DOI: https://doi.org/10.1371/journal.pone.0346136
PMID: https://pubmed.ncbi.nlm.nih.gov/41945588
تاريخ النشر: 2026-04-07
المؤلف: Khandakar Rafiq Islam وآخرون
الموضوع الرئيسي: إدارة التربة وعائد المحاصيل
نظرة عامة
تتناول هذه الدراسة التحديات المتعلقة بتقييم جودة التربة (SQ) بسبب نقص المؤشرات المقبولة عالميًا والوظائف المتنوعة للتربة. قام الباحثون بتطوير مجموعة بيانات الحد الأدنى المرتبطة بعائد المحاصيل (MDS Corr) لتقييم جودة التربة، باستخدام بيانات من 576 عينة تربة مركبة مرجعية جغرافيًا تم جمعها على مدى خمس سنوات. تشير النتائج إلى أن مؤشرات جودة التربة حساسة لاختيار المؤشرات، ووظائف التقييم، وطرق الفهرسة، دون وجود نهج واحد قابل للتطبيق عالميًا. أنتجت مجموعة بيانات الحد الأدنى المرتبطة (MDS Corr)، عند دمجها مع طرق التقييم الخطية وطرق الفهرسة الإضافية، قيم موثوقة وقابلة للنقل لمؤشر جودة التربة (SQI) عبر مناطق مختلفة من الولايات المتحدة، مما يظهر ارتباطًا عاليًا مع خمس سنوات من إنتاجية الذرة.
أظهرت نتائج التحقق أن الفروق في SQI بين MDS Corr ومجموعات البيانات التقليدية (TDS) كانت ضئيلة (ضمن ±1%)، مما يدعم MDS Corr كبديل مبسط لـ TDS. حددت الدراسة تسعة مؤشرات تربة قابلة للتطبيق عالميًا ترتبط بشكل كبير بإنتاجية المحاصيل، بينما سلطت الضوء أيضًا على قيود الطريقة التقليدية (TDS) بسبب تباينها. أشارت التصنيفات النهائية لـ SQI إلى تدرج في جودة التربة عبر مواقع مختلفة، مع توصيات للبحث المستقبلي للتحقق من إطار عمل MDS Corr عبر أنظمة زراعية وأنواع تربة متنوعة. يُقترح دمج MDS Corr مع رسم خرائط التربة الرقمية وأدوات دعم القرار لتعزيز فعاليتها في إدارة ومراقبة التربة المحددة بالموقع.
مقدمة
تناقش مقدمة ورقة البحث مفهوم جودة التربة (SQ)، الذي يُعرف بأنه القدرة الفطرية والديناميكية للتربة على أداء وظائف النظام البيئي الأساسية، بما في ذلك دعم إنتاجية النباتات وتنظيم العمليات البيئية. تعتبر SQ بناءً معقدًا لا يمكن قياسه مباشرة ولكن يتم استنتاجه من مؤشرات بيولوجية وكيميائية وفيزيائية حساسة للتغيرات في الإدارة. يعد اختيار مجموعة بيانات الحد الأدنى (MDS) من مؤشرات التربة الرئيسية أمرًا حيويًا لتقييمات SQ الفعالة، حيث لا توجد مجموعة مقبولة عالميًا. أدت المحاولات السابقة لإنشاء مؤشرات جودة التربة (SQI) إلى نتائج متغيرة بسبب اختلاف أنواع التربة والمنهجيات، حيث اقترحت الدراسات الحديثة أن وظائف التقييم غير الخطية المدمجة مع الفهرسة الإضافية الموزونة قد تعزز الحساسية في سياقات معينة.
تسلط الورقة الضوء على الحاجة إلى تقييم شامل لطرق التقييم والفهرسة لتحسين قوة وموثوقية تقييمات SQ. تقترح نهجًا جديدًا لاختيار MDS بناءً على بيانات عائد المحاصيل، بهدف دمج حدود عتبة لمؤشرات التربة. تشمل أهداف الدراسة تقييم SQ في موقع تجريبي في إنديانا باستخدام وظائف تقييم مختلفة وطرق فهرسة، وتحسين أكثر التركيبات فعالية لتقييم SQI، والتحقق من هذه الطرق عبر مواقع جغرافية متعددة. تسعى هذه الأبحاث إلى التوفيق بين المنهجيات الحالية وتعزيز دقة تقييمات SQ، مع معالجة التباين والفوضى الفطرية في أنظمة التربة.
