Ti 3 C 2 T z MXene المدعمة بالحديد والمخدرة بالنيتروجين لتفاعل اختزال الأكسجين القلوي Fe-functionalised N-doped Ti 3 C 2 T z MXene for the alkaline oxygen reduction reaction

شارك:
المجلة: Energy Advances، المجلد: 5، العدد: 4
DOI: https://doi.org/10.1039/d5ya00371g
تاريخ النشر: 2026-01-01
المؤلف: Luc Bouscarrat وآخرون
الموضوع الرئيسي: المحفزات الكهربائية لتحويل الطاقة

نظرة عامة

تبحث هذه الدراسة في إمكانيات خلايا الوقود القلوية، مع التركيز بشكل خاص على المحفزات Fe-N-C المدعومة بـ MXenes، لتعزيز أداء تفاعل اختزال الأكسجين (ORR). تسلط الدراسة الضوء على استخدام Ti$_3$C$_2$T$_z$ MXene المدمج مع أنواع الحديد واليوريا، مما يسهل تكوين أنواع الكربون المفيدة لـ ORR. تم توصيف المواد المُركبة باستخدام تقنيات متنوعة، مما كشف أن العينة Ti$_3$C$_2$-U50-Fe-800 أظهرت أداءً استثنائيًا في ORR في 0.1 M KOH، مع جهد بدء قدره 0.93 فولت مقابل RHE وانحدار Tafel قدره 66 مللي فولت دك$^{-1}$، إلى جانب استقرار ملحوظ على مدى 2000 دورة.

تشير النتائج إلى أن إدخال FeCl$_3$ واليوريا يعزز النشاط التحفيزي من خلال تعزيز تكوين أنواع الكربون وهياكل Fe-N-C على دعم MXene. تساهم الزيادة في مساحة السطح لـ MXenes المعدلة، الناتجة عن تحلل اليوريا ووجود أنواع الحديد، في تحسين نشاط ORR. بالإضافة إلى ذلك، تؤدي مورفولوجيا المواد، المتأثرة بمحتوى اليوريا، إلى نمو هياكل أنابيب الكربون (CNT) وألياف الكربون النانوية (CNF)، مما يعزز الأداء التحفيزي بشكل أكبر. بشكل عام، توضح الدراسة فعالية الهياكل المعتمدة على MXene في تحقيق محفزات عالية الأداء لخلايا الوقود القلوية.

مقدمة

تسلط مقدمة ورقة البحث الضوء على الحاجة الملحة للانتقال من أنظمة الطاقة المعتمدة على الوقود الأحفوري، التي تمثل حاليًا 80% من الطلب العالمي على الطاقة الأولية، بسبب آثارها البيئية الضارة، بما في ذلك تغير المناخ وتدمير النظام البيئي. استجابةً لذلك، هناك التزام متزايد بالتقنيات منخفضة الكربون، حيث يظهر الهيدروجين كمرشح واعد لإزالة الكربون من مختلف القطاعات بسبب كثافته العالية من الطاقة وخصائص احتراقه النظيفة. ومع ذلك، فإن التكاليف العالية المرتبطة بتقنيات الهيدروجين، وخاصة خلايا الوقود، تشكل تحديات كبيرة. تؤكد الورقة على إمكانيات خلايا الوقود القلوية، التي يمكن أن تستخدم محفزات غير ثمينة، مما يقلل التكاليف مقارنةً بالأنظمة التقليدية المعتمدة على البلاتين.

تناقش هذه القسم أيضًا أهمية تحسين تفاعل اختزال الأكسجين (ORR) في خلايا الوقود، حيث إنه العامل المحدد في كفاءتها. أظهرت التطورات الأخيرة في المحفزات الكهربائية، وخاصة تلك المعتمدة على هياكل الكربون المدعومة بالنيتروجين (M-N-C) وMXenes، أداءً واعدًا في تسهيل ORR. تقترح الدراسة نهجًا جديدًا يتضمن إدخال سلف حديدي واليوريا داخل طبقات MXene، بهدف تعزيز نشاط ORR من خلال تكوين أنواع الحديد والمركبات الكربونية. تسعى هذه الاستراتيجية للاستفادة من الخصائص الفريدة لـ MXenes لتحسين أداء خلايا الوقود القلوية مع تجنب الاعتماد على المعادن الثمينة المكلفة.

