DOI: https://doi.org/10.1038/s41467-025-56358-z
PMID: https://pubmed.ncbi.nlm.nih.gov/39863606
تاريخ النشر: 2025-01-25
المؤلف: Changdao Han وآخرون
الموضوع الرئيسي: تقنيات فصل الأغشية
طرق
في هذه الدراسة، تم تخليق أكسيد الجرافين (GO) من مسحوق الجرافيت الطبيعي باستخدام طريقة هومرز المعدلة. تم تقليل حجم رقائق GO الناتجة بشكل أكبر من خلال طريقة هيدروحرارية أمينية، تلتها عملية توصيف باستخدام المجهر الإلكتروني الماسح (SEM)، وطيفية الأشعة السينية للالكترونات (XPS)، والمجهر الذري (AFM)، ومحلل حجم الجسيمات والجهد الزتاوي.
تم تصنيع أغشية نانوية عمودية من خلال الترشيح بالفراغ لتعليق أكسيد الجرافين المخفض المزخرف بالأمينات (AD-rGO) على ركيزة من استر السليلوز المختلط بحجم مسام كبير. بعد ذلك، تم إدخال محاليل الملح لمزيد من الترشيح بالفراغ. تم تقييم نفاذية الماء، وتم قياس تركيزات الأيونات الأولية والمفلترة لمحاليل الملح باستخدام طيف الانبعاث الضوئي البلازمي المقترن بالحث (ICP-OES)، مما يوفر رؤى حول كفاءة الترشيح للغشاء.
نتائج
في هذه الدراسة، تم استخدام غشاء MCE مصنوع خصيصًا مع مسام غير متماثلة كركيزة لتصنيع أغشية AD-rGO. كان لغشاء MCE حجم مسام صغير يبلغ 0.2 ميكرومتر من جانب واحد وحجم مسام أكبر يبلغ حوالي 2 ميكرومتر من الجانب الآخر. تم تحميل رقائق AD-rGO، المعدة من تعليق GO، على كلا الجانبين من الغشاء باستخدام الترشيح بالفراغ. أدى الجانب ذو المسام الصغيرة إلى غشاء طبقي مستمر وخالي من العيوب، بينما أظهر الجانب ذو المسام الكبيرة ترتيبًا نادرًا من رقائق AD-rGO، دون ملاحظة تسرب إلى الجانب ذو المسام الصغيرة.
أظهرت النتائج أن أغشية AD-rGO حققت نفاذية مائية نقية مثيرة للإعجاب تبلغ 4169 لتر م⁻² ساعة⁻¹ بار⁻¹، متفوقة بشكل كبير على الأغشية الطبقية التقليدية (93 لتر م⁻² ساعة⁻¹ بار⁻¹). عند ترشيح محاليل ملح مختلفة (Pb(NO₃)₂، CuSO₄، ZnSO₄، CrCl₃، وFeCl₃) عند ضغط 1 بار، حافظت الأغشية على نفاذية مائية عالية تتراوح بين 1106 إلى 2647 لتر م⁻² ساعة⁻¹ بار⁻¹، مع معدلات رفض تتجاوز 99.9% لجميع الأملاح المختبرة. تم عزو التباينات الملحوظة في النفاذية إلى التفاعلات القوية بين الكاتيونات المائية وπ، خاصة مع الأيونات الثلاثية، والتي أثرت على المسافة بين الطبقات وبالتالي كفاءة الترشيح. بشكل عام، أظهرت أغشية AD-rGO أداءً متفوقًا مقارنةً بأغشية الترشيح النانوية الموجودة، محققة كل من نفاذية مائية عالية ورفض أيوني فائق.
مناقشة
في هذه المناقشة، يبرز المؤلفون النفاذية المائية الاستثنائية لغشاء AD-rGO، المنسوبة إلى قنوات الماء العمودية التي تتشكل من خلال تكديس رقائق AD-rGO داخل قالب الركيزة. تتناسب الرقائق، التي يبلغ متوسط حجمها الجانبي حوالي 450 نانومتر، مع المسام الأكبر (حوالي 2 ميكرومتر) للركيزة بينما تمنع التسرب من المسام الأصغر (حوالي 0.2 ميكرومتر). هذه التكوينات تقصر بشكل كبير من مسار الماء وتزيد من كثافة قنوات الماء، مما يعزز النفاذية العامة. يظهر غشاء AD-rGO نفاذية مائية تبلغ 2535 لتر م$^{-2}$ ساعة$^{-1}$ بار$^{-1}$ مع معدل رفض يبلغ 99.9% لمحلولات CuSO$_4$، مما يدل على أداء قوي في فرز الأيونات حتى تحت تركيزات الملح المتغيرة.
