اشتقاق نموذج تدفق سطحي متسق للسوائل اللزجة وتطبيقه على مشكلة كسر السد وتوقف التدفق Derivation of a consistent shallow-flow model for viscoplastic fluids and application to the dam-break problem and flow stoppage

شارك:
المجلة: Journal of Fluid Mechanics، المجلد: 1036
DOI: https://doi.org/10.1017/jfm.2026.11662
تاريخ النشر: 2026-06-10
المؤلف: Danila Denisenko وآخرون
الموضوع الرئيسي: دراسات الريولوجيا وديناميات السوائل

نظرة عامة

تقدم البحث نموذج تدفق ضحل مكون من ثلاث معادلات مصمم خصيصًا لسوائل هيرشل-بولكلي المتدفقة على سطح مائل. يتم اشتقاق هذا النموذج باستخدام طريقة حدودية صارمة تأخذ في الاعتبار الخصائص الريولوجية المعقدة للسائل، والتي تشمل كل من طبقة مشدودة، حيث يتجاوز المادة عتبة الانهيار، وطبقة صمغية، حيث تكون قريبة من الانهيار. يتكون النموذج من معادلات الحفاظ على الكتلة، وتوازن الزخم، وإنستروفيا، وهيكلها كنظام هايبرولي كامل مع مصطلحات مصدر الاسترخاء التي تلتقط بفعالية الظواهر مثل الجبهات الجافة وتوقف المادة. يكشف تحليل الاستقرار الخطي أن اللدونة لها تأثير مثبت، مما يتماشى جيدًا مع الملاحظات التجريبية.

تظهر المحاكاة العددية التي تستخدم مخطط غودونوف قدرة النموذج على تمثيل تكوينات التدفق المختلفة بدقة، بما في ذلك موجات التدحرج وسيناريوهات كسر السد. تشير النتائج إلى أن النموذج يلتقط بفعالية عتبة عدم الاستقرار وديناميات التدفقات اللدنة، خاصة في الظروف التي تكون فيها القصور الذاتي كبيرًا. تتوافق توقعات النموذج بشكل جيد مع البيانات التجريبية، على الرغم من أن التباينات عند زوايا الميل الصغيرة تشير إلى تأثيرات محتملة من احتكاك الجدران الجانبية أو الانزلاق القاعدي. يسلط البحث الضوء على مزايا النموذج مقارنة بالنماذج البسيطة للتشحيم، خاصة في قدرته على التنبؤ بتوقف السائل وقابليته للتكيف مع التمديدات المستقبلية للتدفقات ثلاثية الأبعاد. يتم اقتراح تحسينات إضافية، مثل دمج مصطلحات الانتشار والتضاريس غير المستوية، لتعزيز التطبيقات العملية للنموذج.

مقدمة

تناقش مقدمة الورقة سلوك السوائل اللدنة، التي تظهر خصائص شبيهة بالصلب تحت ضغط الانهيار وسلوك شبيه بالسائل فوقه. هذه السوائل شائعة في سياقات جيولوجية وبيولوجية متنوعة، فضلاً عن التطبيقات الهندسية. يركز المؤلفون على تدفقات السطح الحر للسوائل اللدنة المثالية على الأسطح المائلة، مؤكدين على الحاجة إلى نمذجة رياضية دقيقة، عادة باستخدام قوانين بingham أو هيرشل-بولكلي. يتم تسليط الضوء على التحديات التي تواجه المحاكاة العددية المباشرة بسبب المتطلبات الحاسوبية والحاجة إلى شبكات دقيقة بالقرب من أسطح الانهيار، مما يؤدي إلى النظر في نماذج ذات أبعاد مخفضة، وخاصة تقريبات الطبقات الرقيقة.

تنتقد الورقة النماذج الحالية ذات المعادلة الواحدة والمعادلتين لتدفق الضحل بسبب قيودها، خاصة من حيث توقعات عدم الاستقرار والتوافق مع نظرية العمل والطاقة. تشير إلى أنه بينما يمكن للنماذج ذات الثلاث معادلات معالجة هذه القضايا من خلال دمج توازن الكتلة والزخم والطاقة، فإن اشتقاق نماذج متسقة لسوائل هيرشل-بولكلي لا يزال معقدًا بسبب الطبيعة غير الخطية لريولوجيتها. يقترح المؤلفون نموذج تدفق ضحل جديد مكون من ثلاث معادلات يعتمد على تمديد تنسوري بديل لقانون هيرشل-بولكلي، والذي يهدف إلى توفير إطار رياضي قوي والتقاط ديناميات التدفقات اللدنة بدقة، بما في ذلك تأثيرات ضغط الانهيار والتخفيف الناتج عن القص. يحدد هيكل الورقة تطوير هذا النموذج وتطبيقاته على سيناريوهات التدفق المختلفة، بما في ذلك تجارب كسر السد.