طرق

توضح القسم التجريبي من ورقة البحث المنهجيات المستخدمة للتحقيق في الأسئلة البحثية المطروحة. تتفصل في تصميم التجارب، بما في ذلك اختيار المواد، وإعداد الأجهزة، والإجراءات المتبعة لضمان قابلية التكرار وموثوقية النتائج. يتم إعطاء اهتمام خاص للمتغيرات الضابطة والأساليب الإحصائية المستخدمة في تحليل البيانات، والتي تعتبر حاسمة للتحقق من النتائج.

بالإضافة إلى ذلك، قد يصف القسم حجم العينة ومعايير اختيار المشاركين، إذا كان ذلك مناسبًا، فضلاً عن أي اعتبارات أخلاقية تم أخذها في الاعتبار خلال عملية التجريب. من المتوقع أن تساهم النتائج التي تم الحصول عليها من هذه التجارب بشكل كبير في فهم الظواهر قيد الدراسة، مما يوفر إطارًا قويًا للبحوث المستقبلية.

نتائج

تركز نتائج الدراسة على إدخال سلف حديدي (FeCl₃) واليوريا بين طبقات MXene، تليها معالجة حرارية، لتعزيز الأداء التحفيزي لتفاعل اختزال الأكسجين (ORR) في وسط قلوى. تم إجراء التحليل باستخدام حيود الأشعة السينية بالمسحوق (PXRD)، مما كشف عن تكوين أنواع الحديد مثل Fe₃C وα-Fe، حيث أظهرت العينة C-U50-Fe-800 قمم مميزة تعكس هذه المراحل. تشير وجود قمم إضافية إلى تكوين كربون غير متبلور وتدل على أن MXenes ظلت مستقرة دون أكسدة إلى TiO₂. تشير نسب شدة القمم الحديدية المتفاوتة عبر العينات إلى اعتمادها على محتوى اليوريا ونوع الدعم، حيث أكد تحليل Rietveld أعلى نسبة من Fe₃C في عينة XC72R بسبب توفر الكربون الأكبر.

كما تم تحديد أنواع Fe-Nₓ من خلال التحليل باستخدام مطيافية Mössbauer، المنسوبة إلى مواد الكربون المدعومة بالنيتروجين، إلى جانب المراحل الحديدية المذكورة سابقًا. كما سلطت الدراسة الضوء على تأثير طبقات MXene في منع تكتل الحديد، مما يعزز تكوين وحدات Fe-Nₓ. كشف التحليل السطحي عبر مطيافية الأشعة السينية للألكترونات (XPS) عن هيمنة الكربون على سطح جميع العينات، مع كميات ملحوظة من الأكسجين والنيتروجين، وحديد متبقي ضئيل. تؤكد النتائج على أهمية كيمياء السطح في تحديد الاستقرار والخصائص الكهروكيميائية للمواد، مع آثار على تطبيقاتها في التحفيز.

مناقشة

في هذا القسم، يتم مناقشة تخليق وتوصيف Ti₃C₂Tₓ ومشتقاته، Ti₃C₂-U-Fe-800 وC-U50-Fe-800. تم تخليق Ti₃C₂Tₓ باستخدام طريقة حفر LiF-HCl، تليها عملية شطف دقيقة لتحقيق درجة حموضة محايدة. تم إعداد عينات Ti₃C₂-U-Fe-800 عن طريق خلط MXene مع اليوريا وFeCl₃·6H₂O، تليها معالجة حرارية لتعزيز كيمياء السطح وإمكانية إنشاء مسافات بين الطبقات من خلال تحلل اليوريا. تم استخدام تقنيات التوصيف بما في ذلك حيود الأشعة السينية بالمسحوق (PXRD)، مطيافية Mössbauer، المجهر الإلكتروني الماسح (SEM)، ومطيافية الأشعة السينية للألكترونات (XPS) لتحليل الخصائص الهيكلية والكيميائية للمواد المُركبة.

