DOI: https://doi.org/10.1007/s10098-026-03447-2
تاريخ النشر: 2026-03-03
المؤلف: Tugba Keskin وآخرون
الموضوع الرئيسي: إدارة المخلفات وخصائصها
نظرة عامة
تناقش هذه الفقرة من البحث الطبيعة المزدوجة لفضلات المناجم، التي تُعتبر تقليديًا عبئًا بيئيًا بسبب حجمها الكبير والمخاطر المرتبطة بها، مثل تكوين الغبار وتلوث المعادن الثقيلة. ومع ذلك، تشير النتائج الحديثة إلى أن هذه الفضلات يمكن أن تكون موارد ثانوية قيمة عند معالجتها بشكل مناسب. يسلط البحث الضوء على تطبيقات مختلفة لنفايات التعدين، لا سيما في قطاع البناء، حيث تسهل تقنيات مثل التعبئة بالمعجون الأسمنتية التخلص الآمن تحت الأرض. بالإضافة إلى ذلك، تظهر نفايات التعدين وعدًا كمواد أولية للطوب والسيراميك والبوليمرات الجيولوجية، اعتمادًا على خصائصها المعدنية والكيميائية.
يؤكد البحث على ضرورة وجود نهج مخصص لاستخدام نفايات التعدين، حيث لا يمكن لتقنية واحدة معالجة الخصائص المتنوعة لهذه المواد. ويبرز أهمية طرق المعالجة المسبقة—الكيميائية والحرارية والميكانيكية—في تعزيز التفاعل وقابلية استخدام الفضلات في البناء وتطبيقات صناعية أخرى. يدعو البحث إلى اعتبار متوازن بين الأداء الفني والاستدامة، بهدف دمج فضلات التعدين في اقتصاد دائري. من خلال مراجعة الأدبيات بشكل منهجي، يوفر هذا البحث إطارًا شاملاً لفهم التطبيقات المحتملة لنفايات التعدين، مما يوجه الأبحاث المستقبلية نحو حلول مستدامة ومفيدة اقتصاديًا.
مقدمة
تسلط المقدمة الضوء على التحديات البيئية الكبيرة التي تطرحها نفايات التعدين، والتي تصل إلى حوالي 20 مليار طن سنويًا في أوروبا وحدها. الأنواع المتنوعة من النفايات الناتجة، بما في ذلك المنتجات الثانوية المعدنية والصناعية، تهدد النظم البيئية من خلال تلوث الهواء والماء والتربة، مما يستلزم طرق التخلص الفعالة. يتم تدقيق ممارسات إدارة النفايات الحالية، التي تتضمن بشكل أساسي التخزين فوق الأرض والتخلص تحت الأرض، بشكل متزايد بسبب المخاطر مثل تجاوز سعة السدود والتدهور البيئي. استجابةً لهذه التحديات، تدعو المقدمة إلى تقنيات مبتكرة للتعامل مع النفايات، بما في ذلك إزالة المياه، وإعادة التدوير، وطرق التخلص المتكاملة، التي تتماشى مع أهداف التنمية المستدامة (SDGs) التي تهدف إلى تعزيز الاستهلاك المسؤول والمجتمعات المستدامة.
يهدف الاستعراض إلى استكشاف كل من الأساليب التقليدية والمبتكرة للتخلص من نفايات التعدين، مع معالجة التحديات الحالية وإمكانية إعادة استخدام الفضلات كمواد خام في قطاعات مختلفة، لا سيما البناء. ويؤكد على أهمية تحويل نفايات التعدين من خلال تقنيات المعالجة المتقدمة للتخفيف من الآثار البيئية مع المساهمة في الاستدامة الاقتصادية. ستتناول المناقشة تطور ممارسات إدارة النفايات، وتطوير منتجات جديدة، وتعزيز الخصائص الفيزيائية والكيميائية للنفايات، مما يعزز في النهاية منظورًا شاملًا حول استخدام النفايات.
