الانتقالات الناتجة عن الضغط بين المعدن والعازل وبين البارامغناطيسية والمغناطيسية المعاكسة في بلورات أحادية من الروتيل OsO2 Pressure-induced metal-insulator and paramagnet-altermagnet transitions in rutile OsO2 single crystals

شارك:
المجلة: Newton، المجلد: 2، العدد: 7
DOI: https://doi.org/10.1016/j.newton.2026.100441
تاريخ النشر: 2026-03-07
المؤلف: Guojian Zhao وآخرون
الموضوع الرئيسي: فيزياء المادة المكثفة المتقدمة

نظرة عامة

تركز الأبحاث على تخليق وتوصيف بلورات مفردة عالية الجودة من الروتيل OsO2، وهو مادة متوقعة أن تظهر المغناطيسية البديلة. يتناول التخليق الناجح التحديات السابقة في دراسة هذه المركب. تشير قياسات النقل الكهربائي إلى أن OsO2 موصل للغاية ويظهر سلوك سائل فيرمي، مما يشير إلى تفاعلات إلكترونية كبيرة. تكشف القياسات المغناطيسية عن مغناطيسية بارامغناطيسية متساوية، بينما تصنف حسابات نظرية الكثافة الوظيفية OsO2 الكتلي على أنه شبه معدني، مع وجود جيوب إلكترونية وثقوب عند مستوى فيرمي. من الجدير بالذكر أن الحالة المغناطيسية الأساسية للمادة حساسة لتداخل كولوم على الموقع، $U$.

تسلط الدراسة أيضًا الضوء على حساسية مقاومة OsO2 للضغط، مع حدوث انتقال ملحوظ من المعدن إلى العازل عند 44 جيجا باسكال. تشير حسابات الوظائف الهجينة إلى أن زيادة الضغط تعزز تداخل كولوم $U$، مما يسهل الانتقال من معدن بارامغناطيسي إلى معدن بديل، وفي النهاية إلى عازل بديل. تشير هذه النتائج إلى أن الضغط الخارجي هو عامل حاسم لتعديل الحالة المغناطيسية الأساسية لـ OsO2، مما يمهد الطريق لتطبيقات محتملة في الإلكترونيات منخفضة الطاقة والتقنيات المتعلقة بالطاقة. تؤكد الأبحاث على أهمية هندسة الخصائص المغناطيسية لـ OsO2 لتحقيق ترتيب مضاد مغناطيسي بعيد المدى والمغناطيسية البديلة.

مقدمة

تناقش المقدمة الفئة الناشئة من المغناطيسات البديلة، والتي تتميز بتناوب استقطاب الدوران بسبب تناظر البلورات، مما يميزها عن المغناطيسات التقليدية والمغناطيسات المضادة. يتم تسليط الضوء على أكسيد الروتيل المعدني RuO2 كأول مغناطيس بديل تم التنبؤ به نظريًا، حيث أن ترتيبها المضاد المغناطيسي في كل من الأشكال الكتلية والرقيقة لا يزال موضوع نقاش مستمر. أدت تعقيدات RuO2 الرقيقة، المتأثرة بعوامل مثل كسر التناظر وكثافات العيوب، إلى تأكيدات تجريبية متنوعة لخصائصها المغناطيسية البديلة.

تقدم الورقة أيضًا OsO2، وهي مادة مشابهة هيكليًا لـ RuO2، والتي جذبت الاهتمام بسبب التنبؤات النظرية لسلوكها المغناطيسي البديل. على الرغم من التحديات في تخليق بلورات OsO2 المفردة بسبب سمية سوائلها الأولية، نجح المؤلفون في استخدام طريقة نقل بخار كيميائية من خطوتين. تكشف نتائجهم أن OsO2 يظهر موصلية معدنية وسلوك بارامغناطيسي دون ترتيب مغناطيسي بعيد المدى. من الجدير بالذكر أنه تحت ضغط عالٍ، يخضع OsO2 لانتقال من المعدن إلى العازل، مع الإشارة إلى أن الحسابات النظرية تشير إلى أن الضغط يمكن أن يضبط بشكل فعال حالته المغناطيسية الأساسية، مما قد يؤدي إلى المغناطيسية البديلة. تقترح هذه الأبحاث أنه، مثل RuO2، فإن العوامل الخارجية مثل الضغط، والتطعيم الكيميائي، والضغط هي عوامل حاسمة لتحقيق المغناطيسية البديلة في OsO2.

