ضبط تفاعل المحفزات الضوئية g-C3N4 باستخدام تقنيات تقشير الطور السائل Tuning the reactivity of g-C3N4 photocatalysts using liquid phase exfoliation

شارك:
المجلة: npj 2D Materials and Applications، المجلد: 10، العدد: 1
DOI: https://doi.org/10.1038/s41699-026-00690-5
تاريخ النشر: 2026-04-02
المؤلف: Jacob Brown وآخرون
الموضوع الرئيسي: تقنيات التحفيز الضوئي المتقدمة

نظرة عامة

تناقش هذه القسم التقدم في التحفيز الضوئي كطريقة مستدامة لمعالجة قضايا جودة المياه العالمية من خلال تحلل الملوثات العضوية في الماء. يبرز البحث إمكانيات أشباه الموصلات الطبقية، وخاصة نيتريد الكربون الجرافيتي (g-C₃N₄) ومواد ثنائية الأبعاد الأخرى، كتحفيزات ضوئية فعالة. ومع ذلك، فإن الطرق التقليدية لتعزيز تفاعل هذه المواد غالبًا ما تتضمن عمليات كيميائية معقدة تشكل تحديات في القابلية للتوسع والاستدامة بسبب استخدام المواد الكيميائية السامة.

يقدم المؤلفون نهجًا جديدًا باستخدام تقنيات تقشير سائلة سريعة من خلال طرق مدفوعة بالقص، مما يحسن بشكل كبير الأداء التحفيزي لـ g-C₃N₄، محققًا زيادة تصل إلى 2.5 مرة في كفاءة إزالة ملوثات الأصباغ العضوية مقارنةً بنظيرها الكتلي. بالإضافة إلى ذلك، يظهر البحث أن الهياكل غير العضوية العضوية، مثل g-C₃N₄/MoS₂، تتمتع أيضًا بأداء متفوق، حيث تم تحديد تقشير القص كعامل رئيسي لهذا التحسين. يتم استكشاف الآليات الكامنة وراء هذه التحسينات، ويتم التحقق من فعالية المحفزات في تحلل ملوثات نموذجية متنوعة، بما في ذلك تلك التي تحتوي على روابط كربون-فلور (C-F) الموجودة في الملوثات البيئية المستمرة.

مقدمة

تسلط المقدمة الضوء على التحدي العالمي الحاسم لجودة المياه والوصول إلى مياه شرب نظيفة، وهو أمر ضروري لمنع العديد من الوفيات المرتبطة بالأمراض المعوية. تؤكد على الحاجة إلى تحسين تقنيات المعالجة لمعالجة المواد السامة المستمرة والمتراكمة حيويًا (PBTs) مثل المواد الفلورية (PFAS) والأدوية وأصباغ النسيج. تقترح عمليات الأكسدة المتقدمة (AOPs) كحل، خاصة من خلال التحفيز الضوئي الشمسي، الذي يمكن أن يقلل من التكاليف المرتبطة بالطرق التقليدية التي تتطلب طاقة عالية. يناقش القسم قيود المواد التحفيزية الضوئية الحالية، ولا سيما ثاني أكسيد التيتانيوم (TiO₂)، بسبب فجوة النطاق الكبيرة والسمية الجينية المحتملة، داعيًا لاستخدام نيتريد الكربون الجرافيتي (g-C₃N₄) كبديل أكثر استدامة.

يركز البحث على تقشير المرحلة السائلة (LPE) لـ g-C₃N₄ باستخدام مذيبات صديقة للبيئة مثل الإيثانول والماء لتعزيز نشاطه التحفيزي الضوئي ضد الملوثات الصعبة، بما في ذلك تلك التي تحتوي على روابط كربون-فلور (C-F). يهدف البحث إلى استكشاف قابلية التوسع لـ LPE لإنتاج محفزات ضوئية طبقية والتحقيق في إمكانية دمج g-C₃N₄ المقشر بالقص مع صفائح MoS₂ لتشكيل هياكل غير عضوية قد تحسن الأداء التحفيزي الضوئي. بشكل عام، يسعى العمل إلى تعزيز تطوير مواد تحفيزية ضوئية فعالة ومستدامة لتطبيقات معالجة مياه الصرف الصحي.

