معايرة المعدات الطبية الحيوية وفقًا لمعيار ISO/IEC 17025: الأطر والأساليب وتقييم عدم اليقين في القياس ISO/IEC 17025-Compliant Calibration of Biomedical Equipment: Frameworks, Methods, and Measurement Uncertainty Assessment

شارك:
المجلة: International Journal of Research and Innovation in Applied Science، المجلد: 11، العدد: 5
DOI: https://doi.org/10.51584/ijrias.2026.11050086
تاريخ النشر: 2026-06-01
المؤلف: Moktar Hossain وآخرون
الموضوع الرئيسي: الجودة والسلامة في الرعاية الصحية

نظرة عامة

تقدم هذه القسم نظرة شاملة عن الدور الحاسم الذي تلعبه المعدات الطبية الحيوية في الرعاية الصحية الحديثة، مع التأكيد على أهميتها في التشخيص والعلاج ومراقبة المرضى. يبرز ضرورة المعايرة والتأكيد المنتظم للأجهزة السريرية لضمان موثوقيتها وسلامتها ودقتها، حيث يمكن أن تؤدي الأخطاء إلى تشخيص خاطئ وزيادة خطر المرضى. يتم تقديم معيار ISO/IEC 17025 كإطار حيوي للحفاظ على الكفاءة الفنية لمختبرات المعايرة، وضمان تتبع النتائج، وتعزيز الثقة في نتائج المعايرة. تستعرض الورقة ممارسات المعايرة المختلفة للأجهزة الطبية الحيوية، مع معالجة جوانب مثل أنظمة الجودة، والتتبع المترولوجي، وكفاءة الأفراد، بينما تناقش أيضًا التحديات التي تواجهها مرافق الرعاية الصحية في البلدان النامية.

في الخاتمة، تطبق المراجعة متطلبات ISO/IEC 17025:2017 على دورة حياة المعايرة للمعدات الطبية الحيوية، متميزة بتقديم نموذج ميزانية عدم اليقين الموحد المصمم للمعلمات الطبية الحيوية. تؤكد على الفجوات الهيكلية بين البلدان ذات الدخل المرتفع والبلدان ذات الموارد المنخفضة، مشيرة إلى أن نقص التتبع الوطني والأفراد المدربين يزيد من تفاقم مشكلات المعايرة. تجادل الورقة بأن المعايرة المنهجية ضمن إطار معتمد ضرورية لتعزيز سلامة المرضى ونتائج الرعاية الصحية، مشبهة إياها بأهمية الأدوات الجراحية المعقمة. علاوة على ذلك، تقترح أن يتم استكشاف الجدوى الاقتصادية للمعايرة عن بُعد، خاصةً للأجهزة ذات الحدة المنخفضة، لتحسين الكفاءة التشغيلية في بيئات الرعاية الصحية.

مقدمة

تستعرض المقدمة الدور الحاسم للمعدات الطبية الحيوية في الرعاية الصحية، بما في ذلك الأجهزة مثل مخططات القلب، وأجهزة التنفس، والأدوات الجراحية، التي تعتبر ضرورية لسلامة المرضى واتخاذ القرارات السريرية الفعالة. تبرز المشكلة الكبيرة المتعلقة بعطل المعدات، خاصةً في البلدان ذات الدخل المنخفض والمتوسط، حيث تقدر منظمة الصحة العالمية (WHO) أن ما يصل إلى 50% من الأجهزة الطبية خارج الخدمة أو تُستخدم بشكل خاطئ بسبب نقص المعايرة والصيانة. تُعرف المعايرة بأنها العملية التي تحدد العلاقة بين قراءات الأجهزة والمعايير المرجعية، مما يضمن أن تعمل الأجهزة ضمن مواصفات الشركة المصنعة والتسامحات المقبولة سريريًا.

