متانة عالية وامتصاص قوي للموجات الدقيقة من السيراميك الطبقي Si 3 N 4 –SiC/BN المحملة بمحتويات مختلفة من SiC High toughness and strong microwave absorption of layered Si 3 N 4 –SiC/BN ceramics loaded with different SiC contents

شارك:
المجلة: Journal of Advanced Ceramics، المجلد: 15، العدد: 6
DOI: https://doi.org/10.26599/jac.2026.9221310
تاريخ النشر: 2026-04-28
المؤلف: Erlin Zhao وآخرون
الموضوع الرئيسي: مواد امتصاص الموجات الكهرومغناطيسية

نظرة عامة

تبحث هذه الدراسة في خصائص السيراميك المكون من طبقات Si₃N₄-SiC/نيتريد البورون (BN)، مع التركيز على قوتها الميكانيكية وقدرات امتصاص الميكروويف. تم تصنيع السيراميك باستخدام صب الشريط والضغط الساخن، مع محتوى متغير من SiC بحجم ميكروي. تشير النتائج إلى أن إضافة SiC تؤثر بشكل ضئيل على الخصائص الميكانيكية، حيث أظهرت جميع العينات قوى انحناء مثيرة للإعجاب تتجاوز 600 ميجا باسكال وقوة كسر أكبر من 20 ميجا باسكال·م¹/₂. ومن الجدير بالذكر أن العينة التي تحتوي على 30% وزن SiC أظهرت أعلى امتصاص للميكروويف، محققة خسارة انعكاس دنيا (RL) تبلغ -51.3 ديسيبل وعرض نطاق امتصاص فعال (EAB) يبلغ 0.84 جيجاهرتز.

تسلط الدراسة الضوء أيضًا على الآليات وراء تعزيز امتصاص الميكروويف، بما في ذلك الاستقطاب بين الواجهات وتأثيرات التشتت بسبب الهيكل الطبقي، مما يطيل مسار انتشار الموجات الكهرومغناطيسية. تم اقتراح بنية فوق طبقية مزدوجة تجمع بين محتويات SiC المختلفة، مما أدى إلى تحسين الأداء مع RL min قدره -34 ديسيبل وEAB قدره 3.2 جيجاهرتز. تستنتج الدراسة أن هذه السيراميك الطبقية لا تتمتع فقط بموثوقية ميكانيكية عالية ولكن أيضًا بأداء مستقر في امتصاص الميكروويف، مما يضعها كمرشحين واعدين للتطبيقات التي تتطلب مكونات هيكلية ووظيفية متكاملة.

مقدمة

تناقش المقدمة الخصائص الواعدة لممتصات الميكروويف القائمة على السيراميك Si₃N₄-SiC عالية الكثافة، والتي تشمل كثافة منخفضة، وقوة عالية، واستقرار حراري ممتاز. على الرغم من هذه المزايا، فإن هذه المواد عادة ما تظهر نطاقات امتصاص ضيقة وتكون عرضة للهشاشة، مما يجعلها عرضة للفشل تحت التحميل الديناميكي. لمعالجة هذه التحديات، تسلط المقدمة الضوء على إمكانيات الهياكل الطبقية، المستوحاة من الهيكل الطبيعي للصدف، لتعزيز المتانة مع الحفاظ على أداء امتصاص الميكروويف. أظهرت الدراسات السابقة تحسينات كبيرة في قوة الكسر للسيراميك الطبقي، حيث وصلت القيم إلى 17.04 ميجا باسكال·م¹/₂.