كشفت التوصيفات الكهروكيميائية أن المواد المُركبة تظهر نشاطًا واعدًا لتفاعل اختزال الأكسجين (ORR). كانت جهود البدء لـ Ti₃C₂-U10-Fe-800، Ti₃C₂-U50-Fe-800، وC-U50-Fe-800 أقل من تلك الخاصة بمحفز Pt/C التجاري، مما يشير إلى أداء تحفيزي متنوع. من الجدير بالذكر أن Ti₃C₂-U50-Fe-800 أظهر أفضل نشاط كهروكيميائي، المنسوب إلى تكوين وحدات Fe-Nₓ التي تعزز حركية ORR. تشير انحدارات Tafel المحسوبة من بيانات ORR إلى أن Ti₃C₂-U50-Fe-800 يعمل بآلية مشابهة لتلك الخاصة بـ Pt/C، حيث يكون انتقال الإلكترون الثاني هو العامل المحدد للسرعة، بينما أظهرت العينات الأخرى حركيات أكثر تعقيدًا. بشكل عام، تسلط النتائج الضوء على إمكانيات المواد المعتمدة على Ti₃C₂ كمحفزات فعالة لـ ORR، حيث تؤثر معايير التخليق بشكل كبير على أدائها الكهروكيميائي.

Journal: Energy Advances, Volume: 5, Issue: 4
DOI: https://doi.org/10.1039/d5ya00371g
Publication Date: 2026-01-01
Author(s): Luc Bouscarrat et al.
Primary Topic: Electrocatalysts for Energy Conversion

Overview

This research investigates the potential of alkaline fuel cells, particularly focusing on Fe-N-C catalysts supported by MXenes, to enhance the oxygen reduction reaction (ORR) performance. The study highlights the use of Ti$_3$C$_2$T$_z$ MXene intercalated with iron species and urea, which facilitates the formation of carbon species beneficial for ORR. The synthesized materials were characterized using various techniques, revealing that the sample Ti$_3$C$_2$-U50-Fe-800 exhibited exceptional ORR performance in 0.1 M KOH, with an onset potential of 0.93 V vs. RHE and a Tafel slope of 66 mV dec$^{-1}$, alongside notable stability over 2000 cycles.

The findings suggest that the introduction of FeCl$_3$ and urea enhances the catalytic activity by promoting the formation of carbon species and Fe-N-C structures on the MXene support. The increased surface area of the modified MXenes, attributed to the decomposition of urea and the presence of iron species, contributes to improved ORR activity. Additionally, the morphology of the materials, influenced by the urea content, leads to the growth of carbon nanotube (CNT) and carbon nanofiber (CNF) structures, further enhancing catalytic performance. Overall, the study demonstrates the effectiveness of MXene-based structures in achieving high-performance catalysts for alkaline fuel cells.

Introduction

The introduction of the research paper highlights the urgent need to transition from fossil fuel-dependent energy systems, which currently account for 80% of global primary energy demand, due to their detrimental environmental impacts, including climate change and ecosystem destruction. In response, there is a growing commitment to low-carbon technologies, with hydrogen emerging as a promising candidate for decarbonizing various sectors due to its high energy density and clean combustion properties. However, the high costs associated with hydrogen technologies, particularly fuel cells, pose significant challenges. The paper emphasizes the potential of alkaline fuel cells, which can utilize non-precious metal catalysts, thereby reducing costs compared to traditional platinum-based systems.