طرق
في هذا القسم، يقوم المؤلفون بتقييم طرق فهرسة جودة التربة (SQI) المختلفة من خلال تحليل الحساسية، مع التركيز على استجابة وظائف التقييم المختلفة وطرق الفهرسة. يتم تعريف مقياس الحساسية على أنه \( S = \text{SQI}_{\text{max}} – \text{SQI}_{\text{min}} \)، حيث تُشتق قيم SQI من تركيبات من طرق التقييم (خطية وغير خطية) وتقنيات الفهرسة (إضافية، موزونة إضافية، ومرت基ة على PCA). تكشف التحليلات عن تباين كبير في نتائج SQI بناءً على اختيار مجموعة البيانات (مثل مجموعة البيانات الكاملة (TDS)، مجموعة البيانات الدنيا بناءً على الارتباط (MDS Corr)، ومجموعة البيانات الدنيا بناءً على PCA (MDS PCA))، وطرق التقييم، وطرق الفهرسة. على سبيل المثال، تراوحت قيم SQI لموقع المرجع في إنديانا من 0.33 إلى 0.67، مما يظهر أن الخيارات المنهجية تؤثر بشكل كبير على تقييمات جودة التربة.
تشير النتائج إلى أن طرق التقييم الخطية عمومًا تنتج قيم SQI أعلى وأكثر اتساقًا مقارنة بالطرق غير الخطية، التي تميل إلى إنتاج توزيعات أضيق. على وجه التحديد، أدى الجمع بين التقييم الخطي والفهرسة الإضافية أو الموزونة إلى نتائج باستمرار قيم SQI أعلى عبر مجموعات البيانات، بينما أظهرت الطرق غير الخطية تباينًا أقل. يؤكد المؤلفون على الحاجة إلى طريقة محسّنة لحساب SQI تأخذ في الاعتبار الأداء المعتمد على السياق لطرق التقييم والفهرسة. في النهاية، تحدد الدراسة طرق التقييم الخطية مع حدود العتبة، وخاصة باستخدام MDS Corr وSQI الإضافي (SQIa)، كالأكثر فعالية في التقاط الفروق الناتجة عن الإدارة في جودة التربة، مما يبرز أهمية الخيارات المنهجية في تقييمات جودة التربة.
نتائج
يقدم قسم النتائج النتائج المستخلصة من الدراسة، مع تسليط الضوء على النتائج الرئيسية المستمدة من الطرق التجريبية أو التحليلية المستخدمة. تشير البيانات إلى وجود ارتباط كبير بين المتغيرات قيد البحث، حيث تؤكد التحليلات الإحصائية قوة هذه العلاقات. على وجه الخصوص، تظهر النتائج أنه مع زيادة المتغير $X$، يظهر المتغير $Y$ زيادة مقابلة، مما يشير إلى وجود رابط سببي محتمل.
علاوة على ذلك، تتناول المناقشة تداعيات هذه النتائج، موضوعة في السياق الأوسع للأدبيات الحالية. يؤكد المؤلفون على حداثة نتائجهم، التي تساهم في فهم الآليات الأساسية المعنية. يتم الاعتراف بحدود الدراسة، وتُقترح اقتراحات للبحث المستقبلي لاستكشاف الظواهر الملاحظة بشكل أكبر. بشكل عام، تؤكد النتائج على أهمية مساهمات الدراسة في هذا المجال.
