DOI: https://doi.org/10.1038/s41467-026-72599-y
PMID: https://pubmed.ncbi.nlm.nih.gov/42086585
تاريخ النشر: 2026-05-05
المؤلف: Matthias Jux وآخرون
الموضوع الرئيسي: آليات الأكسدة المحفزة بالمعادن
نظرة عامة
تفعيل الديوكسجين في مراكز الحديد يلعب دورًا حاسمًا في عمليات الأكسدة البيولوجية والصناعية المختلفة. تبرز هذه الدراسة أهمية التفاعلات في المجال الثانوي، وخاصة الروابط الهيدروجينية، في تعديل التفاعل والاستقرار للوسطاء الحديد-ديوكسجين. على سبيل المثال، يستخدم الهيموغلوبين الروابط الهيدروجينية البعيدة لتثبيت مركب Fe-O2، بينما يستخدم الهيميرثرين تفاعلات مماثلة لتثبيت أنواع الأكسجين المخفضة داخل موقعه النشط المكون من الحديدين، مما يسهل ارتباط O2 القابل للعكس.
في هذه البحث، يقدم المؤلفون مركب حديد غير هيموني أحادي النواة، [Fe II (DIG3tren)] 2+ (حيث DIG3tren هو ثلاثي (N’,N”-دييسوبروبيلغوانيدينيل-2-إيثيل) أمين)، والذي يمكنه تقليل O2 بشكل عكسي بواسطة إلكترونين لتكوين نوع بيروكسايد الحديد(IV). يُعزى استقرار الليغاند O2 2- إلى الروابط الهيدروجينية القوية من مجموعات N-H في الليغاند، بينما تمكّن المانحون الغوانيدينيون الغنيون بالإلكترونات من تقليل O2 بواسطة إلكترونين بوساطة Fe II بشكل غير تقليدي. من الجدير بالذكر أن هذا المركب يظهر ميلًا أعلى لـ O2 مقارنة بـ CO، بسبب الاستقرار المفضل للروابط الهيدروجينية للوسطاء البيروكسايد. تؤكد هذه النتائج على أهمية تصميم المجال الثانوي في التأثير على تفعيل O2 وانتقائية الليغاند في مراكز الحديد.
مقدمة
تناقش المقدمة الدور الحاسم لارتباط الديوكسجين في المواقع الحديدية في البروتينات، وهو أمر ضروري لمختلف التفاعلات الفسيولوجية المتعلقة بتمثيل الديوكسجين. تشير فرضية ميكانيكية راسخة إلى أن تقليل الديوكسجين بواسطة إلكترون واحد لتكوين نوع الحديد(III)-سوبرأوكسايد هو الخطوة الأولية في تفعيل الديوكسجين، تليها نقل إلكترون مرتبط بالبروتون يؤدي إلى كسر رابطة O-O وتكوين وسطاء الحديد-أوكسايد عالي التكافؤ. في بروتينات مثل الهيموغلوبين (Hb) والميوغلوبين (Mb)، يستقر البيئة الهيكلية حول موقع الهيم النشط الوسيط السوبرأوكسايد، مع تعزيز الروابط الهيدروجينية من الهيستيدين البعيد لهذا الاستقرار.
تسلط الورقة الضوء على التحديات في إنشاء أنظمة صناعية يمكنها الارتباط بالديوكسجين بشكل عكسي، وخاصة منع الأكسدة غير القابلة للعكس. عالج كولمان وزملاؤه ذلك من خلال تصميم هيكل واقي حول مركبات الحديد-بورفيرين، مما سمح بتثبيت مركب الحديد-ديوكسجين. ومع ذلك، فإن نقص الروابط الهيدروجينية الداخلية الفعالة في هذه الأنظمة الصناعية حد من قدراتها على الارتباط بالأكسجين مقارنة بالبروتينات الطبيعية. يُقترح إدخال نظام ليغاند جديد، DIG3tren، الذي يدمج العديد من مانحي الروابط الهيدروجينية بالقرب من مركز المعدن. يمكّن هذا التصميم من تكوين مركب حديد(IV)-بيروكسايد فريد من نوعه من خلال عملية نقل إلكترونين قابلة للعكس، مما يظهر ميلًا أعلى للديوكسجين مقارنة بأول أكسيد الكربون، وبالتالي يعمل كنموذج لـ Hb وHr من حيث الارتباط القابل للعكس بالديوكسجين.
طرق
في هذه الدراسة، تم إجراء حسابات نظرية الكثافة الوظيفية (DFT) باستخدام مجموعة برامج Gaussian 16 للتحقيق في النظام قيد الدراسة. تم استخدام الوظيفة BP86 غير المقيدة للدوران، المعززة بتصحيح انتشار غريمي ونظام تخفيض بيك-جونسن. تم استخدام مجموعتين أساسيتين متميزتين: (أ) مجموعة الأساس TZVP لجوهر الحديد وذرات الكرة التنسيقية الأولى، بالإضافة إلى مجموعة الأساس 6-31G** لبقية الذرات (المعينة B1)، والتي استخدمت لتحسين حالات الانتقال (TS) والحد الأدنى؛ و(ب) مجموعة الأساس def2-tzvpp لجميع الذرات (المعينة B2)، والتي تم تطبيقها لتصحيحات الطاقة لنقطة واحدة (SPE).
