DOI: https://doi.org/10.1016/j.eiar.2026.108364
تاريخ النشر: 2026-02-06
المؤلف: Israel Carreira‐Barral وآخرون
الموضوع الرئيسي: اختيار المواد وخصائصها
نظرة عامة
تقدم هذه البحث منهجية جديدة لتقييم الاستدامة في صناعة الصلب من خلال دمج خمسة أبعاد—البيئية، الاقتصادية، الاجتماعية، الحرجة، والدائرية—في مؤشر استدامة واحد (SI)، يتم تطبيعه على مقياس من 0 إلى 1. هذه الطريقة مناسبة بشكل خاص لمراحل التطوير المبكرة وتستخدم التركيب العنصري للمواد المدخلة، مثل الخردة المعدنية والمواد الخام، لتحديد تلك التي لديها أعلى مخاوف استدامة. أظهرت تحليل الحساسية عبر 11 سيناريو أن السبائك الحديدية والعناصر النقية تصدرت باستمرار كأقل المواد استدامة، بقيم SI أقل من 0.4، مما يبرز وضعها كمواد حرجة كما حددته المفوضية الأوروبية.
تسهل المنهجية اتخاذ قرارات مستنيرة بشأن اختيار المواد، كما تؤكد على أهمية إعطاء الأولوية للخردة المعدنية لتعزيز الدائرية وتقليل الاعتماد على الموارد العذراء. تتماشى النتائج مع الأدبيات الموجودة، مما يشير إلى أنه بينما تعتبر المواد الخام التقليدية غالبًا غير مستدامة، يمكن أن تكون الخردة المناسبة بدائل قابلة للتطبيق. تم تصميم الإطار ليكون شفافًا وقابلًا للتكرار، مما يوفر لأصحاب المصلحة أداة لتقييم ومقارنة استدامة المواد المختلفة. تهدف التطبيقات المستقبلية لهذه المنهجية، بما في ذلك دمجها في أداة ذكاء اصطناعي ضمن مشروع ‘IRIDISCENTE’، إلى تحسين التقييم من خلال النظر في المركبات الكيميائية بدلاً من التركيب العنصري فقط، مما يعزز قابليتها للتطبيق ودقتها في مراحل متقدمة من تطوير المواد.
مقدمة
تسلط مقدمة هذه الورقة البحثية الضوء على الدور الحاسم للصلب في الإنتاج العالمي والتوظيف، حيث تشير أرقام 2024 إلى إنتاج صلب خام يبلغ 1885 مليون طن، يتم استخدامه بشكل أساسي في البناء (52%)، والمعدات الميكانيكية (16%)، وقطاعات السيارات (12%). تساهم الاتحاد الأوروبي بنسبة 6.9% من هذا الإنتاج، موفرة حوالي 298,000 وظيفة. تؤكد الورقة على الأهمية المتزايدة لخردة الصلب في الإنتاج، والتي لا تقلل فقط من الاعتماد على المواد العذراء ولكن تعزز أيضًا الاستدامة من خلال خفض انبعاثات CO2 بشكل كبير—حتى 73%—مقارنة بإنتاج خام الحديد التقليدي. يجادل المؤلفون بأن الانتقال إلى صناعة الصلب المعتمد على الخردة يمكن أن يخفف من الآثار الاجتماعية السلبية المرتبطة باستخراج المواد الخام، وبالتالي تعزيز صناعة أكثر استدامة.
تقترح الدراسة منهجية جديدة لتقييم الاستدامة في إنتاج الصلب من خلال دمج خمسة أبعاد: البيئية، الاقتصادية، الاجتماعية، الحرجة، والدائرية، التي يتم تقييمها من خلال التركيب العنصري. هذه الطريقة ذات صلة خاصة بمراحل التطوير المبكرة حيث تكون البيانات نادرة، مما يسمح بإنشاء مؤشر استدامة شامل (SI) يمكن أن يوجه اتخاذ القرار في تصميم السبائك. يتم إثبات قابلية تطبيق المنهجية باستخدام مجموعة بيانات تضم 207 مواد مقدمة من ArcelorMittal España، بهدف تحديد نقاط الاستدامة الساخنة واقتراح مواد بديلة. تركز أسئلة البحث على تقييم استدامة المواد بناءً فقط على التركيب العنصري وتقديم توصيات لإنتاج السبائك، مما يسهم في صناعة صلب أكثر استدامة.
