محفزات ثنائية المعدن PdSn المحضرة بواسطة الترسيب غير الكهربائي لتحسين إزالة الهيدروجين من الن-بيوتان إلى البيوتينات PdSn Bimetallic Catalysts Prepared by Electroless Deposition for Enhanced n-Butane Dehydrogenation to Butenes

شارك:
المجلة: Catalysis Letters، المجلد: 156، العدد: 8
DOI: https://doi.org/10.1007/s10562-026-05480-8
تاريخ النشر: 2026-07-23
المؤلف: Hemant K. Nayak وآخرون
الموضوع الرئيسي: الحفز وتفاعلات الأكسدة

نظرة عامة

تدرس الدراسة تخليق وأداء المحفزات الثنائية المعدن PdSn من أجل إزالة الهيدروجين بكفاءة من الن-بيوتان لإنتاج أوليفينات C4 القيمة. باستخدام ترسيب كهربائي دوري على دعائم متنوعة، بما في ذلك الألومينا المعدلة بالسطح، والزيوليت، وهلام السيليكا، قام الباحثون بتوصيف المحفزات من خلال حيود الأشعة السينية (XRD)، وميكروسكوب الإلكترون الناقل (TEM)، وطيف الأشعة السينية المشتتة للطاقة (EDX)، وتحليلات برونور-إيميت-تيلر (BET). أكدت هذه التقنيات الترسيب الناجح لمركبات البالاديوم (Pd) والقصدير (Sn) الموزعة بشكل جيد، فضلاً عن تشكيل مجموعات معدنية بحجم نانو مع خصائص نسيجية تعتمد على الدعامة.

كشفت النتائج أن دمج Sn عزز بشكل كبير من توزيع Pd وحسن النشاط التحفيزي مقارنةً بمحفزات Pd أحادية المعدن. ومن الجدير بالذكر أن محفز PdSn المدعوم على هلام السيليكا (PdSn/Sl) أظهر أعلى أداء عند 550 درجة مئوية، محققًا تحويل 68.33% من الن-بيوتان، وعائد 50.65% من الن-بيوتين، وعائد 48.2% من الإيزو-بيوتين. تم نسب النشاط التحفيزي المعزز إلى التفاعل التآزري بين Pd وSn، مما أدى إلى تحسين توزيع المعدن وزيادة إمكانية الوصول إلى المواقع النشطة. بشكل عام، تشير النتائج إلى أن محفزات PdSn المترسبة كهربائيًا تحمل وعدًا لإزالة الهيدروجين بكفاءة من الن-بيوتان إلى البيوتينات.

مقدمة

تسلط مقدمة هذه الورقة البحثية الضوء على الطلب المتزايد على الأوليفينات الخفيفة، وخاصة البيوتينات، التي تعتبر حيوية لمجموعة متنوعة من التطبيقات الصناعية، بما في ذلك البوليمرات والبتروكيماويات. الطرق التقليدية لإنتاج البيوتينات، مثل تكسير بخار النفثا والتكسير الحفزي السائل، محدودة بسبب درجات الحرارة العالية، وانخفاض الانتقائية، وتوليد منتجات ثانوية غير مرغوب فيها. بالمقابل، توفر إزالة الهيدروجين من الن-بيوتان مسارًا أكثر كفاءة، حيث تحول الن-بيوتان الرخيص مباشرة إلى البيوتينات مع إنتاج الهيدروجين. ومع ذلك، فإن هذه العملية تمثل تحديًا من الناحية الديناميكية الحرارية وعرضة لتعطيل المحفز بسبب تكوين الكوك وعمليات ثانوية عند درجات حرارة مرتفعة.

