فهم تشوه IRMOF-1 أثناء امتصاص ثاني أكسيد الكربون والأرجون من محاكاة مونت كارلو الديناميكية الجزيئية الهجينة Understanding the deformation of IRMOF-1 during carbon dioxide and argon adsorption from hybrid Monte Carlo/molecular dynamics simulations

شارك:
المجلة: Adsorption، المجلد: 32، العدد: 3
DOI: https://doi.org/10.1007/s10450-026-00679-y
تاريخ النشر: 2026-03-01
المؤلف: Lucas J. dos Santos وآخرون
الموضوع الرئيسي: الأطر العضوية المعدنية: التركيب والتطبيقات

نظرة عامة

تناقش هذه الفقرة ظاهرة التشوه الناتج عن الامتصاص في المواد المسامية، مع التركيز بشكل خاص على الهياكل العضوية المعدنية (MOFs) مثل IRMOF-1. بينما تفترض النماذج التقليدية غالبًا هيكل مسام صلب بسبب التغيرات الطفيفة في حجم المسام، تسلط هذه الدراسة الضوء على التأثير الكبير للتشوهات الهيكلية أثناء عمليات الامتصاص في المواد المرنة. يقدم المؤلفون طريقة هجينة فعالة تعتمد على Grand Canonical Monte Carlo (GCMC) والديناميكا الجزيئية NPT (NPT-MD)، تم تحسينها من خلال توازي GPU لبرامج gRASPA وGROMACS، لتحليل هذه التأثيرات أثناء امتصاص CO₂ وAr.

تظهر النتائج الرئيسية أن هيكل IRMOF-1 المفرغ يظهر تمددًا حراريًا سلبيًا، حيث ينكمش مع زيادة درجة الحرارة، وأن امتصاص CO₂ عند 195 كلفن يؤدي إلى منحنى تشوه غير أحادي. تؤدي التفاعلات الجذابة الأولية إلى الانكماش، حيث تصل إلى ذروتها عند ضغط ملء المسام المثالي، تليها التمدد بسبب التفاعلات الطاردة الناتجة عن تراكم الجزيئات. يظهر النموذج المرن سعة امتصاص CO₂ أقل مقارنة بالنموذج الصلب، ويعزى ذلك إلى تفاعلات صلبة-سائلة أضعف في الحالة المشوهة. بالإضافة إلى ذلك، تجد الدراسة أن امتصاص Ar عند 78 كلفن يؤدي إلى إجهاد أقل بسبب التفاعلات الأضعف، مما يؤدي إلى انكماش أقل وضغط ملء مسام أعلى، مع ملاحظة أيضًا انخفاض أكثر وضوحًا في كمية الامتصاص والحرارة مقارنة بالإطار الصلب.

مقدمة

في المقدمة، يناقش المؤلفون أهمية الهياكل العضوية المعدنية (MOFs) كفئة متعددة الاستخدامات من المواد المسامية، مع تسليط الضوء على مساميتها العالية ومساحة سطحها المحددة، مما يمكّن من مجموعة واسعة من التطبيقات بما في ذلك تخزين الغاز، والفصل، والتحفيز. تشير الورقة إلى تطوير مجموعة متنوعة من MOFs مع جزيئات رابط مختلفة وأنواع روابط، بالإضافة إلى ظهور بلورات مسامية ناعمة (SPCs)، التي تظهر مرونة ملحوظة وتغيرات هيكلية استجابةً للمؤثرات الخارجية مثل درجة الحرارة وامتصاص جزيئات الضيف.

يؤكد المؤلفون على أهمية فهم التشوه الناتج عن الامتصاص في SPCs، والتي يمكن نمذجتها باستخدام المحاكاة الجزيئية. يصفون طريقة Grand Canonical Monte Carlo (GCMC) كنهج شائع لمحاكاة ظواهر الامتصاص، بينما يشيرون أيضًا إلى ضرورة دمج المرونة في SPCs من خلال طريقة هجينة GCMC/NPT-MD. تجمع هذه الطريقة بين محاكاة GCMC والديناميكا الجزيئية لأخذ التغيرات في كل من أعداد جزيئات الضيف وحجم الإطار في الاعتبار. يقدم المؤلفون تنفيذهم الخاص لهذه الطريقة الهجينة باستخدام برامج gRASPA وGROMACS للتحقيق في التغيرات الهيكلية في IRMOF-1 بسبب امتصاص CO₂ وAr عند درجات حرارة محددة. ستفصل الأقسام اللاحقة من الورقة تنفيذ الطريقة والنتائج والاستنتاجات.