طرق

في هذه الدراسة، تم تخليق بلورات OsO2 المفردة باستخدام طريقة من خطوتين. في البداية، تم إعداد خليط من 2 جرام من مسحوق Os (نقاء 99.8%) و1.06 جرام من مسحوق NaBrO3 (نقاء 99.5%)، بناءً على النسبة المولية المطلوبة لتكوين OsO2، مع كون NaBrO3 هو مؤكسد قوي. تم ختم هذا الخليط في أنبوب كوارتز تحت ضغط $10^{-5}$ تور وخضع لمرحلة تسخين مسبق عند 300 درجة مئوية لمدة يومين، تلاها تفاعل كيميائي عند 650 درجة مئوية لمدة يومين إضافيين. تم زيادة درجة الحرارة بمعدل 1 درجة مئوية/دقيقة، مما أدى إلى تراكم مسحوق OsO2 متعدد البلورات.

تضمنت الخطوة الثانية نقل أنبوب الكوارتز إلى فرن أنبوب مزدوج المنطقة، حيث تم الحفاظ على أحد الطرفين الذي يحتوي على OsO2 متعدد البلورات عند 950 درجة مئوية بينما تم الحفاظ على الطرف الآخر عند 875 درجة مئوية لمدة 14 يومًا لتسهيل نمو بلورات OsO2 المفردة عبر نقل بخار كيميائي. تم ضبط معدل تسخين على 50 درجة مئوية/ساعة تحت 800 درجة مئوية و10 درجات مئوية/ساعة فوق ذلك، مع معدل تبريد قدره 1 درجة مئوية/دقيقة لكلا الطرفين. ستكون المواد الناتجة خلال هذه الدراسة متاحة عند الطلب.

نتائج

تقدم النتائج المعروضة في هذا القسم تفاصيل التخليق الناجح وتوصيف OsO2 البلوري المفرد. تكشف الصور البصرية عن عينات لامعة وذهبية ذات وجوه بلورية مسطحة ومتطورة جيدًا، بينما تؤكد حيود الأشعة السينية الطبيعة البلورية المفردة، مع قياسات ثابت الشبكة كالتالي: $a = b = 4.4955 \, \text{Å}$ و$c = 3.1827 \, \text{Å}$. تتماشى هذه القيم بشكل وثيق مع الهياكل المسترخية DFT والمعلمات المبلغ عنها سابقًا، مما يشير إلى بلورية عالية. تؤكد تقنيات التوصيف الإضافية، بما في ذلك مجهر الإلكترون الناقل والطيفيات، على مرحلة الروتيل والتركيب الستويكيومتري لبلورات OsO2.

