DOI: https://doi.org/10.1038/s40494-026-02579-4
تاريخ النشر: 2026-05-03
المؤلف: Šárka Msallamová وآخرون
الموضوع الرئيسي: تحليل مواد التراث الثقافي
نظرة عامة
تدرس هذه الدراسة آليات تدهور أنابيب الأورغن المكونة من محتوى منخفض من الرصاص، مع التركيز على التغيرات الهيكلية والكيميائية التي تحدث مع مرور الوقت. باستخدام تقنيات مثل المجهر الضوئي، والمجهر الإلكتروني الماسح مع التحليل الطيفي للطاقة (SEM/EDS)، والمجهر الإلكتروني الناقل مع التحليل الطيفي للطاقة (TEM/EDS)، حدد الباحثون المركبات بين الفلزات بما في ذلك Cu$_6$Sn$_5$، FeSn$_2$، Sn$_4$As$_3$، وجزيئات الرصاص داخل هيكل سبيكة SnPb.
تشير النتائج إلى أن السبب الرئيسي للتدهور هو التآكل الانتقائي للرصاص، الذي تفاقم بوجود المركبات العضوية المتطايرة (VOCs). بالإضافة إلى ذلك، تسلط الدراسة الضوء على ظاهرة آفة القصدير، وهي تحول هيكلي للقصدير يحدث عند درجات حرارة منخفضة، مما يساهم في عملية التدهور. ومن الجدير بالذكر أن تحليل TEM/EDS كشف عن وجود جزيئات α-القصدير مدفونة في مصفوفة β-القصدير عند درجة حرارة الغرفة، وهو اكتشاف لم يتم توثيقه سابقًا في أنابيب الأورغن التاريخية. تمثل هذه الملاحظة تقدمًا كبيرًا في فهم تدهور المواد في هذه الآلات.
مقدمة
تناقش مقدمة ورقة البحث تركيبة وسلامة أنابيب الأورغن الكنسية، التي تتكون أساسًا من سبيكة من القصدير والرصاص، والمعروفة باسم معدن الأورغن. يختلف محتوى الرصاص في هذه السبائك بشكل كبير، مما يؤثر على كل من الخصائص الميكانيكية ومقاومة التآكل للأنابيب. تجعل تركيزات الرصاص الأعلى الأنابيب أكثر عرضة للتآكل من الأحماض العضوية المتطايرة، وخاصة حمض الأسيتيك، الذي يتواجد بكثرة في بيئة الكنيسة بسبب الهياكل والأثاث الخشبي. تتفاقم عملية التآكل بسبب الرطوبة ودرجة الحرارة، مما يؤدي إلى تكوين أسيتات الرصاص غير المستقرة والهيدروسرسيت، خاصة في المناطق التي تتلامس مباشرة مع الخشب.
بالإضافة إلى ذلك، تسلط الورقة الضوء على تأثير درجة الحرارة على التحول الهيكلي للقصدير، والذي يمكن أن يؤدي إلى التفكك إذا كان محتوى الرصاص منخفضًا جدًا. يتأثر التحول من القصدير β إلى القصدير α بعناصر السبائك المختلفة والظروف البيئية، حيث يمكن أن تمنع أو تسرع إضافات معينة هذه العملية. تهدف الدراسة إلى التحقيق في تدهور أنابيب الأورغن الواجهة من كنيستين تشيكيتين، مع التركيز على تلك التي تحتوي على تركيزات منخفضة من الرصاص في سبيكتها القصديرية، لفهم أفضل للعوامل التي تساهم في تدهورها.
الطرق
في هذه الدراسة، تم تصنيف أنابيب الأورغن التاريخية من كنيستين للتحقيق في خصائصها المادية. تم الحصول على عينات تحمل تسميات الأنابيب 1-5 من كنيسة جميع القديسين في هيرمانكوفيتس، التي صنعت في الأصل لدير سانت كاترين في بريسلاو في عام 1701 وتم نقلها في عام 1811. بالإضافة إلى ذلك، تم تحليل عينة من كنيسة سانت باربرا في مانيتين، التي صنعت في عام 1721. أظهرت العينات أنماط تلف نموذجية، موثقة في الأشكال المرفقة.