طرق

في هذا القسم، يوضح المؤلفون المنهجيات المستخدمة للتحقيق في المرونة الهيكلية وخصائص الامتصاص لـ IRMOF-1. تم الحصول على البيانات البلورية من Eddaoudi وآخرون وتم نمذجة المرونة الهيكلية باستخدام حقل قوة يدمج إمكانيات Lennard-Jones وCoulombic لمجموعات Zn4O، بينما تم تمثيل جزيئات الرابط باستخدام معلمات من حقول القوة DREIDING وCVFF. تم إنشاء ملفات الطوبولوجيا للمحاكاة باستخدام حزم mBuild وfoyer، وتم إجراء محاكاة NPT-MD عند درجات حرارة تتراوح بين 50 كلفن و650 كلفن تحت ضغط 1 بار، تتكون من 1 نانوثانية من التوازن تليها 2 نانوثانية من الإنتاج.

استخدمت الدراسة نهج GCMC/NPT-MD التكراري لحساب التشوهات الناتجة عن الامتصاص، بالتناوب بين محاكاة GCMC (التي أجريت باستخدام برنامج gRASPA) ومحاكاة NPT-MD (باستخدام GROMACS). تضمنت المنهجية استرخاء الهيكل المفرغ لمدة 1 نانوثانية، تليها محاكاة GCMC مع 1,000 دورة بدء و9,000 دورة إنتاج، وتكرار هذه الحلقة 100 مرة لأخذ التقلبات الكبيرة في أعداد الجزيئات أثناء انتقالات ملء المسام في الاعتبار. تم تحليل امتصاص CO₂ عند 195 كلفن وAr عند 78 كلفن بشكل خاص، باستخدام حقل القوة TraPPE لـ CO₂ ومعلمات Lennard-Jones لـ Ar. دمجت المحاكاة معادلات الحركة لنيوتن باستخدام خوارزمية leap-frog مع خطوة زمنية قدرها 1 فيمتوثانية، بينما تم التحكم في درجة الحرارة والضغط من خلال منظم حرارة V-rescale ومنظم ضغط C-rescale، على التوالي. تم إدارة التفاعلات بعيدة المدى باستخدام طرق Ewald للشبكة الجزيئية (PME)، مما يضمن نمذجة دقيقة لسلوك النظام أثناء أحداث الامتصاص.

نتائج

تشير النتائج إلى أن IRMOF-1 يظهر تمددًا حراريًا سلبيًا، حيث ينكمش عند التسخين حتى في غياب الجزيئات الممتصة. يُعزى هذا السلوك إلى التفاعل بين زيادة طول الروابط المحلية والحركة الحرارية لجزيئات الرابط، مما يؤدي إلى تقليل المسافة المتوسطة بين زوايا وحدة الخلية مع ارتفاع درجة الحرارة. تكشف المحاكاة أن أحجام وحدات الخلية الأكبر (مثل 2×2×2 و3×3×3) تؤدي إلى انكماش أقل مع زيادة درجة الحرارة، بينما يبقى الإطار مستقرًا تحت ظروف ضغط متغيرة.

تظهر التحليلات الإضافية لامتصاص CO₂ عند 195 كلفن أن النماذج المرنة تظهر سعات امتصاص أقل وسلوك إجهاد غير أحادي بسبب المنافسة بين التفاعلات الجذابة والطاردة بين الصلبة والسائلة. عند الضغوط المنخفضة، تهيمن التفاعلات الجذابة، مما يؤدي إلى الانكماش، بينما تؤدي الضغوط الأعلى إلى تفاعلات طاردة توسع المسام. هذا التشوه غير الأحادي هو سمة مميزة للمواد النانوية المسامية. بالمقابل، يظهر امتصاص Ar عند 78 كلفن إجهادًا أقل وسلوكًا أحاديًا، مع سعات امتصاص أقل تُعزى إلى تفاعلات Lennard-Jones الأضعف مقارنة بنظام CO₂. بشكل عام، تسلط النتائج الضوء على التفاعل المعقد بين التأثيرات الحرارية والضغط على الخصائص الهيكلية وخصائص الامتصاص لـ IRMOF-1.