طرق

في هذا القسم، يصف المؤلفون الطرق المستخدمة لتقشير g-C$_3$N$_4$ وتخليق صفائح MoS$_2$. تم استخدام تقنيتين للتقشير: واحدة تستخدم جهاز خلط صناعي (Silverson L5M-A) يعمل بسرعة 9000 دورة في الدقيقة مع التحكم في درجة الحرارة عند 10 درجات مئوية، تُعرف بالطريقة H؛ والأخرى تتضمن خلاط مطبخ AMZChef المعدل، يعمل بسرعة تقارب 11,000 دورة في الدقيقة في دورة من دقيقة واحدة “تشغيل” ودقيقتين “إيقاف”، يتم التحكم فيها بواسطة مرحل Arduino، تُعرف بالطريقة B. تم إجراء جميع عمليات التقشير لطريقة الخلاط باستخدام ماء منزوع الأيونات بنسبة 100%. تم الحصول على عينات g-C$_3$N$_4$ من دفعتين متميزتين (XFNano XFI10)، تم تحديدهما على أنهما #100548 و #101424.

لتخليق صفائح MoS$_2$، تم استخدام مسحوق كبريتيد الموليبدينوم (IV) (Sigma-Aldrich 69860) كمواد أولية، والتي تطلبت خطوات تنقية إضافية لم يتم تفصيلها في هذا القسم. شملت المذيبات المستخدمة الإيثانول من الدرجة التحليلية والماء منزوع الأيونات الذي تم إنتاجه داخليًا عبر التناضح العكسي. تم استخدام الأصباغ العضوية، وخاصة إنديجو كارمين، وحمض أحمر 266، ورودامين B، دون معالجة إضافية، تم الحصول عليها من Thermo Scientific وSigma-Aldrich.

نتائج

تفصل قسم النتائج تخليق وقابلية تشتت مسحوق g-C₃N₄ الكتلي، المشتق من الميلامين، لتطبيقات التحفيز الضوئي. تم تحقيق تقشير g-C₃N₄ من خلال تقشير المرحلة السائلة (LPE) باستخدام طريقتين عاليتي القص: جهاز خلط عالي السرعة وخلاط معدل. تم حساب طاقة الربط بين الطبقات لـ g-C₃N₄ لتكون بين 0.3321 و 0.4247 J m⁻²، مما أبلغ المعلمات التشغيلية لطرق LPE، مما يضمن أن كلا الطريقتين تجاوزتا معدل القص الحرج اللازم للتقشير الفعال. استكشفت الدراسة أيضًا استخدام مذيبات متنوعة، وخلصت إلى أن خلطات الماء والكحول، وخاصة 80% حجم الإيثانول، توفر أفضل قابلية تشتت لـ g-C₃N₄، مع ملاحظات على اختلافات بين دفعات مختلفة من المادة.

بالإضافة إلى ذلك، أشارت الأطياف البصرية إلى وجود ملوثات من عملية البوليمرة، والتي اختلفت عبر الدفعات. تشير النتائج إلى أنه بينما تقدم الأدبيات الحالية آراء متضاربة حول أفضل المذيبات لتقشير g-C₃N₄، فإن استخدام المذيبات المستدامة أمر بالغ الأهمية للتطبيقات التي تهدف إلى معالجة الملوثات في الماء. تسلط النتائج الضوء على أهمية اختيار المذيبات وطرق التقشير في تعزيز النشاط التحفيزي الضوئي لـ g-C₃N₄، مع آثار على الأبحاث المستقبلية والتطبيقات العملية في التخفيف البيئي.

