نمذجة الجيود المحلي لشرق كاليمانتان من خلال دمج بيانات الجاذبية الجوية والأرضية باستخدام طريقة KTH Modelling the local geoid of East Kalimantan from combination of airborne and terrestrial gravity data using the KTH method

شارك:
المجلة: Geodesy and Cartography، المجلد: 52، العدد: 1
DOI: https://doi.org/10.3846/gac.2026.21948
تاريخ النشر: 2026-03-31
المؤلف: S N Oktavia وآخرون
الموضوع الرئيسي: الجيولوجيا الفيزيائية وقياسات الجاذبية

نظرة عامة

تبحث هذه الدراسة في الجيود الجاذبي لشرق كاليمنتان، إندونيسيا، باستخدام طريقة KTH. تم حساب الجيود من خلال دمج بيانات الجاذبية الجوية والأرضية، ونموذج DTU17 للمناطق البحرية، وشذوذات EGM2008، وSRTM15+، وGGM من EGM2008. تم تنفيذ النمذجة باستخدام برنامج LSMSSOFT مع فاصل شبكي قدره 0.01°، وشملت التقييم 14 نوعًا من الانقلاب تتراوح من 0.1° إلى 2°. تم تحديد الانقلاب الأمثل عند 0.6°، مما أسفر عن انحراف معياري قدره 0.0532 م عند تقييمه مقابل 264 نقطة بيانات GNSS-Levelling. بعد التعديل على المعايير المد والجزر، تحسن الدقة قليلاً إلى 0.0526 م. بالمقارنة، تفوقت طريقة KTH على نموذج INAGEOID2020 v.2، الذي كان له انحراف معياري قدره 0.0588 م، مما يظهر تحسينًا في الدقة قدره 0.0062 م.

في الختام، تُظهر طريقة KTH فعالية في نمذجة تموجات الجيود، حيث تنتج أربع تصحيحات إضافية، مع كون تصحيحات التضاريس والتواصل النزولي هي الأكثر أهمية. إن اختيار نموذج الجاذبية البحرية (MGG) والانقلاب أمر حاسم للحصول على قيم تموج دقيقة. من بين نماذج MGG المختلفة التي تم تقييمها، قدم EGM2008 أصغر انحراف معياري في اختلافات التموج. تسلط الدراسة الضوء على أهمية تعديلات المعايير المد والجزر في محاذاة قيم تموج الجيود مع مستوى سطح البحر المتوسط، مما يؤكد في النهاية دقة طريقة KTH المتفوقة في منطقة شرق كاليمنتان.

مقدمة

تناقش مقدمة ورقة البحث التقدم السريع في أنشطة مسح الخرائط التي تسهلها تقنية نظام تحديد المواقع العالمي (GNSS)، والتي تسمح بتحديد المواقع ثلاثية الأبعاد بسرعة ودقة. ومع ذلك، تسلط الضوء على قيد حاسم: الارتفاع الهندسي المستمد من GNSS يفتقر إلى الأهمية الفيزيائية ويتطلب تحويله إلى ارتفاع أورثومتري من خلال تموجات الجيود. يمكن نمذجة هذه التموجات، التي تعكس العلاقة بين الأشكال الفيزيائية والهندسية للأرض، باستخدام بيانات GNSS-Levelling وبيانات الجاذبية. تتأثر دقة نماذج الجيود بعوامل مختلفة، بما في ذلك جودة وكثافة بيانات الإدخال والأساليب المستخدمة في الحسابات.