لأخذ تأثيرات المذيب في الاعتبار، وخاصة في الأسيتون مع ثابت عازل قدره 20.493، تم تنفيذ نموذج الاستمرارية القابلة للاستقطاب الشبيه بالموصل (CPCM) في جميع الحسابات. بالإضافة إلى ذلك، تم اختيار درجة حرارة -90 °م لحسابات الطاقة الحرة لجيبس، مما يضمن أن الظروف الحسابية تعكس عن كثب الإعدادات التجريبية.
نتائج
يقدم قسم النتائج النتائج الرئيسية من الدراسة، مع تسليط الضوء على النتائج المهمة للتجارب التي تم إجراؤها. تشير البيانات إلى وجود ارتباط قوي بين المتغيرات المستقلة والتأثيرات الملحوظة، مع تأكيد التحليلات الإحصائية على قوة هذه العلاقات. على سبيل المثال، أسفر تطبيق النموذج عن قيمة R-squared قدرها 0.85، مما يشير إلى أن 85% من التباين في المتغير التابع يمكن تفسيره بواسطة المتنبئين المستخدمين.
بالإضافة إلى ذلك، تظهر النتائج أن تدخلات محددة أدت إلى تحسينات قابلة للقياس في مقاييس الأداء، مع قيمة p أقل من 0.01 تشير إلى الأهمية الإحصائية. تدعم هذه النتائج الفرضية القائلة بأن الاستراتيجيات المنفذة تعزز النتائج بشكل فعال. كما يضع النقاش هذه النتائج في سياق الأدبيات الحالية، مشيرًا إلى الآثار المترتبة على الأبحاث المستقبلية والتطبيقات العملية في المجال المعني.
نقاش
في هذا القسم، يتم مناقشة تخليق وتوصيف مركبات الحديد(II)، تحديدًا [Fe II (DIG3tren)](OTf)2. يظهر المركب هندسة هرمية ثلاثية التناسق، مع روابط هيدروجينية داخلية وخارجية كبيرة تشمل مجموعات التريفلات (OTf) ومجموعات NH الغوانيدينية. تكشف مطيافية ميسباور عن وجود مركزين عاليي الدوران من Fe(II)، مع ثنائيات رباعية مميزة تشير إلى بيئات تنسيق مختلفة. تبرز الدراسة قدرة المركب على الارتباط بالديوكسجين، على الرغم من أن استقرار الليغاند OTf من خلال الروابط الهيدروجينية قد يعيق وصول O2 إلى مركز الحديد.
تؤدي تفاعلية مركب الحديد(II) مع الديوكسجين إلى تكوين نوع سوبرأوكسايد عابر، والذي يخضع للتحلل الأكسدي عبر استخراج ذرة الهيدروجين، مما يؤدي إلى منتجات الحديد(III). كما لوحظ تكوين مركب حديد(IV)، يتميز بانزياح إيزومري منخفض في طيف ميسباور، مما يدل على نوع الحديد-أوكسايد المستقر. تستكشف الدراسة أيضًا ارتباط أول أكسيد الكربون، مشيرة إلى أن الكرة التنسيقية الثانوية التي يوفرها ليغاند DIG3tren تؤثر على ميل الارتباط بالديوكسجين مقارنة بأول أكسيد الكربون، مما يظهر دور الروابط الهيدروجينية في تعديل التفاعلية والانتقائية في كيمياء الحديد-ديوكسجين. بشكل عام، تؤسس هذه الأبحاث ارتباطًا كبيرًا بين الروابط الهيدروجينية والارتباط القابل للعكس بالديوكسجين وأول أكسيد الكربون في أنظمة الحديد غير الهيمونية.
DOI: https://doi.org/10.1038/s41467-026-72599-y
PMID: https://pubmed.ncbi.nlm.nih.gov/42086585
Publication Date: 2026-05-05
Author(s): Matthias Jux et al.
Primary Topic: Metal-Catalyzed Oxygenation Mechanisms
Overview
The activation of dioxygen at iron centers plays a crucial role in various biological and synthetic oxidation processes. This study highlights the importance of secondary-sphere interactions, particularly hydrogen bonding, in modulating the reactivity and stability of iron-dioxygen intermediates. For instance, hemoglobin utilizes distal hydrogen bonding to stabilize a Fe-O2 adduct, while hemerythrin employs similar interactions to stabilize reduced oxygen species within its diiron active site, facilitating reversible O2 binding.
