ضبط النشاط المانح للإلكترون في الأطر المعدنية العضوية نحو مولدات الطاقة الكهربائية القابلة للتشغيل الذاتي عالية الأداء Tuning of Electron-Donating Metal–Organic Frameworks toward High-Performance Triboelectric Nanogenerators for Self-Powered Shear Sensing

شارك:
المجلة: ACS Applied Materials & Interfaces، المجلد: 18، العدد: 12
DOI: https://doi.org/10.1021/acsami.5c22950
PMID: https://pubmed.ncbi.nlm.nih.gov/41771788
تاريخ النشر: 2026-03-02
المؤلف: Tianhuai Xu وآخرون
الموضوع الرئيسي: مواد الاستشعار المتقدمة وجمع الطاقة

نظرة عامة

تقدم هذه البحث نهجًا جديدًا لتعزيز أداء مولدات الطاقة الكهروستاتيكية (TENGs) من خلال دمج حشوات الإطار العضوي المعدني (MOF) المفعلة التي تمنح الإلكترونات في مصفوفة بوليمر البولي يوريثين (PU). تدرس الدراسة بشكل منهجي تأثيرات ثلاث مجموعات وظيفية (-CH₃، -NH₂، و -OH) على الخصائص الكهروستاتيكية للأغشية المركبة الناتجة. أظهر MOF المعدل بـ -OH أعلى إنتاج كهربائي، حيث حقق 197.6 ± 1.3 فولت و0.47 ± 0.08 ميكرو أمبير/سم²، مما يمثل تحسينات كبيرة بمقدار 2.3 و3.2 مرات مقارنةً بـ PU النقي. يُعزى الأداء المحسن إلى توطين الإلكترونات بالقرب من حشوات MOF، كما تم توضيحه من خلال تحليلات كيميائية وميكانيكية متقدمة، إلى جانب رؤى نظرية من نظرية الكثافة الوظيفية (DFT).

تم التحقق من جهاز TENG المحسن في تكوين مستشعر قصي ذو قطب واحد، مما يظهر حساسيته العالية لاكتشاف الحركة. لا يساهم هذا العمل فقط في تعزيز فهم المواد القائمة على MOF لتطبيقات TENG، بل يبرز أيضًا الإمكانية لتطوير تقنيات استشعار ذاتية الطاقة مستدامة ومتوافقة حيويًا. ستتطلب التطبيقات المستقبلية في مجالات القابلية للارتداء والطب الحيوي تقييمات شاملة للتوافق الحيوي، والاستقرار على المدى الطويل، واستراتيجيات لتعزيز مقاومة الرطوبة والمتانة، مثل تشحيم السطح وهندسة المجموعات الوظيفية لحشوات MOF.

مقدمة

تسلط مقدمة هذه الورقة البحثية الضوء على الطلب المتزايد على المستشعرات عالية الأداء في سياق التقدم السريع في الذكاء الاصطناعي وإنترنت الأشياء (IoT). تُقدم مولدات الطاقة الكهروستاتيكية (TENGs) كبدائل واعدة للمستشعرات التقليدية نظرًا لقدراتها الذاتية الطاقة وسهولة تصنيعها. تقوم مستشعرات TENG بتحويل المدخلات الميكانيكية الديناميكية إلى إشارات كهربائية من خلال الكهربة بالاتصال والتحريض الكهروستاتيكي، مما يوفر مزايا مثل الحساسية العالية للقوى الديناميكية. ومع ذلك، فإن التحديات مثل الحساسية المنخفضة والخيارات المحدودة من المواد للطبقات الإيجابية tribo تعيق اعتمادها الأوسع.

تؤكد الورقة على الحاجة إلى مواد إيجابية tribo مستدامة ومتوافقة حيويًا، حيث تثير العديد من الخيارات الحالية مخاوف بيئية وصحية. تناقش استراتيجيات لتعزيز الأداء الكهروستاتيكي، خصوصًا من خلال دمج المجموعات الوظيفية القطبية عبر تعديل السطح ودمج الحشوات. من الجدير بالذكر أن الإطارات العضوية المعدنية (MOFs) ظهرت كحشوات فعالة للتشويب الكيميائي، حيث أظهرت الدراسات السابقة تحسينات كبيرة في أداء الإنتاج. يقترح المؤلفون أن المجموعات المانحة للإلكترونات في المواد الإيجابية tribo، باستخدام البولي يوريثين (PU) كمصفوفة وتفعيل MOF UiO-66، يمكن أن تعزز حساسية المستشعر. تهدف الدراسة إلى توضيح الآليات وراء تحسين نقل الشحنة والتحقق من أداء جهاز TENG المطور كمستشعر قصي عالي الحساسية.