طرق
في هذا القسم، يتم توضيح المنهجية لتقييم الاستدامة عبر مواد مختلفة، مع التركيز على دمج مؤشرات البيئة والاقتصاد والاجتماع والحرجة والدائرية في مؤشر استدامة موحد (SI). تبدأ العملية بجمع البيانات ومعالجتها، تليها تطوير نموذج يحسب خمسة مؤشرات أولية لكل مادة. يتم تطبيع هذه المؤشرات على مقياس مشترك لضمان القابلية للمقارنة، ويتم تطبيق عامل وزن بناءً على أهمية أصحاب المصلحة. يسمح SI الناتج، الذي يتراوح من 0 (أدنى استدامة) إلى 1 (استدامة مثالية)، بتقييم شامل لاستدامة المواد.
تكشف تحليل الحساسية أن السبائك الحديدية والعناصر النقية تصدرت باستمرار كأقل المواد استدامة بسبب عدم وجود دائرية لها وأعباء بيئية واقتصادية واجتماعية كبيرة. تقترح الدراسة أنه يجب استبدال هذه المواد ببدائل أكثر استدامة، وخاصة المواد الخردة التي يمكن أن توفر العناصر اللازمة مع تقليل الاعتماد على الموارد النادرة. يتم تقديم كتالوج للبدائل الخردة المناسبة، مما يبرز إمكاناتها لتعزيز الدائرية وتقليل تكاليف الشراء. تؤكد النتائج على فائدة المنهجية لأصحاب المصلحة في صناعة الصلب، مما يسهل اتخاذ قرارات مستنيرة بشأن اختيار المواد ويعزز الممارسات المستدامة في تصنيع السبائك.
النتائج
في هذا القسم، يتم تفصيل نتائج المنهجية المقترحة، مع التركيز على تطبيقها على اختيار محدد من الخردة والمواد الخام. تشير النتائج إلى أن المنهجية تعزز بشكل فعال معالجة واستخدام هذه المواد، مما يؤدي إلى تحسين الكفاءة والاستدامة في إدارة الموارد.
تظهر البيانات الكمية تحسينات كبيرة في مقاييس العائد والجودة، مما يشير إلى أن النهج لا يحسن فقط استعادة المواد ولكن أيضًا يقلل من النفايات. يضع النقاش هذه النتائج في سياق الأدبيات الموجودة، مما يبرز الآثار المحتملة على الممارسات الصناعية والاتجاهات البحثية المستقبلية في علوم المواد وتقنيات إعادة التدوير.
النقاش
في قسم النقاش من الورقة البحثية، يوضح المؤلفون المنهجية لتقييم استدامة 207 خردة معدنية ومواد خام بناءً على تركيبها العنصري. يقومون بتحليل ما يصل إلى 22 عنصرًا كيميائيًا، بما في ذلك الألمنيوم (Al)، الحديد (Fe)، والكوبالت (Co)، والتي تعتبر حاسمة لتحديد الأداء الفني للمواد وآثارها البيئية. تؤكد الدراسة على أهمية استخدام البيانات العنصرية، حيث يسمح ذلك بإجراء مقارنات متسقة عبر مواد متنوعة، على الرغم من التباينات في المركبات الكيميائية. تتضمن مجموعة البيانات، التي تم جمعها بواسطة ArcelorMittal España، أسماء تجارية، درجات جودة، وتركيبات عنصرية، مع حساب القيم المتوسطة لكل عنصر لتسهيل تقييم مؤشرات الاستدامة المختلفة: البيئية (E)، الاقتصادية (Ec)، الاجتماعية (S)، الحرجة (Cr)، والدائرية (C).
يحدد المؤلفون نهجًا شاملاً لحساب المؤشرات الأولية وتطبيعها لإنشاء مؤشر استدامة مركب (SI). يدمج هذا المؤشر المؤشرات الموزونة والمطابقة، مما يوفر مقياسًا كميًا للاستدامة يتراوح من 0 إلى 1. تتضمن المنهجية تحليلات حساسية عبر سيناريوهات متعددة لتقييم قوة SI، مما يكشف أن الغالبية العظمى من المواد تظهر استدامة عالية تحت ظروف مختلفة. ومن الجدير بالذكر أن التحليل يحدد مواد معينة، مثل الفيروموليبدينوم والكوبالت النقي، كأقل المواد استدامة، مما يبرز فائدة الإطار كأداة دعم قرار لأصحاب المصلحة في اختيار المواد وتقييمات الاستدامة.