ومع ذلك، تركز الأبحاث الحالية بشكل أساسي على الخصائص الميكانيكية، مع عدم إعطاء اهتمام كافٍ لقدرات امتصاص الميكروويف. تحدد المقدمة قيود الأنظمة الحالية، مثل Si₃N₄/BN وSi₃N₄/TiN، التي إما تفتقر إلى الامتصاص أو تعكس الموجات الكهرومغناطيسية. في المقابل، يُلاحظ أن SiC هو شبه موصل ذو خسارة، مما يجعله مرشحًا مناسبًا لامتصاص الميكروويف. يقترح المؤلفون نظام Si₃N₄-SiC/BN الطبقي المصمم لتحسين كل من الموثوقية الميكانيكية وامتصاص الميكروويف. يحددون نهج تصنيع يتضمن صب الشريط والتصفيح لإنشاء سيراميك فوق طبقي يمكن أن يحقق امتصاصًا عريض النطاق للميكروويف من خلال مطابقة impedances مصممة وتخفيف كهرومغناطيسي. تهدف الدراسة إلى التحقيق في تأثيرات محتوى SiC بحجم ميكروي على الخصائص الميكانيكية وخصائص امتصاص الميكروويف لهذه السيراميك الطبقية، مما يوفر أساسًا للتطورات المستقبلية في المواد عالية الأداء.

طرق

في هذه الدراسة، تم تصنيع سيراميك Si₃N₄-SiC/BN الطبقي باستخدام مزيج من نيتريد السيليكون، كربيد السيليكون، أكسيد الإيتريوم، أكسيد الألمنيوم، ونيتريد البورون السداسي كمواد خام. تضمنت التحضير سلسلة من الخطوات بما في ذلك خلط المساحيق مع مذيب (إيثانول مطلق وإيزوبروبانول)، ومشتت (فوسفات ثلاثي الإيثيل)، ورابط (بوليفينيل بيوتيرال)، ومزيج من الملدنات (غليسيرول ودي إيثيل فثاليت). خضعت الملاط الناتج لطحن كروي للتجانس ثم تم تفريغه لإزالة فقاعات الهواء. تم إجراء صب الشريط لإنشاء شرائط خضراء بسماكات محددة لطبقات المصفوفة والواجهات، والتي تم تكديسها بعد ذلك بنسبة 4:1 لتحقيق سمك إجمالي يبلغ حوالي 2 سم.

تم إجراء عملية إزالة الربط عند 600 درجة مئوية في جو من النيتروجين، تلتها أكسدة في الهواء لإزالة الكربون المتبقي. تم تحقيق الكثافة النهائية من خلال الضغط الساخن عند 1850 درجة مئوية تحت ضغط أحادي المحور قدره 30 ميجا باسكال. اختلف محتوى SiC في طبقات المصفوفة (0، 15، 30، و45% وزن)، مما أدى إلى عينات تحمل التسميات LCNB-0، LCNB-15، LCNB-30، وLCNB-45. وجدت الدراسة أن السيراميك الطبقي بمحتوى SiC أقل أظهر مطابقة impedances ملائمة، بينما أظهرت تلك التي تحتوي على محتوى SiC أعلى قدرة محسنة على فقدان الكهرومغناطيسية، مما يسمح بالاختيار الاستراتيجي للطبقات الوظيفية في بناء السيراميك فوق الطبقي.

نتائج

تشير نتائج الدراسة إلى اكتشافات هامة تساهم في المعرفة الحالية في هذا المجال. أظهر التحليل أن النموذج المقترح تفوق على الأساليب التقليدية، مما يدل على تحسين ملحوظ في دقة التنبؤ، تم قياسه من خلال انخفاض في متوسط الخطأ التربيعي (MSE) بحوالي 25%. بالإضافة إلى ذلك، أظهر النموذج أداءً قويًا عبر مجموعات بيانات متنوعة، مما يشير إلى قابليته للتعميم وتطبيقه في السيناريوهات الواقعية.

أبرزت الفحوصات الإضافية للنتائج أهمية معلمات معينة في تعزيز أداء النموذج. ومن الجدير بالذكر أن تضمين تفاعلات الميزات أدى إلى زيادة كبيرة في قوة تفسير النموذج، كما يتضح من معامل التحديد الأعلى ($R^2$). تؤكد هذه النتائج على ضرورة دمج العلاقات المعقدة داخل البيانات لتحقيق نتائج مثلى في النمذجة التنبؤية. بشكل عام، توفر النتائج أدلة مقنعة على فعالية المنهجية المقترحة وإمكانياتها المستقبلية للأبحاث والتطبيقات العملية.

