هندسة الفراغات الديناميكية للم ligands تدفع ثنائية المعادن من أجل أكسدة اليوريا بكفاءة Dynamic ligand-vacancy engineering drives metal dimerization for efficient urea electrooxidation

شارك:
المجلة: Nature Communications، المجلد: 17، العدد: 1
DOI: https://doi.org/10.1038/s41467-026-70919-w
PMID: https://pubmed.ncbi.nlm.nih.gov/41872232
تاريخ النشر: 2026-03-23
المؤلف: Mingjie Wu وآخرون
الموضوع الرئيسي: المحفزات الكهربائية لتحويل الطاقة

نظرة عامة

تقدم تفاعل أكسدة اليوريا الكهروكيميائية طريقًا واعدًا لتوليد الهيدروجين وإعادة تدوير النيتروجين، ومع ذلك فإن عدم استقرار المحفز بسبب إعادة بناء السطح يشكل تحديات كبيرة. تقدم هذه الدراسة استراتيجية شغور-رابطة غير متجانسة تعزز كل من التنشيط الحفزي والاستقرار الهيكلي من خلال تحسين ذاتي على المستوى الذري. من خلال استخدام أطر ثنائية المعدن المخدرة بالحديد، أنشأ المؤلفون بيئة تنسيق ذاتية التكيف تسهل توليد شغور الرابطة القابلة للتحكم وتعزز ثنائية المعدن، مما يقلل بشكل فعال من المسافات بين الذرات.

يعرض المحفز المطور جهدًا منخفضًا قدره 1.222 فولت عند 10 مللي أمبير سم\(^{-2}\)، وهو أقل بمقدار 188 مللي فولت من IrO\(_2\)، ويحقق كفاءة فارادائية مثيرة للإعجاب تبلغ 87.7% لأكاسيد النيتروجين. تشير التحليلات الطيفية والحسابات النظرية إلى أن الهيكل الناقص للرابطة يقلل بشكل كبير من طاقة انقسام C-N من 1.33 إلكترون فولت إلى 0.75 إلكترون فولت، مما يحول الخطوة المحددة للسرعة من انقسام C-N الكيميائي إلى أكسدة *NO المعتمدة على الجهد، مما يقلل من متطلبات الطاقة الإجمالية. علاوة على ذلك، في الإلكتروليزرات على نطاق صناعي، يحافظ المحفز على كثافة تيار قدرها 1 أمبير سم\(^{-2}\) لمدة 100 ساعة مع الحد الأدنى من التدهور، مما يؤدي إلى توفير طاقة بنسبة 13% مقارنة بأساليب تقسيم الماء التقليدية. توضح هذه الأبحاث آلية تحويل شغور-رابطة ديناميكية، مما يوفر رؤى قيمة لتصميم المحفزات الكهربائية التكيفية التي تهدف إلى حلول الطاقة المستدامة.

مقدمة

تناقش مقدمة ورقة البحث إمكانيات التحليل الكهربائي للماء القلوي كطريقة مستدامة لإنتاج الهيدروجين، خاصة عند اقترانها بمصادر الطاقة المتجددة. أحد التحديات الكبيرة في هذه العملية هو الحركية البطيئة لتفاعل تطور الأكسجين (OER)، مما يتطلب جهدًا مرتفعًا ويقلل من كفاءة الطاقة. بالمقابل، يوفر تفاعل أكسدة اليوريا (UOR) بديلاً أكثر ملاءمة بسبب جهد الأكسدة النظري المنخفض (0.37 فولت مقابل RHE) مقارنةً بـ OER (1.23 فولت مقابل RHE). إن وفرة اليوريا في مختلف مجاري النفايات، جنبًا إلى جنب مع سمّيتها المنخفضة وفعاليتها من حيث التكلفة، تجعل UOR مرشحًا قابلاً للتطبيق لدمج إنتاج الهيدروجين مع معالجة مياه الصرف، متماشيًا مع مبادئ الاقتصاد الدائري.