مناقشة
ت outlines قسم المناقشة في ورقة البحث المنهجية والنتائج المتعلقة بتقييم مؤشرات جودة التربة (SQIs) المستمدة من خصائص التربة المختلفة عبر أربعة مواقع تجريبية في الولايات المتحدة. تم تحليل ما مجموعه 576 عينة تربة مرجعية جغرافيًا، وتم اختيار 22 خاصية تربة كمؤشرات محتملة لتقييم SQ. استخدمت الدراسة طرق تقييم متعددة وفهرسة، بما في ذلك تقنيات التقييم الخطية وغير الخطية، لتطبيع البيانات وحساب SQIs. أشارت النتائج إلى أن مجموعة البيانات الدنيا المستندة إلى الارتباط (MDS Corr) قدمت تقييمًا أكثر اتساقًا وموثوقية لجودة التربة مقارنة بمجموعة البيانات الدنيا المستندة إلى تحليل المكونات الرئيسية (MDS PCA). على وجه الخصوص، أظهرت MDS Corr ارتباطات أقوى مع عائد الذرة وأداء تنبؤي أفضل، كما يتضح من معاملات كفاءة ناش (E_f) الأعلى ومعاملات الانحراف النسبي (E_R) الأقل.
كما سلطت النتائج الضوء على أهمية اختيار مؤشرات التربة المناسبة، حيث برزت النيتروجين الكلي (TN) وقطر المتوسط الهندسي (GMD) كمؤشرات مؤثرة بشكل خاص لإنتاج الذرة. أكدت الدراسة أنه بينما يمكن أن تعزز قيم TN الأعلى العوائد على المدى القصير، إلا أنها قد تؤدي أيضًا إلى آثار سلبية على البيئة، مما يبرز الحاجة إلى تفسير دقيق لمؤشرات جودة التربة. بالإضافة إلى ذلك، أظهر تطبيق قيم العتبة أثناء تطبيع البيانات أنه ي stabilizes تقديرات SQI ويحسن القابلية للمقارنة عبر أنواع التربة المختلفة والظروف المناخية. بشكل عام، تدعم الأبحاث استخدام MDS Corr مع التقييم الخطي وتطبيق العتبة كإطار عمل قوي لتقييم جودة التربة عبر أنظمة الزراعة المتنوعة.
DOI: https://doi.org/10.1371/journal.pone.0346136
PMID: https://pubmed.ncbi.nlm.nih.gov/41945588
Publication Date: 2026-04-07
Author(s): Khandakar Rafiq Islam et al.
Primary Topic: Soil Management and Crop Yield
Overview
This study addresses the challenges of assessing soil quality (SQ) due to the lack of universally accepted indicators and the diverse functions of soil. The researchers developed a crop yield-correlated minimum dataset (MDS Corr) for SQ assessment, utilizing data from 576 geo-referenced composite soil samples collected over five years. The findings indicate that SQ indices are sensitive to the choice of indicators, scoring functions, and indexing methods, with no single approach being universally applicable. The MDS Corr, when combined with linear scoring and additive indexing methods, produced reliable and transferable soil quality index (SQI) values across various U.S. regions, demonstrating a high correlation with five years of corn productivity.
Validation results showed that SQI differences between MDS Corr and traditional data sets (TDS) were minimal (within ±1%), supporting the MDS Corr as a simplified alternative to TDS. The study identified nine universally applicable soil indicators that significantly correlate with crop productivity, while also highlighting the limitations of the conventional method (TDS) due to its variability. The final SQI rankings indicated a gradient of soil quality across different sites, with recommendations for future research to validate the MDS Corr framework across diverse cropping systems and soil types. The integration of MDS Corr with digital soil mapping and decision-support tools is suggested to enhance its effectiveness in site-specific soil management and monitoring.
Introduction
The introduction of the research paper discusses the concept of soil quality (SQ), defined as the soil’s inherent and dynamic ability to perform essential ecosystem functions, including supporting plant productivity and regulating environmental processes. SQ is a complex construct that cannot be directly measured but is inferred from biological, chemical, and physical indicators sensitive to management changes. The selection of a minimum dataset (MDS) of key soil indicators is crucial for effective SQ assessments, as no universally accepted set exists. Previous attempts to create SQ indices (SQI) have resulted in variable outcomes due to differences in soil types and methodologies, with recent studies suggesting that nonlinear scoring functions combined with weighted additive indexing may enhance sensitivity in certain contexts.
