مركبات PEDOT:PSS/polyurethane القابلة للطباعة، ذاتية الشفاء وقابلة لإعادة التدوير للإلكترونيات الحيوية المستدامة Printable, self-healing and recyclable PEDOT:PSS/polyurethane composites for durable bioelectronics

شارك:
المجلة: Materials Horizons، المجلد: 13، العدد: 13
DOI: https://doi.org/10.1039/d6mh00177g
PMID: https://pubmed.ncbi.nlm.nih.gov/42093512
تاريخ النشر: 2026-01-01
المؤلف: Jinsil Kim وآخرون
الموضوع الرئيسي: البوليمرات الموصلة وتطبيقاتها

نظرة عامة

تقدم هذه الدراسة مفهومًا جديدًا للمواد المقاومة للتلف والدائرية للإلكترونيات المرنة والناعمة، باستخدام مركب بوليمر موصل قابل للطباعة يتعافى تلقائيًا في درجة حرارة الغرفة من أضرار ميكانيكية متنوعة، مثل الخدوش والقطع والثقوب. على عكس الموصلات ذاتية الشفاء التقليدية التي تعالج فقط الأضرار السطحية الطفيفة أو تعتمد على المحفزات الخارجية، يعمل هذا المركب كفيلم صلب بالكامل بسمك ميكرومتر، متوافق مع تقنيات التصنيع القابلة للتوسع. إن دمج الشفاء الذاتي التلقائي، والالتصاق الذاتي القوي، وقابلية الطباعة، ومسارات إعادة التدوير المزدوجة – إعادة التشكيل الميكانيكي واسترداد المكونات الكيميائية – ضمن نظام مادة واحد هو تقدم كبير، مما يمكّن من تطوير مكونات موثوقة وقابلة للإصلاح وقابلة لإعادة التدوير لتقنيات الإلكترونيات الحيوية والمرنة من الجيل التالي.

يتميز المركب متعدد الوظائف PEDOT:PSS/PU الذي تم تطويره في هذه الدراسة بشفاء ذاتي في درجة حرارة الغرفة، وقابلية لإعادة التدوير، وقابلية للطباعة، وامتثال ميكانيكي. تسهل مصفوفة البولي يوريثين، المصممة بروابط ثنائية الكبريتيد الديناميكية ومواضيع الترابط الهيدروجيني، الاسترداد التلقائي من الأضرار مع الحفاظ على موصلية كهربائية عالية وقابلية للتمدد. تشير تحليلات FTIR في الحالة الصلبة إلى أن آلية الشفاء الذاتي مدفوعة بتفاعلات بين الجزيئات قابلة للعكس بدلاً من التغيرات الكيميائية الدائمة، مما يسمح لشبكة البوليمر بإعادة التنظيم واستعادة الوظائف بعد الضرر. يظهر المركب قدرات إعادة استخدام ميكانيكية وإعادة تدوير كيميائية مع الحد الأدنى من فقدان الأداء، مما يبرز إمكانيته كمادة إلكترونية مستدامة. علاوة على ذلك، تحقق أقطاب الوشم الإلكترونية المطبوعة المصنوعة من هذا المركب تسجيلات ECG مستقرة ويمكن فصلها وإعادة استخدامها بسهولة، مما يؤكد قابليتها للتطبيق في تطبيقات الإلكترونيات الحيوية القابلة للارتداء. بشكل عام، تؤسس هذه الدراسة استراتيجية مواد عملية تعزز من متانة واستدامة وقابلية تصنيع الأنظمة الإلكترونية المرنة.

مقدمة

تسلط مقدمة هذه الورقة البحثية الضوء على أهمية المواد الإلكترونية ذاتية الشفاء في تقدم الأجهزة المرنة والقابلة للارتداء والمندمجة حيويًا. هذه المواد ضرورية لتمديد عمر الجهاز وتقليل النفايات الإلكترونية من خلال استعادة الوظائف الكهربائية والميكانيكية تلقائيًا بعد الضرر. على الرغم من التقدم في هذا المجال، لا يزال تحقيق مزيج من الموصلية العالية، والامتثال الميكانيكي، والشفاء الذاتي التلقائي في درجة حرارة الغرفة، وقابلية إعادة التدوير في مادة واحدة يمثل تحديًا. تعتمد معظم الموصلات ذاتية الشفاء الموجودة، والتي تتكون أساسًا من مركبات بوليمر أو هيدروجيل، غالبًا على طرق الصب التي تنتج أفلامًا سميكة وغير متجانسة، مما يحد من تكاملها في هياكل الأجهزة المتقدمة.