على الرغم من مزايا UOR، تواجه المحفزات المعدنية النبيلة الحالية قيودًا كبيرة، بما في ذلك الندرة، والتكاليف العالية، وضعف المتانة، مما يعيق قابليتها للتوسع. تؤكد الورقة على الحاجة إلى محفزات معدنية غير ثمينة تظهر نشاطًا واستقرارًا عاليين. تم تسليط الضوء على الأطر العضوية المعدنية (MOFs) كمرشحين واعدين بسبب هياكلها القابلة للتعديل ومواقعها النشطة المتعددة. ومع ذلك، فإن الحفاظ على سلامتها الهيكلية تحت ظروف قاسية لا يزال يمثل تحديًا، حيث يمكن أن تتدهور الروابط التنسيقية، مما يؤدي إلى تحولات لا رجعة فيها. يقترح المؤلفون استراتيجية شغور-رابطة غير متجانسة جديدة لتعزيز أداء محفزات MOF الكهربائية، من خلال تخدير الحديد في أطر المعادن الأحادية الكوبالت (CoSMF). تتيح هذه الطريقة توليد شغور الرابطة الانتقائية مع الحفاظ على السلامة الهيكلية، مما يؤدي إلى المحفز الأمثل DR-FeCoBMF، الذي يظهر أداءً تنافسيًا واستقرارًا في UOR، متفوقًا على العديد من المحفزات الحالية، بما في ذلك المراجع المعدنية النبيلة. تؤكد هذه الأبحاث على أهمية شغور الرابطة في ديناميات MOF وتقدم مبدأ تصميم جديد للمحفزات الكهربائية القوية في تطبيقات الطاقة المستدامة.

طرق

في هذا القسم، يصف المؤلفون الطرق المستخدمة للتحقيق في تأثير شغور الرابطة على أداء الأطر العضوية المعدنية القائمة على الديكاربوكسيليت العطرية (MOFs) في سياق تفاعل أكسدة اليوريا (UOR). استخدموا حسابات نظرية الوظائف الكثافة (DFT) لنمذجة التغيرات الهيكلية الناتجة عن شغور الرابطة، مع التركيز على MOFs ثنائية المعدن FeCo. كشفت تحليلات DFT أن إزالة الرابطة الانتقائية أدت إلى تقليل كبير في المسافة بين المعادن (من 3.57 Å إلى 2.80 Å) وسهلت الربط المباشر بين المعادن، مما استقر الهيكل الإلكتروني وزاد من ثنائية المعدن دون تغيير الطوبولوجيا الأصلية لـ MOF.

تم تحقيق تخليق المحفزات من خلال طريقة حل حراري، باستخدام رغوة النيكل المعالجة مسبقًا المغمورة في محلول من أملاح المعادن والرابطة. أظهر FeCoBMF الناتج شكل نانو ورقي متعدد الطبقات وتوزيعًا متجانسًا للعناصر، تم تأكيده بواسطة المجهر الإلكتروني الماسح (SEM) وطيف الأشعة السينية المشتتة للطاقة (EDX). تم تقييم الأداء الكهروكيميائي باستخدام قياس الجهد الخطي في محلول KOH + اليوريا، كاشفًا أن FeCoBMF أظهر انخفاضًا ملحوظًا في الجهد الزائد (120 مللي فولت عند 100 مللي أمبير سم$^{-2}$) بعد إعادة البناء الديناميكية، مما يشير إلى أن وجود شغور الرابطة يعزز بشكل كبير الأداء الحفزي مقارنةً بالأطر الأخرى التي تم تخليقها.

