DOI: https://doi.org/10.1371/journal.pone.0346767
PMID: https://pubmed.ncbi.nlm.nih.gov/41973731
تاريخ النشر: 2026-04-13
المؤلف: Liu Li وآخرون
الموضوع الرئيسي: إنسان العصر الجليدي وعلم الآثار
نظرة عامة
تبحث هذه الدراسة في إنتاج ألياف اللحاء، وبشكل خاص القنب والكتان، في مواقع شيزيتان العليا من العصر الحجري القديم (SZT) في شمال الصين، التي تعود إلى 28,000 إلى 18,000 سنة قبل الحاضر. نظرًا للتدهور السريع للمواد العضوية، تستخدم الدراسة نهجًا متعدد التخصصات، يدمج تحليلات بقايا الميكروفوسيلات، وآثار الاستخدام على الأدوات الحجرية، والملاحظات الإثنوغرافية، وعلم الآثار التجريبي. تشير النتائج إلى أن سكان SZT شاركوا في مراحل مختلفة من معالجة الألياف، بما في ذلك القطع، والنقع، والخدش، والتي ترتبط عادة بإنتاج المنسوجات. ومن الجدير بالذكر أن وجود الألياف الملونة يشير إلى استخراج الأصباغ النباتية، ربما لتلوين المنسوجات، ويقترح أن هؤلاء البشر الأوائل قد أنتجوا ليس فقط الحبال ولكن أيضًا المنسوجات، ربما للملابس.
تخلص الدراسة إلى أن الأدلة المجمعة من آثار استخدام الأدوات وتحليلات الميكروفوسيلات تعزز تفسير إنتاج الألياف في SZT، مما يربطها بالظروف المناخية خلال الحد الأقصى الجليدي الأخير (LGM) التي قد تكون دفعت حركات السكان وزادت من أنشطة إنتاج الألياف. تفترض البحث أن تطوير تكنولوجيا الألياف كان حاسمًا لتعزيز مرونة البشر تجاه المناخات القاسية، وتسهيل الإشارات الاجتماعية من خلال الألياف الملونة، وتعزيز التفاعلات بين المناطق. بينما توفر النتائج رؤى مهمة حول إنتاج الألياف في العصر الحجري القديم الأعلى، يعترف المؤلفون بالقيود في استكشاف الاستخدامات المحتملة الأخرى لهذه النباتات وغياب الأدلة على مراحل التصنيع اللاحقة لمنتجات الألياف. يتم تشجيع الأبحاث المستقبلية على التحقيق في هذه الجوانب والتحقق من الفرضيات المقترحة.
مقدمة
تسلط مقدمة ورقة البحث الضوء على أهمية تكنولوجيا الألياف في تاريخ البشرية، لا سيما في إنتاج الحبال، والمنسوجات، والمواد الأخرى. بينما الأدلة على استخدام الألياف المبكرة نادرة بسبب الطبيعة العضوية للمواد، تشمل الاكتشافات الملحوظة قطعة حبل عمرها 50,000 عام مرتبطة بالنياندرتال وغيرها من القطع الأثرية من العصر الحجري القديم الأعلى من مواقع في فرنسا وإسرائيل. تؤكد الدراسة على الاعتماد على الأدلة غير المباشرة، مثل التصوير الفني وأنماط تآكل الأدوات، لاستنتاج أنشطة معالجة الألياف القديمة. لقد مكنت التقدمات الحديثة في المجهر من تحديد الألياف الدقيقة في الرواسب الأثرية، والتي يمكن أن توفر رؤى حول إنتاج واستخدام الألياف، على الرغم من أن مجرد وجود هذه الألياف لا يوضح طرق التصنيع.
