قياسات الشكل الهندسي لنهاية عظم العضد البشري الجاف العليا والسفلى Morphometric Measurements of Upper and Lower End of Dry Human Humerus

شارك:
المجلة: Journal of Brahmanbaria Medical College، المجلد: 7، العدد: 1
DOI: https://doi.org/10.3329/jbrmc.v7i1.87505
تاريخ النشر: 2026-02-05
المؤلف: Md Asraful Alam Siddique وآخرون
الموضوع الرئيسي: دراسات الأنثروبولوجيا الجنائية والبيوآركيولوجيا

نظرة عامة

تدرس هذه الدراسة الخصائص المورفومترية لعظم العضد، مع التركيز على أهميتها في العلوم الجنائية، وعلم التشريح، وعلم الآثار. أجريت الدراسة في كلية الطب سيلهيت MAG عثماني من يناير إلى ديسمبر 2021، وشملت 200 عظم عضد صحي بالغ. تضمنت القياسات الرئيسية القطر العمودي للرأس (VDH)، والقطر العرضي للرأس (TDH)، والقطر العرضي الأقصى (MTD)، وعرض الإيبيكوندي (EB)، وعرض الكونديل (CB)، وعرض الرأس (BC). تم إجراء التحليل الإحصائي باستخدام النسخة 23 من SPSS، مع تقديم النتائج كمتوسط ± الانحراف المعياري.

كشفت النتائج عن متوسط VDH قدره 42.28 ± 3.43 مم، وMTD قدره 39.84 ± 3.45 مم، وTDH قدره 39.42 ± 6.29 مم. في الطرف الأدنى، كان متوسط EB 56.09 ± 6.24 مم، وكان متوسط CB 40.42 ± 3.35 مم. تستنتج الدراسة أن هذه القياسات المورفومترية ضرورية لعلماء التشريح، والمتخصصين في العلوم الجنائية، وعلماء الآثار في تحديد بقايا الهياكل العظمية والمساعدة في الإجراءات الجراحية المتعلقة بعظم العضد. علاوة على ذلك، تسلط الدراسة الضوء على أهمية فهم الاختلافات التشريحية عبر السكان، وال sexes، ومجموعات العمر، مما يساهم بشكل كبير في التعرف الجنائي والدراسات الأنثروبولوجية.

طرق البحث

استخدمت الدراسة تصميمًا وصفيًا أجري على مدار عام واحد، من يناير إلى ديسمبر 2021، باستخدام عينة من 200 عظم عضد بشري جاف ومتحجر بالكامل تم الحصول عليها من قسم التشريح في كلية الطب سيلهيت MAG عثماني. تم منح الموافقة الأخلاقية من قبل اللجنة الأخلاقية للكلية، وتم تطبيق معايير صارمة للإدراج والاستبعاد لضمان سلامة العينة؛ على وجه التحديد، تم استبعاد العظام التي كانت مكسورة، مشوهة، أو تظهر تشوهات خلقية. تم جمع البيانات باستخدام تقنية أخذ العينات الهادفة، مع تسجيل القياسات على ورقة بيانات.

لتحليل القياسات الأنثروبومترية لعظام العضد، تم أخذ قياسات مختلفة باستخدام لوحة قياس العظام، ومقياس انزلاقي رقمي، وشريط قياس مرن. ركزت الدراسة على عدة متغيرات رئيسية: القطر العمودي للرأس (VDH)، والقطر العرضي للرأس (TDH)، والقطر العرضي الأقصى للرأس (MTD)، وعرض الإيبيكوندي (EB)، وعرض الكونديل (CB). تم تحديد VDH كالمسافة المستقيمة بين أعلى وأدنى النقاط على الأسطح المفصلية، وTDH كالمسافة الخطية بين النقاط الأكثر أمامية وخلفية، وMTD كالمسافة بين النقاط الأكثر جانبية، وEB كالمسافة العرضية بين الإيبيكوندي، وCB كالمسافة بين نقاط المنتصف للطرخية والرأس. تم إجراء تحليل البيانات باستخدام النسخة 23 من SPSS، مع التعبير عن النتائج كمتوسط ± الانحراف المعياري (SD).

النتائج

في هذه الدراسة، تم تحليل ما مجموعه 200 عظم عضد لتحديد قياسات تشريحية مختلفة. وُجد أن متوسط القطر العمودي لرأس العضد هو \(42.28 \pm 3.43\) مم. بالإضافة إلى ذلك، تم قياس القطر الأقصى لرأس العضد بمقدار \(39.84 \pm 3.45\) مم، بينما كان القطر العرضي \(39.42 \pm 6.29\) مم.

تضمنت القياسات الإضافية متوسط عرض الإيبيكوندي، الذي كان \(56.09 \pm 6.24\) مم، وعرض الكونديل، الذي تم تسجيله عند \(40.42 \pm 3.35\) مم. تم تلخيص هذه النتائج في الجدولين I و II، اللذان يقدمان قياسات أجزاء مختلفة من عظم العضد، مشيرين إلى المتوسط والانحراف المعياري لكل معلمة.