نقاش

يتناول قسم النقاش في ورقة البحث إعادة البناء الديناميكية للمحفزات، مع التركيز بشكل خاص على دور أزواج الذرات غير المتجانسة في تعزيز الأداء الحفزي وإدارة تسرب الرابطة. باستخدام المجهر الإلكتروني الماسح ذو الانبعاث الميداني (FESEM) والمجهر الإلكتروني الناقل عالي الدقة (HRTEM)، تكشف الدراسة أن المحفزات القائمة على الحديد (FeSMF) تحافظ على هيكل مستقر مع تطور ضئيل أثناء التحليل الكهربائي، بينما تظهر المحفزات القائمة على الكوبالت (CoSMF) تدهورًا هيكليًا كبيرًا. تشير النتائج إلى أن استقرار روابط الحديد-الكربوكسيلات يساهم في الحفاظ على إطار المحفز، بينما تكون روابط الكوبالت-الكربوكسيلات أكثر عرضة للانقسام المائي، مما يؤدي إلى شغور الرابطة الذي يسهل ثنائية المعدن.

تؤكد التحليلات الإضافية، بما في ذلك طيف رامان وطيف الإلكترون الضوئي للأشعة السينية (XPS)، أنه بينما يحتفظ FeSMF وFeCoBMF بهياكل روابطهما بعد إعادة البناء، فإن CoSMF يعاني من فقدان كبير للرابطة، مما يؤدي إلى انهيار هيكلي لا رجعة فيه. تبرز الدراسة أهمية الاختلافات في استقرار الروابط الداخلية بين أيونات الحديد والكوبالت، والتي تدعم الانقسام الانتقائي لروابط Co-O وتشكيل روابط معدنية-معدنية تعزز النشاط الحفزي. أداء FeCoBMF المحفز المعاد بناؤه ديناميكيًا متفوق بشكل ملحوظ، حيث يحقق جهود بدء أقل وكثافات تيار أعلى لتفاعلات أكسدة اليوريا (UOR) مقارنةً بنظيره الذي يحتوي على الكوبالت فقط، مما يظهر فعالية استراتيجية شغور-رابطة غير المتجانسة في تحسين الأداء الكهروكيميائي.

Journal: Nature Communications, Volume: 17, Issue: 1
DOI: https://doi.org/10.1038/s41467-026-70919-w
PMID: https://pubmed.ncbi.nlm.nih.gov/41872232
Publication Date: 2026-03-23
Author(s): Mingjie Wu et al.
Primary Topic: Electrocatalysts for Energy Conversion

Overview

The electrochemical urea oxidation reaction presents a promising avenue for hydrogen generation and nitrogen recycling, yet catalyst instability due to surface reconstruction poses significant challenges. This study introduces a heteronuclear vacancy-to-bond strategy that enhances both catalytic activation and structural stability through atomic-level self-optimization. By utilizing Fe-doped bimetallic frameworks, the authors create a self-adaptive coordination microenvironment that facilitates the dynamic generation of controllable ligand vacancies and promotes metal dimerization, effectively reducing interatomic distances.

The developed catalyst exhibits a low potential of 1.222 V at 10 mA cm\(^{-2}\), which is 188 mV lower than that of IrO\(_2\), and achieves an impressive 87.7% Faradaic efficiency for nitrogen oxides. Spectroscopic analyses and theoretical calculations indicate that the ligand-deficient structure significantly lowers the C-N cleavage energy from 1.33 eV to 0.75 eV, shifting the rate-determining step from chemical C-N cleavage to potential-dependent *NO oxygenation, thereby reducing the overall energy requirement. Furthermore, in industrial-scale electrolyzers, the catalyst maintains a current density of 1 A cm\(^{-2}\) for 100 hours with minimal degradation, resulting in a 13% energy savings compared to traditional water splitting methods. This research elucidates a dynamic vacancy-to-bond conversion mechanism, providing valuable insights for the design of adaptive electrocatalysts aimed at sustainable energy solutions.