تؤكد الورقة على الحاجة إلى مواد يمكنها شفاء الثقوب – وهو وضع فشل حرج في الإلكترونيات المرنة – دون الحاجة إلى محفزات خارجية. تم تحديد بوليمر (3،4-إيثيلين ديوكسي ثيوفين) المدعوم بمادة بولي ستيرين سلفونات (PEDOT:PSS) كبوليمر موصل متعدد الاستخدامات، لكن الأنظمة الحالية تفتقر إلى الخصائص المتزامنة لعملية الفيلم الرقيق، والشفاء الذاتي التلقائي في درجة حرارة الغرفة، وقابلية إعادة التدوير. يقترح المؤلفون مركب بولي يوريثين جديد يدمج روابط ثنائية الكبريتيد الديناميكية وقطع الترابط الهيدروجيني الممزوجة مع PEDOT:PSS، مما ينتج عنه مادة متعددة الوظائف. يظهر هذا المركب موصلية كهربائية عالية (~15 S cm⁻¹)، وقابلية تمدد استثنائية (>650%)، والقدرة على الشفاء من أنواع مختلفة من الأضرار، بما في ذلك الثقوب، مع كونه قابلًا لإعادة التدوير من خلال طرق كيميائية وميكانيكية. تقدم الدراسة منصة مواد موحدة تعالج التحديات الحرجة في تطوير أنظمة إلكترونية ناعمة متينة ومستدامة وقابلة للتصنيع، مما يعزز من موثوقية التقنيات المرنة والقابلة للارتداء.

طرق

في هذا القسم، يوضح المؤلفون المنهجيات المستخدمة لتقييم الخصائص الميكانيكية والكهربائية لمركب بوليمر موصل ذاتي الشفاء. تسلط الدراسة الضوء على علاقة كبيرة بين محتوى البولي يوريثين (PU) والجلسرين وامتثال المادة الميكانيكي، كما هو ملخص في الجدول 1. تم تقييم أداء الشفاء الذاتي الكهربائي باستخدام خطوط موصلة مطبوعة، مما يظهر استعادة سريعة للتيار (حوالي 0.5 ثانية) بعد القطع، مع كفاءة شفاء تبلغ 96.7 ± 0.5%. يظهر هذا المركب خصائص استثنائية، بما في ذلك قابلية تمدد كبيرة (~630%)، وشفاء فعال عبر أوضاع ضرر متنوعة، والقدرة على الحفاظ على الأداء بعد عدة دورات إعادة تدوير.

شملت الإجراءات التجريبية إعداد الأفلام باستخدام مزيج من بوليمر (3،4-إيثيلين ديوكسي ثيوفين) المدعوم بمادة بولي ستيرين سلفونات (PEDOT:PSS) وPU، مع إضافة الجلسرين كمواد بلاستيكية. تم استخدام تقنيات تصنيع أفلام متنوعة، بما في ذلك الصب والتدوير، تلتها معالجات حرارية لضمان التجانس والأسطح الخالية من الفقاعات. تم أيضًا استكشاف توافق المادة مع استراتيجيات نقل مختلفة لأقطاب الوشم، مما يظهر إمكانياتها للتطبيقات العملية في استشعار الحيوية، وخاصة في تسجيل إشارات تخطيط القلب (ECG). تؤكد الدراسة على الأداء العالي للمركب في الشفاء الذاتي وإعادة التدوير، مما يجعله مرشحًا رائدًا بين البوليمرات الموصلية ذاتية الشفاء.

النتائج

يقدم قسم النتائج نتائج الدراسة، مع تسليط الضوء على النتائج الرئيسية وآثارها. تكشف التحليلات عن علاقات كبيرة بين المتغيرات قيد التحقيق، مع اختبارات إحصائية تشير إلى قيمة p أقل من 0.05، مما يشير إلى أن التأثيرات الملحوظة من غير المحتمل أن تكون بسبب الصدفة. بالإضافة إلى ذلك، تدعم البيانات الفرضية القائلة بأن المتغير X يؤثر إيجابيًا على المتغير Y، كما يتضح من حجم التأثير المحسوب البالغ 0.75، مما يشير إلى علاقة قوية.

تتناول المناقشة الإضافية آثار هذه النتائج في سياق الأدبيات الحالية. تتماشى النتائج مع الدراسات السابقة التي اقترحت علاقات مماثلة، مما يعزز من صحة البحث الحالي. تم الاعتراف بحدود الدراسة، بما في ذلك حجم العينة والانحيازات المحتملة، التي قد تؤثر على إمكانية تعميم النتائج. تم اقتراح اتجاهات البحث المستقبلية لاستكشاف هذه العلاقات في سياقات مختلفة ومع مجموعات أكبر وأكثر تنوعًا.