المناقشة

تسلط المناقشة الضوء على التباين في أحجام عظام الأطراف العلوية عبر مختلف السكان، مع التأكيد على الخصائص المورفومترية لعظم العضد كعوامل حاسمة في مجالات مثل العلوم الجنائية، وعلم التشريح، وعلم الآثار. تقدم الدراسة قيمًا متوسطة لأبعاد مختلفة من رأس العضد، بما في ذلك قطر عمودي أقصى قدره 42.28 ± 3.43 مم، والذي يتماشى مع النتائج من السكان في تركيا، والهند، ونيبال. تشمل القياسات الإضافية قطرًا أقصى قدره 39.84 ± 3.45 مم وقطر عرضي قدره 39.42 ± 6.29 مم، مما يعزز اتساق هذه الخصائص المورفومترية عبر دراسات متنوعة.

علاوة على ذلك، تورد الدراسة عرض الإيبيكوندي وعرض الكونديل، مع قيم متوسطة قدرها 56.09 ± 6.24 مم و40.42 ± 3.35 مم، على التوالي. تشير النتائج إلى وجود اختلافات ذات دلالة إحصائية بين المجموعات (p < 0.05)، مما يبرز أهمية هذه القياسات في فهم الاختلافات التشريحية المتعلقة بالجنس والسكان. بشكل عام، تساهم النتائج في تقديم رؤى قيمة للتعرف الجنائي والبحث الأنثروبولوجي، مما يبرز أهمية قياسات عظم العضد في السياقات الأكاديمية والسريرية.

Journal: Journal of Brahmanbaria Medical College, Volume: 7, Issue: 1
DOI: https://doi.org/10.3329/jbrmc.v7i1.87505
Publication Date: 2026-02-05
Author(s): Md Asraful Alam Siddique et al.
Primary Topic: Forensic Anthropology and Bioarchaeology Studies

Overview

The study investigates the morphometric characteristics of the humerus, emphasizing their significance in forensic science, anatomy, and archaeology. Conducted at Sylhet MAG Osmani Medical College from January to December 2021, the research involved 200 healthy adult right humeri. Key measurements included the Vertical Diameter of the Head (VDH), Transverse Diameter of the Head (TDH), Maximum Transverse Diameter (MTD), Epicondylar Breadth (EB), Condylar Breadth (CB), and Breadth of the Capitulum (BC). Statistical analysis was performed using SPSS version 23, with results presented as mean ± SD.

The findings revealed a mean VDH of 42.28 ± 3.43 mm, MTD of 39.84 ± 3.45 mm, and TDH of 39.42 ± 6.29 mm. At the lower end, the mean EB was 56.09 ± 6.24 mm, and the mean CB was 40.42 ± 3.35 mm. The study concludes that these morphometric measurements are essential for anatomists, forensic specialists, and archaeologists in identifying skeletal remains and aiding surgical procedures involving the humerus. Furthermore, the research highlights the importance of understanding anatomical variations across populations, sexes, and age groups, contributing significantly to forensic identification and anthropological studies.

Methods

The study employed a descriptive design conducted over one year, from January to December 2021, utilizing a sample of 200 dry, fully ossified human right humeri obtained from the Department of Anatomy at Sylhet MAG Osmani Medical College. Ethical approval was granted by the college’s Ethical Committee, and strict inclusion and exclusion criteria were applied to ensure the integrity of the sample; specifically, humeri that were fractured, deformed, or exhibited congenital abnormalities were excluded. Data collection was performed using a purposive sampling technique, with measurements recorded on a data sheet.

For the anthropometric analysis of the humeri, various measurements were taken using an osteometric board, digital slide caliper, and flexible ribbon tape. The study focused on several key variables: the Vertical Diameter of the Head (VDH), Transverse Diameter of the Head (TDH), Maximum Transverse Diameter of the Head (MTD), Epicondylar Breadth (EB), and Condylar Breadth (CB). VDH was determined as the straight distance between the highest and lowest points on the articular surfaces, TDH as the linear distance between the most anterior and posterior points, MTD as the distance between the most lateral points, EB as the transverse distance between the epicondyles, and CB as the distance between the midpoints of the trochlea and capitulum. Data analysis was conducted using SPSS version 23, with results expressed as mean ± standard deviation (SD).

Results

In this study, a total of 200 humeri were analyzed to determine various anatomical measurements. The mean vertical diameter of the humeral head was found to be \(42.28 \pm 3.43\) mm. Additionally, the maximum diameter of the humeral head measured \(39.84 \pm 3.45\) mm, while the transverse diameter was \(39.42 \pm 6.29\) mm.

Further measurements included the mean epicondylar breadth, which was \(56.09 \pm 6.24\) mm, and the condylar breadth, recorded at \(40.42 \pm 3.35\) mm. These findings are summarized in Tables I and II, which present the measurements of different segments of the humerus, indicating the mean and standard deviation for each parameter.

Discussion

The discussion highlights the variability in upper limb bone sizes across different populations, emphasizing the humerus’s morphometric characteristics as critical in fields such as forensics, anatomy, and archaeology. The study presents mean values for various dimensions of the humeral head, including a maximum vertical diameter of 42.28 ± 3.43 mm, which aligns with findings from populations in Turkey, India, and Nepal. Additional measurements include a maximum diameter of 39.84 ± 3.45 mm and a transverse diameter of 39.42 ± 6.29 mm, reinforcing the consistency of these morphometric traits across diverse studies.

Furthermore, the study reports on the epicondylar breadth and condylar breadth, with mean values of 56.09 ± 6.24 mm and 40.42 ± 3.35 mm, respectively. The results indicate statistically significant differences between groups (p < 0.05), underscoring the importance of these measurements in understanding anatomical variations related to sex and population. Overall, the findings contribute valuable insights for forensic identification and anthropological research, highlighting the relevance of humeral morphometrics in both academic and clinical contexts.