DOI: https://doi.org/10.1016/j.nucengdes.2026.114790
تاريخ النشر: 2026-01-28
المؤلف: Philip Pfahl وآخرون
الموضوع الرئيسي: فيزياء وهندسة المفاعلات النووية
نظرة عامة
تقدم الورقة دراسة مرجعية لمفاعلات الملح المنصهر المعتدلة بالجرافيت (MSRs)، مع التركيز على التحقق من أكواد الفيزياء المتعددة الضرورية لترخيص المفاعلات النووية. تتناول الدراسة التفاعلات المعقدة بين النيوترونيك والحرارية-الهيدروليكية، وخاصة حركة سلف النيوترونات المتأخرة (DNPs) داخل وخارج قلب المفاعل. تم استخدام أساليب نمذجة متنوعة، بما في ذلك أكواد حرارية-هيدروليكية ذات شبكة خشنة (SIMMER وTRANSFORM)، وحدات قائمة على MOOSE (Squirrel وGriffin)، أكواد مونت كارلو عالية الدقة (iMC مع OpenFOAM)، وأكواد CFD عنصرية الطيف (Nek5000). تكشف الدراسة أنه بينما تتفق الأكواد بشكل عام على المحاكاة العابرة، تظهر اختلافات في الفيزياء الثابتة، خاصة فيما يتعلق بمجالات الحرارة ومعاملات التفاعل، مما يبرز التأثير الكبير لافتراضات النمذجة على النتائج.
تشير النتائج إلى أنه على الرغم من الاختلافات في أساليب النمذجة، تظهر النتائج العابرة عبر الأكواد المختلفة توافقًا جيدًا، مما يشير إلى أن المحاكاة العابرة قد لا تعكس بدقة دقة نتائج الفيزياء الفردية. تسهل الدراسة المرجعية تقييم كل من الأكواد عالية ومنخفضة الدقة، مما يعزز الثقة في نمذجة مفاعلات الملح الحراري. ستوسع الأعمال المستقبلية النموذج لتشمل ظواهر عابرة إضافية، مثل تسمم الزينون وحوادث التبريد الزائد، وستحقق في تأثيرات الطفو والتدفق المضطرب على ديناميات نقل الحرارة. تهدف هذه المقاربة الشاملة إلى تحسين الفهم والمحاكاة للسلوكيات المعقدة في مفاعلات الملح المنصهر.
مقدمة
تسلط مقدمة ورقة البحث الضوء على الاهتمام المتزايد بمفاعلات الملح المنصهر (MSRs) وضرورة وجود أكواد حسابية موثقة لتقييم أدائها، وسلوكها العابر، وسيناريوهات الحوادث. يُشار إلى تجربة مفاعل الملح المنصهر (MSRE) كمصدر وحيد للتحقق التجريبي الشامل، على الرغم من أن بياناتها غالبًا ما تكون مشوشة ومحدودة في المعلومات العابرة، مما يعقد جهود النمذجة. لمعالجة هذه التحديات، تم اقتراح دراسات مرجعية مبسطة بناءً على MSRE، مما يسمح بالتحقق من الأكواد مقابل البيانات التجريبية، خاصة في السيناريوهات التي تتضمن صفر طاقة ووقود ثابت.
توضح الورقة تطوير مفاعل حراري معتدل بالجرافيت يستخدم ملح فلوريد-يورانيوم-صوديوم-بوتاسيوم (FUNaK) كوقود. يتم استخدام نموذج قناة وقود واحدة لتبسيط ديناميات السوائل ونمذجة الحرارة-الهيدروليك بينما يتم التقاط الفيزياء الأساسية، مثل ردود الفعل الحرارية وردود الفعل لسلف النيوترونات المتأخرة (DNP). تم هيكلة الدراسة المرجعية بتعقيد تدريجي، بدءًا من التقييمات الثابتة والتقدم إلى التقييمات العابرة، بما في ذلك سيناريو فقدان التدفق غير المحمي (ULOF). يتم استخدام أكواد متنوعة، تتراوح من محاكاة مونت كارلو عالية الدقة إلى أكواد نظام ذات شبكة خشنة، لتسهيل المقارنات وتعزيز فهم آثار أساليب النمذجة المختلفة في مفاعلات الملح الحراري. ستفصل الأقسام التالية من الورقة هندسة الدراسة المرجعية، وظروف الحدود، وقدرات الأكواد، والنتائج، مما يساهم في الفهم الأوسع لسلوك وأداء مفاعلات الملح المنصهر.