لتحليل المواد، تم تضمين العينات في راتنجات الإيبوكسي وصقلها لإنهاء دقيق باستخدام أوراق كاشطة وتعليق أكسيد الألمنيوم. ثم تم حفرها باستخدام محلول كيميائي محدد. تم فحص الخصائص الهيكلية للسبائك المعدنية باستخدام مجهر معدني Nikon Eclipse MA 200 ومجهر إلكتروني ماسح TESCAN VEGA 3 LMU مزود بجهاز تحليل طيفي للطاقة (SEM/EDS). تم تحديد التركيب العنصري من خلال تقنيات مختلفة، بما في ذلك المجهر الإلكتروني الناقل (TEM/EDS) وطيف الامتصاص الذري (AAS). شملت تحضيرات العينات لـ TEM طحنها إلى رقائق معدنية وتلميع الأيونات، بينما تم إذابة عينات AAS في محلول حمضي مركز. تم إجراء قياسات تشتت الأشعة السينية بزاوية صغيرة جدًا (USAXS) في مصدر الفوتون المتقدم، باستخدام تقنيات تشتت الأشعة السينية المتعددة لجمع بيانات شاملة عن الأطوار الهيكلية للسبائك.
النتائج
كشفت تحليل أنابيب الواجهة أن جميع العينات تحتوي على تركيزات منخفضة من الرصاص، مصنفة إلى مجموعتين: تلك التي تحتوي على محتوى رصاص ≥ 0.11 wt.% (الأنابيب 1، 2، و5) وتلك التي تحتوي على محتوى رصاص ≤ 0.11 wt.% (الأنابيب 3، 4، ومانيتين). أظهر الفحص المعدني للمجموعة الأولى هيكلًا متسقًا مع تباينات شبيهة بالإبر وجزيئات كروية على طول حدود الحبوب، إلى جانب تلف تآكل كبير. أشار المجهر الإلكتروني الماسح/التحليل الطيفي للطاقة (SEM/EDS) إلى وجود مراحل بين الفلزات، بما في ذلك Cu₆Sn₅، Sn₄As₃، وFeSn₂، مع ملاحظات على اختلافات في منتجات التآكل بين الأنابيب. من الجدير بالذكر أن الأنابيب 1 و5 أظهرت تركيزات رصاص أعلى في منتجات تآكلها مقارنة بالأنبوب 2، الذي احتوى بشكل أساسي على أكاسيد القصدير.
في المقابل، أظهرت الأنابيب 3، 4، ومانيتين، التي تحتوي على محتوى رصاص أقل، هيكلًا متجانسًا من القصدير β مع تلف تآكل مرئي. اختلفت آليات التآكل، حيث تعرضت الأنابيب 1 و5 لتآكل رصاص انتقائي بسبب الأحماض العضوية المتطايرة، مما أدى إلى تدهور هيكلي كبير. أظهر الأنبوب 4، الذي كان يحتوي على محتوى رصاص معتدل، تباين مستمر للرصاص على طول حدود الحبوب، مما ساهم في ملفه الشخصي للتآكل. بالإضافة إلى ذلك، تم تحديد التحول الهيكلي من القصدير β إلى α عند درجات حرارة أقل من 13.2 °C في الأنابيب 4 ومانيتين، مما يشير إلى أن الظروف المناخية قد تكون أثرت على الحفاظ على مصفوفة القصدير. بشكل عام، تسلط الدراسة الضوء على التفاعل المعقد بين محتوى الرصاص، وجود مراحل بين الفلزات، والعوامل البيئية في سلوك التآكل لسبائك القصدير في أنابيب الأورغن.
DOI: https://doi.org/10.1038/s40494-026-02579-4
Publication Date: 2026-05-03
Author(s): Šárka Msallamová et al.
Primary Topic: Cultural Heritage Materials Analysis
Overview
This study examines the degradation mechanisms of organ pipes composed of low lead content, focusing on the structural and chemical changes that occur over time. Utilizing techniques such as light optical microscopy, scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS), and transmission electron microscopy with energy-dispersive spectroscopy (TEM/EDS), the researchers identified intermetallic compounds including Cu$_6$Sn$_5$, FeSn$_2$, Sn$_4$As$_3$, and lead particles within the SnPb alloy structure.