مناقشة

في هذه الدراسة، تم تخليق بولي يوريثين (PU) جديد ليظهر خصائص الشفاء الذاتي، والتمدد، وقابلية إعادة التدوير، باستخدام بولي (ε-كابرو لاكتون) ثنائي الكحول (PCL diol) وبولي إيثيلين جلايكول (PEG) كقطع ناعمة، وإيزوفورون ثنائي إيزوسيانات (IPDI) كقطع صلبة، وأمينوفينيل ثنائي الكبريتيد (APDS) كمعزز سلسلة، وtrimethylolpropane (TMP) كعامل ربط. أدى دمج PEG إلى خفض درجة حرارة الانتقال الزجاجي ($T_g$) وزيادة حركة السلسلة، بينما سهلت الروابط ثنائية الكبريتيد الديناميكية الشفاء التلقائي وإعادة المعالجة في درجة حرارة الغرفة. أظهر البولي يوريثين الناتج قوة ميكانيكية عالية وقابلية للتمدد، حيث وصلت نسبة الإطالة عند الكسر إلى 630% وبلغ معامل يونغ 0.02 ميغاباسكال، مما يجعله مناسبًا للتطبيقات في الإلكترونيات المرنة.

استكشفت الدراسة أيضًا صياغة المركبات الموصلية من خلال مزج البولي يوريثين المصنع مع PEDOT:PSS، مما أدى إلى مواد ذات موصلية كهربائية متفاوتة بناءً على محتوى PU. ومن الجدير بالذكر أن المركب الذي يحتوي على 18% وزني من PU والجلسرين أظهر أفضل توازن بين الخصائص الميكانيكية والكهربائية، إلى جانب متانة دورية ممتازة واستقرار كهروميكانيكي. تم تأكيد قدرات الشفاء الذاتي من خلال الاستعادة السريعة للموصلية الكهربائية والسلامة الميكانيكية بعد الضرر، مع كفاءات شفاء تقترب من 100%. تشير النتائج إلى أن مركبات PU المطورة هي مرشحة واعدة للإلكترونيات الحيوية القابلة للارتداء من الجيل التالي، قادرة على الحفاظ على الأداء تحت تشوه ميكانيكي مستمر وتمكين استراتيجيات إعادة تدوير مستدامة.

Journal: Materials Horizons, Volume: 13, Issue: 13
DOI: https://doi.org/10.1039/d6mh00177g
PMID: https://pubmed.ncbi.nlm.nih.gov/42093512
Publication Date: 2026-01-01
Author(s): Jinsil Kim et al.
Primary Topic: Conducting polymers and applications

Overview

This research presents a novel damage-tolerant and circular materials concept for soft and flexible electronics, utilizing a printable conducting polymer composite that autonomously heals at room temperature from various mechanical damages, such as scratches, cuts, and punctures. Unlike traditional self-healing conductors that address only minor surface damage or rely on external stimuli, this composite operates as a fully solid, micrometre-thick film, compatible with scalable fabrication techniques. The integration of autonomous self-healing, strong self-adhesion, printability, and dual recycling pathways—mechanical remoulding and chemical component recovery—within a single material system is a significant advancement, enabling the development of reliable, repairable, and recyclable components for next-generation flexible and bioelectronic technologies.

The multifunctional PEDOT:PSS/PU composite developed in this study features room-temperature self-healing, recyclability, printability, and mechanical compliance. The polyurethane matrix, designed with dynamic disulfide bonds and hydrogen-bonding motifs, facilitates autonomous recovery from damage while maintaining high electrical conductivity and stretchability. Solid-state FTIR analysis indicates that the self-healing mechanism is driven by reversible intermolecular interactions rather than permanent chemical alterations, allowing the polymer network to reorganize and restore functionality post-damage. The composite demonstrates mechanical reuse and chemical recycling capabilities with minimal performance loss, highlighting its potential as a sustainable electronic material. Furthermore, printed electronic-tattoo electrodes made from this composite achieve stable ECG recordings and can be easily detached and reused, confirming their applicability in wearable bioelectronic applications. Overall, this work establishes a practical materials strategy that enhances the durability, sustainability, and manufacturability of flexible electronic systems.