الطرق
تستخدم منهجية هذه الدراسة نهجًا مختلطًا، يجمع بين التحليلات الكمية والنوعية لإجراء تحليل ببليومتري ومراجعة منهجية للأدبيات حول إعادة استخدام وتثمين نفايات المناجم والفضلات. تتبع عملية البحث إطارًا منظمًا يتضمن “التحديد، والفحص، والأهلية، والإدراج/الاستبعاد”، إلى جانب “تحليل البيانات”. تم تطوير سلسلة بحث مستهدفة للتركيز على الكلمات الرئيسية ذات الصلة بإعادة استخدام وإدارة نفايات المناجم، تشمل مصطلحات مثل “نفايات المناجم”، “الفضلات”، “إعادة الاستخدام”، “التثمين”، وعمليات مرتبطة مختلفة مثل الطفو واستعادة المعادن. تم إجراء البحث في الأدبيات عبر خمسة قواعد بيانات ببليوغرافية، مع التركيز على أقسام معينة من الوثائق التي تتناول الآثار البيئية والأطر التنظيمية.
تسلط الدراسة الضوء على إمكانيات المواد الأسمنتية المساعدة (SCMs) المشتقة من نفايات التعدين، والتي يمكن أن تحل جزئيًا أو كليًا محل الأسمنت التقليدي في تطبيقات البناء. لقد أظهرت SCMs، بما في ذلك مواد مثل الخبث المجروش ورماد الفحم المسحوق، أنها تعزز الخصائص الميكانيكية للخرسانة بينما تقلل من انبعاثات CO2 المرتبطة بإنتاج الأسمنت. ومن الجدير بالذكر أن الأبحاث تشير إلى أن دمج فضلات مناجم النحاس كبديل للأسمنت يمكن أن يحسن من القوة الانضغاطية، بينما تظهر فضلات الحديد والذهب أيضًا نشاطًا بوزولانيًا كبيرًا عند معالجتها بشكل مناسب. ومع ذلك، تتطلب التحديات مثل وجود معادن الكبريتيد في الفضلات إدارة دقيقة لتجنب التفاعلات الضارة أثناء ترطيب الأسمنت. بشكل عام، تؤكد النتائج على الفوائد البيئية والاقتصادية لاستخدام نفايات التعدين كمواد SCM، بينما تعالج أيضًا الحاجة إلى طرق معالجة فعالة لتعزيز أدائها في التطبيقات الأسمنتية.
المناقشة
تسلط قسم المناقشة في ورقة البحث الضوء على التحديات البيئية والاجتماعية الاقتصادية الكبيرة التي تطرحها سوء إدارة نفايات التعدين. مع استنفاد عمليات التعدين للمعادن الغنية، تزداد كمية النفايات، مما يؤدي إلى مشاكل بيئية خطيرة مثل تلوث الهواء والماء، وتلوث التربة، والأضرار البيئية. تكشف البيانات التاريخية أن طرق التخلص التقليدية للنفايات، لا سيما سدود الفضلات، قد أدت إلى فشل كارثي، مما تسبب في فقدان الأرواح وأضرار اقتصادية واسعة النطاق. على سبيل المثال، تم الإبلاغ عن ما يقرب من 3,000 حالة وفاة نتيجة لانهيارات سدود الفضلات منذ عام 2010، مع حوادث بارزة في الصين ورومانيا تمثل العواقب الوخيمة لممارسات إدارة النفايات غير الكافية.
لمعالجة هذه التحديات، تدعو الورقة إلى استراتيجيات مبتكرة لإدارة النفايات تركز على إعادة التدوير والاقتصاد الدائري. من خلال إعادة تقييم نفايات التعدين كموارد محتملة، يمكن للصناعات التخفيف من الآثار البيئية مع تعزيز الجدوى الاقتصادية. تُناقش تقنيات مثل التعبئة بالمعجون الأسمنتية (CPB) وإنتاج البوليمرات الجيولوجية من نفايات التعدين كبدائل مستدامة يمكن أن تثبت النفايات وتستعيد المواد القيمة. إن الإدارة الفعالة لفضلات المناجم لا تقلل فقط من المخاطر البيئية، بل تساهم أيضًا في كفاءة الموارد وتطوير قطاعات أعمال جديدة، مما يعزز في النهاية صناعة تعدين أكثر استدامة.
DOI: https://doi.org/10.1007/s10098-026-03447-2
Publication Date: 2026-03-03
Author(s): Tugba Keskin et al.
Primary Topic: Tailings Management and Properties
Overview
This research paper section discusses the dual nature of mine tailings, traditionally viewed as an environmental burden due to their high volume and associated risks, such as dust formation and heavy metal pollution. However, recent findings suggest that these tailings can serve as valuable secondary resources when appropriately processed. The study highlights various applications of mining waste, particularly in the construction sector, where technologies like cemented paste backfill facilitate safe underground disposal. Additionally, mining waste shows promise as a precursor for bricks, ceramics, and geopolymers, contingent on its mineralogical and chemical properties.