تكشف قياسات النقل الكهربائي عن مقاومة عند درجة حرارة الغرفة تبلغ حوالي $30.7 \, \mu\Omega \cdot \text{cm}$، وهي أقل من بعض التقارير السابقة ولكنها متسقة ضمن نفس ترتيب الحجم. تظهر المقاومة اعتمادًا تربيعيًا على درجة الحرارة عند درجات الحرارة المنخفضة، مما يدل على سلوك سائل فيرمي، مع نسبة مقاومة متبقية تبلغ حوالي 13.2. تظهر قياسات تأثير هول وجود حاملات ثقوب سائدة بكثافة تبلغ حوالي $4.45 \times 10^{22} \, \text{cm}^{-3}$، والتي تنخفض قليلاً عند درجات الحرارة المنخفضة. تزداد حركة الحاملات مع انخفاض درجة الحرارة، حيث تصل إلى حوالي $92.83 \, \text{cm}^2 \cdot \text{V}^{-1} \cdot \text{s}^{-1}$ عند 10 كلفن. علاوة على ذلك، فإن المقاومة المغناطيسية إيجابية وتظهر اعتمادًا خطيًا تحت 100 كلفن، مما يشير إلى تأثيرات تشتت مداري كلاسيكية. تشير القياسات المغناطيسية إلى بارامغناطيسية دون دليل على ترتيب بعيد المدى، وتقترح حسابات DFT أن OsO2 يقع بالقرب من حدود الطور البارامغناطيسي-المغناطيسي البديل، مع إمكانية ضبط خصائصه الإلكترونية والمغناطيسية بواسطة الضغط.

نقاش

في هذا القسم، يوضح المؤلفون تقنيات التوصيف المستخدمة للتحقيق في خصائص بلورات OsO2 المفردة، التي تم تخليقها باستخدام نهج مبتكر من خطوتين. تشمل التقنيات حيود الأشعة السينية، مجهر الإلكترون الناقل (TEM)، طيف الإلكترون الضوئي بالأشعة السينية (XPS)، طيف رامان، قياسات كهربائية ومغناطيسية، قياسات نقل تحت ضغط عالٍ، حسابات نظرية الكثافة الوظيفية (DFT)، وطيف انبعاث الضوء الزاوي (ARPES). يتم وصف كل تقنية مع المعدات والظروف المحددة، مما يبرز الطبيعة الشاملة للدراسة التي تهدف إلى توضيح الخصائص الإلكترونية والمغناطيسية لـ OsO2.

تكشف النتائج عن عدة خصائص مهمة لـ OsO2: يظهر سلوك سائل فيرمي حتى 140 كلفن، مما يشير إلى تفاعلات إلكترونية قوية؛ يمتلك موصلية معدنية متفوقة مقارنة بـ RuO2، مما يشير إلى إمكانية تطبيقات كيميائية كهربائية؛ ويظهر مقاومة مغناطيسية خطية عند درجات الحرارة المنخفضة، حيث يبقى أصلها غير واضح ولكن قد يكون له تطبيقات استشعار. بالإضافة إلى ذلك، تم تحديد المادة على أنها شبه معدنية مع وجود جيوب إلكترونية وثقوب عند مستوى فيرمي، وتتأثر خصائصها المغناطيسية بمعامل تداخل كولوم \( U \). من الجدير بالذكر أن الدراسة تشير إلى أن الضغط الخارجي يمكن أن يعزز \( U \)، مما يسهل انتقالًا من المعدن إلى العازل تحت الضغط، مما يشير إلى أن الضغط هو عامل حاسم في التحكم في الحالة المغناطيسية الأساسية لـ OsO2، مما قد يؤدي إلى تحقيق المغناطيسية البديلة في هذا الأكسيد المتداخل.

Journal: Newton, Volume: 2, Issue: 7
DOI: https://doi.org/10.1016/j.newton.2026.100441
Publication Date: 2026-03-07
Author(s): Guojian Zhao et al.
Primary Topic: Advanced Condensed Matter Physics

Overview

The research focuses on the synthesis and characterization of high-quality single crystals of rutile OsO2, a material predicted to exhibit altermagnetism. The successful synthesis addresses previous challenges in studying this compound. Electrical transport measurements indicate that OsO2 is highly conductive and demonstrates Fermi liquid behavior, suggesting significant electron-electron interactions. Magnetic measurements reveal isotropic paramagnetism, while density-functional theory calculations classify bulk OsO2 as semimetallic, with both electron and hole pockets at the Fermi level. Notably, the material’s magnetic ground state is sensitive to the on-site Coulomb correlation, $U$.