نقاش

تقدم الدراسة طريقة هجينة مبتكرة تعتمد على Grand Canonical Monte Carlo (GCMC) والديناميكا الجزيئية NPT (MD)، مدمجة مع برامج gRASPA وGROMACS، لتسهيل تكرارات متعددة من محاكاة GCMC وNPT-MD بالتناوب. تم استخدام هذا النهج لتحليل التشوه الناتج عن الامتصاص في إطار IRMOF-1 المرن. تشير النتائج الرئيسية إلى أن هيكل IRMOF-1 المفرغ يظهر تمددًا حراريًا سلبيًا، حيث ينكمش مع زيادة درجة الحرارة، وهي ظاهرة أقل وضوحًا في صناديق المحاكاة الأكبر، بينما لا يؤثر نصف القطر المحدد بشكل كبير على النتائج.

تسلط الأبحاث الضوء على أن امتصاص CO₂ عند 195 كلفن يؤدي إلى منحنى تشوه غير أحادي. في البداية، تهيمن التفاعلات الجذابة بين الصلبة والسائلة، مما يؤدي إلى انكماش هيكلي، يصل إلى ذروته عند ضغط ملء المسام المثالي. مع حدوث تراكم الجزيئات، تسبب التفاعلات الطاردة في توسيع المسام، على الرغم من عدم العودة إلى حجمها الأصلي. من الجدير بالذكر أن النموذج المرن يظهر سعة امتصاص CO₂ أقل مقارنة بالنموذج الصلب بسبب ضعف التفاعلات الجذابة في الحالة المشوهة. علاوة على ذلك، يعزز نصف القطر الأكبر التفاعلات بعيدة المدى، مما يسهل التكثف الشعري عند الضغوط المنخفضة ويزيد من سعة الامتصاص. بالمقابل، يؤدي امتصاص Ar عند 78 كلفن إلى إجهاد أقل بكثير بسبب تفاعلات Lennard-Jones الأضعف، مما يؤدي إلى انكماش ضئيل وعدم كفاية الطرد لتوسيع المسام، على الرغم من أن انتقال ملء المسام يحدث عند ضغوط أعلى مع انخفاض في الامتصاص وحرارة الامتصاص مقارنة بالنموذج الصلب.

Journal: Adsorption, Volume: 32, Issue: 3
DOI: https://doi.org/10.1007/s10450-026-00679-y
Publication Date: 2026-03-01
Author(s): Lucas J. dos Santos et al.
Primary Topic: Metal-Organic Frameworks: Synthesis and Applications

Overview

The section discusses the phenomenon of adsorption-induced deformation in porous materials, particularly focusing on metal-organic frameworks (MOFs) like IRMOF-1. While traditional models often assume a rigid pore structure due to negligible pore volume changes, this study highlights the significant impact of structural deformations during adsorption processes in flexible materials. The authors introduce an efficient iterative hybrid Grand Canonical Monte Carlo (GCMC) and NPT molecular dynamics (NPT-MD) method, optimized through GPU parallelization of gRASPA and GROMACS software, to analyze these effects during the adsorption of CO₂ and Ar.

Key findings reveal that the evacuated IRMOF-1 structure exhibits negative thermal expansion, contracting with increasing temperature, and that the adsorption of CO₂ at 195 K leads to a non-monotonic deformation isotherm. Initial attractive interactions cause contraction, peaking at the ideal pore-filling pressure, followed by expansion due to repulsive interactions from molecule accumulation. The flexible model shows reduced CO₂ adsorption capacity compared to a rigid model, attributed to weaker solid-fluid interactions in the deformed state. Additionally, the study finds that Ar adsorption at 78 K results in smaller strain due to weaker interactions, leading to less contraction and a higher pore-filling pressure, while also noting a more pronounced reduction in adsorption amount and heat compared to the rigid framework.

Introduction

In the introduction, the authors discuss the significance of metal-organic frameworks (MOFs) as a versatile class of porous materials, highlighting their high porosity and specific surface area, which enable a wide range of applications including gas storage, separations, and catalysis. The paper notes the development of various MOFs with different linker molecules and bonding types, as well as the emergence of soft porous crystals (SPCs), which exhibit notable flexibility and structural changes in response to external stimuli such as temperature and guest molecule adsorption.