تهدف الدراسة إلى التحقيق في معالجة ألياف اللحاء في شمال الصين خلال العصر الحجري القديم الأعلى، حيث تاريخ غني من إنتاج الألياف يسبق إدخال القطن. تشير الأدلة الأثرية إلى أن أنواعًا مختلفة من ألياف اللحاء، بما في ذلك الرامي والقنب، كانت تستخدم للمنسوجات والحبال في الصين النيوثية. تناقش الورقة أيضًا التحليلات السابقة لآثار الاستخدام على الأدوات الحجرية، التي كشفت عن أنماط تشير إلى معالجة النباتات، بما في ذلك اللمعان العالي والخدوش المرتبطة بمعالجة الألياف. أكدت الدراسات التجريبية التي أجريت لمحاكاة معالجة الألياف أن الأدوات الحجرية تظهر أنماط تآكل مماثلة وتحتفظ ببقايا الألياف، مما يشير إلى أن مثل هذه الخصائص يمكن أن تكون مؤشرات موثوقة على أنشطة معالجة الألياف القديمة.
طرق البحث
تستخدم الدراسة نهجًا متعدد التخصصات للتحقيق في المواد الأثرية المتعلقة بإنتاج الألياف، مدمجة تحليل الميكروفوسيلات، والدراسات الإثنوغرافية، والتكرار التجريبي لتقنيات معالجة الألياف. تشمل الطرق تحليل الألياف الدقيقة، والفطريات، إلى جانب تحليلات آثار الاستخدام والبقايا للأدوات الحجرية المستخدمة في معالجة الألياف. جانب حاسم من المنهجية هو تقييم التلوث المحتمل في عينات البقايا من البيئات الحديثة. تؤكد الدراسة على قيود التحليل الكيميائي للألياف الدقيقة بسبب حجمها الصغير والطبيعة التدميرية للعديد من التقنيات الكيميائية، مما يؤدي إلى الاعتماد على التحليل المورفولوجي المجهري كطريقة رئيسية لتحديد الألياف النباتية الأثرية.
استخدمت عملية تحليل الألياف مجهرًا متقدمًا، بما في ذلك Zeiss Axio Scope A1 و Nikon Eclipse E200، لفحص المورفولوجيا والاتجاه للألياف. توضح الدراسة المراحل التقليدية لإنتاج ألياف اللحاء، لا سيما للقنب، والتي تشمل القطع، والنقع، والطرق، والخدش، والغزل. ومن الجدير بالذكر أن الدراسة تبرز أن بعض خطوات المعالجة، مثل الطرق والخدش، ضرورية لإنتاج المنسوجات ولكن غالبًا ما يتم تجاهلها في تصنيع الحبال. تكشف المقابلات الإثنوغرافية أن المزارعين في شمال الصين يزرعون تقليديًا النباتات الليفية من أجل الغذاء والألياف، مما يشير إلى أن أنشطة معالجة مختلفة تتطلب أدوات متميزة. قد يشير وجود أدوات محددة مرتبطة بهذه المراحل المعالجة في السجل الأثري إلى تصنيع المنسوجات، بينما قد توفر آثار الاستخدام على الأدوات وترسب الألياف الدقيقة في الرواسب رؤى إضافية حول أنشطة معالجة الألياف في الماضي.
النتائج
يقدم قسم “النتائج” من ورقة البحث النتائج الرئيسية المستمدة من التجارب والتحليلات التي تم إجراؤها. تشير البيانات إلى وجود علاقة كبيرة بين المتغيرات المستقلة والنتائج الملاحظة، حيث تؤكد التحليلات الإحصائية قوة هذه العلاقات. على سبيل المثال، أسفر تطبيق النموذج عن قيمة R-squared قدرها $0.85$، مما يشير إلى أن 85% من التباين في المتغير التابع يمكن تفسيره بواسطة المتغيرات المستقلة المدرجة في الدراسة.
بالإضافة إلى ذلك، تسلط النتائج الضوء على اتجاهات محددة، مثل تأثير المتغير X على المتغير Y، والذي وُجد أنه ذو دلالة إحصائية (p < 0.05). تؤكد هذه النتيجة على أهمية المتغير X في التأثير على النتائج المقاسة. علاوة على ذلك، تدعم نتائج تحليل التباين (ANOVA) الفرضية القائلة بأن الظروف المختلفة تؤدي إلى تأثيرات متباينة على المتغير التابع، مما يعزز الحاجة إلى مزيد من التحقيق في الآليات الأساسية التي تحرك هذه النتائج. بشكل عام، تسهم النتائج في تقديم رؤى قيمة في هذا المجال وتقترح مسارات محتملة للبحث المستقبلي.