مناقشة

في هذا القسم، تم التحقيق في الأداء التحفيزي الضوئي لـ g-C₃N₄ المقشر بالقص في مذيبات الإيثانول/الماء، مما كشف عن تحسينات كبيرة في تحلل الملوثات مقارنةً بـ g-C₃N₄ الكتلي. أدت مدة التقشير المثلى البالغة 90 دقيقة إلى معدل تفاعل من الدرجة الأولى الزائفة قدره $k_{90} = 0.0054 \, \text{min}^{-1}$، بزيادة 2.1 مرة عن معدل المادة الكتلية $k = 0.0026 \, \text{min}^{-1}$. يُعزى هذا التحسين إلى تقليل حجم الجسيمات من حوالي 30 ميكرومتر إلى 2 ميكرومتر، مما يزيد من المساحة السطحية النوعية ويقلل من المسافة لهجرة أزواج الإلكترون والثقب، مما يعزز النشاط التحفيزي الضوئي. كما لاحظت الدراسة أنه بينما أسفر التقشير الإضافي بعد 10 دقائق عن عوائد متناقصة، تم الحفاظ على سلامة هيكل g-C₃N₄، كما يتضح من تحليلات رامان وFTIR.

بالإضافة إلى ذلك، استكشفت الأبحاث آثار طرق التقشير المختلفة والمذيبات على الأداء التحفيزي الضوئي. أنتج كل من الخلط عالي القص وتقشير القص المضطرب جودة مادة قابلة للمقارنة، حيث أسفر الأخير عن أداء أفضل قليلاً على الرغم من ميله للتجمع مع مرور الوقت. أظهرت اختبارات التحلل التحفيزي الضوئي أن g-C₃N₄ المقشر تفوق بشكل كبير على g-C₃N₄ الكتلي عبر ملوثات نموذجية متنوعة، محققًا معدلات تحلل أكبر بمقدار 2-2.5 مرة للأصباغ مثل إنديجو كارمين ورودامين B. تشير النتائج إلى أنه بينما يعزز عملية التقشير النشاط التحفيزي، فإن اختيار المذيب والطريقة يلعب أيضًا دورًا حاسمًا في تحسين الأداء، مما يشير إلى الحاجة لمزيد من الاستكشاف لمذيبات بديلة لتحسين كفاءة التقشير.

Journal: npj 2D Materials and Applications, Volume: 10, Issue: 1
DOI: https://doi.org/10.1038/s41699-026-00690-5
Publication Date: 2026-04-02
Author(s): Jacob Brown et al.
Primary Topic: Advanced Photocatalysis Techniques

Overview

This section discusses the advancements in photocatalysis as a sustainable method for addressing global water quality issues by degrading organic pollutants in water. The study highlights the potential of layered semiconductors, particularly graphitic carbon nitride (g-C₃N₄) and other two-dimensional materials, as effective photocatalysts. However, traditional methods for enhancing the reactivity of these materials often involve complex chemical processes that pose scalability and sustainability challenges due to the use of toxic reagents.

The authors present a novel approach using rapid liquid phase exfoliation through shear-driven methods, which significantly improves the catalytic performance of g-C₃N₄, achieving up to a 2.5-fold increase in the removal efficiency of organic dye pollutants compared to its bulk counterpart. Additionally, the study demonstrates that organic-inorganic heterostructures, such as g-C₃N₄/MoS₂, also exhibit superior performance, with shear exfoliation being identified as the primary factor for this enhancement. The mechanisms underlying these improvements are explored, and the catalysts’ efficacy in degrading various model pollutants, including those with challenging C-F bonds found in persistent environmental contaminants, is validated.

Introduction

The introduction highlights the critical global challenge of water quality and access to clean drinking water, which is essential for preventing numerous faecal-oral disease-related deaths annually. It emphasizes the need for improved treatment technologies to address persistent, bioaccumulative, and toxic substances (PBTs) such as per-and polyfluoroalkyl substances (PFAS), pharmaceuticals, and textile dyes. Advanced oxidation processes (AOPs) are proposed as a solution, particularly through solar-photocatalysis, which can reduce costs associated with traditional energy-intensive methods. The section discusses the limitations of current photocatalytic materials, notably titanium dioxide (TiO₂), due to its large bandgap and potential genotoxicity, advocating for the use of graphitic carbon nitride (g-C₃N₄) as a more sustainable alternative.