طرق

في هذه الدراسة، تم الحصول على جميع المواد الكيميائية المستخدمة من موردين تجاريين. تضمنت المواد الأساسية Sylgard 184، وهو مطاط PDMS ووكيل تجفيف من Dow Corning، وكلوريد الزركونيوم بالإضافة إلى البولي يوريثين من Sigma-Aldrich. بالإضافة إلى ذلك، تم الحصول على حمض التيريفثاليت (BDC = 1,4-benzenedicarboxylate) من Acros Organics، بينما تم الحصول على حمض 2-methylterephthalic وحمض 2-hydroxyterephthalic من Fluorochem. أخيرًا، تم الحصول على حمض 2-aminoterephthalic من Thermo Fisher. كانت هذه المواد جزءًا لا يتجزأ من الإجراءات التجريبية الموضحة في الدراسة.

النتائج

يقدم قسم “النتائج” في الورقة البحثية النتائج الرئيسية المستمدة من التجارب أو التحليلات التي تم إجراؤها. يسلط الضوء على النتائج المهمة التي تدعم الفرضيات أو الأسئلة البحثية المطروحة في الدراسة. عادةً ما تكون النتائج مصحوبة ببيانات إحصائية ذات صلة، أو أشكال، أو جداول توضح الاتجاهات والأنماط الملحوظة.

في هذا القسم، يناقش المؤلفون تداعيات نتائجهم، ويربطونها بالأدبيات الموجودة والأطر النظرية. قد يتناولون أيضًا أي نتائج غير متوقعة وتأثيرها المحتمل على مجال الدراسة. بشكل عام، يخدم هذا القسم في التحقق من أهداف البحث والمساهمة في الفهم الأوسع للموضوع قيد التحقيق.

المناقشة

في هذا القسم، يتم مناقشة تخليق وتوصيف جزيئات UiO-66-X ودمجها في مولدات الطاقة الكهروستاتيكية (TENGs) من البولي يوريثين (PU). تم تخليق مشتقات UiO-66-X، المفعلة بمجموعات مختلفة (-H، -CH₃، -NH₂، و -OH)، من خلال طريقة متسقة تتضمن كلوريد الزركونيوم وحمض التيريفثاليت في DMF، تليها التنشيط. تم دمج الجزيئات الناتجة في مصفوفة PU بتحميل 2 وزني%، مما يعزز الخصائص الميكانيكية والكهربائية للأفلام المركبة. أكدت تقنيات التوصيف، بما في ذلك FESEM، XRD، FTIR، وطيف رامان، نجاح التخليق والاحتفاظ بالهيكل البلوري لمشتقات UiO-66، مع وجود التفعيل الذي أدى إلى ميزات طيفية مميزة تشير إلى البيئة الكيميائية المعدلة.

تم تقييم أداء TENGs، مما كشف أن دمج UiO-66 حسّن بشكل كبير من المخرجات الكهروستاتيكية مقارنةً بـ PU النقي. على وجه التحديد، أظهر المركب UiO-66-OH@PU أعلى أداء، حيث حقق جهد دائرة مفتوحة قدره 197.6 فولت وكثافة شحنة منقولة قدرها 2.05 نانو كولوم/سم²، مما يمثل تحسينات كبيرة مقارنةً بـ PU غير المعدل. تم عزو هذه التحسينات إلى زيادة خشونة السطح، وتعزيز قدرات احتجاز الشحنة، والطبيعة المانحة للإلكترونات للمجموعات الوظيفية. بالإضافة إلى ذلك، أظهر جهاز TENG تطبيقات واعدة في استشعار الحركة القصية، مع محاكاة تشير إلى أن تكوين الأقطاب المتداخلة يمكن أن يعزز بشكل فعال إشارات الخرج خلال أحداث الانزلاق. بشكل عام، تؤكد النتائج على إمكانيات MOFs المفعلة في تحسين أداء TENGs لتطبيقات جمع الطاقة والاستشعار.

Journal: ACS Applied Materials & Interfaces, Volume: 18, Issue: 12
DOI: https://doi.org/10.1021/acsami.5c22950
PMID: https://pubmed.ncbi.nlm.nih.gov/41771788
Publication Date: 2026-03-02
Author(s): Tianhuai Xu et al.
Primary Topic: Advanced Sensor and Energy Harvesting Materials

Overview

This research presents a novel approach to enhance the performance of triboelectric nanogenerators (TENGs) by incorporating electron-donating functionalized metal-organic framework (MOF) fillers into a polyurethane (PU) polymer matrix. The study systematically investigates the effects of three functional groups (-CH₃, -NH₂, and -OH) on the triboelectric properties of the resulting composite membranes. The -OH-modified MOF demonstrated the highest electrical output, achieving 197.6 ± 1.3 V and 0.47 ± 0.08 μA/cm², which represent significant improvements of 2.3 and 3.2 times over the pristine PU. The enhanced performance is attributed to the localization of electrons near the MOF fillers, as elucidated through advanced chemical and mechanical analyses, alongside theoretical insights from density functional theory (DFT).