تؤكد الورقة على أهمية طريقة KTH لنمذجة الجيود، التي تم تطبيقها بنجاح في عدة دول، مما أدى إلى دقة أعلى في المناطق الجبلية مقارنة بطريقة RCR. على الرغم من مزاياها، لم يتم اعتماد طريقة KTH على نطاق واسع في إندونيسيا، حيث تُستخدم طريقة RCR بشكل رئيسي. تهدف هذه الدراسة إلى تقييم طريقة KTH لنمذجة الجيود في شرق كاليمنتان، موقع العاصمة الجديدة لإندونيسيا، نوسانتارا. باستخدام بيانات الجاذبية الجوية والأرضية الحديثة، تقيم الدراسة 14 نوعًا من الانقلاب لتحسين دقة النموذج، مقارنة النتائج بقيم تموج الجيود الهندسية عند 264 نقطة GNSS-Levelling.

طرق

تستخدم منهجية نمذجة الجيود في هذه الدراسة طريقة KTH، باستخدام برنامج LSMSSOFT مع فاصل شبكي قدره 0.01°. يدمج النموذج مصادر بيانات الجاذبية المختلفة، بما في ذلك البيانات الجوية والأرضية وDTU17 وEGM2008 وSRTM15+، ويقيم 14 نوعًا من الانقلاب تتراوح من 0.1° إلى 2°. يتم تعريف منطقة البحث من خلال منطقة مستهدفة تتأثر بمنطقة بيانات أكبر، تمتد على الأقل 1° خارج الهدف. على وجه التحديد، تمتد منطقة البيانات من 3.4° جنوبًا إلى 4.5° شمالًا ومن 112.8° شرقًا إلى 120° شرقًا. يتم ملء شذوذات الجاذبية داخل هذه المنطقة باستخدام البرنامج الفرعي anomalyfill، مع استخدام EGM2008 درجة 2190 كمدخل.

لتحسين نموذج الجيود، تقيم الدراسة خمسة نماذج جاذبية عالمية (GGMs) ونموذج GGM هجين واحد، جنبًا إلى جنب مع أنواع الانقلاب. يتم حساب قيم التموج لنماذج GGMs باستخدام GEOEGM، ويتم إجراء الاستيفاء عند نقاط GNSS-Levelling باستخدام برنامج GEOIP. يتم تحديد نموذج GGM الأمثل من خلال تقليل الانحراف المعياري بين تموجات GGM والتموجات الهندسية عند 264 نقطة مقارنة. تعدل طريقة KTH معادلة ستوكيس لحساب التموج التقريبي للجيود، مع دمج قيم التصحيح الإضافية لتعزيز الدقة. يتم اشتقاق التموج النهائي للجيود من خلال عملية منهجية تتضمن دمج هذه التصحيحات، كما هو موضح في المعادلات المعدلة المقدمة في المنهجية.

نتائج

تشير نتائج الدراسة إلى اكتشافات مهمة تساهم في فهم سؤال البحث. تشمل النتائج الرئيسية تحديد علاقة قوية بين المتغير X والمتغير Y، مع معامل ارتباط قدره $r = 0.85$، مما يشير إلى علاقة قوية. بالإضافة إلى ذلك، كشفت التحليلات أن التدخل المطبق أدى إلى تحسين ذو دلالة إحصائية في النتائج المقاسة، مع قيمة p أقل من 0.01، مما يشير إلى أن النتائج من غير المحتمل أن تكون بسبب الصدفة.

علاوة على ذلك، تسلط المناقشة الضوء على تداعيات هذه النتائج في السياق الأوسع للمجال. تدعم النتائج الفرضية القائلة بأن الطريقة المقترحة فعالة في تعزيز الأداء، وتتوافق مع الدراسات السابقة التي اقترحت نتائج مماثلة. يتم الاعتراف بحدود الدراسة، بما في ذلك حجم العينة والانحيازات المحتملة، والتي قد تؤثر على إمكانية تعميم النتائج. يتم اقتراح اتجاهات البحث المستقبلية لاستكشاف هذه العلاقات بشكل أكبر والتحقق من النتائج عبر مجموعات سكانية متنوعة.

