DOI: https://doi.org/10.1080/00295639.2026.2636351
تاريخ النشر: 2026-04-01
المؤلف: Theophile Bonnet وآخرون
الموضوع الرئيسي: فيزياء وهندسة المفاعلات النووية
نظرة عامة
في هذه الدراسة، نقدم نهجًا جديدًا يستخدم طريقة الكثافة الافتراضية مع طريقة الفوضى متعددة الحدود العامة المتطفلة لنمذجة تأثير الاضطرابات الهندسية الموحدة بفعالية في محاكاة تكرار الطاقة المستمرة باستخدام مونت كارلو. يسمح لنا الخوارزم المقترح بتقدير صريح لعامل التكاثر كدالة لسعة الاضطرابات الهندسية، مما يظهر دقة في التنبؤ بتغيرات التفاعل بسبب التمددات أو الانتفاخات الموحدة عبر مجموعة واسعة من التشوهات ضمن محاكاة واحدة. يظهر النموذج المخفض تقاربًا سريعًا في ترتيب متعدد الحدود، ويعمل بشكل مستقل عن معرفة التدفق المرافق، ويتجنب الآثار غير المباشرة.
تشير النتائج إلى أن طريقتنا يمكن دمجها بسلاسة في أكواد مونت كارلو الحالية مع تعديلات طفيفة، مع ضمان توزيع موحد وثابت للمعلمات غير المؤكدة في بداية كل جيل. تشمل اتجاهات البحث المستقبلية توسيع الطريقة لاستيعاب الاضطرابات غير الموحدة والتحقيق في تأثيرات خوارزميات التحكم في السكان على توزيعات المعلمات. بالإضافة إلى ذلك، تظهر طريقتنا وعدًا في تقدير المساهمات من الرتبة الأعلى في التفاعل، خاصة في السيناريوهات التي تتضمن اضطرابات متزامنة للحدود الداخلية وكثافات النظائر. بشكل عام، تضع هذه العمل الأساس لاستكشاف مزيد من نظرية الاضطراب الهندسي في محاكيات مونت كارلو، مع تطبيقات محتملة في البحث عن الحرج والتغيرات الهندسية المعتمدة على الزمن.
مقدمة
تناقش مقدمة الورقة أهمية تحليل الاضطرابات الصغيرة في المفاعلات النووية، مع التركيز بشكل خاص على الاضطرابات الهندسية والحدودية. كانت الطرق التقليدية لمعالجة هذه الاضطرابات تعتمد إلى حد كبير على الحتمية، مستندة إلى نظرية الاضطراب الحدودي المعتمدة ونظرية الاضطراب الهندسي، حيث تم توسيع الأخيرة إلى أوامر تعسفية. ومع ذلك، كانت تحليل الاضطرابات الحدودية الداخلية محدودًا بالأساليب من الدرجة الأولى. تسلط الورقة الضوء على التحديات التي تواجه تطبيق محاكيات مونت كارلو على الاضطرابات الهندسية وتقدم مفهوم نظرية الكثافة الافتراضية، التي تسمح بتمثيل التغيرات الهندسية الموحدة كاضطرابات في مقاطع العرض. أظهرت التطورات الأخيرة في هذا المجال تعادل نظرية الكثافة الافتراضية ونظرية الاضطراب الحدودي، مما يسهل تقدير التغيرات في عامل التكاثر الفعال ($k_{eff}$) بسبب التعديلات الهندسية.
يقترح المؤلفون توسيع تطبيق طرق الفوضى متعددة الحدود العامة المتطفلة (gPC) لتحليل هذه الاضطرابات، خاصة في سياق نظرية الكثافة الافتراضية. يهدف هذا النهج إلى تبسيط تقدير $k_{eff}$ كدالة لحجم النظام دون التأثير مباشرة على المعلمات الهندسية. توضح الورقة هيكل العمل، مشيرة إلى أن الأقسام اللاحقة ستوفر خلفية نظرية حول gPC ونظرية الكثافة الافتراضية، تليها دراسة دقة وكفاءة الطريقة. من المتوقع أن تعزز الطريقة المقترحة تحليل كل من الاضطرابات الموحدة وغير الموحدة في أنظمة المفاعلات النووية.
