متى يبدأ النظام المرن في الانفصال اللزج؟
When does the elastic regime begin in viscoelastic pinch-off?

شارك:
المجلة: Journal of Fluid Mechanics، المجلد: 1005
DOI: https://doi.org/10.1017/jfm.2024.1222
تاريخ النشر: 2025-02-21
المؤلف: Antoine Gaillard وآخرون
الموضوع الرئيسي: دراسات الريولوجيا وديناميات السوائل

نظرة عامة

في هذه الدراسة، يقوم المؤلفون بالتحقيق في بداية النظام المرن أثناء الانفصال اللزج، وهو أمر حاسم لتقنيات تقليل الخيوط الحديثة المستخدمة لتقييم الخصائص التمددية لمحلولات البوليمر ذات اللزوجة المنخفضة. تشمل التقنيات مثل طريقة الانسحاب البطيء (SRM) وطريقة التنقيط تقليل الجسر السائل تدريجياً حتى يصل إلى نصف القطر الحرج، المشار إليه بـ $h_1$، حيث يبدأ النظام المرن-الشعري. يتميز هذا النظام بخيط له نصف قطر شبه موحد، ويبرز المؤلفون أن القياس النظري الحالي لهذا الانتقال، القابل للتطبيق على بروتوكول CaBER التقليدي، لا ينطبق على بروتوكول SRM الأبطأ.

تكشف الأبحاث أنه في SRM، تبدأ سلاسل البوليمر في التمدد فقط عندما تقترب سرعة التخفيف للجسر من عكس زمن الاسترخاء الخاص بها، مما يؤدي إلى سلوك قياس مختلف. يستنتج المؤلفون قياسًا عالميًا لنصف القطر الحرج $h_1$ القابل للتطبيق على كل من محلولات البوليمر ذات اللزوجة المنخفضة والعالية. يتم دعم هذا القياس من خلال نتائج تجريبية من CaBER باستخدام حلول بوليمر مختلفة وتكوينات، بالإضافة إلى محاكاة عددية تعتمد على نموذج FENE-P، مما يوضح قوة نتائجهم عبر ظروف مختلفة.

مقدمة

تناقش مقدمة هذه الورقة البحثية مرونة محلولات البوليمر، مع التركيز بشكل خاص على سلوك الخيوط التي تتشكل عند تمدد قطرة. هذه الظاهرة ذات صلة في تطبيقات صناعية متنوعة، بما في ذلك الرش والطباعة النفاثة، حيث يتم إضافة جزيئات بوليمر طويلة إلى المذيبات النيوتونية لتعديل خصائص التدفق. تسلط الورقة الضوء على أهمية ديناميات التخفيف المدفوعة بالشعيرات في تقنيات الريومترية للسوائل ذات اللزوجة المنخفضة، مثل قياس التمدد الانفصالي الشعري (CaBER) وطريقة التنقيط، التي تستخدم عدم استقرار رايلي-بلاتو لإنشاء خيوط لزجة.

يشير المؤلفون إلى نموذج Oldroyd-B لوصف سلوك التخفيف لهذه الخيوط، مشيرين إلى أن نصف قطر الخيط ينخفض بشكل أسي مع مرور الوقت، ويتميز بزمن استرخاء $\tau$. يؤكدون على أهمية نصف القطر الانتقالي $h_1$، الذي يمثل بداية النظام المرن، ويناقشون كيف يؤثر هذا نصف القطر على نصف القطر الابتدائي $h_0$ للعمود السائل. كما تنتقد الورقة النماذج الحالية والنتائج التجريبية المتعلقة بالعلاقة بين $h_1$ و $h_0$، خاصة في السيناريوهات التي يكون فيها استرخاء البوليمر كبيرًا. تهدف الدراسة إلى التحقيق بشكل أكبر في هذه العلاقة وتقديم تعبيرات نظرية لـ $h_1$، والتي سيتم التحقق منها من خلال طرق تجريبية ورقمية.

طرق

في هذا القسم، يوضح المؤلفون الطرق التجريبية المستخدمة للتحقيق في ريوولوجيا القص للسوائل وديناميات الجسور السائلة أثناء التخفيف الشعري. يستخدم الإعداد التجريبي جهاز قياس تمدد الجسر المتحكم فيه (CaBER) مع بروتوكول فصل لوح بطيء ومتدرج، حيث يتم وضع قطرة بين لوحين وسحبها تدريجياً بعيدًا. تتم مراقبة العملية باستخدام تصوير عالي السرعة لالتقاط الانتقال من جسر سائل مستقر إلى خيط، يتميز بأقل نصف قطر $h_0$ عند بداية التخفيف الشعري. تؤكد الدراسة على أهمية الحفاظ على ظروف التوازن بين الخطوات لقياس $h_0$ بدقة، والذي يتأثر بنصف قطر اللوح $R_0$ وحجم العينة غير البعدي $V^*$. تشير النتائج إلى وجود علاقة خطية بين $h_0$ و $R_0$، مع قيم تتراوح من 0.24 إلى 0.35 لأحجام مختلفة من $V^*$.