The research focuses on the liquid phase exfoliation (LPE) of g-C₃N₄ using environmentally friendly ethanol-water co-solvents to enhance its photocatalytic activity against challenging pollutants, including those with carbon-fluorine (C-F) bonds. The study aims to explore the scalability of LPE for producing layered photocatalysts and to investigate the potential of combining shear-exfoliated g-C₃N₄ with MoS₂ nanosheets to form heterostructures that may improve photocatalytic performance. Overall, the work seeks to advance the development of effective, sustainable photocatalytic materials for wastewater treatment applications.

Methods

In this section, the authors describe the methods used for exfoliating g-C$_3$N$_4$ and synthesizing MoS$_2$ nanosheets. Two exfoliation techniques were employed: one utilizing an industrial homogenizer (Silverson L5M-A) operating at 9000 rpm with temperature control at 10°C, referred to as method H; the other involved a modified AMZChef kitchen blender, running at approximately 11,000 rpm in a cycle of 1 minute ‘on’ and 2 minutes ‘off’, controlled by an Arduino relay, denoted as method B. All exfoliation processes for the blender method were conducted using 100% deionized water. The g-C$_3$N$_4$ samples were sourced from two distinct batches (XFNano XFI10), identified as #100548 and #101424.

For the synthesis of MoS$_2$ nanosheets, molybdenum(IV) sulfide powder (Sigma-Aldrich 69860) was utilized as a precursor, which required additional purification steps not detailed in this section. The solvents used included analytical-grade ethanol and deionized water produced in-house via reverse osmosis. Organic dyes, specifically Indigo Carmine, Acid Red 266, and Rhodamine B, were employed without further processing, sourced from Thermo Scientific and Sigma-Aldrich.

Results

The results section details the synthesis and dispersibility of bulk g-C₃N₄ powder, derived from melamine, for photocatalytic applications. The exfoliation of g-C₃N₄ was achieved through liquid-phase exfoliation (LPE) using two high-shear methods: a high-speed homogenizer and a modified blender. The interlayer binding energy of g-C₃N₄ was calculated to be between 0.3321 and 0.4247 J m⁻², which informed the operational parameters of the LPE methods, ensuring that both techniques exceeded the critical shear rate necessary for effective exfoliation. The study also explored the use of various solvents, concluding that aqueous-alcohol mixtures, particularly 80 vol% ethanol, provided optimal dispersibility for g-C₃N₄, with variations observed between different batches of the material.

Additionally, the optical extinction spectra indicated the presence of contaminants from the polymerization process, which varied across batches. The findings suggest that while existing literature presents conflicting views on the best solvents for g-C₃N₄ exfoliation, the use of sustainable solvents is crucial for applications aimed at pollutant treatment in water. The results highlight the importance of solvent choice and exfoliation methods in enhancing the photocatalytic activity of g-C₃N₄, with implications for future research and practical applications in environmental remediation.

Discussion

In this section, the photocatalytic performance of shear-exfoliated g-C₃N₄ in ethanol/water co-solvents was investigated, revealing significant enhancements in pollutant degradation compared to bulk g-C₃N₄. The optimal exfoliation duration of 90 minutes resulted in a pseudo-first-order reaction rate of $k_{90} = 0.0054 \, \text{min}^{-1}$, a 2.1-fold increase over the bulk material’s rate of $k = 0.0026 \, \text{min}^{-1}$. This improvement is attributed to a reduction in particle size from approximately 30 µm to 2 µm, which increases the specific surface area and reduces the distance for electron-hole pair migration, thereby enhancing photocatalytic activity. The study also noted that while further exfoliation beyond 10 minutes yielded diminishing returns, the structural integrity of g-C₃N₄ was preserved, as evidenced by Raman and FTIR analyses.

Additionally, the research explored the effects of different exfoliation methods and solvents on photocatalytic performance. Both high-shear mixing and turbulent shear exfoliation produced comparable material quality, with the latter yielding slightly better performance despite a tendency to agglomerate over time. The photocatalytic degradation tests demonstrated that exfoliated g-C₃N₄ significantly outperformed bulk g-C₃N₄ across various model pollutants, achieving 2-2.5 times greater degradation rates for dyes like indigo carmine and rhodamine B. The findings suggest that while the exfoliation process enhances catalytic activity, the choice of solvent and method also plays a crucial role in optimizing performance, indicating a need for further exploration of alternative solvents for improved exfoliation efficiency.