النتائج
في هذا القسم، يقدم المؤلفون نتائج عددية توضح فعالية طريقتهم المطبقة على أنظمة مرجعية متنوعة، بما في ذلك صندوق وقود بسيط، ومشكلة عاكس، وتجميع وقود MOX أكثر تعقيدًا استنادًا إلى مرجع C5G7. أظهرت الاختبارات الأولية على صندوق الوقود، الذي كانت أبعاده 80 سم × 80 سم × 80 سم، أن التوسع من الدرجة الثانية في متعددات الحدود ليجاندر كان كافيًا لتوافق نتائج الفوضى متعددة الحدود العامة (gPC) مع المحاكيات المرجعية ضمن عدم اليقين الإحصائي. تم الإبلاغ عن عوامل التكاثر للأنظمة بدون اضطراب، حيث أعطى الصندوق $k_{\text{ref}} = 0.96017 \pm 6 \text{ pcm}$، والصندوق المنعكس $k_{\text{ref}} = 1.06617 \pm 10 \text{ pcm}$، والتجميع $k_{\text{ref}} = 1.14069 \pm 9 \text{ pcm}$.
أشارت النتائج لأنظمة الصندوق إلى أن نموذج gPC قد التقط بدقة تغيرات التفاعل بسبب التمددات الموحدة والاضطرابات المتساوية، مع أخطاء نسبية تظل باستمرار تحت 1% مقارنة بنتائج الاضطراب المباشر. تم إثبات تقارب نموذج gPC، مما يظهر أن زيادة حجم السكان الأولي حسنت دقة معاملات فوضى الحدود. في التجميع الأكثر تعقيدًا C5G7، أعادت الطريقة إنتاج تغييرات صغيرة في التفاعل بسبب الاضطرابات الهندسية بفعالية، مع بقاء الأخطاء النسبية بين نتائج الكثافة الافتراضية والاضطراب المباشر أقل من 3%. استكشف المؤلفون أيضًا الاضطراب المتزامن لكثافات النظائر البورونية والهندسة، محققين توافقًا جيدًا مع النتائج المرجعية ومبرزين قدرة النموذج على حساب المصطلحات المتقاطعة التي تكافح نظرية الاضطراب التقليدية لالتقاطها. بشكل عام، تؤكد النتائج على قوة ودقة الطريقة المقترحة عبر سيناريوهات مختلفة.
مناقشة
في هذا القسم، يناقش المؤلفون صياغة وتطبيق معادلة بولتزمان غير المؤكدة لنقل النيوترونات في وسط يتميز بمعلمات غير مؤكدة. يتم التعبير عن المعادلة في فضاء مرحلة موسع، يتضمن متجهًا من المعلمات غير المؤكدة \(X\). يتم تعريف مشغل الفقد الصافي \(L\) ومشغل الانشطار \(F\)، مما يؤدي إلى مشكلة القيم الذاتية التي تسمح بحساب عامل التكاثر الفعال \(k_{\text{eff}}(X)\)، الذي يحدد نسبة إنتاج النيوترونات إلى الفقد. يستخدم المؤلفون طريقة تكرار القوة لمونت كارلو لحل هذه المشكلة، متكررين عبر أجيال من النيوترونات الانشطارية للتقارب نحو حالة ثابتة.
يقدم القسم أيضًا الفوضى متعددة الحدود العامة (gPC) كتقنية لتقريب الدوال بناءً على قواعد متعددة الحدود المتعامدة، مما يساعد في بناء نماذج مخفضة لعامل التكاثر الفعال \(k_{\text{eff}}(X)\). يوضح المؤلفون عملية تقدير معاملات gPC من خلال محاكيات مونت كارلو، مؤكدين على أهمية الحفاظ على التوزيع الموحد للمعلمات غير المؤكدة عبر الأجيال. يقترحون طريقة أخذ عينات مهمة لضمان بقاء توزيع المعلمات غير المؤكدة ثابتًا، مما يعزز موثوقية التقديرات الإحصائية المستمدة من محاكيات مونت كارلو. يختتم المؤلفون بتحديد الخطوات الخوارزمية لتنفيذ نهجهم، مشددين على الحاجة إلى تكامل دقيق وفحوصات التقارب لضمان نتائج دقيقة في سياق تقدير عدم اليقين في نقل النيوترونات.
DOI: https://doi.org/10.1080/00295639.2026.2636351
Publication Date: 2026-04-01
Author(s): Theophile Bonnet et al.
Primary Topic: Nuclear reactor physics and engineering
Overview
In this study, we present a novel approach utilizing the virtual density method combined with the intrusive generalized polynomial chaos method to effectively model the impact of uniform geometrical perturbations in continuous-energy Monte Carlo power iteration simulations. Our proposed algorithm allows for the explicit estimation of the multiplication factor as a function of the amplitude of geometrical perturbations, demonstrating accuracy in predicting reactivity changes due to uniform expansions or swellings across a wide range of deformations within a single simulation. The reduced model exhibits rapid convergence in polynomial order, operates independently of adjoint flux knowledge, and avoids indirect effects.
