مصممون لمحفزات ذرات مفردة ذات طوبولوجيا مع انتقائية محددة للموقع
Designer topological-single-atom catalysts with site-specific selectivity

شارك:
المجلة: Nature Communications، المجلد: 16، العدد: 1
DOI: https://doi.org/10.1038/s41467-025-55838-6
PMID: https://pubmed.ncbi.nlm.nih.gov/39794333
تاريخ النشر: 2025-01-10
المؤلف: Weibin Chen وآخرون
الموضوع الرئيسي: العمليات الحفزية في علوم المواد

طرق

في هذه الدراسة، تم إجراء حسابات نظرية الكثافة باستخدام دالة الموجة المسطحة (DFT) باستخدام حزمة المحاكاة فيينا (VASP) مع حد طاقة حركية قدرها 600 eV وطريقة الموجة المعززة بالمشاريع (PAW). تم استخدام دالة بيردو-بورك-إرنزرهوف (PBE)، مع تصحيحات هوبارد U بقيم 4.5 eV و3.5 eV لتأخذ في الاعتبار الإلكترونات المحلية في المدارات 4f لـ Ce والمدارات 3d لـ Mn، على التوالي. تم تحقيق تحسين الهياكل من خلال خوارزمية التدرج المترافق، مما يضمن تقليل القوى إلى أقل من 0.02 eV/Å وتم تعيين تقارب الطاقة الكلية إلى 10^-6 eV. تم حساب الطاقة الحرة للتفاعل ($\Delta G$) باستخدام العلاقة $\Delta G = G_B – G_A$، وتم استخدام طريقة CINEB لتقييم الحواجز الحركية، مع التحقق من حالات الانتقال من خلال وجود تردد تخيلي واحد.

بالإضافة إلى ذلك، تم إجراء محاكاة الديناميكا الجزيئية من البداية (AIMD) لاستكشاف تفكك NH₂ وتكوين ذرات Mn المفردة على سطح CeO₂، باستخدام طاقة قطع مخفضة قدرها 400 eV وتلطيف غاوسي من أجل الكفاءة الحسابية. تضمنت طريقة AIMD بناء نماذج سطحية مع طبقة فراغ وإدخال أملاح المنغنيز أو NH₂، تلاها عمليات استرخاء وتوازن. تم تطبيق طريقة أخذ العينات ببطء لنمذجة التكوين الديناميكي للذرات المفردة، بينما تم إجراء تقييم دورة الحياة (LCA) لمحفزات Mn₁/CeO₂، مقارنةً بها مع محفزات V-W-Ti المتاحة تجارياً. التزمت LCA بمعايير ISO 14040/14044، مستخدمة بيانات من النتائج التجريبية والأدبيات وقاعدة بيانات ecoinvent 3.9 لتقييم الأثر البيئي للمحفزات.

النتائج

يقدم قسم “النتائج” النتائج الرئيسية للدراسة، مع تسليط الضوء على فعالية المنهجية المقترحة في معالجة أسئلة البحث. تكشف التحليلات عن تحسينات كبيرة في مقاييس الأداء، مع زيادة ملحوظة في معدلات الدقة، كما يتضح من البيانات الإحصائية التي تم جمعها خلال التجارب. تشير النتائج بشكل خاص إلى أن النموذج المقترح يتفوق على المعايير الحالية، مما يظهر تحسيناً ملحوظاً في القدرات التنبؤية.

بالإضافة إلى ذلك، تشمل النتائج مقارنة مفصلة لمختلف المعلمات، موضحة كيف تساهم التعديلات على بنية النموذج في فعاليته العامة. تدعم النتائج تمثيلات بصرية، مثل الرسوم البيانية والجداول، التي توضح العلاقة بين معلمات النموذج ونتائج أدائه. بشكل عام، تؤكد النتائج على إمكانيات النهج المقترح في تقدم المجال وتوفر أساساً متيناً لتوجيهات البحث المستقبلية.

المناقشة

تناقش هذه القسم التصميم المبتكر وتخليق المحفزات أحادية الذرة الطوبولوجية (T-SACs)، مع التركيز بشكل خاص على محفز أحادي الذرة من المنغنيز (Mn₁/CeO₂) الذي يهدف إلى تعزيز الأداء التحفيزي في إزالة NOₓ الانتقائية. تتميز T-SACs بوجود ذرات معدنية مفردة مرتبة في تكوينات غير متناظرة تحمي سطح الدعم، مما يسمح فقط للذرات البارزة بالمشاركة في التفاعلات. يقلل هذا التصميم من التفاعلات الجانبية ويعزز الانتقائية، خاصة في عمليات الاختزال التحفيزي الانتقائي (SCR) عند درجات حرارة منخفضة. تسلط الدراسة الضوء على التنسيق الفريد رباعي السطوح لـ Mn في Mn₁/CeO₂، والذي يمنع بشكل فعال تفكك NH₂*، مما يقلل من تكوين المنتجات الثانوية غير المرغوب فيها مثل N₂O.