The authors emphasize the importance of understanding adsorption-induced deformation in SPCs, which can be modeled using molecular simulations. They describe the Grand Canonical Monte Carlo (GCMC) method as a common approach for simulating adsorption phenomena, while also noting the necessity of incorporating flexibility in SPCs through a hybrid GCMC/NPT-MD method. This method combines GCMC simulations with molecular dynamics to account for changes in both guest molecule numbers and framework volume. The authors present their own implementation of this hybrid method using gRASPA and GROMACS software to investigate structural changes in IRMOF-1 due to CO₂ and Ar adsorption at specific temperatures. Subsequent sections of the paper will detail the method’s implementation, results, and conclusions.

Methods

In this section, the authors detail the methodologies employed to investigate the structural flexibility and adsorption properties of IRMOF-1. The crystallographic data was sourced from Eddaoudi et al. and the structural flexibility was modeled using a force field that incorporates Lennard-Jones and Coulombic potentials for the Zn4O clusters, while linker molecules were represented using parameters from the DREIDING and CVFF force fields. Topology files for simulations were generated with the mBuild and foyer packages, and NPT-MD simulations were conducted at temperatures between 50 K and 650 K under 1 bar pressure, consisting of 1 ns equilibration followed by 2 ns of production.

The study utilized an iterative GCMC/NPT-MD approach to calculate adsorption-induced deformations, alternating between GCMC simulations (conducted with gRASPA software) and NPT-MD simulations (using GROMACS). The methodology involved relaxing the evacuated structure for 1 ns, followed by GCMC simulations with 1,000 initialization and 9,000 production cycles, and repeating this loop 100 times to account for significant fluctuations in particle numbers during pore-filling transitions. The adsorption of CO2 at 195 K and Ar at 78 K was specifically analyzed, employing the TraPPE force field for CO2 and Lennard-Jones parameters for Ar. The simulations integrated Newton’s equations of motion using the leap-frog algorithm with a 1 fs time step, while temperature and pressure were controlled through the V-rescale thermostat and C-rescale barostat, respectively. Long-range interactions were managed using Particle-mesh Ewald (PME) methods, ensuring accurate modeling of the system’s behavior during adsorption events.

Results

The results indicate that IRMOF-1 demonstrates negative thermal expansion, contracting upon heating even in the absence of adsorbed molecules. This behavior is attributed to the interplay between local bond length increases and the thermal motion of linker molecules, which leads to a reduced average distance between unit cell corners as temperature rises. Simulations reveal that larger unit cell sizes (e.g., 2×2×2 and 3×3×3) result in less contraction with increasing temperature, while the framework remains stable under varying pressure conditions.

Further analysis of CO₂ adsorption at 195 K shows that flexible models exhibit lower adsorption capacities and non-monotonic strain behavior due to the competition between attractive and repulsive solid-fluid interactions. At low pressures, attractive interactions dominate, causing contraction, while higher pressures lead to repulsive interactions that expand the pore. This non-monotonic deformation is characteristic of nanoporous materials. In contrast, Ar adsorption at 78 K demonstrates a smaller strain and a monotonic behavior, with lower adsorption capacities attributed to weaker Lennard-Jones interactions compared to the CO₂ system. Overall, the findings highlight the complex interplay of thermal and pressure effects on the structural and adsorption properties of IRMOF-1.

Discussion

The study introduces an innovative hybrid Grand Canonical Monte Carlo (GCMC) and NPT-Molecular Dynamics (MD) method, integrating gRASPA and GROMACS software, to facilitate multiple iterations of alternating GCMC and NPT-MD simulations. This approach was employed to analyze the adsorption-induced deformation of the flexible IRMOF-1 framework. Key findings indicate that the evacuated IRMOF-1 structure exhibits negative thermal expansion, contracting with increasing temperature, a phenomenon that is less pronounced in larger simulation boxes, while the cutoff radius does not significantly affect the results.

The research highlights that CO₂ adsorption at 195 K leads to a non-monotonic deformation isotherm. Initially, attractive solid-fluid interactions dominate, resulting in structural contraction, which reaches a maximum at the ideal pore-filling pressure. As molecular accumulation occurs, repulsive interactions cause the pore to expand, albeit not returning to its original volume. Notably, the flexible model shows reduced CO₂ adsorption capacity compared to the rigid model due to weakened attractive interactions in the deformed state. Furthermore, a larger cutoff radius enhances long-range interactions, facilitating capillary condensation at lower pressures and increasing adsorption capacity. In contrast, Ar adsorption at 78 K induces significantly less strain due to weaker Lennard-Jones interactions, leading to minimal contraction and insufficient repulsion for pore expansion, although the pore-filling transition occurs at higher pressures with reduced adsorption and heat of adsorption compared to the rigid model.