يؤكد القسم على أهمية الالتزام بمعيار ISO/IEC 17025:2017، الذي يحدد متطلبات كفاءة وثبات المختبرات التي تقوم بالمعايرة والاختبار. أصبح الامتثال لهذا المعيار أكثر أهمية في سياق تقدم تكنولوجيا الرعاية الصحية والمتطلبات التنظيمية، حيث يضمن أن تحافظ المختبرات المعتمدة على طرق موثوقة وقياسات قابلة للتتبع. تهدف الورقة إلى مراجعة المبادئ واستراتيجيات التنفيذ والإجراءات الفنية ومزايا المعايرة المتوافقة مع ISO/IEC 17025 للمعدات الطبية الحيوية، مع التأكيد على أهميتها في تعزيز موثوقية المعدات وكفاءة الصيانة في بيئات الرعاية الصحية.

الطرق

في منهجية المعايرة الموضحة، تؤكد مرحلة التحضير قبل المعايرة على أهمية تحديد الجهاز الطبي الحيوي بدقة قبل المعايرة. يتضمن ذلك مراجعة دقيقة لهوية الجهاز مقابل طلب المعايرة، والذي يتضمن توثيق معلومات حيوية مثل الشركة المصنعة، ورقم الطراز، ورقم السلسلة، وإصدار البرنامج الثابت، وأي معرف أصول للمستشفى.

بالإضافة إلى ذلك، يتم إجراء فحص مادي للجهاز لتقييم حالته، مع البحث عن علامات التلف المادي، والأجزاء المفقودة، واختراق السوائل، والتآكل، والتعديلات غير المصرح بها. لا يتم معايرة الأجهزة التي تظهر عليها علامات تلف مرئية حتى يتم توثيق المشكلات والاعتراف بها من قبل العميل، حيث يمكن أن تؤثر هذه العيوب على صحة نتائج المعايرة. تضمن هذه الطريقة الدقيقة سلامة عملية المعايرة وموثوقية النتائج.

المناقشة

تقدم قسم المناقشة في الورقة مراجعة سردية لممارسات المعايرة المتوافقة مع ISO/IEC 17025 للمعدات الطبية الحيوية، مع تسليط الضوء على الأهمية الحاسمة للمعايرة في ضمان دقة التشخيص وفعالية العلاج وسلامة المرضى. استخدمت المراجعة بحثًا هيكليًا في الأدبيات عبر عدة قواعد بيانات، مع التركيز على المقالات والإرشادات المنشورة منذ عام 2000 التي تتعلق بمنهجيات المعايرة، وعدم اليقين في القياس، والتتبع المترولوجي. تم تحديد ما مجموعه 47 مرجعًا ذا صلة، مما يبرز المجالات الرئيسية مثل متطلبات المعايير، والمخاطر السريرية، وحواجز التنفيذ، خاصةً في البيئات ذات الموارد المنخفضة.

تستعرض الورقة البنود الخمسة الرئيسية لمعيار ISO/IEC 17025:2017، والتي تشمل متطلبات عامة، وهيكلية، وموارد، وعملية، ونظام إدارة. تؤكد على ضرورة الحيادية والسرية في بيانات المعايرة، وإنشاء أفراد مؤهلين ومرافق مناسبة، وأهمية قياس عدم اليقين في نتائج المعايرة. بالإضافة إلى ذلك، يتم مناقشة أهمية التتبع المترولوجي، حيث يضمن أن يمكن ربط نتائج القياس بالمعايير المعترف بها، مما يعزز الموثوقية. كما تفصل المراجعة المعدات الطبية الحيوية الشائعة التي تتطلب المعايرة، والعواقب السريرية المحتملة لأخطاء المعايرة، والتحديات التي تواجهها البلدان النامية، مثل الموارد المحدودة والتنظيم غير الكافي. يتم تقديم توصيات لتحسين ممارسات المعايرة عبر مختلف بيئات الموارد، مع التأكيد على الحاجة إلى تغييرات في السياسات وزيادة التدريب للأفراد.