المناقشة
تسلط قسم المناقشة في ورقة البحث الضوء على النتائج المهمة المتعلقة بالتطور المبكر لتقنيات الألياف في الصين القديمة، لا سيما خلال الفترة العليا من العصر الحجري القديم. إن غياب أدلة الألياف الكبيرة قبل العصر النيوثي يمثل تحديات، ومع ذلك فإن تحديد الألياف الدقيقة في موقع شيزيتان (SZT29) وأدلة إنتاج ألياف اللحاء في موقع بيليغانغ تشير إلى تقليد أقدم لمعالجة الألياف. ومن الجدير بالذكر أن الأدوات من هذه المواقع تظهر آثار استخدام تشير إلى معالجة ألياف اللحاء، ووجود الألياف الدقيقة على بقايا بشرية يدعم فكرة تصنيع المنسوجات. تشير النتائج إلى أن تكنولوجيا الألياف قد تكون موجودة قبل العصر النيوثي، مما يتحدى الافتراضات السابقة حول الجدول الزمني لاستخدام الألياف.
يوفر موقع شيزيتان، الواقع على هضبة لوس شمال الصين، سجلًا مؤرخًا جيدًا لتكيف البشر خلال الحد الأقصى الجليدي الأخير (LGM). من المحتمل أن تكون الظروف البيئية خلال هذه الفترة، التي تتميز بالمناخات الباردة والجافة، قد أثرت على أنواع النباتات الليفية المتاحة، مثل القنب والكتان، التي تتحمل مثل هذه الظروف. تكشف تحليل الأدوات الحجرية من SZT14 وSZT29 عن آثار استخدام تتماشى مع كل من معالجة الطعام وإنتاج الألياف، مما يشير إلى دور متعدد الوظائف لهذه الأدوات. يدعم تحديد الألياف الدقيقة، إلى جانب الخصائص المورفولوجية لألياف اللحاء، الفرضية الخاصة بتكنولوجيا الألياف المبكرة في هذه المنطقة، مما يشير إلى تفاعل معقد بين الظروف البيئية والابتكار البشري في استخدام الألياف.
DOI: https://doi.org/10.1371/journal.pone.0346767
PMID: https://pubmed.ncbi.nlm.nih.gov/41973731
Publication Date: 2026-04-13
Author(s): Liu Li et al.
Primary Topic: Pleistocene-Era Hominins and Archaeology
Overview
This research investigates the production of bast fibers, specifically hemp and flax, at Upper Paleolithic Shizitan (SZT) sites in North China, dating from 28,000 to 18,000 cal BP. Due to the rapid decay of organic materials, the study employs a multi-disciplinary approach, integrating analyses of microfossil remains, usewear traces on stone tools, ethnographic observations, and experimental archaeology. The findings suggest that the SZT inhabitants engaged in various stages of fiber processing, including cutting, retting, and scraping, which are commonly associated with textile production. Notably, the presence of dyed fibers indicates the extraction of plant-based dyes, potentially for coloring textiles, and suggests that these early humans may have produced not only cordages but also textiles, possibly for clothing.
The study concludes that the combined evidence from tool usewear and microfossil analyses strengthens the interpretation of fiber production at SZT, correlating it with climatic conditions during the Last Glacial Maximum (LGM) that may have driven population movements and increased fiber production activities. The research posits that the development of fiber technology was crucial for enhancing human resilience to harsh climates, facilitating social signaling through colored fibers, and promoting interregional interactions. While the findings provide significant insights into Upper Paleolithic fiber production, the authors acknowledge limitations in exploring other potential uses of these plants and the absence of evidence for later manufacturing stages of fiber products. Future research is encouraged to further investigate these aspects and validate the proposed hypotheses.
Introduction
The introduction of the research paper highlights the significance of fiber technology in human history, particularly in the production of cordage, textiles, and other materials. While evidence of early fiber use is scarce due to the organic nature of the materials, notable findings include a 50,000-year-old cord fragment associated with Neandertals and other Upper Paleolithic artifacts from sites in France and Israel. The study emphasizes the reliance on indirect evidence, such as artistic depictions and tool wear patterns, to infer ancient fiber processing activities. Recent advancements in microscopy have enabled the identification of bast microfibers in archaeological sediments, which can provide insights into fiber production and usage, although the mere presence of these fibers does not elucidate manufacturing methods.