كما يصف المؤلفون الطرق العددية المستخدمة لمحاكاة ديناميات الجسر السائل باستخدام نموذج FENE-P، الذي يأخذ في الاعتبار التمدد والامتداد المحدود لسلاسل البوليمر. تشمل المعادلات الحاكمة الحفاظ على الكتلة والزخم، بالإضافة إلى العلاقات الدستورية لمتجه الإجهاد. تم تصميم المحاكاة لتكرار الظروف التجريبية، مع التركيز على المعلمات الحرجة مثل رقم أوهنسورغ، رقم ديبورا، ومعامل الامتداد المحدود. تتضمن الطريقة العددية تقسيم المجال الفيزيائي المحول وحل النظام غير الخطي الناتج باستخدام طريقة نيوتن الضمنية، مما يضمن تمثيلًا دقيقًا لديناميات التخفيف الشعري. يختتم القسم بتحديد النتائج التجريبية التي سيتم مناقشتها في الأقسام التالية، خاصة فيما يتعلق بتأثيرات نصف قطر اللوح، وحجم العينة، وتركيز البوليمر على ديناميات الانفصال.

مناقشة

في هذا القسم، يناقش المؤلفون الخصائص الريولوجية وديناميات مختلف محلولات البوليمر، وبشكل خاص بولي (أكسيد الإيثيلين) (PEO) وبولي (أكريلاميد/صوديوم أكريلات) (HPAM)، فيما يتعلق بسلوك تخفيف الخيوط أثناء تجارب الانفصال الشعري. تحدد الدراسة أن محلول PEO اللزج يتصرف كسائل بوغر مع لزوجة قص ثابتة، بينما تظهر محلولات HPAM وPEO المائية خصائص تخفيف القص عند تركيزات تتجاوز 250 جزء في المليون. تم تحديد اللزوجة الجوهرية لمحلولات PEO في الماء لتكون [η] = 2.87 م³/كغ، مع تركيز تداخل حرج \( c^* = 268 \, \text{ppm} \). كما أفاد المؤلفون أن الفرق في الإجهاد العادي الأول \( N_1 \) يتبع قانون القوة، مما يدل على سلوك قياس مختلف أدنى وأعلى من \( c^* \).

تستكشف ديناميات تخفيف الخيوط من خلال الانتقال من شكل الجسر إلى شكل الخيط، مع ملاحظات سلوك مميزة لمحلولات مختلفة. على سبيل المثال، يظهر محلول PEO المائي عدم استقرار فقاعي، بينما لا يظهر محلول PEO اللزج هذه الظاهرة. يبرز المؤلفون أن نصف القطر الانتقالي \( h_1 \) يزداد مع قطر اللوح \( 2R_0 \)، مما يشير إلى تشوه كبير للبوليمر قبل الوصول إلى نظام التخفيف الذاتي. بالإضافة إلى ذلك، يظهر أن زمن الاسترخاء الظاهر \( \tau_e \) يعتمد على تركيز البوليمر، مع علاقة قانون القوة \( \tau_e \propto c^{0.85} \) واعتماد ضعيف لـ \( h_1 \) على التركيز. تشير النتائج إلى أن النماذج التقليدية مثل Oldroyd-B قد لا تلتقط بشكل كافٍ تعقيدات ديناميات البوليمر في التدفقات التمددية، خاصة عندما لا يمكن تجاهل استرخاء البوليمر.

Journal: Journal of Fluid Mechanics, Volume: 1005
DOI: https://doi.org/10.1017/jfm.2024.1222
Publication Date: 2025-02-21
Author(s): Antoine Gaillard et al.
Primary Topic: Rheology and Fluid Dynamics Studies

Overview

In this study, the authors investigate the onset of the elastic regime during viscoelastic pinch-off, which is crucial for modern filament thinning techniques used to assess the extensional properties of low-viscosity polymer solutions. Techniques such as the slow retraction method (SRM) and the dripping method involve the gradual thinning of a liquid bridge until it reaches a critical radius, denoted as $h_1$, where the elasto-capillary regime begins. This regime is characterized by a filament with a nearly uniform radius, and the authors highlight that existing theoretical scaling for this transition, applicable to the classical step-strain CaBER protocol, does not hold for the slower SRM protocol.

