since the advent of ultrahigh vacuum (UHV) studies. The research aims to enhance the understanding of adsorption and bond formation processes to develop advanced model catalysts for efficient CO-related catalytic reactions. Various systems, including single crystal metal surfaces and supported metal nanoclusters, have been utilized to explore the interactions between CO and metal atoms, with recent studies extending to single metal atom sites. The most stable bonding configuration identified is the terminal carbon-coordinated geometry.
Recent advancements in ambient-pressure surface science techniques, such as Ambient Pressure X-ray Photoelectron Spectroscopy (AP-XPS) and Infrared-Visible Sum-Frequency Generation Spectroscopy (IR-Vis SFG), have provided insights into the density-dependent lateral interactions in surface CO layers. These studies have elucidated both direct and indirect interaction mechanisms, while laser-assisted pump-probe investigations have revealed the dynamics of adsorption and desorption processes at femtosecond time resolution. The paper also discusses the application of CO as a molecular probe in biochemistry, particularly in studying single metal atom sites within proteins. The authors present a combined experimental and computational study on the interaction of CO with a manganese tetrapyridyl-porphyrin (TPyP) coordination network supported by graphene, demonstrating the metastable nature of CO ligation at Co(I) single atom sites and the pressure-dependent population dynamics of these sites under varying CO backgrounds.
Methods
In this study, the authors employed density functional theory (DFT) calculations using the Quantum ESPRESSO package to investigate the MnTPyP-Co/Gr system. Slab models were constructed with periodic boundary conditions, ensuring a vacuum gap of at least 15 Å between periodic replicas. The Ir(111) support was excluded based on previous findings indicating its negligible influence on the overlayer. The oblique surface cell utilized lattice vectors of $a = 28.36 \, \text{Å}$, $b = 20.23 \, \text{Å}$, and an in-plane angle of $135.1^\circ$, containing two MnTPyP-Co molecules positioned 3 Å above a graphene sheet comprising 70 hexagons.
Spin-polarized calculations were conducted using the Perdew-Burke-Ernzerhof (PBE) functional within the generalized gradient approximation (GGA), incorporating on-site Coulomb interactions for Mn and Co 3d states via the DFT + U method, with $U(\text{Mn}) = 3.2 \, \text{eV}$ and $U(\text{Co}) = 6.12 \, \text{eV}$. Long-range dispersion forces were accounted for using Grimme’s D3 correction. The study utilized Vanderbilt ultrasoft pseudopotentials for core-valence interactions, with wavefunction and charge-density cut-offs set to 60 and 240 Ry, respectively. Geometry optimization was performed using the Broyden-Fletcher-Goldfarb-Shanno (BFGS) algorithm, with strict convergence criteria. Brillouin-zone sampling was conducted with a $2 \times 4 \times 1$ Monkhorst-Pack grid for self-consistent calculations and a $4 \times 8 \times 1$ grid for non-self-consistent evaluations. Charge transfer was analyzed through Bader analysis, and charge-density difference maps were generated by subtracting the densities of isolated components from the combined system.
Results
The results presented in this section focus on the core level spectra of the MnTPyP-Co/Gr layer, highlighting the presence of Mn(III) and Co(I) species, as evidenced by the Co 2p and Mn 2p spectra. The Co 2p spectrum reveals four distinct components, with the lowest energy peak attributed to the Gunnarsson-Schönhammer screening effect, while the Mn spectrum shows similar multiplet splitting. Notably, upon introducing a carbon monoxide (CO) background, significant changes occur in the O 1s spectrum, indicating CO ligation at Co sites. The most prominent peak at 534.1 eV corresponds to CO adsorbed on a metal atom, while a smaller peak at 532.7 eV suggests atomic oxygen contamination.
The study further elucidates the electronic interactions during CO ligation, demonstrating that the Co spectrum is significantly altered, indicating charge transfer suppression and a redshift in multiplet splitting components. The calculated density of states reveals hybridization between Co d orbitals and CO p* states, with the Co oxidation state estimated at +1 after CO binding. The analysis of vibrational spectroscopy data indicates the presence of two distinct vibrational resonances associated with CO ligation, suggesting a complex interaction influenced by the electronic structure of the MnTPyP-Co system. The uptake profile of CO is modeled using the Temkin isotherm and Hill equation, revealing an anti-cooperative adsorption mechanism with a calculated adsorption energy of 0.73 eV, indicative of weak binding and reversible ligation at room temperature. This study highlights the intricate interplay between metal coordination, electronic structure, and adsorption dynamics in the MnTPyP-Co/Gr system.
Discussion
In this section, the authors detail the meticulous sample preparation and characterization methods employed to investigate a manganese-cobalt coordination network on a graphene sheet. The Ir(111) surface was cleaned using sputtering and annealing, followed by the growth of a single graphene layer through thermal decomposition of ethylene. The deposition of Mn(III) meso-tetra (4-pyridyl) porphin chloride was conducted under ultra-high vacuum (UHV) conditions, ensuring the removal of contaminants and achieving a controlled growth rate to maintain a monolayer coverage. Subsequently, cobalt adatoms were deposited via physical vapor deposition (PVD) to form a bi-metallic heterostructure, with careful calibration of deposition rates to prevent clustering.
The authors employed advanced spectroscopic techniques, including infrared-visible sum-frequency generation (IR-Vis SFG) spectroscopy and ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), to analyze the structural and electronic properties of the coordination network. The findings reveal that carbon monoxide selectively ligates to Co(I) sites, with adsorption being pressure-dependent and fully reversible. The observed anti-cooperative adsorption behavior, modeled by Temkin and Hill isotherms, suggests that electronic and magnetic interactions within the molecular network play a significant role, rather than direct dipole-dipole interactions. These insights not only enhance the understanding of ligand dynamics at single metal atom sites but also underscore the potential of metal-organic networks for applications in catalysis and molecular sensing under varying pressure conditions.
