الاستقرار الطيفي لمصدري الفوتونات الفردية المعززة في السيليكون Spectral Stability of Cavity-Enhanced Single-Photon Emitters in Silicon

شارك:
المجلة: PRX Quantum، المجلد: 7، العدد: 2
DOI: https://doi.org/10.1103/b974-rt6f
تاريخ النشر: 2026-04-30
المؤلف: Johannes Früh وآخرون
الموضوع الرئيسي: البصريات الكمومية والتفاعلات الذرية

نظرة عامة

تسلط الأبحاث الضوء على مزايا استخدام السيليكون كمنصة أجهزة لمعالجة المعلومات الكمومية، خاصة من خلال دمج المنبعثات في رنانات فابري-بروت بدلاً من الرنانات النانوية التقليدية. يعالج هذا التحول مشكلة تقلبات تردد الانبعاث الضوئي، والتي يمكن أن تعيق تطوير التطبيقات الكمومية. من خلال استخدام رنانات فابري-بروت، تظهر الدراسة تقليصًا بمقدار خمسة أضعاف في عرض خط انتشار الطيف إلى 4.0(2) ميغاهرتز، ويعزى ذلك إلى حجم الوضع الضوئي الأكبر الذي يسمح بمسافة أكبر من أسطح البلورات وتركيزات منخفضة من الشوائب، مما يقلل من تلف البلورات وتفاعلات المنبعثات.

علاوة على ذلك، تشير الأبحاث إلى أن عدم الاستقرار الطيفي المتبقي يعود أساسًا إلى تقلبات المجال الكهربائي الناتجة عن الليزر، كما يتضح من الحسابات والتجارب التي أجريت على بلورات السيليكون المنقاة نظائريًا \(^{28}\text{Si}\). عند مقارنتها بجهاز نانوفوتوني، تعزز التكوين الجديد بشكل كبير من زمن التماسك الضوئي، حيث تحقق \(T_2 = 20(1) \, \mu s\) عند نفس الطاقة داخل التجويف. تعتبر هذه التقدمات حاسمة لتطوير واجهات الفوتون-سبين المستقرة طيفيًا في السيليكون، مع آثار واعدة على الشبكات الكمومية ومعالجة المعلومات الكمومية الموزعة.

مقدمة

تستعرض المقدمة الحاجة الملحة إلى وصلات كمومية فعالة في الشبكات الكمومية وأنظمة معالجة المعلومات الكمومية الموزعة، مع التأكيد على أهمية الكيوبتات الذاكرية ذات أوقات التماسك الطويلة. يتم استكشاف أنظمة متنوعة، بما في ذلك الذرات المحصورة والمنصات الصلبة مثل مراكز الشوائب النيتروجينية والشوائب من العناصر الأرضية النادرة. من بين هذه الأنظمة، تقدم المنبعثات الفردية القائمة على السيليكون وواجهات الفوتون-سبين، وخاصة تلك التي تستخدم الشوائب من الإربيوم، مزايا كبيرة من حيث القابلية للتوسع نظرًا لتوافق انتقالاتها الضوئية مع نطاقات فقدان الحد الأدنى من الألياف الضوئية وأوقات التماسك الطويلة للسبين.

على الرغم من هذه الفوائد، تواجه تطوير المنبعثات الفردية من السيليكون لتطبيقات الكم تحديات، خاصة في تحقيق واجهات فوتون-سبين عالية الكفاءة مع انبعاثات طيفية مستقرة. أظهرت الأجهزة الحالية عدم استقرار طيفي كبير، يعزى إلى عمليات انتشار طيفية ناتجة عن الليزر وعيوب في شبكة السيليكون. يقترح المؤلفون حلاً من خلال دمج غشاء سيليكون مشوب بالإربيوم في رنان فابري-بروت، مما يعزز تأثيرات بورسيل مع تقليل تأثير الضوضاء المتعلقة بالواجهة. يسمح هذا النهج بانبعاث فعال للفوتونات الفردية وتحسين الاستقرار الطيفي، كما يتضح من تقليل أوقات حياة المنبعثات والقدرة على معالجة المنبعثات الفردية ضمن حجم وضع أكبر، مما يسهل معالجة متعددة للشوائب. تهدف الدراسة إلى مقارنة هذه النتائج بشكل كمي مع الأجهزة النانوية السابقة والتحقيق في مصادر عدم الاستقرار الطيفي المتبقية.

