DOI: https://doi.org/10.1007/s40820-025-02050-2
PMID: https://pubmed.ncbi.nlm.nih.gov/41611891
تاريخ النشر: 2026-01-30
المؤلف: Pengpeng Li وآخرون
الموضوع الرئيسي: المواد والتقنيات المتقدمة للبطاريات
نظرة عامة
تقدم البحث غشاء نانوي من بولي أميد-أميد (PAI@PEI) مُعدل بواسطة بولي إيثير أميد (PEI) ذاتية الإصلاح مصمم لتعزيز السلامة الحرارية لبطاريات الليثيوم المعدنية. تسهل مجموعات الأميد والأميد القطبية في الغشاء تفكك ونقل أيونات الليثيوم (Li⁺)، وهو أمر حاسم لكبح نمو الدندريت. تُظهر خلية الليثيوم المتماثلة القائمة على PAI@PEI رقم نقل Li⁺ ملحوظ قدره 0.71 وتحافظ على استقرار ممتاز في الدورة عند كثافة تيار تبلغ 1 مللي أمبير سم⁻² لأكثر من 750 ساعة.
يسمح الهيكل المصمم على شكل نواة وقشرة لفاصل PAI@PEI بإغلاق فتحاته عند 400 درجة مئوية واستعادة هيكله عند 350 درجة مئوية، مما يساهم في توصيله الأيوني العالي البالغ 1.63 مللي سيمنز سم⁻¹، وانخفاض جهد النواة الزائد البالغ 54 مللي فولت، وكفاءة كولومبية متوسطة تبلغ 82%. تؤكد حسابات نظرية الكثافة الوظيفية (DFT) أن فاصل PAI@PEI يمكنه تفكيك أيونات Li⁺ وPF₆⁻ من الإلكتروليتات بفعالية، مما يعزز الامتزاز بالقرب من مواقع الألفة لـ PAI وPEI، مما يساعد على كبح نمو دندريت الليثيوم. بالإضافة إلى ذلك، تحتفظ خلايا Li||NCM523 الكاملة بـ 90.0% من سعتها الأولية بعد 100 دورة وتحقق سعة تفريغ قدرها 99.7 مللي أمبير ساعة غرام⁻¹ عند معدل 5C. يوفر هذا البحث رؤى مهمة لتطوير فواصل وظيفية عالية السلامة مناسبة لمجموعة متنوعة من تطبيقات تخزين الطاقة.
مقدمة
تسلط المقدمة الضوء على الحاجة الملحة للتقدم في تقنيات تخزين الطاقة الكهروكيميائية، وخاصة بطاريات الليثيوم المعدنية (LMBs)، المدفوعة بمطالب الكفاءة العالمية واستدامة الطاقة. تُعرف بطاريات LMBs بسعتها النظرية العالية المحددة وبتوترها الكهروكيميائي المنخفض؛ ومع ذلك، فإن المخاوف المتعلقة بالسلامة، والتي تنشأ بشكل أساسي بسبب توليد الحرارة الداخلية وتكوين دندريت الليثيوم، تمثل تحديات كبيرة. تعاني الفواصل الحالية، مثل البولي إيثيلين (PE) والبولي بروبيلين (PP)، على الرغم من كونها فعالة من حيث التكلفة ومستقرة، من ضعف الاستقرار الحراري، مما يؤدي إلى مخاطر حدوث دوائر قصيرة داخلية وانهيار حراري.
لمعالجة هذه القضايا، يقدم البحث تصميم فاصل ذكي جديد: فاصل نانوي من بولي أميد-أميد محاط بقشرة من بولي إيثير أميد (PAI@PEI). يتميز هذا الفاصل بوظيفة تحكم حراري تسمح بإغلاق فتحاته عند درجات حرارة تتجاوز 400 درجة مئوية، وهو أعلى بكثير من الفواصل التقليدية. من المهم أنه يمكنه استعادة فتحاته عند 350 درجة مئوية، مما يوفر قدرة إيقاف حراري عكسي. تعزز مكونات PAI وPEI تفكيك أيونات الليثيوم (Li⁺) وتعزز النقل المتجانس لـ Li⁺، كما تدعمه حسابات نظرية الكثافة الوظيفية (DFT). تُظهر خلية Li||Li الناتجة مع فاصل PAI@PEI رقم نقل Li⁺ مرتفع قدره 0.71 واستقرار استثنائي في الدورة، حيث تحافظ على 90% من السعة على مدى 100 دورة عند 1C، مما يُظهر قدرة الفاصل على تحسين السلامة والأداء لبطاريات LMBs.