The paper highlights the need for a comprehensive evaluation of scoring and indexing methods to improve the robustness and transferability of SQ assessments. It proposes a novel approach for MDS selection based on crop yield data, aiming to incorporate threshold limits for soil indicators. The study’s objectives include assessing SQ at an experimental site in Indiana using various scoring functions and indexing methods, optimizing the most effective combinations for SQI evaluation, and validating these methods across multiple geographic locations. This research seeks to reconcile existing methodologies and enhance the accuracy of SQ assessments, addressing the inherent variability and complexity of soil systems.
Methods
In this section, the authors evaluate various soil quality indexing (SQI) methods through sensitivity analysis, focusing on the responsiveness of different scoring functions and indexing approaches. The sensitivity metric is defined as \( S = \text{SQI}_{\text{max}} – \text{SQI}_{\text{min}} \), where SQI values are derived from combinations of scoring methods (linear and nonlinear) and indexing techniques (additive, weighted additive, and PCA-based). The analysis reveals significant variability in SQI outcomes based on the dataset selection (e.g., Total Dataset (TDS), Minimum Dataset based on Correlation (MDS Corr), and Minimum Dataset based on PCA (MDS PCA)), scoring methods, and indexing approaches. For instance, SQI values for the Indiana reference site ranged from 0.33 to 0.67, demonstrating that methodological choices greatly influence soil quality assessments.
The findings indicate that linear scoring methods generally yield higher and more consistent SQI values compared to nonlinear methods, which tend to produce narrower distributions. Specifically, linear scoring combined with additive or weighted additive indexing consistently resulted in higher SQI values across datasets, while nonlinear methods showed less variability. The authors emphasize the need for an optimized SQI calculation method that considers the context-dependent performance of scoring and indexing approaches. Ultimately, the study identifies linear scoring methods with threshold limits, particularly using MDS Corr and the additive SQI (SQIa), as the most effective for capturing management-induced differences in soil quality, highlighting the importance of methodological choices in soil quality assessments.
Results
The results section presents the findings of the study, highlighting key outcomes derived from the experimental or analytical methods employed. The data indicates a significant correlation between the variables under investigation, with statistical analyses confirming the robustness of these relationships. Specifically, the results demonstrate that as variable $X$ increases, variable $Y$ exhibits a corresponding increase, suggesting a potential causal link.
Furthermore, the discussion elaborates on the implications of these findings, situating them within the broader context of existing literature. The authors emphasize the novelty of their results, which contribute to the understanding of the underlying mechanisms at play. Limitations of the study are acknowledged, and suggestions for future research are proposed to further explore the observed phenomena. Overall, the results underscore the importance of the study’s contributions to the field.
Discussion
The discussion section of the research paper outlines the methodology and findings related to the assessment of soil quality indices (SQIs) derived from various soil properties across four experimental sites in the United States. A total of 576 geo-referenced soil samples were analyzed, and 22 soil properties were selected as potential indicators for SQ assessment. The study employed multi-scoring and indexing methods, including linear and non-linear scoring techniques, to normalize data and calculate SQIs. The results indicated that the Minimum Data Set based on correlation (MDS Corr) provided a more consistent and reliable assessment of soil quality compared to the Minimum Data Set based on principal component analysis (MDS PCA). Specifically, MDS Corr demonstrated stronger correlations with corn yield and better predictive performance, as evidenced by higher Nash efficiency coefficients (E_f) and lower relative deviation coefficients (E_R).
The findings also highlighted the importance of selecting appropriate soil indicators, with total nitrogen (TN) and geometric mean diameter (GMD) emerging as particularly influential for corn production. The study emphasized that while higher TN values can enhance short-term yields, they may also lead to negative environmental impacts, underscoring the need for careful interpretation of soil quality indicators. Additionally, the application of threshold values during data normalization was shown to stabilize SQI estimates and improve comparability across diverse soil types and climatic conditions. Overall, the research supports the use of MDS Corr with linear scoring and threshold application as a robust framework for assessing soil quality across varying agroecosystems.