مناقشة

في هذا القسم، يستقصي المؤلفون تدفقًا ثنائي الأبعاد مدفوعًا بالجاذبية لسائل لزج على سطح مائل، يتميز بتمديد تنسوري عام لقانون هيرشل-بولكلي. يقدم البحث موتر ضغط تعديلًا لا يتماشى مع موتر معدل التشوه، مما يسمح بتمثيل أكثر دقة لديناميات التدفق، خاصة في نظام التدفق الضحل. يتم اشتقاق المعادلات الحاكمة، بما في ذلك الحفاظ على الكتلة وتوازن الزخم، والتعبير عنها في شكل غير بعدي، مع دمج مجموعات غير بعدية ذات صلة مثل رقم رينولدز، ورقم فroud، ورقم بingham.

يؤكد المؤلفون على أهمية التوسعات الحدودية لاشتقاق نموذج تدفق ضحل مكون من ثلاث معادلات متسق، والذي يلتقط سلوك التدفق من الدرجة الأولى بينما يعالج التعقيدات التي تقدمها الطبيعة اللدنة للسائل. تم تصميم النموذج لأخذ توقف المادة في الاعتبار، وهو جانب حاسم من التدفقات اللدنة، من خلال تعديل المعاملات في المعادلات الحاكمة لضمان بقائها جيدة التصرف حتى عندما يقترب ارتفاع التدفق من سمك الصمغ. يسمح هذا النهج بإطار قوي يمكنه التنبؤ بسلوك التدفق تحت ظروف متنوعة، بما في ذلك الانتقال إلى نظام سائل ذو قانون قوة عندما تكون المادة مشدودة بشدة.

Journal: Journal of Fluid Mechanics, Volume: 1036
DOI: https://doi.org/10.1017/jfm.2026.11662
Publication Date: 2026-06-10
Author(s): Danila Denisenko et al.
Primary Topic: Rheology and Fluid Dynamics Studies

Overview

The research presents a three-equation shallow-flow model specifically designed for Herschel-Bulkley fluids flowing down an inclined plane. This model is derived using a rigorous asymptotic method that accounts for the complex rheological properties of the fluid, which includes both a sheared layer, where the material exceeds the yielding threshold, and a pseudoplug layer, where it is near yielding. The model consists of mass conservation, momentum balance, and enstrophy equations, structured as a fully hyperbolic system with relaxation source terms that effectively capture phenomena such as dry fronts and material stoppage. A linear stability analysis reveals that plasticity has a stabilizing effect, aligning well with experimental observations.

Numerical simulations employing a Godunov scheme demonstrate the model’s capability to accurately represent various flow configurations, including roll waves and dam-break scenarios. The findings indicate that the model effectively captures the instability threshold and the dynamics of viscoplastic flows, particularly under conditions where inertia is significant. The model’s predictions are in good agreement with experimental data, although discrepancies at small slope angles suggest potential influences from sidewall friction or basal slip. The research highlights the model’s advantages over simpler lubrication models, particularly in its ability to predict fluid stoppage and its adaptability for future extensions to three-dimensional flows. Further improvements, such as incorporating diffusion terms and uneven topography, are suggested to enhance practical applications of the model.

Introduction

The introduction of the paper discusses the behavior of viscoplastic fluids, which exhibit solid-like characteristics below a yield stress and fluid-like behavior above it. These fluids are prevalent in various geophysical and biological contexts, as well as in engineering applications. The authors focus on free-surface flows of idealized viscoplastic fluids on inclined planes, emphasizing the need for accurate mathematical modeling, typically using Bingham or Herschel-Bulkley constitutive laws. The challenges of direct numerical simulations due to computational demands and the need for fine meshes near yield surfaces are highlighted, leading to the consideration of reduced-dimensional models, particularly thin-layer approximations.

The paper critiques existing one-equation and two-equation shallow-flow models for their limitations, particularly in terms of instability predictions and compatibility with the work-energy theorem. It notes that while three-equation models can address these issues by incorporating mass, momentum, and energy balances, deriving consistent models for Herschel-Bulkley fluids remains complex due to the non-linear nature of their rheology. The authors propose a new three-equation shallow-flow model based on an alternative tensorial extension of the Herschel-Bulkley law, which aims to provide a robust mathematical framework and accurately capture the dynamics of viscoplastic flows, including the effects of yield stress and shear-thinning. The structure of the paper outlines the development of this model and its applications to various flow scenarios, including dam-break experiments.

Discussion

In this section, the authors investigate a two-dimensional gravity-driven flow of a viscoplastic fluid down an inclined plane, characterized by a generalized tensorial extension of the Herschel-Bulkley constitutive law. The study introduces a modified yield-stress tensor that does not align with the strain-rate tensor, allowing for a more accurate representation of the flow dynamics, particularly in the shallow-flow regime. The governing equations, including mass conservation and momentum balance, are derived and expressed in dimensionless form, incorporating relevant dimensionless groups such as the Reynolds number, Froude number, and Bingham number.

The authors emphasize the importance of asymptotic expansions to derive a consistent three-equation shallow-flow model, which captures the leading-order behavior of the flow while addressing the complexities introduced by the viscoplastic nature of the fluid. The model is designed to account for material stoppage, a critical aspect of viscoplastic flows, by modifying the coefficients in the governing equations to ensure they remain well-behaved even when the flow height approaches the thickness of the pseudoplug. This approach allows for a robust framework that can predict flow behavior under various conditions, including the transition to a power-law fluid regime when the material is highly sheared.