طرق
توضح القسم التجريبي من ورقة البحث المنهجيات المستخدمة للتحقيق في الأسئلة البحثية المطروحة. يتناول تصميم التجارب، بما في ذلك اختيار المواد، وتحضير العينات، والإجراءات المحددة المتبعة لضمان قابلية التكرار وموثوقية النتائج. كما يصف القسم التحليلات الإحصائية المستخدمة لتفسير البيانات، مع تسليط الضوء على أهمية النتائج.
تُعرض النتائج الرئيسية من التجارب، مما يُظهر فعالية الطرق المستخدمة. يتم وضع النتائج في سياق أوسع من البحث، مما يشير إلى كيفية مساهمتها في الجسم المعرفي القائم. بشكل عام، يوفر القسم التجريبي نظرة شاملة على التقنيات والتحليلات التي تدعم استنتاجات الدراسة.
مناقشة
يناقش البحث إعداد وتوصيف غشاء نانوي جديد من بولي أميد-أميد (PAI) وبولي إيثير أميد (PEI) على شكل نواة وقشرة، يُطلق عليه PAI@PEI، مصمم للاستخدام كفاصل في بطاريات الليثيوم المعدنية (LMBs). يتم تصنيع غشاء PAI@PEI من خلال تقنية النسيج الكهربائي، باستخدام نهج محوري لإنشاء هيكل يستجيب حرارياً يعزز السلامة من خلال توفير آلية إيقاف حراري. تُظهر قشرة PAI خصائص ذاكرة الشكل، مما يسمح للغشاء بإغلاق مساماته عند درجات حرارة مرتفعة (400 درجة مئوية) وإعادة فتحها عند درجات حرارة أقل (350 درجة مئوية)، مما يمنع نمو دندريت الليثيوم ويعزز تجانس نقل أيونات الليثيوم.
تؤكد تقنيات التوصيف، بما في ذلك المجهر الإلكتروني الماسح (SEM) وطيف الأشعة تحت الحمراء بتحويل فورييه (FTIR)، التكامل الناجح لـ PAI وPEI، بينما تكشف الاختبارات الميكانيكية عن تحسين في قوة الشد ومعامل المرونة. أداء PAI@PEI الكهربائي أفضل من أداء الفواصل التقليدية من البولي أوليفين، حيث تُظهر أرقام نقل أيونات الليثيوم أعلى (0.66 لـ PAI@PEI و0.71 لـ R-PAI@PEI) ومقاومة سطحية أقل، مما يساهم في تحسين استقرار الدورة وتقليل تكوين الدندريت. يدعم الاستقرار الحراري الممتاز للفاصل، مع فقدان وزن ضئيل عند درجات حرارة عالية، إمكانيته في تحسين سلامة البطارية خلال الظروف القصوى. بشكل عام، يُظهر غشاء PAI@PEI مزايا كبيرة من حيث السلامة والأداء الكهروكيميائي والاستقرار الحراري، مما يجعله مرشحاً واعداً لبطاريات الليثيوم المعدنية من الجيل التالي.
DOI: https://doi.org/10.1007/s40820-025-02050-2
PMID: https://pubmed.ncbi.nlm.nih.gov/41611891
Publication Date: 2026-01-30
Author(s): Pengpeng Li et al.
Primary Topic: Advanced Battery Materials and Technologies
Overview
The research presents a self-repairing polyetherimide (PEI)-functionalized polyamide-imide (PAI@PEI) nanofiber membrane designed to enhance the thermal safety of lithium metal batteries. The membrane’s polar amide and imide groups facilitate the dissociation and transport of lithium ions (Li⁺), which is crucial for suppressing dendrite growth. The PAI@PEI-based lithium symmetric cell demonstrates a remarkable Li⁺ transference number of 0.71 and maintains excellent cycling stability at a current density of 1 mA cm⁻² for over 750 hours.