Introduction

The introduction of the research paper discusses the potential of alkaline water electrolysis as a sustainable method for hydrogen production, particularly when paired with renewable energy sources. A significant challenge in this process is the sluggish kinetics of the oxygen evolution reaction (OER), which necessitates high overpotentials and reduces energy efficiency. In contrast, the urea oxidation reaction (UOR) offers a more favorable alternative due to its lower theoretical oxidation potential (0.37 V vs. RHE) compared to OER (1.23 V vs. RHE). Urea’s abundance in various waste streams, combined with its low toxicity and cost-effectiveness, positions UOR as a viable candidate for integrating hydrogen production with wastewater treatment, aligning with circular economy principles.

Despite the advantages of UOR, existing noble metal catalysts face significant limitations, including scarcity, high costs, and poor durability, which hinder their scalability. The paper emphasizes the need for non-precious metal catalysts that exhibit high activity and stability. Metal-organic frameworks (MOFs) are highlighted as promising candidates due to their tunable structures and multiple active sites. However, maintaining their structural integrity under harsh conditions remains a challenge, as coordination bonds can degrade, leading to irreversible transformations. The authors propose a novel heteronuclear vacancy-to-bond strategy to enhance the performance of MOF electrocatalysts, specifically through Fe doping in cobalt single-metal frameworks (CoSMF). This approach allows for selective ligand vacancy generation while preserving structural integrity, resulting in the optimized DR-FeCoBMF catalyst, which demonstrates competitive UOR performance and stability, outperforming many existing catalysts, including noble-metal references. This research underscores the importance of ligand vacancies in MOF dynamics and introduces a new design principle for robust electrocatalysts in sustainable energy applications.

Methods

In this section, the authors describe the methods employed to investigate the impact of ligand vacancies on the performance of aromatic dicarboxylate-based metal-organic frameworks (MOFs) in the context of the urea oxidation reaction (UOR). They utilized density functional theory (DFT) calculations to model the structural changes induced by ligand vacancies, focusing on bimetallic FeCo-MOFs. The DFT analysis revealed that selective ligand removal led to a significant reduction in intermetal distance (from 3.57 Å to 2.80 Å) and facilitated direct metal-metal bonding, which stabilized the electronic structure and enhanced dimerization without altering the original MOF topology.

The synthesis of the catalysts was achieved through a solvothermal method, using pretreated nickel foam immersed in a solution of metal salts and ligands. The resulting FeCoBMF exhibited a layered nanosheet morphology and uniform elemental distribution, confirmed by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The electrochemical performance was evaluated using linear sweep voltammetry in a KOH + urea solution, revealing that the FeCoBMF demonstrated a notable reduction in overpotential (120 mV at 100 mA cm$^{-2}$) after dynamic reconstruction, indicating that the presence of ligand vacancies significantly enhances catalytic performance compared to the other synthesized frameworks.

Discussion

The discussion section of the research paper delves into the dynamic reconstruction of catalysts, particularly focusing on the role of heteronuclear atomic pairs in enhancing catalytic performance and managing ligand leaching. Utilizing field-emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HRTEM), the study reveals that Fe-based catalysts (FeSMF) maintain a stable structure with minimal evolution during electrocatalysis, while cobalt-based catalysts (CoSMF) exhibit significant structural degradation. The findings indicate that the stability of Fe-carboxylate bonds contributes to the preservation of the catalyst framework, whereas Co-carboxylate bonds are more prone to hydrolytic cleavage, leading to ligand vacancies that facilitate metal dimerization.

Further analyses, including Raman spectroscopy and X-ray photoelectron spectroscopy (XPS), confirm that while FeSMF and FeCoBMF retain their ligand structures post-reconstruction, CoSMF experiences extensive ligand loss, resulting in irreversible structural collapse. The study highlights the importance of the intrinsic bond stability differences between Fe and Co ions, which underpins the selective cleavage of Co-O bonds and the formation of metal-metal bonds that enhance catalytic activity. The electrochemical performance of the dynamically reconstructed FeCoBMF catalyst is notably superior, achieving lower onset potentials and higher current densities for urea oxidation reactions (UOR) compared to its Co-only counterpart, demonstrating the effectiveness of the heteronuclear vacancy-to-bond strategy in optimizing electrocatalytic performance.