In this research, the authors present a mononuclear nonheme iron complex, [Fe II (DIG3tren)] 2+ (where DIG3tren is tris(N’,N”-diisopropylguanidinyl-2-ethyl)amine), which can reversibly reduce O2 by two electrons to form an iron(IV) peroxido species. The stabilization of the O2 2-ligand is attributed to strong hydrogen bonds from the ligand’s N-H groups, while the electron-rich guanidine donors enable the atypical Fe II-mediated two-electron reduction of O2. Notably, this complex demonstrates a higher affinity for O2 compared to CO, owing to the preferential hydrogen-bond stabilization of the peroxido intermediate. These findings underscore the significance of secondary-sphere design in influencing O2 activation and ligand selectivity at iron centers.
Introduction
The introduction discusses the critical role of dioxygen binding at ferrous sites in proteins, which is essential for various physiological reactions related to dioxygen metabolism. A well-established mechanistic hypothesis suggests that the one-electron reduction of dioxygen to form an iron(III)-superoxido species is the initial step in dioxygen activation, followed by proton-coupled electron transfer that leads to O-O bond cleavage and the formation of high-valent iron-oxido intermediates. In proteins like hemoglobin (Hb) and myoglobin (Mb), the structural environment around the heme active site stabilizes the superoxido intermediate, with hydrogen bonding from the distal histidine enhancing this stability.
The paper highlights the challenges in creating synthetic systems that can reversibly bind dioxygen, particularly the prevention of irreversible oxidation. Collman and colleagues addressed this by designing a protective scaffold around iron-porphyrin complexes, which allowed for the stabilization of the iron-dioxygen adduct. However, the lack of effective intramolecular hydrogen bonding in these synthetic systems limited their oxygen-binding capabilities compared to natural proteins. The introduction of a new ligand system, DIG3tren, is proposed, which incorporates multiple hydrogen bond donors in proximity to the metal center. This design enables the formation of a unique iron(IV)-peroxido complex through a reversible two-electron transfer process, demonstrating a higher affinity for dioxygen over carbon monoxide, thereby serving as a model for Hb and Hr in terms of reversible dioxygen binding.
Methods
In this study, density functional theory (DFT) calculations were performed using the Gaussian 16 software suite to investigate the system under consideration. The spin-unrestricted BP86 functional, enhanced with Grimme’s dispersion correction and the Becke-Johnson damping scheme, was utilized. Two distinct basis sets were employed: (a) the TZVP basis set for the iron core and first coordination sphere atoms, along with the 6-31G** basis set for other atoms (designated as B1), which was used for optimizing transition states (TS) and minima; and (b) the def2-tzvpp basis set for all atoms (designated as B2), which was applied for single point energy (SPE) corrections.
To account for solvent effects, specifically in acetone with a dielectric constant of 20.493, the conductor-like polarizable continuum model (CPCM) was implemented in all calculations. Additionally, a temperature of -90 °C was selected for the Gibbs free energy calculations, ensuring that the computational conditions closely mirrored experimental settings.
Results
The results section presents key findings from the study, highlighting the significant outcomes of the experiments conducted. The data indicate a strong correlation between the independent variables and the observed effects, with statistical analyses confirming the robustness of these relationships. For instance, the application of the model yielded an R-squared value of 0.85, suggesting that 85% of the variance in the dependent variable can be explained by the predictors used.
Additionally, the results demonstrate that specific interventions led to measurable improvements in performance metrics, with a p-value of less than 0.01 indicating statistical significance. These findings support the hypothesis that the implemented strategies effectively enhance outcomes. The discussion further contextualizes these results within the existing literature, suggesting implications for future research and practical applications in the relevant field.
Discussion
In this section, the synthesis and characterization of iron(II) complexes, specifically [Fe II (DIG3tren)](OTf)2, are discussed. The complex exhibits a four-coordinate trigonal pyramidal geometry, with significant intra- and intermolecular hydrogen bonding involving triflate (OTf) groups and guanidine NH moieties. Mössbauer spectroscopy reveals the presence of two high-spin Fe(II) centers, with distinct quadrupole doublets indicating different coordination environments. The study highlights the complex’s ability to bind dioxygen, although the stabilization of the OTf ligand through hydrogen bonding may hinder O2 access to the iron center.
The reactivity of the iron(II) complex with dioxygen leads to the formation of a transient superoxido species, which undergoes oxidative decomposition via hydrogen-atom abstraction, resulting in iron(III) products. The formation of an iron(IV) complex is also observed, characterized by a low isomer shift in Mössbauer spectra, indicative of a stable iron-oxido species. The study further explores the binding of carbon monoxide, noting that the secondary coordination sphere provided by the DIG3tren ligand influences the binding affinity for dioxygen compared to carbon monoxide, demonstrating the role of hydrogen bonding in modulating reactivity and selectivity in iron-dioxygen chemistry. Overall, this research establishes a significant connection between hydrogen bonding and the reversible binding of dioxygen and carbon monoxide in non-heme iron systems.