طرق

في هذا القسم، يصف المؤلفون الإعداد التجريبي المستخدم للتحقيق في الاستقرار الطيفي للشوائب الفردية، وخاصة الأغشية السيليكونية المشوبة بالإربيوم المدمجة في رنان فابري-بروت عالي الدقة. يتم استخدام نوعين من الأغشية: واحدة مصنوعة من السيليكون المستخرج تجاريًا من منطقة الطفو (FZ) والأخرى من السيليكون المنقى نظائريًا \(^{28}\text{Si}\). يتم زرع الأغشية بالإربيوم بتركيز ذروة يبلغ \(10^{15} \, \text{cm}^{-3}\) باستخدام طاقات وجرعات محددة، تليها عملية تلدين بعد الزرع لتحقيق الخصائص الضوئية المرغوبة. يتضمن التصميم التجريبي جهاز تحكم في الاستقطاب، ومقسم شعاع لربط الضوء في الرنان، وكاشف فوتون فردي من سلك نانوي فائق التوصيل لقياسات الانبعاث.

يقدم المؤلفون تفاصيل عملية تصنيع الأغشية، بما في ذلك النقش الكيميائي والنقل إلى مرآة عازلة، مما يسمح بالتحقيق في المنبعثات الفردية من الإربيوم على مسافة أكبر من أقرب واجهة مقارنة بالدراسات السابقة. يتم تقييم خصائص الرنان عند درجة حرارة الغرفة وبعد ذلك عند درجات حرارة منخفضة، مع الإشارة إلى أن عرض خط الرنان يبلغ \(75(9) \, \text{MHz}\) لجهاز FZ و\(184(21) \, \text{MHz}\) لجهاز \(^{28}\text{Si}\)، مما يؤدي إلى عوامل جودة \(Q\) تبلغ \(2.6(0.3) \times 10^6\) و\(1.06(0.12) \times 10^6\) على التوالي. تتجاوز أحجام الأوضاع المحسوبة تلك الخاصة بالرنانات النانوية السابقة بمقدار ثلاثة أوامر من حيث الحجم، مما يؤدي إلى توقع عامل بورسيل \(P_{\text{theo}} = 4.4\) للمنبعثات عند أقصى مجال داخلي للموجة الثابتة، متأثرًا بشكل كبير بنسبة التفرع للانتقال الضوئي.

مناقشة

في هذا القسم، يناقش المؤلفون مصادر عدم الاستقرار الطيفي في الانتقالات الضوئية للمنبعثات المدمجة، مع التركيز بشكل خاص على السيليكون المشوب بالإربيوم (Er:Si). يحددون ثلاثة تأثيرات رئيسية تساهم في التحولات الطيفية: الاضطراب الثابت، الانتشار الطيفي، والتوسيع المتجانس. يؤدي الاضطراب الثابت إلى تحولات عشوائية في الطاقة بين المنبعثات، بينما يمكن أن يؤثر الانتشار الطيفي والتوسيع المتجانس سلبًا على التطبيقات الكمومية. يبرز المؤلفون أن الاضطراب الثابت يمكن التخفيف منه من خلال تقنيات مثل تغيير التردد أو الكشف الزمني، مما يمكن أن يعزز قدرات التعدد الطيفي. في المقابل، فإن الانتشار الطيفي والتوسيع المتجانس ضاران، مما يتطلب توصيفهما لعمليات كمومية فعالة.

يستخدم المؤلفون محاكاة مونت كارلو للتنبؤ بعرض خط الانتشار الطيفي الناتج عن التفاعلات مع الدوران النووي في السيليكون، مع التركيز بشكل خاص على النظير \(^{29}\text{Si}\). يجدون أن عرض الخط يتأثر بشكل كبير باتجاه المجالات المغناطيسية الخارجية، مع قيم تتراوح من 0.02 ميغاهرتز إلى 0.2 ميغاهرتز اعتمادًا على اتجاه المجال. تشير المحاكاة إلى أن التفاعلات الفائقة غير كافية لشرح عرض الخط الطيفي الأوسع الذي لوحظ في التجارب السابقة. بالإضافة إلى ذلك، يستكشفون تأثير ضوضاء المجال الكهربائي الناتجة عن الشحنات المتقلبة داخل البلورة، مشيرين إلى أن هذه الضوضاء قد تساهم في عدم الاستقرار الطيفي. تشير النتائج إلى أن عرض خط الانتشار الطيفي يتناسب مع تركيز الشوائب من الإربيوم، مما يعزز الحاجة إلى مزيد من التحقق التجريبي لفهم الآليات الأساسية لعدم الاستقرار الطيفي في المنبعثات الكمومية.

Journal: PRX Quantum, Volume: 7, Issue: 2
DOI: https://doi.org/10.1103/b974-rt6f
Publication Date: 2026-04-30
Author(s): Johannes Früh et al.
Primary Topic: Quantum optics and atomic interactions

Overview

The research highlights the advantages of using silicon as a hardware platform for quantum information processing, particularly through the integration of emitters into Fabry-Perot resonators rather than traditional nanophotonic resonators. This shift addresses the issue of optical emission frequency fluctuations, which can impede quantum application development. By utilizing Fabry-Perot resonators, the study demonstrates a fivefold reduction in spectral diffusion linewidth to 4.0(2) MHz, attributed to the larger optical mode volume that allows for greater distance from crystal surfaces and lower dopant concentrations, thereby minimizing crystal damage and emitter interactions.