The optimized TENG device was further validated in a single-electrode shear sensor configuration, showcasing its high sensitivity for motion detection. This work not only advances the understanding of MOF-based materials for TENG applications but also highlights the potential for developing sustainable and biocompatible self-powered sensing technologies. Future applications in wearable and biomedical fields will necessitate thorough assessments of biocompatibility, long-term stability, and strategies to enhance moisture resistance and durability, such as surface lubrication and functional-group engineering of the MOF fillers.

Introduction

The introduction of this research paper highlights the increasing demand for high-performance sensors in the context of rapid advancements in artificial intelligence and the Internet of Things (IoT). Triboelectric nanogenerators (TENGs) are presented as promising alternatives to conventional sensors due to their self-powered capabilities and ease of fabrication. TENG sensors convert dynamic mechanical inputs into electrical signals through contact electrification and electrostatic induction, offering advantages such as high sensitivity to dynamic forces. However, challenges such as low sensitivity and limited material options for tribo-positive layers hinder their broader adoption.

The paper emphasizes the need for sustainable and biocompatible tribo-positive materials, as many existing options raise environmental and health concerns. It discusses strategies for enhancing triboelectric performance, particularly through the incorporation of polar functional groups via surface modification and filler incorporation. Notably, metal-organic frameworks (MOFs) have emerged as effective fillers for chemical doping, with previous studies demonstrating significant improvements in output performance. The authors propose that electron-donating groups in tribo-positive materials, specifically using polyurethane (PU) as a matrix and functionalizing UiO-66 MOF, can enhance sensor sensitivity. The study aims to elucidate the mechanisms behind improved charge transfer and validate the performance of the developed TENG device as a highly sensitive shear sensor.

Methods

In this study, all chemicals utilized were sourced from commercial suppliers. The primary materials included Sylgard 184, a PDMS elastomer and curing agent from Dow Corning, and zirconium chloride along with polyurethane from Sigma-Aldrich. Additionally, terephthalic acid (BDC = 1,4-benzenedicarboxylate) was acquired from Acros Organics, while 2-methylterephthalic acid and 2-hydroxyterephthalic acid were obtained from Fluorochem. Lastly, 2-aminoterephthalic acid was sourced from Thermo Fisher. These materials were integral to the experimental procedures outlined in the study.

Results

The “Results” section of the research paper presents key findings derived from the conducted experiments or analyses. It highlights significant outcomes that support the hypotheses or research questions posed in the study. The results are typically accompanied by relevant statistical data, figures, or tables that illustrate the trends and patterns observed.

In this section, the authors discuss the implications of their findings, relating them to existing literature and theoretical frameworks. They may also address any unexpected results and their potential impact on the field of study. Overall, this section serves to validate the research objectives and contribute to the broader understanding of the topic under investigation.

Discussion

In this section, the synthesis and characterization of UiO-66-X nanoparticles and their integration into polyurethane (PU) triboelectric nanogenerators (TENGs) are discussed. The UiO-66-X derivatives, functionalized with various groups (-H, -CH₃, -NH₂, and -OH), were synthesized through a consistent method involving zirconium chloride and terephthalic acid in DMF, followed by activation. The resulting nanoparticles were incorporated into a PU matrix at a 2 wt% loading, enhancing the mechanical and electrical properties of the composite films. Characterization techniques, including FESEM, XRD, FTIR, and Raman spectroscopy, confirmed the successful synthesis and retention of the crystalline structure of the UiO-66 derivatives, with functionalization leading to distinct spectral features indicative of the modified chemical environment.

The performance of the TENGs was evaluated, revealing that the incorporation of UiO-66 significantly improved triboelectric outputs compared to pristine PU. Specifically, the UiO-66-OH@PU composite exhibited the highest performance, achieving an open-circuit voltage of 197.6 V and a transferred charge density of 2.05 nC/cm², marking substantial enhancements over the unmodified PU. These improvements were attributed to increased surface roughness, enhanced charge trapping capabilities, and the electron-donating nature of the functional groups. Additionally, the TENG device demonstrated promising applications in shear motion sensing, with simulations indicating that the configuration of interdigitated electrodes could effectively enhance output signals during sliding events. Overall, the findings underscore the potential of functionalized MOFs in optimizing the performance of TENGs for energy harvesting and sensing applications.