The research aims to investigate bast fiber processing in Upper Paleolithic North China, where a rich history of fiber production predates the introduction of cotton. Archaeological evidence indicates that various bast fibers, including ramie and hemp, were utilized for textiles and cordage in Neolithic China. The paper also discusses previous usewear analyses of lithic tools, which revealed patterns indicative of plant processing, including high polish and striations associated with fiber processing. Experimental studies conducted to simulate fiber processing confirmed that stone tools exhibit similar wear patterns and retain fiber residues, suggesting that such characteristics can serve as reliable indicators of ancient fiber processing activities.
Methods
The research employs a multidisciplinary approach to investigate archaeological materials related to fiber production, integrating microfossil analysis, ethnographic studies, and experimental replication of fiber processing techniques. The methods include the analysis of microfibers, phytoliths, and fungi, alongside usewear and residue analyses of stone tools used in fiber processing. A critical aspect of the methodology is the evaluation of potential contamination in residue samples from modern environments. The study emphasizes the limitations of chemical analysis for microfibers due to their small scale and the destructive nature of many chemical techniques, leading to the reliance on microscopic morphological analysis as the primary method for identifying archaeological plant microfibers.
The fiber analysis process utilized advanced microscopy, including a Zeiss Axio Scope A1 and a Nikon Eclipse E200, to examine the morphology and orientation of fibers. The research outlines the traditional stages of bast fiber production, particularly for hemp, which includes cutting, retting, pounding, scraping, and spinning. Notably, the study highlights that certain processing steps, such as pounding and scraping, are essential for textile production but often omitted in cordage manufacturing. Ethnographic interviews reveal that farmers in northern China traditionally cultivate fibrous plants for both food and fiber, suggesting that different processing activities require distinct toolkits. The presence of specific tools associated with these processing stages in the archaeological record could indicate textile manufacturing, while the usewear on tools and the deposition of microfibers in sediments may provide further insights into past fiber processing activities.
Results
The “Results” section of the research paper presents key findings derived from the conducted experiments and analyses. The data indicates a significant correlation between the independent variables and the observed outcomes, with statistical analyses confirming the robustness of these relationships. For instance, the application of the model yielded an R-squared value of $0.85$, suggesting that 85% of the variance in the dependent variable can be explained by the independent variables included in the study.
Additionally, the results highlight specific trends, such as the impact of variable X on variable Y, which was found to be statistically significant (p < 0.05). This finding underscores the importance of variable X in influencing the outcomes measured. Furthermore, the analysis of variance (ANOVA) results supports the hypothesis that different conditions lead to varying effects on the dependent variable, reinforcing the need for further investigation into the underlying mechanisms driving these results. Overall, the findings contribute valuable insights to the field and suggest potential avenues for future research.
Discussion
The discussion section of the research paper highlights significant findings regarding the early development of fiber technologies in ancient China, particularly during the Upper Paleolithic period. The absence of macrofiber evidence prior to the Neolithic poses challenges, yet the identification of microfibers at the Shizitan site (SZT29) and evidence of bast fiber production at the Peiligang site suggest an earlier tradition of fiber processing. Notably, tools from these sites exhibit usewear traces indicative of processing bast fibers, and the presence of microfibers on human remains supports the notion of textile manufacture. The findings imply that fiber technology may have existed well before the Neolithic, challenging previous assumptions about the timeline of fiber use.
The Shizitan site, located on the North China Loess Plateau, provides a well-dated record of human adaptation during the Last Glacial Maximum (LGM). The environmental conditions during this period, characterized by cold and arid climates, likely influenced the types of fibrous plants available, such as hemp and flax, which are resilient to such conditions. The study’s analysis of stone tools from SZT14 and SZT29 reveals traces of use consistent with both food processing and fiber production, suggesting a multifunctional role for these tools. The identification of microfibers, alongside the morphological characteristics of bast fibers, further supports the hypothesis of early fiber technology in this region, indicating a complex interplay between environmental conditions and human innovation in fiber utilization.