The section further discusses the importance of optimizing the oxygen reduction reaction (ORR) in fuel cells, as it is the limiting factor in their efficiency. Recent advancements in electrocatalysts, particularly those based on nitrogen-doped carbon (M-N-C) structures and MXenes, have shown promising performance in facilitating the ORR. The research proposes a novel approach that involves intercalating a ferrous precursor and urea within MXene layers, aiming to enhance ORR activity through the formation of iron species and carbon compounds. This strategy seeks to leverage the unique properties of MXenes to improve the performance of alkaline fuel cells while avoiding reliance on expensive platinum group metals.

Methods

The experimental section of the research paper outlines the methodologies employed to investigate the research questions posed. It details the design of the experiments, including the selection of materials, the setup of apparatus, and the procedures followed to ensure reproducibility and reliability of results. Specific attention is given to the control variables and the statistical methods used for data analysis, which are crucial for validating the findings.

Additionally, the section may describe the sample size and the criteria for participant selection, if applicable, as well as any ethical considerations taken into account during the experimentation process. The results obtained from these experiments are expected to contribute significantly to the understanding of the phenomena under study, providing a robust framework for future research.

Results

The results of the study focus on the intercalation of a Fe precursor (FeCl₃) and urea between MXene layers, followed by thermal annealing, to enhance the catalytic performance for the oxygen reduction reaction (ORR) in alkaline media. The analysis was conducted using powder X-ray diffraction (PXRD), revealing the formation of iron species such as Fe₃C and α-Fe, with the sample C-U50-Fe-800 exhibiting distinct peaks characteristic of these phases. The presence of additional peaks suggests the formation of amorphous carbon and indicates that the MXenes remained stable without oxidation to TiO₂. The varying intensity ratios of the Fe peaks across samples indicate a dependence on the urea content and support type, with Rietveld analysis confirming the highest proportion of Fe₃C in the XC72R sample due to greater carbon availability.

Further characterization through Mössbauer spectroscopy identified Fe-Nₓ species, attributed to nitrogen-doped carbon materials, alongside the previously noted iron phases. The study also highlighted the influence of MXene layers in preventing Fe agglomeration, thus promoting the formation of Fe-Nₓ moieties. Surface analysis via X-ray photoelectron spectroscopy (XPS) revealed a predominance of carbon on the surface of all samples, with notable amounts of oxygen and nitrogen, and minimal residual iron. The findings underscore the importance of surface chemistry in determining the stability and electrochemical properties of the materials, with implications for their application in catalysis.

Discussion

In this section, the synthesis and characterization of Ti₃C₂Tₓ and its derivatives, Ti₃C₂-U-Fe-800 and C-U50-Fe-800, are discussed. The Ti₃C₂Tₓ was synthesized using a LiF-HCl etching method, followed by a careful rinsing process to achieve a neutral pH. The Ti₃C₂-U-Fe-800 samples were prepared by mixing the MXene with urea and FeCl₃·6H₂O, followed by thermal treatment to enhance the surface chemistry and potentially create interlayer spacing through urea decomposition. Characterization techniques including powder X-ray diffraction (PXRD), Mössbauer spectroscopy, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) were employed to analyze the structural and chemical properties of the synthesized materials.

Electrochemical characterization revealed that the synthesized materials exhibit promising activity for the oxygen reduction reaction (ORR). The onset potentials for Ti₃C₂-U10-Fe-800, Ti₃C₂-U50-Fe-800, and C-U50-Fe-800 were lower than that of a commercial Pt/C benchmark catalyst, indicating varying catalytic performance. Notably, Ti₃C₂-U50-Fe-800 demonstrated the best electrochemical activity, attributed to the formation of Fe-Nₓ moieties that enhance ORR kinetics. The Tafel slopes calculated from the ORR data suggest that Ti₃C₂-U50-Fe-800 operates with a mechanism similar to that of Pt/C, where the second electron transfer is rate-limiting, while other samples exhibited more complex kinetics. Overall, the findings highlight the potential of Ti₃C₂-based materials as effective catalysts for ORR, with the synthesis parameters significantly influencing their electrochemical performance.