The paper emphasizes the necessity of tailored approaches for utilizing mining waste, as no single technology can address the diverse characteristics of these materials. It underscores the importance of pretreatment methods—chemical, thermal, and mechanical—in enhancing the reactivity and usability of tailings for construction and other industrial applications. The study advocates for a balanced consideration of technical performance and sustainability, aiming to integrate mining tailings into a circular economy. By systematically reviewing the literature, this research provides a comprehensive framework for understanding the potential applications of mining waste, thereby guiding future research towards sustainable and economically beneficial solutions.
Introduction
The introduction highlights the significant environmental challenges posed by mining waste, which amounts to approximately 20 billion tons annually in Europe alone. The diverse types of waste generated, including metallic and industrial byproducts, threaten ecosystems through contamination of air, water, and soil, necessitating effective disposal methods. Current waste management practices, primarily involving above-ground storage and underground disposal, are increasingly scrutinized due to risks such as dam overcapacity and environmental degradation. In response to these challenges, the introduction advocates for innovative waste handling techniques, including dewatering, recycling, and integrated disposal methods, which align with sustainable development goals (SDGs) aimed at fostering responsible consumption and sustainable communities.
The review aims to explore both conventional and innovative approaches to mining waste disposal, addressing existing challenges and the potential for reusing tailings as raw materials in various sectors, particularly construction. It emphasizes the importance of transforming mining waste through advanced treatment techniques to mitigate environmental impacts while contributing to economic sustainability. The discussion will encompass the evolution of waste management practices, the development of new products, and the enhancement of the physico-chemical properties of waste, ultimately promoting a holistic perspective on waste utilization.
Methods
The methodology of this study employs a mixed-methods approach, integrating quantitative and qualitative analyses to perform a bibliometric analysis and systematic literature review on the reuse and valorization of mine waste and tailings. The research process follows a structured framework comprising “Identification, Screening, Eligibility, and Inclusion/Exclusion,” alongside “Data Analysis.” A targeted search string was developed to focus on relevant keywords related to mine waste reuse and management, encompassing terms such as “mine waste,” “tailings,” “reuse,” “valorization,” and various associated processes like flotation and metal recovery. The literature search was conducted across five bibliographic databases, emphasizing specific sections of the documents that address environmental impacts and regulatory frameworks.
The study highlights the potential of supplementary cementitious materials (SCMs) derived from mining wastes, which can partially or fully replace traditional cement in construction applications. SCMs, including materials like granulated slag and pulverized fly ash, have been shown to enhance the mechanical properties of concrete while reducing CO2 emissions associated with cement production. Notably, research indicates that incorporating copper mine tailings as a cement substitute can optimize compressive strength, while iron and gold tailings also demonstrate significant pozzolanic activity when treated appropriately. However, challenges such as the presence of sulfide minerals in tailings necessitate careful management to avoid detrimental reactions during cement hydration. Overall, the findings underscore the environmental and economic benefits of utilizing mining wastes as SCMs, while also addressing the need for effective treatment methods to enhance their performance in cementitious applications.
Discussion
The discussion section of the research paper highlights the significant environmental and socioeconomic challenges posed by mining waste mismanagement. As mining operations deplete rich mineral ores, the generation of waste increases, leading to severe environmental issues such as air and water contamination, soil pollution, and ecological damage. Historical data reveal that traditional waste disposal methods, particularly tailings dams, have resulted in catastrophic failures, causing loss of life and extensive economic damage. For instance, nearly 3,000 fatalities have been attributed to tailings dam collapses since 2010, with notable incidents in China and Romania exemplifying the dire consequences of inadequate waste management practices.
To address these challenges, the paper advocates for innovative waste management strategies that emphasize recycling and the circular economy. By re-evaluating mining waste as a potential resource, industries can mitigate environmental impacts while enhancing economic viability. Techniques such as cemented paste backfill (CPB) and the production of geopolymers from mining waste are discussed as sustainable alternatives that can stabilize waste and recover valuable materials. The effective management of mine tailings not only reduces environmental risks but also contributes to resource efficiency and the development of new business sectors, ultimately fostering a more sustainable mining industry.