The findings indicate that our method can be seamlessly integrated into existing k-eigenvalue Monte Carlo codes with minimal modifications, while ensuring uniform and stationary distributions of uncertain parameters at the start of each generation. Future research directions include extending the method to accommodate non-uniform perturbations and investigating the effects of population control algorithms on parameter distributions. Additionally, our approach shows promise in estimating higher-order contributions to reactivity, particularly in scenarios involving simultaneous perturbations of internal boundaries and nuclide densities. Overall, this work lays the groundwork for further exploration of geometrical perturbation theory in Monte Carlo simulations, with potential applications in criticality searches and time-dependent geometrical changes.
Introduction
The introduction of the paper discusses the significance of analyzing small perturbations in nuclear reactors, particularly focusing on geometrical and boundary perturbations. Traditional methods for addressing these perturbations have been largely deterministic, relying on established boundary perturbation theory and geometry perturbation theory, with the latter having been extended to arbitrary orders. However, the analysis of interior boundary perturbations has been limited to first-order methodologies. The paper highlights the challenges of applying Monte Carlo simulations to geometrical perturbations and introduces the concept of virtual density theory, which allows for the representation of uniform geometrical changes as cross-section perturbations. Recent advancements in this area have shown the equivalence of virtual density theory and boundary perturbation theory, facilitating the estimation of effective multiplication factor ($k_{eff}$) changes due to geometrical modifications.
The authors propose to extend the application of intrusive generalized polynomial chaos (gPC) methods to analyze these perturbations, particularly in the context of virtual density theory. This approach aims to simplify the estimation of $k_{eff}$ as a function of system size without directly perturbing geometrical parameters. The paper outlines the structure of the work, indicating that subsequent sections will provide theoretical background on gPC and virtual density theory, followed by an investigation of the method’s accuracy and efficiency. The proposed method is expected to enhance the analysis of both uniform and non-uniform perturbations in nuclear reactor systems.
Results
In this section, the authors present numerical results demonstrating the effectiveness of their method applied to various benchmark systems, including a simple fuel box, a reflector problem, and a more complex MOX fuel assembly based on the C5G7 benchmark. The initial tests on the fuel box, which had dimensions of 80 cm × 80 cm × 80 cm, showed that a second-order expansion in Legendre polynomials was sufficient for the generalized Polynomial Chaos (gPC) results to align with reference simulations within statistical uncertainty. The multiplication factors for the systems without perturbation were reported, with the box yielding $k_{\text{ref}} = 0.96017 \pm 6 \text{ pcm}$, the reflected box $k_{\text{ref}} = 1.06617 \pm 10 \text{ pcm}$, and the assembly $k_{\text{ref}} = 1.14069 \pm 9 \text{ pcm}$.
The results for the box systems indicated that the gPC model accurately captured reactivity changes due to uniform expansions and isotropic perturbations, with relative errors consistently under 1% compared to direct perturbation results. The convergence of the gPC model was demonstrated, showing that increasing the initial population size improved the accuracy of the polynomial chaos coefficients. In the more complex C5G7 assembly, the method effectively reproduced small changes in reactivity due to geometrical perturbations, with relative errors between virtual density and direct perturbation results remaining below 3%. The authors also explored the simultaneous perturbation of boron isotopic densities and geometry, achieving good agreement with reference results and highlighting the model’s capability to account for cross-terms that traditional perturbation theory struggles to capture. Overall, the findings underscore the robustness and accuracy of the proposed method across different scenarios.
Discussion
In this section, the authors discuss the formulation and application of the uncertain Boltzmann equation for neutron transport in a medium characterized by uncertain parameters. The equation is expressed in an extended phase space, incorporating a vector of uncertain parameters \(X\). The net loss operator \(L\) and the fission operator \(F\) are defined, leading to an eigenvalue problem that allows for the calculation of the effective multiplication factor \(k_{\text{eff}}(X)\), which quantifies the ratio of neutron production to losses. The authors employ a Monte Carlo power iteration method to solve this eigenvalue problem, iterating through generations of fission neutrons to converge towards a stationary state.
The section further introduces Generalized Polynomial Chaos (gPC) as a technique for approximating functions based on orthonormal polynomial bases, which aids in constructing reduced models for the effective multiplication factor \(k_{\text{eff}}(X)\). The authors detail the process of estimating gPC coefficients through Monte Carlo simulations, emphasizing the importance of maintaining uniformity in the distribution of uncertain parameters across generations. They propose an importance sampling method to ensure that the distribution of uncertain parameters remains stationary, thereby enhancing the reliability of the statistical estimates derived from the Monte Carlo simulations. The authors conclude by outlining the algorithmic steps for implementing their approach, highlighting the need for careful integration and convergence checks to ensure accurate results in the context of uncertainty quantification in neutron transport.
