DOI: https://doi.org/10.5194/se-17-369-2026
تاريخ النشر: 2026-03-03
المؤلف: Juan Portela وآخرون
الموضوع الرئيسي: دراسات الزلازل والتكتونيات
نظرة عامة
تلعب منطقة صدع السلفادور (ESFZ) دورًا حاسمًا في استيعاب الحركة التفاضلية بين القوس البركاني في أمريكا الوسطى وكتلة تشورتيس. تقدم هذه الدراسة أول نموذج كتلي حركي للسلفادور، تم تطويره من خلال دمج بيانات نظام تحديد المواقع العالمي (GNSS) وبيانات الرادار الاصطناعي التداخلي (InSAR). يقوم النموذج بتحسين التحليلات الإقليمية السابقة من خلال توضيح تقسيم الانزلاق داخل ESFZ وامتداداته إلى غواتيمالا وخليج فونسيكا. تشير النتائج إلى معدلات انزلاق إجمالية تبلغ حوالي 14-20 مم في السنة عبر وسط ESFZ، مع مساهمات مميزة من فرع شمالي (5-8 مم في السنة يميني، 3-7 مم في السنة عمودي) وفرع جنوبي (2-6 مم في السنة يميني). من الجدير بالذكر أن الحركة اليمينية تتناقص نحو صدعي جالباتاغوا وسان ميغيل لكنها تزداد مرة أخرى على طول صدع مارابيوس في نيكاراغوا.
تكشف الدراسة أيضًا أن الربط تحت السلفادور ضعيف (Φ ≈ 0.2) ومقتصر بشكل أساسي على أعماق ضحلة، مع ملاحظة ربط أقوى نحو الغرب في غواتيمالا. تؤكد النتائج وجود قوس بركاني مرتبط بقوة بجانب واجهة انزلاق مرتبطة بشكل ضعيف. من المتوقع أن تعزز القياسات الجيوديسية المستقبلية، وخاصة من ملاحظات قاع البحر ومهام الأقمار الصناعية الرادارية الجديدة، الفهم حول ربط الألواح وتشوه القشرة في هذه المنطقة النشطة زلزاليًا. بشكل عام، يوفر دمج بيانات GNSS وInSAR رؤى حاسمة حول الحركيات في ESFZ وتأثيراتها على تقييم المخاطر الزلزالية.
مقدمة
تقع جمهورية السلفادور على طول الساحل الهادئ لأمريكا الوسطى، وتتعرض لنشاط زلزالي كبير بسبب قربها من الحدود المتقاربة بين صفائح كوكوس والكاريبي. تنزلق صفيحة كوكوس تحت كتلة تشورتيس بمعدل 70-80 مم/سنة، مما يؤدي إلى النشاط البركاني على طول القوس البركاني في أمريكا الوسطى (CAVA). على الرغم من الدراسات الجيوديسية السابقة التي تشير إلى ربط ضعيف في لوح الانزلاق، فإن الأحداث الزلزالية الكبيرة، بما في ذلك الزلزال المدمر Mw 7.6 في يناير 2001، تبرز مخاطر الزلازل في المنطقة.
لقد قامت الأبحاث السابقة بتبسيط منطقة صدع السلفادور (ESFZ) إلى صدع واحد يمتد من الشرق إلى الغرب استنادًا إلى ملاحظات GNSS، لكن هذه النماذج كانت محدودة بسبب ندرة البيانات. توفر التطورات الحديثة في تقنيات GNSS وInSAR فرصة لتحسين هذه النماذج الحركية. تهدف هذه الدراسة إلى تطوير نموذج كتلي محلي لمنطقة ESFZ، مع دمج مجالات السرعة المحدثة من GNSS وInSAR لتعزيز فهم ديناميات الصدع ونهاياتها في غواتيمالا وخليج فونسيكا.
مناقشة
في هذا القسم، يناقش المؤلفون نمذجة وتحليل التشوه التكتوني في السلفادور باستخدام بيانات جيوديسية من GNSS وInSAR. يستخدمون السرعات الأفقية من محطات GNSS، المعالجة بالنسبة لإطار المرجع ITRF2014، وصور تداخل ALOS PALSAR لاشتقاق سرعات خط الرؤية (LOS). تكشف النتائج أن السرعات الأفقية من GNSS تشير إلى حركة نحو الغرب تبلغ حوالي 12 مم/سنة جنوب منطقة صدع السلفادور (ESFZ) وحركة نحو الشمال تتراوح بين 2-3 مم/سنة شمال منطقة الصدع. تؤكد سرعات ALOS LOS هذه النتائج، حيث تظهر أنماط حركة مشابهة، مما يشير إلى أن التشوه موزع بين صدع جالباتاغوا والجرابين في شرق غواتيمالا.
كما يقدم المؤلفون مجال معدل الإجهاد المستمد من السرعات الجيوديسية، مع تسليط الضوء على معدلات إجهاد قص كبيرة بالقرب من صدعي سان فيسنتي وإل تريونفو، مع هيمنة التمدد NE-SW حول ESFZ. تكشف النمذجة الحركية باستخدام برنامج TDEFNODE عن معدلات انزلاق لمختلف الصدوع، مما يشير إلى حركة يمينية وعادية تتماشى مع النظام التكتوني المتوتر في المنطقة. يتنبأ النموذج بمعدل انزلاق إجمالي يبلغ حوالي 14.7 مم/سنة بين الفروع الشمالية والجنوبية لـ ESFZ، مع اختلافات ملحوظة عن النماذج السابقة بسبب إدراج كتلة جديدة (CSAL) تستوعب التشوه عبر عدة صدوع بدلاً من صدع واحد. بشكل عام، تتماشى النتائج مع الدراسات الجيولوجية الحالية وتوفر فهمًا محسّنًا للديناميات التكتونية في السلفادور.