The findings indicate that the primary cause of degradation is the selective corrosion of lead, exacerbated by the presence of volatile organic compounds (VOCs). Additionally, the study highlights the phenomenon of tin pest, a structural transformation of tin that occurs at low temperatures, contributing to the degradation process. Notably, the TEM/EDS analysis revealed the presence of α-tin particles embedded in a β-tin matrix at room temperature, a discovery that has not been previously documented in historical organ pipes. This observation marks a significant advancement in understanding the material degradation in these instruments.
Introduction
The introduction of the research paper discusses the composition and structural integrity of church organ pipes, which are primarily made from an alloy of tin and lead, known as organ metal. The lead content in these alloys varies significantly, influencing both the mechanical properties and corrosion resistance of the pipes. Higher lead concentrations make the pipes more susceptible to corrosion from volatile organic acids, particularly acetic acid, which is prevalent in the church environment due to wooden structures and furnishings. The corrosion process is exacerbated by humidity and temperature, leading to the formation of unstable lead acetate and hydrocerussite, particularly in areas of direct contact with wood.
Additionally, the paper highlights the impact of temperature on the structural transformation of tin, which can lead to disintegration if the lead content is too low. The transformation from tin β to tin α is influenced by various alloying elements and environmental conditions, with specific admixtures either inhibiting or accelerating this process. The study aims to investigate the degradation of façade organ pipes from two Czech churches, focusing on those with low lead concentrations in their tin alloy, to better understand the factors contributing to their deterioration.
Methods
In this study, historical organ pipes from two churches were characterized to investigate their material properties. Samples labeled Pipes 1-5 were sourced from the Church of All Saints in Heřmánkovice, originally crafted for the monastery of St. Catherine in Breslau in 1701 and relocated in 1811. Additionally, a sample from the Church of St. Barbara in Manětín, made in 1721, was also analyzed. The samples exhibited typical damage patterns, documented in accompanying figures.
For material analysis, the samples were embedded in epoxy resin and polished to a fine finish using abrasive papers and aluminum oxide suspension. They were subsequently etched with a specific chemical solution. The structural characteristics of the metal alloys were examined using a Nikon Eclipse MA 200 metallographic microscope and a TESCAN VEGA 3 LMU scanning electron microscope equipped with an energy dispersive spectrometer (SEM/EDS). Elemental composition was determined through various techniques, including transmission electron microscopy (TEM/EDS) and atomic absorption spectrometry (AAS). Sample preparation for TEM involved grinding to metal foils and ion polishing, while AAS samples were dissolved in a concentrated acid solution. Ultra-Small Angle X-ray Scattering (USAXS) measurements were conducted at the Advanced Photon Source, utilizing multiple X-ray scattering techniques to gather comprehensive data on the structural phases of the alloys.
Results
The analysis of façade pipes revealed that all samples contained low lead concentrations, categorized into two groups: those with lead content ≥ 0.11 wt.% (Pipes 1, 2, and 5) and those with lead content ≤ 0.11 wt.% (Pipes 3, 4, and Manětín). The metallographic examination of the first group showed a consistent structure with needle-like heterogeneities and spherical particles along grain boundaries, alongside significant corrosion damage. Scanning Electron Microscopy/Energy Dispersive Spectroscopy (SEM/EDS) indicated the presence of intermetallic phases, including Cu₆Sn₅, Sn₄As₃, and FeSn₂, with variations in corrosion products observed between the pipes. Notably, Pipes 1 and 5 exhibited higher lead concentrations in their corrosion products compared to Pipe 2, which primarily contained tin oxides.
In contrast, Pipes 3, 4, and Manětín, with lower lead content, displayed a homogeneous tin β structure with visible corrosion damage. The corrosion mechanisms differed, with Pipes 1 and 5 experiencing selective lead corrosion due to volatile organic acids, leading to significant structural degradation. Pipe 4, which had a moderate lead content, showed continuous lead segregation along grain boundaries, contributing to its corrosion profile. Additionally, the structural transformation of tin β to α at temperatures below 13.2 °C was identified in Pipes 4 and Manětín, suggesting that climatic conditions may have influenced the preservation of the tin matrix. Overall, the study highlights the complex interplay of lead content, intermetallic phase presence, and environmental factors in the corrosion behavior of tin alloys in organ pipes.