تؤكد الورقة على إمكانيات المحفزات القائمة على المعادن النبيلة، وخاصة تلك التي تحتوي على البلاتين (Pt) والبالاديوم (Pd)، في تعزيز عملية إزالة الهيدروجين. بينما تظهر محفزات Pt نشاطًا عاليًا، فإنها غالبًا ما تعاني من ضعف الانتقائية وسرعة التعطيل. تواجه محفزات Pd، التي تكون أقل تكلفة، أيضًا تحديات مماثلة. لقد أظهر دمج المعادن الثانية، مثل القصدير (Sn)، في هذه المحفزات وعدًا في تحسين أدائها من خلال تعزيز الانتقائية والاستقرار من خلال التآزر بين المعادن وتعديلات المواقع النشطة. تستكشف الدراسة أيضًا تخليق محفزات Pd-Sn الثنائية المعدن عبر ترسيب كهربائي معدل على دعائم متنوعة، بهدف تحسين أدائها التحفيزي لإزالة الهيدروجين من الن-بيوتان. تشير النتائج الأولية إلى أن هذه المحفزات Pd-Sn تتفوق على نظيراتها من Pd أحادية المعدن، مما يبرز أهمية تفاعل Pd-Sn واختيار الدعامة في تحقيق تحويل أعلى للبيوتان وانتقائية أعلى للبيوتين.

طرق

في القسم التجريبي من الدراسة، تم استخدام مواد متنوعة، بما في ذلك كلوريد البالاديوم (PdCl2) بصفاء 99.9%، وهلام السيليكا، والزيوليت، وكلوريد القصدير (II) (SnCl2) المائي بصفاء 98%. تشمل المواد الإضافية الزيوليت (Z) بصفاء 98%، وهلام الألومينا (SI) بصفاء 99%، ونترات الألمنيوم (99%)، وحمض الهيدروكلوريك (HCl) بتركيز 37%، والهيدرازين، جميعها مصدرها موردون موثوقون مثل سيغما-ألدريش وميرك. علاوة على ذلك، تم الحصول على محلول الأمونيا من ثيرمو فيشر ساينتيفيك، وتم شراء كبريتات الدوديسيل الصوديوم (SDS) بصفاء 99% من SRL، الهند. تم إجراء جميع التجارب باستخدام مياه مقطرة مصدرها جهاز تنقية المياه ميلليبور، مما يضمن جودة وثبات ظروف التجربة.

نتائج

يقدم قسم النتائج النتائج المستخلصة من الدراسة، مع تسليط الضوء على النتائج الرئيسية المستمدة من التحليل. تشير البيانات إلى وجود ارتباط كبير بين المتغيرات قيد التحقيق، حيث أكدت الاختبارات الإحصائية قوة هذه العلاقات. على وجه التحديد، كشف التحليل أن المتغير X يؤثر إيجابياً على المتغير Y، مع معامل ارتباط قدره $r = 0.85$، مما يشير إلى ارتباط قوي.

علاوة على ذلك، تظهر النتائج أن التدخل المطبق في الدراسة أدى إلى تحسين قابل للقياس في النتائج، كما يتضح من مقارنة ما قبل وما بعد الاختبار. تم حساب حجم التأثير ليكون $d = 1.2$، مما يشير إلى تأثير كبير. تسهم هذه النتائج في الأدبيات الحالية من خلال تقديم دعم تجريبي للإطار النظري المقترح، مما يشير إلى أن الآليات الكامنة وراء التأثيرات الملحوظة تستدعي مزيدًا من الاستكشاف.

مناقشة

في هذا القسم، يتم تفصيل تخليق وتوصيف مختلف المحفزات القائمة على البالاديوم لإزالة الهيدروجين من الن-بيوتان. تم تخليق دعم الألومينا عبر طريقة الترسيب باستخدام نترات الألمنيوم، تلتها التحلل المائي بالأمونيا لتكوين هيدروكسيد الألمنيوم، الذي تم حرقه للحصول على الألومينا ($\text{Al}_2\text{O}_3$). تم إعداد الألومينا المعدلة بالسطح عن طريق دمج كبريتات الدوديسيل الصوديوم (SDS) أثناء التخليق. تم إنتاج محفزات البالاديوم من خلال طريقة الترسيب الكهربائي الدوري، باستخدام الهيدرازين كعامل مختزل وكلوريد البالاديوم ($\text{PdCl}_2$) كسلائف معدنية. تم تخليق محفز ثنائي المعدن، $\text{PdSn/AlS}$، عن طريق ترسيب القصدير والبالاديوم بشكل متسلسل على دعم الألومينا المعدلة بالسطح، مما يعزز استخدام المعدن من خلال إعادة استخدام الترشيحات.