القيود
في هذا القسم، يحدد المؤلفون عدة قيود للنماذج الحركية التي تم تطويرها باستخدام TDEFNODE. إحدى القضايا الرئيسية هي دقة النموذج في تقييد المعلمات، والتي تتأثر بشدة بتوزيع وكثافة بيانات الإدخال، كما تم مناقشته في القسم 5.3.1. بالإضافة إلى ذلك، يبرز المؤلفون وجود تنازلات بين المعلمات خلال عملية الانعكاس، كما هو مذكور في القسم 5.3.2. علاوة على ذلك، يتم انتقاد النماذج لتبسيطها المفرط للحدود التكتونية في المناطق التي تتميز بتشوه موزع، وهو قيد تم توضيحه في الأقسام 5.1.2 و5.1.3. تؤثر هذه العوامل مجتمعة على قوة ودقة نتائج النموذج.
DOI: https://doi.org/10.5194/se-17-369-2026
Publication Date: 2026-03-03
Author(s): Juan Portela et al.
Primary Topic: earthquake and tectonic studies
Overview
The El Salvador Fault Zone (ESFZ) plays a crucial role in accommodating the differential motion between the Central America Volcanic Forearc and the Chortís block. This study presents the first kinematic block model for El Salvador, developed through the integration of Global Navigation Satellite System (GNSS) and Interferometric Synthetic Aperture Radar (InSAR) data. The model refines previous regional analyses by detailing slip partitioning within the ESFZ and its extensions into Guatemala and the Gulf of Fonseca. The findings indicate total slip rates of approximately 14-20 mm yr⁻¹ across the central ESFZ, with distinct contributions from a northern branch (5-8 mm yr⁻¹ dextral, 3-7 mm yr⁻¹ normal) and a southern branch (2-6 mm yr⁻¹ dextral). Notably, dextral motion diminishes toward the Jalpatagua and San Miguel faults but increases again along the Marrabios Fault in Nicaragua.
The study also reveals that subduction coupling beneath El Salvador is weak (Φ ≈ 0.2) and primarily confined to shallow depths, with stronger coupling observed westward into Guatemala. The results underscore a strongly coupled volcanic arc juxtaposed with a weakly coupled subduction interface. Future geodetic measurements, particularly from seafloor observations and new radar satellite missions, are anticipated to enhance understanding of slab coupling and crustal deformation in this seismically active region. Overall, the integration of GNSS and InSAR data provides critical insights into the kinematics of the ESFZ and its implications for seismic hazard assessment.
Introduction
The Republic of El Salvador, situated along the Pacific coast of Central America, experiences significant seismic activity due to its proximity to the convergent boundary of the Cocos and Caribbean tectonic plates. The Cocos Plate subducts beneath the Chortís Block at a rate of 70-80 mm/year, leading to volcanism along the Central American Volcanic Arc (CAVA). Despite previous geodetic studies indicating weak coupling in the subduction slab, substantial seismic events, including the destructive Mw 7.6 earthquake in January 2001, highlight the region’s seismic hazards.
Prior research has simplified the El Salvador Fault Zone (ESFZ) into a single east-west fault based on GNSS observations, but these models have been limited by the scarcity of data. Recent advancements in GNSS and InSAR technologies provide an opportunity to refine these kinematic models. This study aims to develop a localized block model for the ESFZ, incorporating updated GNSS and InSAR velocity fields to enhance the understanding of fault dynamics and their terminations in Guatemala and the Gulf of Fonseca.
Discussion
In this section, the authors discuss the modeling and analysis of tectonic deformation in El Salvador using geodetic data from GNSS and InSAR. They utilize horizontal velocities from GNSS stations, processed in relation to the ITRF2014 reference frame, and ALOS PALSAR interferograms to derive line-of-sight (LOS) velocities. The findings reveal that the horizontal GNSS velocities indicate approximately 12 mm/year of westward motion south of the El Salvador Fault Zone (ESFZ) and 2-3 mm/year of northward motion north of the fault zone. The ALOS LOS velocities corroborate these results, showing similar motion patterns, suggesting that deformation is distributed between the Jalpatagua fault and grabens in eastern Guatemala.
The authors also present a strain rate field derived from the geodetic velocities, highlighting significant shear strain rates near the San Vicente and El Triunfo faults, with a predominance of NE-SW extension around the ESFZ. Kinematic modeling using TDEFNODE software reveals slip rates for various faults, indicating dextral and normal motion consistent with the transtensional tectonic regime in the region. The model predicts a total slip rate of approximately 14.7 mm/year between the northern and southern branches of the ESFZ, with notable differences from previous models due to the inclusion of a new block (CSAL) that accommodates deformation across multiple faults rather than a single fault. Overall, the results align with existing geological studies and provide a refined understanding of the tectonic dynamics in El Salvador.
Limitations
In this section, the authors outline several limitations of the kinematic models developed using TDEFNODE. A primary concern is the model’s resolution in constraining parameters, which is heavily influenced by the distribution and density of the input data, as discussed in Section 5.3.1. Additionally, the authors highlight the existence of trade-offs among parameters during the inversion process, as noted in Section 5.3.2. Furthermore, the models are critiqued for their oversimplification of tectonic boundaries in regions characterized by distributed deformation, a limitation elaborated upon in Sections 5.1.2 and 5.1.3. These factors collectively impact the robustness and accuracy of the model outcomes.