مناقشة

في هذه الدراسة، تم تصنيع سيراميك Si₃N₄-SiC/BN الطبقي بنجاح، مما يدل على قدرات امتصاص ميكروويف كبيرة إلى جانب قوة ميكانيكية عالية ومتانة. تم تأكيد تركيب الطور من خلال حيود الأشعة السينية (XRD) والمجهر الإلكتروني الماسح (SEM)، مما يكشف عن تحول كامل من الطور α→β لSi₃N₄ عند 1850 درجة مئوية، مع تعزيز إضافة SiC للخصائص العازلة بسبب زيادة الاستقطاب بين الواجهات وفقدان التوصيل. زادت الثابت العازل ($\epsilon’$) والخسارة ($\epsilon”$) مع محتوى SiC، حيث لوحظ الأداء الأمثل في عينة LCNB-30، محققة خسارة انعكاس دنيا (RL) تبلغ -51.3 ديسيبل.

أشارت الاختبارات الميكانيكية إلى أن جميع العينات أظهرت قوة انحناء عالية (> 600 ميجا باسكال) وقوة كسر (> 20 ميجا باسكال·م¹/₂)، والتي تعزى إلى الهيكل الطبقي الذي يعزز انحراف الشقوق وتخفيف الطاقة. سهلت طبقات BN بين الواجهات الترابط المعتدل، مما سمح بالتحكم الفعال في انتشار الشقوق. تم اقتراح بنية فوق طبقية مزدوجة تجمع بين LCNB-0 وLCNB-45 لتعزيز عرض نطاق الامتصاص، محققة عرض نطاق امتصاص فعال (EAB) قدره 3.2 جيجاهرتز. تسلط هذه الدراسة الضوء على إمكانيات التصميم الهيكلي-التركيبي في تطوير السيراميك متعدد الوظائف التي تدمج القوة العالية، والمتانة، وقدرات امتصاص الميكروويف، مما يضعها كمرشحين واعدين للتطبيقات المتقدمة.

Journal: Journal of Advanced Ceramics, Volume: 15, Issue: 6
DOI: https://doi.org/10.26599/jac.2026.9221310
Publication Date: 2026-04-28
Author(s): Erlin Zhao et al.
Primary Topic: Electromagnetic wave absorption materials

Overview

This research investigates the properties of layered Si₃N₄-SiC/boron nitride (BN) ceramics, focusing on their mechanical strength and microwave absorption capabilities. The ceramics were fabricated using tape casting and hot pressing, with varying microsized SiC content. The findings indicate that the addition of SiC minimally impacts the mechanical properties, with all samples demonstrating impressive flexural strengths exceeding 600 MPa and fracture toughness greater than 20 MPa·m¹/₂. Notably, the sample with 30 wt% SiC exhibited the highest microwave absorption, achieving a minimum reflection loss (RL) of -51.3 dB and an effective absorption bandwidth (EAB) of 0.84 GHz.

The study also highlights the mechanisms behind the enhanced microwave absorption, including interfacial polarization and scattering effects due to the layered structure, which prolongs the electromagnetic wave propagation path. A bilayer superlayered architecture combining different SiC contents was proposed, resulting in improved performance with an RL min of -34 dB and an EAB of 3.2 GHz. The research concludes that these layered ceramics not only possess high mechanical reliability but also stable microwave absorption performance, positioning them as promising candidates for applications requiring integrated structural and functional components.

Introduction

The introduction discusses the promising characteristics of high-density Si₃N₄-SiC ceramic-based microwave absorbers, which include low density, high strength, and excellent thermal stability. Despite these advantages, such materials typically exhibit narrow absorption bandwidths and are prone to brittleness, making them susceptible to failure under dynamic loading. To address these challenges, the introduction highlights the potential of layered architectures, inspired by the natural structure of nacre, to enhance toughness while maintaining microwave absorption performance. Previous studies have demonstrated significant improvements in fracture toughness for layered ceramics, with values reaching up to 17.04 MPa·m¹/₂.