The engineered core-shell structure of the PAI@PEI separator allows it to close its aperture at 400 °C and recover its structure at 350 °C, contributing to its high ionic conductivity of 1.63 mS cm⁻¹, a reduced nucleation overpotential of 54 mV, and an average coulombic efficiency of 82%. Density functional theory (DFT) calculations confirm that the PAI@PEI separator can effectively dissociate Li⁺ and PF₆⁻ ions from electrolytes, promoting adsorption near the affinity sites of PAI and PEI, which helps restrain lithium dendrite growth. Additionally, Li||NCM523 full cells retain 90.0% of their initial capacity after 100 cycles and achieve a discharge capacity of 99.7 mAh g⁻¹ at a 5C rate. This study provides significant insights for developing high-safety functional separators suitable for various energy-storage applications.
Introduction
The introduction highlights the urgent need for advancements in electrochemical energy storage technologies, particularly lithium metal batteries (LMBs), driven by global energy efficiency and sustainability demands. LMBs are recognized for their high theoretical specific capacity and low electrochemical potential; however, safety concerns, primarily due to internal heat generation and lithium dendrite formation, pose significant challenges. Current separators, such as polyethylene (PE) and polypropylene (PP), while cost-effective and stable, suffer from poor thermal stability, leading to risks of internal short circuits and thermal runaway.
To address these issues, the paper presents a novel smart separator design: a polyamideimide shell-encapsulated polyetherimide-core nanofiber separator (PAI@PEI). This separator features a thermal-gated function that allows for the closure of its apertures at temperatures exceeding 400 °C, significantly higher than conventional separators. Importantly, it can recover its apertures at 350 °C, thus offering a reversible thermal shutdown capability. The PAI and PEI components enhance lithium ion (Li⁺) dissociation and promote uniform Li⁺ transport, as supported by density functional theory (DFT) calculations. The resulting Li||Li cell with the PAI@PEI separator exhibits a high Li⁺ transference number of 0.71 and exceptional cycling stability, maintaining 90% capacity over 100 cycles at 1C, demonstrating the separator’s potential to improve the safety and performance of LMBs.
Methods
The experimental section of the research paper outlines the methodologies employed to investigate the research questions posed. It details the design of the experiments, including the selection of materials, sample preparation, and the specific procedures followed to ensure reproducibility and reliability of results. The section also describes the statistical analyses used to interpret the data, highlighting the significance of the findings.
Key findings from the experiments are presented, demonstrating the effectiveness of the methods employed. The results are contextualized within the broader scope of the research, indicating how they contribute to the existing body of knowledge. Overall, the experimental section provides a comprehensive overview of the techniques and analyses that underpin the study’s conclusions.
Discussion
The research discusses the preparation and characterization of a novel polyamide-imide (PAI) and polyetherimide (PEI) core-shell nanofiber membrane, termed PAI@PEI, designed for use as a separator in lithium metal batteries (LMBs). The PAI@PEI membrane is synthesized through electrospinning, utilizing a coaxial approach to create a thermally responsive structure that enhances safety by providing a thermal shutdown mechanism. The PAI shell exhibits shape memory properties, allowing the membrane to close its pores at elevated temperatures (400 °C) and reopen at lower temperatures (350 °C), thus preventing lithium dendrite growth and enhancing the uniformity of lithium ion transport.
Characterization techniques, including scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR), confirm the successful integration of PAI and PEI, while mechanical tests reveal improved tensile strength and elastic modulus. The electrochemical performance of the PAI@PEI separator is superior to that of conventional polyolefin separators, demonstrating higher lithium ion transference numbers (0.66 for PAI@PEI and 0.71 for R-PAI@PEI) and lower interfacial resistance, which contributes to enhanced cycling stability and reduced dendrite formation. The separator’s excellent thermal stability, with minimal weight loss at high temperatures, further supports its potential for improving battery safety during extreme conditions. Overall, the PAI@PEI membrane exhibits significant advantages in terms of safety, electrochemical performance, and thermal stability, making it a promising candidate for next-generation lithium metal batteries.