Furthermore, the research indicates that the remaining spectral instability is primarily due to laser-induced electric field fluctuations, as evidenced by calculations and experiments conducted on isotopically purified \(^{28}\text{Si}\) crystals. When compared to a nanophotonic device, the new configuration significantly enhances optical coherence time, achieving \(T_2 = 20(1) \, \mu s\) at the same intracavity power. These advancements are pivotal for developing spectrally stable spin-photon interfaces in silicon, with promising implications for quantum networking and distributed quantum information processing.

Introduction

The introduction outlines the critical need for efficient quantum interconnects in quantum networks and distributed quantum information processing systems, emphasizing the importance of memory qubits with long coherence times. Various systems, including trapped atoms and solid-state platforms like nitrogen-vacancy centers and rare-earth dopants, are being explored. Among these, silicon-based single-photon emitters and spin-photon interfaces, particularly those utilizing erbium dopants, present significant advantages for scalability due to their optical transitions aligning with minimal-loss bands of optical fibers and their long spin coherence times.

Despite these benefits, the development of silicon single emitters for quantum applications faces challenges, particularly in achieving high-efficiency spin-photon interfaces with stable spectral emissions. Current devices have shown significant spectral instability, attributed to laser-induced spectral diffusion processes and defects in the silicon lattice. The authors propose a solution by integrating an erbium-doped silicon membrane into a Fabry-Perot resonator, which enhances Purcell effects while minimizing the influence of interface-related noise. This approach allows for efficient single-photon emission and improved spectral stability, as evidenced by reduced emitter lifetimes and the ability to address individual emitters within a larger mode volume, thus facilitating multiplexed addressing of multiple dopants. The study aims to quantitatively compare these results with previous nanophotonic devices and investigate remaining sources of spectral instability.

Methods

In this section, the authors describe the experimental setup used to investigate the spectral stability of individual dopants, specifically erbium-doped silicon membranes integrated into a high-finesse optical Fabry-Perot resonator. Two types of membranes are utilized: one made from commercially sourced floatzone (FZ) silicon and the other from isotopically purified \(^{28}\text{Si}\). The membranes are implanted with erbium at a peak concentration of \(10^{15} \, \text{cm}^{-3}\) using specific energies and doses, followed by post-implantation annealing to achieve the desired optical properties. The experimental design includes a polarization controller, a beam splitter for coupling light into the resonator, and a superconducting nanowire single-photon detector for emission measurements.

The authors detail the fabrication process of the membranes, including chemical etching and transfer onto a dielectric mirror, which allows for the investigation of single erbium emitters at a greater distance from the nearest interface compared to previous studies. The resonator’s characteristics are assessed at room temperature and subsequently at cryogenic temperatures, with findings indicating resonator linewidths of \(75(9) \, \text{MHz}\) for the FZ device and \(184(21) \, \text{MHz}\) for the \(^{28}\text{Si}\) device, leading to quality factors \(Q\) of \(2.6(0.3) \times 10^6\) and \(1.06(0.12) \times 10^6\), respectively. The calculated mode volumes exceed those of prior nanophotonic resonators by three orders of magnitude, resulting in a predicted Purcell factor of \(P_{\text{theo}} = 4.4\) for emitters at the maximum of the standing-wave intracavity field, significantly influenced by the branching ratio of the optical transition.

Discussion

In this section, the authors discuss the sources of spectral instability in optical transitions of embedded emitters, particularly focusing on erbium-doped silicon (Er:Si). They identify three main effects contributing to spectral shifts: static disorder, spectral diffusion, and homogeneous broadening. Static disorder leads to random energy shifts among emitters, while spectral diffusion and homogeneous broadening can adversely affect quantum applications. The authors highlight that static disorder can be mitigated through techniques like frequency shifting or time-gated detection, which can enhance spectral multiplexing capabilities. In contrast, spectral diffusion and homogeneous broadening are detrimental, necessitating their characterization for effective quantum operations.

The authors employ Monte Carlo simulations to predict the spectral diffusion linewidths caused by interactions with nuclear spins in silicon, particularly focusing on the isotope \(^{29}\text{Si}\). They find that the linewidths are significantly influenced by the orientation of external magnetic fields, with values ranging from 0.02 MHz to 0.2 MHz depending on the field direction. The simulations suggest that superhyperfine interactions are insufficient to explain the broader spectral linewidths observed in previous experiments. Additionally, they explore the impact of electric field noise from fluctuating charges within the crystal, noting that this noise could contribute to spectral instability. The findings indicate that the spectral diffusion linewidth scales with the concentration of erbium dopants, reinforcing the need for further experimental validation to understand the underlying mechanisms of spectral instability in quantum emitters.