النتائج
في قسم النتائج، يتم تفصيل أداء الأكواد الحسابية المختلفة في تنفيذ خطوات محددة موضحة في القسم 4. يتم استخدام الأكواد SIMMER وSquirrel وTRANSFORM وNek5000 وGriffin وiMC لمختلف جوانب محاكاة النيوترونيك والحرارية-الهيدروليكية. من الجدير بالذكر أن SIMMER تعالج بنجاح كل من النيوترونيك والحرارية-الهيدروليكية، بينما تستخدم Squirrel وTRANSFORM وNek5000 نتائج النيوترونيك من OpenMC. تستفيد Griffin وSquirrel من محلل MOOSE-NS للحرارية-الهيدروليكية، ويتم دمج iMC مع OpenFOAM. يتم تقديم ملخص يوضح أي كود يتوافق مع كل خطوة في الفيزياء في الجدول 14.
تشير النتائج إلى أن بعض المقارنات زائدة، خاصة بالنسبة لملفات التسخين المستمدة من OpenMC، والتي لم يتم الإبلاغ عنها لـ Squirrel وTRANSFORM وGriffin. يتم توثيق الحلول الفريدة التي تنتجها أي كود، مع توفر البيانات للتنزيل من Philip Pfahl (2025). بالنسبة للنتائج العشوائية الناتجة عن طرق مونت كارلو، يتم التعبير عن عدم اليقين كحيدة معيارية واحدة. نظرًا لعدم وجود حل مرجعي تحليلي، يتم حساب الفرق النسبي بين مخرجات كل كود والقيمة المتوسطة \( V = \frac{1}{N} \sum_{i=1}^{N} V_i \)، مع تعريف الفرق كـ \( D_i = \left| \frac{V_i – V}{V} \right| \). تتبع هذه المقاربة المنهجية التي وضعتها Tiberga وآخرون (2020).
المناقشة
ت outlines قسم المناقشة في ورقة البحث معلمات المفاعل وأساليب النمذجة المستخدمة في دراسة مرجعية تهدف إلى التحقق من صحة الأكواد الحسابية المختلفة لمفاعلات الملح المنصهر (MSRs). تتكون هندسة المفاعل من قناة وقود وكتلة معتدلة، مما يسهل المقارنات عبر أكواد النمذجة أحادية البعد (1D) وثنائية البعد (2D) وثلاثية البعد (3D). يتم تضمين منطقة خارج القلب لأخذ في الاعتبار إعادة تدوير الوقود وتفكك سلف النيوترونات المتأخرة (DNPs)، مع ترك تفاصيل النمذجة المحددة للمشاركين بسبب قيود الأكواد. تم تصميم النموذج الحراري الفيزيائي ليكون متوافقًا مع كل من الأكواد منخفضة وعالية الدقة، مما يسمح بالتحقق الفعال مقابل النماذج ذات الدقة الأعلى.
تم تحديد أبعاد المفاعل، مع إجمالي إنتاج طاقة يبلغ 350 كيلووات وسرعة تدفق مدخل تبلغ 0.2 م/ث. يفترض النموذج خارج القلب خلطًا شعاعيًا مثاليًا، مما يبسط المشكلة إلى تحليل أحادي البعد. يتم نمذجة إزالة الحرارة من خلال مبادل حراري، ويتم وصف درجة الحرارة وتركيز DNP بواسطة معادلات تفاضلية جزئية. يتم نمذجة ديناميات السوائل تحت ظروف تدفق لاميني، مع تطبيق شروط حدود عدم الانزلاق عند واجهة الجرافيت-الوقود. يستخدم نموذج النيوترونيك مكتبة بيانات النووية ENDF/B-VII.1، مع تركيبات نظيرية طبيعية لمعظم العناصر، باستثناء اليورانيوم المخصب. تتضمن الدراسة المرجعية عدة أكواد، بما في ذلك SIMMER وTRANSFORM وSquirrel، كل منها يساهم في جوانب مختلفة من عملية النمذجة، مما يضمن نهجًا شاملاً لمحاكاة سلوك المفاعل تحت ظروف مختلفة.
DOI: https://doi.org/10.1016/j.nucengdes.2026.114790
Publication Date: 2026-01-28
Author(s): Philip Pfahl et al.
Primary Topic: Nuclear reactor physics and engineering
Overview
The paper presents a benchmark study for graphite-moderated molten salt reactors (MSRs), focusing on the verification of multi-physics codes essential for licensing nuclear reactors. The benchmark addresses the complex interactions between neutronics and thermal-hydraulics, particularly the movement of delayed neutron precursors (DNPs) within and outside the reactor core. Various modeling approaches were employed, including coarse-mesh thermal-hydraulics codes (SIMMER and TRANSFORM), MOOSE-based modules (Squirrel and Griffin), high-fidelity Monte Carlo codes (iMC with OpenFOAM), and spectral element CFD codes (Nek5000). The study reveals that while the codes generally agree on transient simulations, discrepancies arise in steady-state physics, particularly concerning temperature fields and reactivity coefficients, highlighting the significant impact of modeling assumptions on results.