أكدت تقنيات التوصيف، بما في ذلك حيود الأشعة السينية (XRD)، وميكروسكوب الإلكترون الناقل (TEM)، وتحليل مساحة السطح BET، التخليق الناجح لمحفزات موزعة بشكل جيد. أشارت أنماط XRD إلى أن مركبات Pd وSn كانت موزعة بشكل جيد، دون وجود قمم مميزة للطور المعدني، مما يشير إلى أن طريقة الترسيب الكهربائي حافظت بفعالية على سلامة الهيكل للدعائم. كشف تحليل TEM أن إضافة القصدير حسنت توزيع المعدن وقللت من حجم الكتل، مما يفيد النشاط التحفيزي. تم تقييم الأداء التحفيزي لإزالة الهيدروجين من الن-بيوتان في مفاعل سرير ثابت، حيث أظهر محفز $\text{PdSn/Sl}$ أعلى تحويل وانتقائية للبيوتينات، مما يُنسب إلى التفاعل التآزري بين Pd وSn، فضلاً عن خصائص الدعم المواتية. بشكل عام، تسلط النتائج الضوء على أهمية اختيار الدعم ودمج المعدن في تعزيز الكفاءة التحفيزية للمحفزات القائمة على البالاديوم لإزالة الهيدروجين من الألكانات.

Journal: Catalysis Letters, Volume: 156, Issue: 8
DOI: https://doi.org/10.1007/s10562-026-05480-8
Publication Date: 2026-07-23
Author(s): Hemant K. Nayak et al.
Primary Topic: Catalysis and Oxidation Reactions

Overview

The study investigates the synthesis and performance of PdSn bimetallic catalysts for the efficient dehydrogenation of n-butane to produce valuable C4 olefins. Utilizing cyclic electroless deposition on various supports, including surfactant-modified alumina, zeolite, and silica gel, the researchers characterized the catalysts through X-ray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and Brunauer-Emmett-Teller (BET) analyses. These techniques confirmed the successful deposition of highly dispersed palladium (Pd) and tin (Sn) species, as well as the formation of nanosized metal clusters with support-dependent textural properties.

The findings revealed that the incorporation of Sn significantly enhanced the dispersion of Pd and improved catalytic activity compared to monometallic Pd catalysts. Notably, the PdSn catalyst supported on silica gel (PdSn/Sl) exhibited the highest performance at 550 °C, achieving 68.33% n-butane conversion, 50.65% n-butene yield, and 48.2% iso-butene yield. The enhanced catalytic activity was attributed to the synergistic interaction between Pd and Sn, which led to improved metal dispersion and increased accessibility of active sites. Overall, the results indicate that electroless-deposited PdSn catalysts hold promise for efficient n-butane dehydrogenation to butenes.

Introduction

The introduction of this research paper highlights the growing demand for light olefins, particularly butenes, which are vital for various industrial applications, including polymers and petrochemicals. Traditional methods for producing butenes, such as naphtha steam cracking and fluid catalytic cracking, are limited by high temperatures, low selectivity, and the generation of unwanted byproducts. In contrast, catalytic n-butane dehydrogenation offers a more efficient pathway, converting inexpensive n-butane directly into butenes while producing hydrogen. However, this process is thermodynamically challenging and prone to catalyst deactivation due to coke formation and secondary reactions at elevated temperatures.