القيود
تقدم الدراسة منهجية لتقييم الاستدامة في مراحل مبكرة من المواد بناءً على تركيبها العنصري وجودتها، مع الاعتراف بعدة قيود. بشكل أساسي، يقتصر التحليل على وجود العناصر في المواد بدلاً من مركباتها الكيميائية، والتي يمكن أن توفر ملفًا أكثر دقة للاستدامة. تتفاقم هذه القيود بسبب البيانات النموذجية المقدمة من شركات الصلب، والتي غالبًا ما تفتقر إلى التصنيف الكيميائي الشامل، خاصةً لمجموعات البيانات الكبيرة. بالإضافة إلى ذلك، تم تقريب النسب المئوية للعناصر باستخدام القيم المتوسطة من النطاقات، مما أدخل بعض عدم اليقين الذي يعتبر مقبولًا للتقييمات الأولية.
تتمثل قيود أخرى هامة في أن النتائج محددة لمجموعة البيانات التي تم تحليلها؛ قد تؤثر التغييرات في مجموعة البيانات على عملية التطبيع وبالتالي على مؤشرات الاستدامة المستمدة. يتم تبرير هذا النهج في سياق الابتكارات ذات مستوى جاهزية التكنولوجيا المنخفض (TRL)، حيث الهدف هو تحديد الفروق النسبية بين المواد بدلاً من تحقيق قابلية مقارنة عالمية. يمكن أن تعزز اتجاهات البحث المستقبلية المنهجية من خلال دمج بيانات تركيبية مفصلة ومخططات تطبيع موحدة، بينما تستكشف أيضًا أساليب تكيفية لتوسيع قاعدة بيانات المواد. ومع ذلك، ستتطلب هذه التحسينات توفر بيانات أكبر، مما يتماشى مع المنهجية في مراحل أكثر تقدمًا من تطوير المنتجات.
DOI: https://doi.org/10.1016/j.eiar.2026.108364
Publication Date: 2026-02-06
Author(s): Israel Carreira‐Barral et al.
Primary Topic: Material Selection and Properties
Overview
This research presents a novel methodology for assessing sustainability in the steelmaking industry by integrating five dimensions—environmental, economic, social, criticality, and circularity—into a single sustainability index (SI), normalized to a scale from 0 to 1. The approach is particularly suited for early development stages and utilizes the elemental composition of input materials, such as metal scraps and raw materials, to identify those with the highest sustainability concerns. A sensitivity analysis across 11 scenarios demonstrated that ferroalloys and pure elements consistently ranked as the least sustainable, with SI values below 0.4, highlighting their critical material status as defined by the European Commission.
The methodology not only facilitates informed decision-making regarding material selection but also emphasizes the importance of prioritizing metal scraps to enhance circularity and reduce reliance on virgin resources. The findings align with existing literature, suggesting that while traditional raw materials are often deemed unsustainable, suitable scraps can serve as viable alternatives. The framework is designed to be transparent and reproducible, providing stakeholders with a tool to evaluate and compare the sustainability of various materials. Future applications of this methodology, including its integration into an AI tool within the ‘IRIDISCENTE’ project, aim to refine the assessment by considering chemical compounds rather than just elemental composition, thus enhancing its applicability and precision in advanced stages of material development.
Introduction
The introduction of this research paper highlights the critical role of steel in global production and employment, with 2024 figures indicating a crude steel output of 1885 Mt, predominantly utilized in construction (52%), mechanical equipment (16%), and automotive sectors (12%). The European Union contributes 6.9% of this output, employing approximately 298,000 individuals. The paper emphasizes the increasing importance of steel scrap in production, which not only reduces reliance on virgin materials but also enhances sustainability by significantly lowering CO2 emissions—up to 73%—compared to traditional iron ore production. The authors argue that the transition to scrap-based steelmaking can mitigate adverse social impacts associated with raw material extraction, thus promoting a more sustainable industry.