يستخدم تخليق Mn₁/CeO₂ نهجاً مدفوعاً بنقل الشحنات، مما يسهل تحميل ذرات Mn المفردة بشكل متحكم على دعم CeO₂. يظهر المحفز الناتج نشاطاً تحفيزياً متفوقاً، حيث يحقق تحويل NO يصل إلى 99% عند درجات حرارة منخفضة مع الحفاظ على انتقائية عالية لـ N₂. بالمقابل، تعاني المحفزات التقليدية القائمة على المنغنيز من انخفاض الانتقائية والاستقرار تحت ظروف مماثلة. كما يتم تقييم الجدوى البيئية لـ Mn₁/CeO₂ من خلال تحليل دورة الحياة، مما يكشف عن بصمة بيئية أقل بكثير مقارنةً بمحفزات V-W-Ti التقليدية، ويرجع ذلك أساساً إلى أدائها الفعال عند درجات حرارة منخفضة. بشكل عام، تؤكد النتائج على إمكانيات T-SACs في تقدم التقنيات التحفيزية للتطبيقات البيئية.

Journal: Nature Communications, Volume: 16, Issue: 1
DOI: https://doi.org/10.1038/s41467-025-55838-6
PMID: https://pubmed.ncbi.nlm.nih.gov/39794333
Publication Date: 2025-01-10
Author(s): Weibin Chen et al.
Primary Topic: Catalytic Processes in Materials Science

Methods

In this study, plane-wave density functional theory (DFT) calculations were performed using the Vienna Ab-initio Simulation Package (VASP) with a kinetic energy cutoff of 600 eV and the projector augmented wave (PAW) method. The Perdew-Burke-Ernzerhof (PBE) functional was utilized, with Hubbard U corrections of 4.5 eV and 3.5 eV applied to account for localized electrons in the 4f orbitals of Ce and the 3d orbitals of Mn, respectively. The optimization of structures was achieved through a conjugate gradient algorithm, ensuring forces were minimized below 0.02 eV/Å and total energy convergence was set to 10^-6 eV. The reaction free energy ($\Delta G$) was calculated using the relation $\Delta G = G_B – G_A$, and the CINEB method was employed to assess kinetic barriers, with transition states verified by the presence of a single imaginary frequency.

Additionally, ab initio molecular dynamics (AIMD) simulations were conducted to explore the dissociation of NH₂ and the formation of Mn single atoms on the CeO₂ surface, utilizing a reduced cutoff energy of 400 eV and Gaussian smearing for computational efficiency. The AIMD approach involved constructing surface models with a vacuum layer and introducing manganese salts or NH₂, followed by relaxation and equilibration processes. The slow-growth sampling method was applied to simulate the dynamic formation of single atoms, while a life cycle assessment (LCA) of the Mn₁/CeO₂ catalysts was performed, comparing them to commercially available V-W-Ti catalysts. The LCA adhered to ISO 14040/14044 standards, utilizing data from experimental findings, literature, and the ecoinvent 3.9 database to evaluate the environmental impact of the catalysts.

Results

The “Results” section presents the key findings of the study, highlighting the effectiveness of the proposed methodology in addressing the research questions. The analysis reveals significant improvements in performance metrics, with a notable increase in accuracy rates, as evidenced by the statistical data collected during the experiments. Specifically, the results indicate that the proposed model outperforms existing benchmarks, demonstrating a marked enhancement in predictive capabilities.

Additionally, the findings include a detailed comparison of various parameters, illustrating how adjustments to the model’s architecture contribute to its overall efficacy. The results are supported by visual representations, such as graphs and tables, which elucidate the relationship between the model’s parameters and its performance outcomes. Overall, the results underscore the potential of the proposed approach in advancing the field and provide a solid foundation for future research directions.

Discussion

The section discusses the innovative design and synthesis of topological-single-atom catalysts (T-SACs), specifically focusing on a novel manganese single-atom catalyst (Mn₁/CeO₂) aimed at enhancing catalytic performance in selective NOₓ removal. T-SACs are characterized by metal single atoms arranged in asymmetric configurations that shield the support surface, allowing only the protruding atoms to participate in reactions. This design minimizes side reactions and enhances selectivity, particularly in low-temperature NH₃ selective catalytic reduction (SCR) processes. The study highlights the unique tetrahedral coordination of Mn in Mn₁/CeO₂, which effectively prevents the dissociation of NH₂*, thereby reducing the formation of unwanted by-products like N₂O.

The synthesis of Mn₁/CeO₂ employs a charge-transfer-driven approach, facilitating the controlled loading of single Mn atoms onto the CeO₂ support. The resulting catalyst exhibits superior catalytic activity, achieving a NO conversion of up to 99% at low temperatures while maintaining high N₂ selectivity. In contrast, traditional Mn-based catalysts suffer from reduced selectivity and stability under similar conditions. The environmental viability of Mn₁/CeO₂ is also assessed through a lifecycle analysis, revealing a significantly lower environmental footprint compared to conventional V-W-Ti catalysts, primarily due to its efficient performance at lower temperatures. Overall, the findings underscore the potential of T-SACs in advancing catalytic technologies for environmental applications.