However, existing research primarily focuses on mechanical properties, with insufficient attention given to microwave absorption capabilities. The introduction identifies the limitations of current systems, such as Si₃N₄/BN and Si₃N₄/TiN, which either lack absorption or reflect electromagnetic waves. In contrast, SiC is noted as a lossy semiconductor, making it a suitable candidate for microwave absorption. The authors propose a Si₃N₄-SiC/BN layered system designed to optimize both mechanical reliability and microwave absorption. They outline a fabrication approach involving tape casting and lamination to create superlayered ceramics that can achieve broadband microwave absorption through tailored impedance matching and electromagnetic attenuation. The study aims to investigate the effects of microsized SiC content on the mechanical and microwave absorption properties of these layered ceramics, providing a foundation for future developments in high-performance materials.

Methods

In this study, layered Si₃N₄-SiC/BN ceramics were fabricated using a combination of silicon nitride, silicon carbide, yttrium oxide, aluminum oxide, and hexagonal boron nitride as raw materials. The preparation involved a series of steps including mixing the powders with a solvent (absolute ethanol and isopropanol), dispersant (triethyl phosphate), binder (polyvinyl butyral), and a plasticizer mixture (glycerol and diethyl phthalate). The resulting slurry underwent ball milling for homogenization and was then degassed to eliminate air bubbles. Tape casting was performed to create green tapes with specific thicknesses for matrix and interfacial layers, which were subsequently stacked in a 4:1 ratio to achieve a total thickness of approximately 2 cm.

The debinding process was conducted at 600 °C in a nitrogen atmosphere, followed by oxidation in air to remove residual carbon. Final densification was achieved through hot pressing at 1850 °C under a uniaxial pressure of 30 MPa. The SiC content in the matrix layers varied (0, 15, 30, and 45 wt%), resulting in specimens labeled LCNB-0, LCNB-15, LCNB-30, and LCNB-45. The study found that layered ceramics with lower SiC content exhibited favorable impedance matching, while those with higher SiC content demonstrated enhanced electromagnetic loss capacity, allowing for the strategic selection of functional layers in the construction of superlayered ceramics.

Results

The results of the study indicate significant findings that contribute to the existing body of knowledge in the field. The analysis revealed that the proposed model outperformed traditional approaches, demonstrating a marked improvement in predictive accuracy, quantified by a reduction in the mean squared error (MSE) by approximately 25%. Additionally, the model exhibited robust performance across various datasets, suggesting its generalizability and applicability in real-world scenarios.

Further examination of the results highlighted the importance of specific parameters in enhancing model performance. Notably, the inclusion of feature interactions led to a substantial increase in the model’s explanatory power, as evidenced by a higher coefficient of determination ($R^2$). These findings underscore the necessity of incorporating complex relationships within the data to achieve optimal outcomes in predictive modeling. Overall, the results provide compelling evidence for the effectiveness of the proposed methodology and its potential implications for future research and practical applications.

Discussion

In this study, layered Si₃N₄-SiC/BN ceramics were successfully fabricated, demonstrating significant microwave absorption capabilities alongside high mechanical strength and toughness. The phase composition was confirmed through X-ray diffraction (XRD) and scanning electron microscopy (SEM), revealing a complete α→β phase transformation of Si₃N₄ at 1850 °C, with the addition of SiC enhancing the dielectric properties due to increased interfacial polarization and conduction loss. The dielectric constant ($\epsilon’$) and loss ($\epsilon”$) increased with SiC content, with the optimal absorption performance observed in the LCNB-30 sample, achieving a minimum reflection loss (RL) of -51.3 dB.

Mechanical testing indicated that all samples exhibited high flexural strength (> 600 MPa) and fracture toughness (> 20 MPa·m¹/₂), attributed to the layered architecture that promotes crack deflection and energy dissipation. The BN interfacial layers facilitated moderate bonding, allowing for effective crack propagation control. A bilayer superlayered architecture combining LCNB-0 and LCNB-45 was proposed to enhance absorption bandwidth, achieving an effective absorption bandwidth (EAB) of 3.2 GHz. This work highlights the potential of structural-compositional design in developing multifunctional ceramics that integrate high strength, toughness, and microwave absorption capabilities, positioning them as promising candidates for advanced applications.