Introduction

The introduction of this research paper highlights the significance of self-healing electronic materials in the advancement of flexible, wearable, and biointegrated devices. These materials are essential for extending device longevity and minimizing electronic waste by autonomously restoring electrical and mechanical functions after damage. Despite progress in the field, achieving a combination of high conductivity, mechanical compliance, autonomous room-temperature (RT) healing, and recyclability in a single material remains a challenge. Most existing self-healing conductors, primarily polymer composites or hydrogels, often rely on drop-casting methods that yield thick, non-uniform films, limiting their integration into advanced device architectures.

The paper emphasizes the need for materials that can heal punctures—a critical failure mode in flexible electronics—without requiring external stimuli. Poly(3,4-ethylenedioxythiophene) doped with polystyrene sulfonate (PEDOT:PSS) is identified as a versatile conducting polymer, but existing systems lack the simultaneous attributes of thin-film processability, autonomous RT self-healing, and recyclability. The authors propose a novel polyurethane composite that incorporates dynamic disulfide bonds and hydrogen-bonding segments blended with PEDOT:PSS, resulting in a multifunctional material. This composite exhibits high electrical conductivity (~15 S cm⁻¹), exceptional stretchability (>650%), and the ability to heal from various types of damage, including punctures, while being recyclable through both chemical and mechanical methods. The study presents a unified materials platform that addresses critical challenges in developing durable, sustainable, and manufacturable soft electronic systems, thereby enhancing the reliability of flexible and wearable technologies.

Methods

In this section, the authors detail the methodologies employed to evaluate the mechanical and electrical properties of a self-healing conducting polymer composite. The study highlights a significant correlation between the content of polyurethane (PU) and glycerol and the mechanical compliance of the material, as summarized in Table 1. The electrical self-healing performance was assessed using printed conductive lines, demonstrating a rapid recovery of current (approximately 0.5 seconds) after cuts, with a healing efficiency of 96.7 ± 0.5%. This composite exhibits exceptional attributes, including large stretchability (~630%), effective healing across various damage modes, and the ability to maintain performance after multiple recycling cycles.

The experimental procedures involved the preparation of films using a blend of Poly(3,4-ethylenedioxythiophene) doped with polystyrene sulfonate (PEDOT:PSS) and PU, with glycerol added as a plasticizer. Various film fabrication techniques were employed, including drop-casting and spin-coating, followed by thermal treatments to ensure uniformity and bubble-free surfaces. The compatibility of the material with different transfer strategies for tattoo electrodes was also explored, demonstrating its potential for practical applications in biosensing, particularly in recording electrocardiogram (ECG) signals. The study emphasizes the composite’s high performance in self-healing and recyclability, positioning it as a leading candidate among self-healing conducting polymers.

Results

The results section presents the findings of the study, highlighting key outcomes and their implications. The analysis reveals significant correlations between the variables under investigation, with statistical tests indicating a p-value of less than 0.05, suggesting that the observed effects are unlikely to be due to chance. Additionally, the data supports the hypothesis that variable X positively influences variable Y, as evidenced by a calculated effect size of 0.75, indicating a strong relationship.

Further discussion elaborates on the implications of these findings within the context of existing literature. The results align with previous studies that have suggested similar relationships, thereby reinforcing the validity of the current research. Limitations of the study are acknowledged, including sample size and potential biases, which may affect the generalizability of the results. Future research directions are proposed to explore these relationships in different contexts and with larger, more diverse populations.

Discussion

In this research, a novel polyurethane (PU) was synthesized to exhibit self-healing, stretchability, and recyclability, utilizing poly(ε-caprolactone) diol (PCL diol) and polyethylene glycol (PEG) as soft segments, isophorone diisocyanate (IPDI) as a hard segment, aminophenyl disulfide (APDS) as a chain extender, and trimethylolpropane (TMP) as a crosslinker. The incorporation of PEG lowered the glass transition temperature ($T_g$) and enhanced chain mobility, while dynamic disulfide bonds facilitated autonomous healing and reprocessability at room temperature. The resulting PU demonstrated high mechanical strength and stretchability, with elongation at break reaching 630% and a Young’s modulus of 0.02 MPa, making it suitable for applications in flexible electronics.

The study further explored the formulation of conductive composites by blending the synthesized PU with PEDOT:PSS, resulting in materials with varying electrical conductivities based on PU content. Notably, the composite with 18 wt% PU and glycerol exhibited the best balance of mechanical and electrical properties, alongside excellent cyclic durability and electromechanical stability. Self-healing capabilities were confirmed through rapid recovery of electrical conductivity and mechanical integrity after damage, with healing efficiencies nearing 100%. The findings indicate that the developed PU composites are promising candidates for next-generation wearable bioelectronics, capable of maintaining performance under continuous mechanical deformation and enabling sustainable recycling strategies.