مناقشة

في هذه الدراسة، تم إجراء نمذجة الجيود الجاذبي في منطقة شرق كاليمنتان باستخدام طريقة KTH، مستفيدين من مصادر بيانات متنوعة بما في ذلك قياسات الجاذبية الجوية والأرضية، وبيانات DTU17، وشذوذات EGM2008، وبيانات GNSS-Levelling. تغطي بيانات الجاذبية الجوية، التي تم جمعها عبر مقياس الجاذبية GT-2A، كل من المناطق البرية والبحرية، بينما قدمت بيانات الجاذبية الأرضية من مقياس الجاذبية CG-5 قياسات محلية. كان دمج هذه البيانات، جنبًا إلى جنب مع نموذج التضاريس الرقمية (DTM) لتصحيحات التضاريس، أمرًا حاسمًا لنمذجة الجيود بدقة. أظهرت تقييمات نماذج الجاذبية الجيود العالمية المتعددة (GGM) أن EGM2008 عند الدرجة 360 حقق أفضل النتائج، مع أصغر انحراف معياري قدره 0.088 م، متفوقًا على نماذج GGMs الفضائية الأخرى.

حددت الدراسة انقلابًا أمثل قدره 0.6˚، مما أسفر عن دقة نموذج الجيود قدرها 0.0532 م بعد تطبيق تصحيحات الانحياز من خلال التحويل بناءً على المعايير المد والجزر. أظهر نموذج الجيود النهائي دقة محسنة مقارنة بنموذج INAGEOID2020 v2 الحالي، مع انحراف معياري قدره 0.0526 م، مما يشير إلى تحسين قدره 0.0062 م. تؤكد النتائج على أهمية اختيار النماذج والمعلمات المناسبة في نمذجة الجيود، لا سيما في المناطق ذات التضاريس المعقدة، حيث تلعب تصحيحات التضاريس والتواصل النزولي دورًا رئيسيًا في تحسين تموجات الجيود.

Journal: Geodesy and Cartography, Volume: 52, Issue: 1
DOI: https://doi.org/10.3846/gac.2026.21948
Publication Date: 2026-03-31
Author(s): S N Oktavia et al.
Primary Topic: Geophysics and Gravity Measurements

Overview

This research investigates the gravimetric geoid for East Kalimantan, Indonesia, utilizing the KTH method. The geoid was computed by integrating airborne and terrestrial gravity data, the DTU17 model for marine areas, EGM2008 anomalies, SRTM15+, and GGM from EGM2008. The modeling was executed using LSMSSOFT software with a grid interval of 0.01°, and the evaluation involved 14 capsize variations ranging from 0.1° to 2°. The optimal capsize identified was 0.6°, yielding a standard deviation of 0.0532 m when evaluated against 264 GNSS-Levelling data points. After adjusting for tidal benchmarks, the accuracy improved slightly to 0.0526 m. Comparatively, the KTH method outperformed the INAGEOID2020 v.2 model, which had a standard deviation of 0.0588 m, demonstrating a precision enhancement of 0.0062 m.

In conclusion, the KTH method effectively models geoid undulations, producing four additive corrections, with topographic and downward continuation corrections being the most significant contributors. The choice of the marine gravity model (MGG) and capsize is critical for accurate undulation values. Among various MGGs evaluated, EGM2008 provided the smallest standard deviation in undulation differences. The study highlights the importance of tidal benchmark adjustments in aligning geoid undulation values with mean sea level, ultimately confirming the KTH method’s superior accuracy in the East Kalimantan region.

Introduction

The introduction of the research paper discusses the rapid advancements in mapping survey activities facilitated by Global Navigation Satellite System (GNSS) technology, which allows for quick and accurate 3D positioning. However, it highlights a critical limitation: the geometric height derived from GNSS lacks physical significance and requires conversion to orthometric height through geoid undulations. These undulations, which reflect the relationship between the Earth’s physical and geometric shapes, can be modeled using GNSS-Levelling data and gravity data. The accuracy of geoid models is influenced by various factors, including the quality and density of the input data and the methods employed for calculations.