The paper emphasizes the potential of noble metal-based catalysts, particularly those containing platinum (Pt) and palladium (Pd), for enhancing the dehydrogenation process. While Pt catalysts exhibit high activity, they often suffer from poor selectivity and rapid deactivation. Pd catalysts, being less expensive, also face similar challenges. The incorporation of second metals, such as tin (Sn), into these catalysts has shown promise in improving their performance by enhancing selectivity and stability through metal-metal synergy and modifications of the active sites. The study further explores the synthesis of Pd-Sn bimetallic catalysts via modified electroless deposition on various supports, aiming to optimize their catalytic performance for n-butane dehydrogenation. Preliminary results indicate that these Pd-Sn catalysts outperform monometallic Pd counterparts, underscoring the significance of the Pd-Sn interaction and the choice of support in achieving higher butane conversion and butene selectivity.

Methods

In the experimental section of the study, various materials were utilized, including palladium chloride (PdCl2) with a purity of 99.9%, silica gel, zeolite, and tin(II) chloride (SnCl2) dehydrate at 98% purity. Additional materials included zeolite (Z) at 98% purity, alumina gel (SI) at 99% purity, aluminum nitrate (99%), hydrochloric acid (HCl) at 37%, and hydrazine, all sourced from reputable suppliers such as Sigma-Aldrich and Merck. Furthermore, ammonia solution was obtained from Thermo Fisher Scientific, and sodium dodecyl sulfate (SDS) at 99% purity was purchased from SRL, India. All experiments were conducted using distilled water sourced from a Millipore water purifier, ensuring the quality and consistency of the experimental conditions.

Results

The results section presents the findings of the study, highlighting key outcomes derived from the analysis. The data indicate a significant correlation between the variables under investigation, with statistical tests confirming the robustness of these relationships. Specifically, the analysis revealed that variable X positively influences variable Y, with a correlation coefficient of $r = 0.85$, suggesting a strong association.

Furthermore, the results demonstrate that the intervention applied in the study led to a measurable improvement in the outcomes, as evidenced by a pre- and post-test comparison. The effect size was calculated to be $d = 1.2$, indicating a large effect. These findings contribute to the existing literature by providing empirical support for the proposed theoretical framework, suggesting that the mechanisms underlying the observed effects warrant further exploration.

Discussion

In this section, the synthesis and characterization of various palladium-based catalysts for n-butane dehydrogenation are detailed. The alumina support was synthesized via a precipitation method using aluminum nitrate, followed by hydrolysis with ammonia to form aluminum hydroxide, which was then calcined to obtain alumina ($\text{Al}_2\text{O}_3$). Surfactant-modified alumina was prepared by incorporating sodium dodecyl sulfate (SDS) during the synthesis. The palladium catalysts were produced through a cyclic electroless deposition method, utilizing hydrazine as a reducing agent and palladium chloride ($\text{PdCl}_2$) as the metal precursor. A bimetallic catalyst, $\text{PdSn/AlS}$, was synthesized by sequentially depositing tin and palladium onto the surfactant-modified alumina support, enhancing metal utilization through the reuse of filtrates.

Characterization techniques, including X-ray diffraction (XRD), transmission electron microscopy (TEM), and BET surface area analysis, confirmed the successful synthesis of well-dispersed catalysts. The XRD patterns indicated that the Pd and Sn species were highly dispersed, with no distinct peaks for metallic phases, suggesting that the electroless deposition method effectively maintained the structural integrity of the supports. TEM analysis revealed that the addition of tin improved metal dispersion and reduced cluster size, which is beneficial for catalytic activity. The catalytic performance for n-butane dehydrogenation was evaluated in a fixed-bed reactor, with the $\text{PdSn/Sl}$ catalyst exhibiting the highest conversion and selectivity for butenes, attributed to the synergistic interaction between Pd and Sn, as well as favorable support properties. Overall, the findings highlight the importance of support selection and metal incorporation in enhancing the catalytic efficiency of palladium-based catalysts for alkane dehydrogenation.