The research reveals that in the SRM, polymer chains begin to stretch only when the thinning rate of the bridge approaches the inverse of their relaxation time, leading to a different scaling behavior. The authors derive a universal scaling for the critical radius $h_1$ that is applicable to both low- and high-viscosity polymer solutions. This scaling is supported by experimental results from CaBER using various polymer solutions and configurations, as well as numerical simulations based on the FENE-P model, demonstrating the robustness of their findings across different conditions.

Introduction

The introduction of this research paper discusses the elasticity of polymer solutions, particularly focusing on the behavior of filaments formed when a droplet is stretched. This phenomenon is relevant in various industrial applications, including spraying and inkjet printing, where long polymer molecules are added to Newtonian solvents to modify flow properties. The paper highlights the significance of capillary-driven thinning dynamics in rheometry techniques for low-viscosity fluids, such as capillary breakup extensional rheometry (CaBER) and the dripping method, which utilize the Rayleigh-Plateau instability to create viscoelastic filaments.

The authors reference the Oldroyd-B model to describe the thinning behavior of these filaments, noting that the filament radius decreases exponentially over time, characterized by a relaxation time $\tau$. They emphasize the importance of the transition radius $h_1$, which marks the onset of the elastic regime, and discuss how this radius is influenced by the initial radius $h_0$ of the liquid column. The paper also critiques existing models and empirical findings regarding the relationship between $h_1$ and $h_0$, particularly in scenarios where polymer relaxation is significant. The study aims to further investigate this relationship and provide theoretical expressions for $h_1$, which will be validated through experimental and numerical methods.

Methods

In this section, the authors detail the experimental methods used to investigate the shear rheology of liquids and the dynamics of liquid bridges during capillary thinning. The experimental setup employs a Controlled Bridge Extension Rheometer (CaBER) with a slow, stepwise plate separation protocol, where a droplet is placed between two plates and gradually pulled apart. The process is monitored using high-speed imaging to capture the transition from a stable liquid bridge to a filament, characterized by the minimum radius $h_0$ at the onset of capillary thinning. The study emphasizes the importance of maintaining equilibrium conditions between steps to accurately measure $h_0$, which is influenced by the plate radius $R_0$ and the non-dimensional sample volume $V^*$. The results indicate a linear relationship between $h_0$ and $R_0$, with values ranging from 0.24 to 0.35 for varying $V^*$.

The authors also describe the numerical methods employed to simulate the dynamics of the liquid bridge using the FENE-P model, which accounts for the stretching and finite extensibility of polymer chains. The governing equations include mass and momentum conservation, along with constitutive relationships for the stress tensor. The simulations are designed to replicate the experimental conditions, focusing on the critical parameters such as the Ohnesorge number, Deborah number, and the finite extensibility parameter. The numerical approach involves discretizing the transformed physical domain and solving the resulting nonlinear system using an implicit Newton method, ensuring accurate representation of the capillary thinning dynamics. The section concludes by outlining the experimental results that will be discussed in subsequent sections, particularly regarding the effects of plate radius, sample volume, and polymer concentration on pinch-off dynamics.

Discussion

In this section, the authors discuss the rheological properties and dynamics of various polymer solutions, specifically poly(ethylene oxide) (PEO) and poly(acrylamide/sodium acrylate) (HPAM), in relation to their filament thinning behavior during capillary breakup experiments. The study identifies that the PEO visc solution behaves as a Boger fluid with constant shear viscosity, while the HPAM and aqueous PEO solutions exhibit shear-thinning characteristics at concentrations exceeding 250 ppm. The intrinsic viscosity for PEO solutions in water is determined to be [η] = 2.87 m³/kg, with a critical overlap concentration \( c^* = 268 \, \text{ppm} \). The authors also report that the first normal stress difference \( N_1 \) follows a power law, indicating different scaling behaviors below and above \( c^* \).

The dynamics of filament thinning are explored through the transition from a bridge shape to a filament shape, with distinct behaviors observed for different solutions. For instance, the PEO aq solution shows a blistering instability, while the PEO visc solution does not exhibit this phenomenon. The authors highlight that the transition radius \( h_1 \) increases with the plate diameter \( 2R_0 \), suggesting significant polymer deformation prior to reaching the self-similar thinning regime. Additionally, the apparent relaxation time \( \tau_e \) is shown to depend on polymer concentration, with a power law relationship \( \tau_e \propto c^{0.85} \) and a weak dependence of \( h_1 \) on concentration. The findings indicate that traditional models like Oldroyd-B may not adequately capture the complexities of polymer dynamics in extensional flows, particularly when polymer relaxation cannot be neglected.