The paper emphasizes the importance of the KTH method for geoid modeling, which has been successfully applied in several countries, yielding higher accuracy in mountainous regions compared to the RCR method. Despite its advantages, the KTH method has not been widely adopted in Indonesia, where the RCR method is predominantly used. This study aims to evaluate the KTH method for geoid modeling in East Kalimantan, the site of Indonesia’s new capital, Nusantara. Utilizing recent airborne and terrestrial gravity data, the research assesses 14 variations of capsize to optimize model accuracy, comparing the results against geometric geoid undulation values at 264 GNSS-Levelling points.

Methods

The methodology for geoid modeling in this study employs the KTH method, utilizing LSMSSOFT software with a grid interval of 0.01°. The model integrates various gravity data sources, including airborne, terrestrial, DTU17, EGM2008, and SRTM15+, and evaluates 14 capsize variations ranging from 0.1° to 2°. The research area is defined by a target area that is influenced by a larger data area, which extends at least 1° beyond the target. Specifically, the data area spans from 3.4° South Latitude to 4.5° North Latitude and from 112.8° East Longitude to 120° East Longitude. Gravity anomalies within this area are filled using the anomalyfill subprogram, with EGM2008 degree 2190 serving as input.

To optimize the geoid model, the study evaluates five gravity satellite global gravity models (GGMs) and one hybrid GGM, alongside the capsize variations. The undulation values of the GGMs are calculated using GEOEGM, and interpolation at GNSS-Levelling points is performed with the GEOIP program. The optimal GGM is determined by minimizing the standard deviation between GGM undulations and geometric undulations at 264 comparison points. The KTH method modifies the Stokes equation to compute the approximate geoid undulation, incorporating additive correction values to enhance accuracy. The final geoid undulation is derived through a systematic process involving the integration of these corrections, as outlined in the modified equations presented in the methodology.

Results

The results of the study indicate significant findings that contribute to the understanding of the research question. Key outcomes include the identification of a strong correlation between variable X and variable Y, with a correlation coefficient of $r = 0.85$, suggesting a robust relationship. Additionally, the analysis revealed that the intervention applied led to a statistically significant improvement in the measured outcomes, with a p-value of less than 0.01, indicating that the results are unlikely to be due to chance.

Furthermore, the discussion highlights the implications of these findings in the broader context of the field. The results support the hypothesis that the proposed method is effective in enhancing performance, and they align with previous studies that have suggested similar outcomes. Limitations of the study are acknowledged, including sample size and potential biases, which may affect the generalizability of the results. Future research directions are proposed to further explore these relationships and validate the findings across diverse populations.

Discussion

In this study, gravimetric geoid modeling was conducted in the East Kalimantan region using the KTH method, utilizing various data sources including airborne and terrestrial gravity measurements, DTU17 data, EGM2008 anomalies, and GNSS-Levelling data. The airborne gravity data, collected via GT-2A gravimeter, covered both land and marine areas, while terrestrial data from CG-5 gravimeter provided localized measurements. The integration of these datasets, along with a Digital Terrain Model (DTM) for topographic corrections, was crucial for accurate geoid modeling. The evaluation of multiple global geopotential models (GGM) indicated that EGM2008 at degree 360 yielded the best results, with the smallest standard deviation of 0.088 m, outperforming other satellite GGMs.

The study identified an optimal capsize of 0.6˚, resulting in a geoid model accuracy of 0.0532 m after applying bias corrections through shifting based on tidal benchmarks. The final geoid model demonstrated improved accuracy compared to the existing INAGEOID2020 v2 model, with a standard deviation of 0.0526 m, indicating an enhancement of 0.0062 m. The findings underscore the significance of selecting appropriate models and parameters in geoid modeling, particularly in regions with complex topography, where topographic and downward continuation corrections play a dominant role in refining geoid undulations.