Journal: International Journal of Research and Innovation in Applied Science, Volume: 11, Issue: 5
DOI: https://doi.org/10.51584/ijrias.2026.11050086
Publication Date: 2026-06-01
Author(s): Moktar Hossain et al.
Primary Topic: Quality and Safety in Healthcare

Overview

The section provides a comprehensive overview of the critical role that biomedical equipment plays in modern healthcare, emphasizing its importance in diagnosis, therapy, and patient monitoring. It highlights the necessity for regular calibration and validation of clinical devices to ensure their reliability, safety, and accuracy, as inaccuracies can lead to misdiagnosis and increased patient risk. The ISO/IEC 17025 standard is presented as a vital framework for maintaining the technical competence of calibration laboratories, ensuring traceability, and fostering confidence in calibration results. The paper reviews various calibration practices for biomedical devices, addressing aspects such as quality systems, metrological traceability, and personnel competence, while also discussing challenges faced by healthcare facilities in developing countries.

In the conclusion, the review applies ISO/IEC 17025:2017 requirements to the calibration lifecycle of biomedical equipment, distinguishing itself by providing a consolidated uncertainty budget template tailored for biomedical parameters. It underscores the structural disparities between high-income and low-resource countries, noting that the lack of national traceability and trained personnel exacerbates calibration issues. The paper argues that systematic calibration within a certified framework is essential for enhancing patient safety and healthcare outcomes, likening it to the importance of sterile surgical instruments. Furthermore, it suggests that the cost-effectiveness of remote calibration should be explored, particularly for low-acuity devices, to improve operational efficiency in healthcare settings.

Introduction

The introduction outlines the critical role of biomedical equipment in healthcare, encompassing devices such as electrocardiographs, ventilators, and surgical tools, which are essential for patient safety and effective clinical decision-making. It highlights the significant issue of equipment malfunction, particularly in low- and middle-income countries, where the World Health Organization (WHO) estimates that up to 50% of medical devices are out-of-service or misused due to inadequate calibration and maintenance. Calibration is defined as the process that establishes the relationship between instrument readings and reference standards, ensuring that devices operate within manufacturer specifications and clinically acceptable tolerances.

The section emphasizes the importance of adhering to the ISO/IEC 17025:2017 standard, which sets forth requirements for the competence and consistency of laboratories conducting calibration and testing. Compliance with this standard is increasingly vital in the context of advancing healthcare technology and regulatory demands, as it ensures that accredited laboratories maintain validated methods and traceable measurements. The paper aims to review the principles, implementation strategies, technical procedures, and advantages of ISO/IEC 17025-compliant calibration of biomedical equipment, underscoring its significance in enhancing equipment reliability and maintenance efficiency in healthcare settings.

Methods

In the calibration methodology outlined, the pre-calibration preparation phase emphasizes the importance of accurately identifying the biomedical device prior to calibration. This involves a thorough cross-check of the device’s identity against the calibration request, which includes documenting critical information such as the manufacturer, model number, serial number, firmware version, and any hospital asset identifier.

Additionally, a physical examination of the device is conducted to assess its condition, looking for signs of physical damage, missing parts, fluid intrusion, corrosion, and unauthorized alterations. Devices exhibiting visible damage are not calibrated until the issues are documented and acknowledged by the customer, as such defects can compromise the validity of the calibration results. This meticulous approach ensures the integrity of the calibration process and the reliability of the outcomes.

Discussion

The discussion section of the paper presents a narrative review of ISO/IEC 17025 compliant calibration practices for biomedical equipment, highlighting the critical importance of calibration in ensuring diagnostic accuracy, treatment effectiveness, and patient safety. The review utilized a structured literature search across multiple databases, focusing on articles and guidelines published since 2000 that pertain to calibration methodologies, measurement uncertainty, and metrological traceability. A total of 47 relevant references were identified, emphasizing key areas such as standard requirements, clinical risk, and implementation barriers, particularly in low-resource settings.

The paper outlines the five main clauses of ISO/IEC 17025:2017, which include general, structural, resource, process, and management system requirements. It underscores the necessity of impartiality and confidentiality in calibration data, the establishment of competent personnel and appropriate facilities, and the importance of measuring uncertainty in calibration results. Additionally, the significance of metrological traceability is discussed, as it ensures that measurement results can be linked to recognized standards, thereby enhancing reliability. The review also details common biomedical equipment requiring calibration, the potential clinical consequences of calibration errors, and the challenges faced in developing countries, such as limited resources and inadequate regulation. Recommendations for improving calibration practices across various resource settings are provided, emphasizing the need for policy changes and enhanced training for personnel.