The study proposes a novel methodology for assessing sustainability in steel production by integrating five dimensions: environmental, economic, social, criticality, and circularity, evaluated through elemental composition. This approach is particularly relevant for early-stage development where data is scarce, allowing for a comprehensive sustainability index (SI) that can guide decision-making in alloy design. The methodology’s applicability is demonstrated using a dataset of 207 materials provided by ArcelorMittal España, aiming to identify sustainability hotspots and propose alternative materials. The research questions focus on assessing material sustainability based solely on elemental composition and providing recommendations for alloy production, ultimately contributing to a more sustainable steel industry.
Methods
In this section, the methodology for assessing sustainability across various materials is outlined, emphasizing the integration of environmental, economic, social, criticality, and circularity indicators into a unified sustainability index (SI). The process begins with data collection and preprocessing, followed by the development of a model that calculates five raw indicators for each material. These indicators are normalized to a common scale to ensure comparability, and a weighting factor is applied based on stakeholder relevance. The resulting SI, which ranges from 0 (lowest sustainability) to 1 (optimal sustainability), allows for a comprehensive evaluation of material sustainability.
The sensitivity analysis reveals that ferroalloys and pure elements consistently rank as the least sustainable materials due to their zero circularity and significant environmental, economic, and social burdens. The study suggests that these materials should be replaced with more sustainable alternatives, particularly scrap materials that can provide necessary elements while reducing reliance on scarce resources. A catalogue of suitable scrap alternatives is presented, highlighting their potential to enhance circularity and lower procurement costs. The findings underscore the methodology’s utility for stakeholders in the steel industry, facilitating informed decision-making regarding material selection and promoting sustainable practices in alloy manufacturing.
Results
In this section, the results of the proposed methodology are detailed, focusing on its application to a specific selection of scraps and raw materials. The findings indicate that the methodology effectively enhances the processing and utilization of these materials, leading to improved efficiency and sustainability in resource management.
Quantitative data demonstrate significant improvements in yield and quality metrics, suggesting that the approach not only optimizes material recovery but also minimizes waste. The discussion further contextualizes these results within existing literature, highlighting the potential implications for industrial practices and future research directions in material science and recycling technologies.
Discussion
In the discussion section of the research paper, the authors detail the methodology for assessing the sustainability of 207 metal scraps and raw materials based on their elemental composition. They analyze up to 22 chemical elements, including aluminum (Al), iron (Fe), and cobalt (Co), which are crucial for determining the materials’ technical performance and environmental impacts. The study emphasizes the importance of using elemental data, as it allows for consistent comparisons across diverse materials, despite variations in chemical compounds. The dataset, collected by ArcelorMittal España, includes commercial names, quality grades, and elemental compositions, with mean values calculated for each element to facilitate the assessment of various sustainability indicators: environmental (E), economic (Ec), social (S), criticality (Cr), and circularity (C).
The authors outline a comprehensive approach for calculating raw indicators and normalizing them to create a composite sustainability index (SI). This index integrates the weighted normalized indicators, providing a quantitative measure of sustainability that ranges from 0 to 1. The methodology incorporates sensitivity analyses across multiple scenarios to evaluate the robustness of the SI, revealing that the majority of materials exhibit high sustainability under various conditions. Notably, the analysis identifies specific materials, such as ferromolybdenum and pure cobalt, as having the lowest sustainability scores, thereby highlighting the framework’s utility as a decision-support tool for stakeholders in material selection and sustainability assessments.
Limitations
The study presents a methodology for early-stage sustainability assessment of materials based on their elemental composition and quality, acknowledging several limitations. Primarily, the analysis is restricted to the elemental presence in materials rather than their chemical compounds, which could provide a more accurate sustainability profile. This limitation is compounded by the typical data provided by steel companies, which often lacks comprehensive chemical characterization, especially for large datasets. Additionally, the weight percentages of elements were approximated using mean values from ranges, introducing some uncertainty that is deemed acceptable for preliminary assessments.
Another significant limitation is that the results are specific to the dataset analyzed; changes in the dataset could affect the normalization process and, consequently, the derived sustainability indices. This approach is justified within the context of low-technology readiness level (TRL) innovations, where the goal is to identify relative differences among materials rather than achieve universal comparability. Future research directions could enhance the methodology by incorporating detailed compositional data and standardized normalization schemes, while also exploring adaptive approaches for material database expansion. However, these improvements would necessitate greater data availability, aligning the methodology with more advanced stages of product development.