كما يناقش المؤلفون استقرار وقوة غشاء AD-rGO، الذي يمكنه تحمل ضغوط عالية والحفاظ على الأداء على مدى دورات الترشيح الممتدة. يساهم المحتوى المنخفض من المجموعات المحتوية على الأكسجين ووجود مجموعات C-N في تقليل مقاومة النقل وزيادة التفاعلات بين الكاتيونات وπ، مما يحسن قدراته في الترشيح. تكشف محاكاة الديناميات الجزيئية أن حاجز الطاقة للأيونات متعددة التكافؤ مثل Cu$^{2+}$ أعلى بكثير من ذلك بالنسبة لجزيئات الماء، مما يوضح الآلية وراء رفض الأيونات الانتقائي. بشكل عام، تشير النتائج إلى أن الخصائص الهيكلية والكيميائية الفريدة لغشاء AD-rGO توفر طريقًا واعدًا للتقدم في تقنيات الترشيح النانوية.
DOI: https://doi.org/10.1038/s41467-025-56358-z
PMID: https://pubmed.ncbi.nlm.nih.gov/39863606
Publication Date: 2025-01-25
Author(s): Changdao Han et al.
Primary Topic: Membrane Separation Technologies
Methods
In this study, Graphene Oxide (GO) was synthesized from natural graphite powder utilizing the modified Hummers method. The resulting GO flakes were further reduced in size through an amino-hydrothermal method, followed by characterization using Scanning Electron Microscopy (SEM), X-ray Photoelectron Spectroscopy (XPS), Atomic Force Microscopy (AFM), and a nanoparticle size and zeta potential analyzer.
Vertical nanochannel membranes were fabricated by vacuum filtration of an amino-decorated reduced graphene oxide (AD-rGO) suspension onto a large pore size mixed cellulose ester (MCE) substrate. Subsequently, salt solutions were introduced for further vacuum filtration. Water permeability was assessed, and the initial and filtered ion concentrations of the salt solutions were measured using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), providing insights into the membrane’s filtration efficiency.
Results
In this study, a custom-made MCE membrane with asymmetric pores was utilized as a substrate for the fabrication of AD-rGO membranes. The MCE membrane featured a small pore size of 0.2 μm on one side and a larger pore size of approximately 2 μm on the other. The AD-rGO flakes, prepared from a GO suspension, were loaded onto both sides of the membrane using vacuum filtration. The small pore side resulted in a continuous, defect-free layered membrane, while the large pore side exhibited a sparse arrangement of AD-rGO flakes, with no leakage observed to the small pore side.
The results demonstrated that the AD-rGO membranes achieved an impressive pure water permeance of 4169 L m⁻² h⁻¹ bar⁻¹, significantly outperforming typical layered membranes (93 L m⁻² h⁻¹ bar⁻¹). When filtering various salt solutions (Pb(NO₃)₂, CuSO₄, ZnSO₄, CrCl₃, and FeCl₃) at a pressure of 1 bar, the membranes maintained high water permeances ranging from 1106 to 2647 L m⁻² h⁻¹ bar⁻¹, with rejection rates exceeding 99.9% for all tested salts. The observed variations in permeance were attributed to the strong hydrated cation-π interactions, particularly with trivalent ions, which influenced the interlayer spacing and thus the filtration efficiency. Overall, the AD-rGO membranes demonstrated superior performance compared to existing nanofiltration membranes, achieving both high water permeance and ultrahigh ion rejection.
Discussion
In this discussion, the authors highlight the exceptional water permeance of the AD-rGO membrane, attributed to the vertical water channels formed by stacking AD-rGO flakes within a substrate template. The flakes, with an average lateral size of approximately 450 nm, fit into the larger pores (approximately 2 μm) of the substrate while preventing leakage from the smaller pores (approximately 0.2 μm). This configuration significantly shortens the water pathway and increases the density of water channels, enhancing overall permeance. The AD-rGO membrane exhibits a water permeance of 2535 L m$^{-2}$ h$^{-1}$ bar$^{-1}$ with a rejection rate of 99.9% for CuSO$_4$ solutions, demonstrating robust ion sieving performance even under varying salt concentrations.
The authors also discuss the stability and mechanical strength of the AD-rGO membrane, which can withstand high pressures and maintain performance over extended filtration cycles. The membrane’s low content of oxygen-containing groups and the presence of C-N groups contribute to reduced transport resistance and enhanced cation-π interactions, further improving its filtration capabilities. Molecular dynamics simulations reveal that the energy barrier for multivalent ions like Cu$^{2+}$ is significantly higher than that for water molecules, elucidating the mechanism behind the selective ion rejection. Overall, the findings suggest that the AD-rGO membrane’s unique structural and chemical properties provide a promising avenue for advancements in nanofiltration technologies.