The findings indicate that despite differences in modeling approaches, the transient results across different codes show good agreement, suggesting that transient simulations may not reliably reflect the accuracy of single-physics results. The benchmark facilitates the evaluation of both high- and low-fidelity codes, enhancing confidence in modeling thermal MSRs. Future work will expand the model to include additional transient phenomena, such as xenon poisoning and overcooling accidents, and will investigate the effects of buoyancy and turbulent flow on heat transfer dynamics. This comprehensive approach aims to improve the understanding and simulation of complex behaviors in molten salt reactors.
Introduction
The introduction of the research paper highlights the increasing interest in Molten Salt Reactors (MSRs) and the necessity for validated computational codes to evaluate their performance, transient behavior, and accident scenarios. The Molten Salt Reactor Experiment (MSRE) is noted as the sole source of comprehensive experimental validation, although its data is often noisy and limited in transient information, complicating modeling efforts. To address these challenges, simplified benchmarks based on the MSRE have been proposed, allowing for code validation against experimental data, particularly in scenarios involving zero power and stationary fuel.
The paper outlines the development of a graphite-moderated thermal MSR utilizing Fluoride-Uranium-Sodium-Potassium (FUNaK) salt as fuel. A single fuel channel model is employed to simplify fluid dynamics and thermal-hydraulics modeling while capturing essential physics, such as temperature feedback and delayed neutron precursor (DNP) feedback. The benchmark is structured in progressive complexity, starting with steady-state evaluations and advancing to transient assessments, including an Unprotected Loss Of Flow (ULOF) scenario. Various codes, ranging from high-fidelity Monte Carlo simulations to coarse-mesh system codes, are utilized to facilitate comparisons and enhance understanding of the implications of different modeling approaches in thermal MSRs. The subsequent sections of the paper will detail the benchmark’s geometry, boundary conditions, code capabilities, and results, ultimately contributing to the broader understanding of MSR behavior and performance.
Results
In the Results section, the performance of various computational codes in executing specific steps outlined in Section 4 is detailed. The codes SIMMER, Squirrel, TRANSFORM, Nek5000, Griffin, and iMC are employed for different aspects of neutronics and thermal-hydraulics simulations. Notably, SIMMER successfully addresses both neutronics and thermal-hydraulics, while Squirrel, TRANSFORM, and Nek5000 utilize neutronics results from OpenMC. Griffin and Squirrel leverage the MOOSE-NS solver for thermal-hydraulics, and iMC is integrated with OpenFOAM. A summary of which code corresponds to each physics step is provided in Table 14.
The results indicate that some comparisons are redundant, particularly for heating profiles derived from OpenMC, which are not reported for Squirrel, TRANSFORM, and Griffin. Unique solutions produced by any code are documented, with data available for download from Philip Pfahl (2025). For stochastic results generated by Monte Carlo methods, uncertainties are expressed as one standard deviation. Due to the absence of an analytical reference solution, the relative discrepancy between each code’s output and the average value \( V = \frac{1}{N} \sum_{i=1}^{N} V_i \) is computed, with the discrepancy defined as \( D_i = \left| \frac{V_i – V}{V} \right| \). This approach follows the methodology established by Tiberga et al. (2020).
Discussion
The discussion section of the research paper outlines the reactor parameters and modeling approaches used in a benchmark study aimed at validating various computational codes for molten salt reactors (MSRs). The reactor geometry consists of a fuel channel and a moderator block, facilitating comparisons across one-dimensional (1D), two-dimensional (2D), and three-dimensional (3D) modeling codes. The out-of-core region is included to account for the recirculation of fuel and the decay of delayed neutron precursors (DNPs), with specific modeling details left to participants due to code-specific constraints. The thermophysical model is designed to be compatible with both low- and high-fidelity codes, allowing for effective validation against higher-fidelity models.
The reactor’s dimensions are specified, with a total power output of 350 kW and an inlet flow velocity of 0.2 m/s. The out-of-core model assumes perfect radial mixing, simplifying the problem to a 1D analysis. Heat removal is modeled through a heat exchanger, and the temperature and DNP concentration are described by partial differential equations. Fluid dynamics are modeled under laminar flow conditions, with no-slip boundary conditions applied at the graphite-fuel interface. The neutronics model utilizes the ENDF/B-VII.1 nuclear data library, with natural isotopic compositions for most elements, except for enriched uranium. The benchmark involves multiple codes, including SIMMER, TRANSFORM, and Squirrel, each contributing to different aspects of the modeling process, ensuring a comprehensive approach to simulating the reactor’s behavior under various conditions.