The study also highlights the pressure sensitivity of OsO2’s resistivity, with a pronounced metal-insulator transition occurring at 44 GPa. Hybrid functional calculations indicate that increasing pressure enhances the Coulomb correlation $U$, facilitating a transition from a paramagnetic metal to an altermagnetic metal, and ultimately to an altermagnetic insulator. These findings suggest that external pressure is a crucial parameter for modulating the magnetic ground state of OsO2, paving the way for potential applications in low-power electronics and energy-related technologies. The research underscores the importance of engineering the magnetic properties of OsO2 to achieve long-range antiferromagnetic order and altermagnetism.

Introduction

The introduction discusses the emerging class of altermagnets, which are characterized by alternating spin polarization due to crystal symmetries, distinguishing them from traditional ferromagnets and antiferromagnets. The rutile metallic oxide RuO2 is highlighted as the first theoretically predicted altermagnet, with its antiferromagnetic order in both bulk and thin-film forms being a subject of ongoing debate. The complexities of thin-film RuO2, influenced by factors such as symmetry breaking and defect densities, have led to various experimental confirmations of its altermagnetic properties.

The paper also introduces OsO2, a material structurally similar to RuO2, which has garnered interest due to theoretical predictions of altermagnetic behavior. Despite challenges in synthesizing OsO2 single crystals due to the toxicity of its precursors, the authors successfully employed a two-step chemical vapor transport method. Their findings reveal that OsO2 exhibits metallic conductivity and paramagnetic behavior without long-range magnetic order. Notably, under high pressure, OsO2 undergoes a metal-insulator transition, with theoretical calculations indicating that pressure can effectively tune its magnetic ground state, potentially inducing altermagnetism. This research suggests that, similar to RuO2, external factors such as pressure, chemical doping, and strain are crucial for realizing altermagnetism in OsO2.

Methods

In this study, OsO2 single crystals were synthesized using a two-step method. Initially, a mixture of 2 g of Os powder (99.8% purity) and 1.06 g of NaBrO3 powder (99.5% purity) was prepared, based on the molar ratio required for OsO2 formation, with NaBrO3 serving as a strong oxidant. This mixture was vacuum-sealed in a quartz tube at a pressure of $10^{-5}$ Torr and subjected to a preheating phase at 300 °C for 2 days, followed by a chemical reaction at 650 °C for an additional 2 days. The temperature was ramped at a rate of 1 °C/min, resulting in the accumulation of polycrystalline OsO2 powder.

The second step involved transferring the quartz tube to a double-zone tube furnace, where one end containing the polycrystalline OsO2 was maintained at 950 °C while the other end was kept at 875 °C for 14 days to facilitate the growth of OsO2 single crystals via chemical vapor transport. The heating ramp rate was set to 50 °C/h below 800 °C and 10 °C/h above, with a cooling rate of 1 °C/min for both ends. The materials generated during this study will be available upon request.

Results

The results presented in this section detail the successful synthesis and characterization of single-crystalline rutile OsO2. Optical images reveal shiny, golden samples with well-developed flat crystal faces, while X-ray diffraction confirms the single-crystalline nature, with lattice constants measured as $a = b = 4.4955 \, \text{Å}$ and $c = 3.1827 \, \text{Å}$. These values align closely with both DFT-relaxed structures and previously reported parameters, indicating high crystallinity. Additional characterization techniques, including transmission electron microscopy and spectroscopies, affirm the rutile phase and stoichiometric composition of the OsO2 crystals.

Electrical transport measurements reveal a room-temperature resistivity of approximately $30.7 \, \mu\Omega \cdot \text{cm}$, which is lower than some previous reports but consistent within the same order of magnitude. The resistivity exhibits a quadratic temperature dependence at low temperatures, indicative of Fermi-liquid behavior, with a residual resistivity ratio of about 13.2. Hall effect measurements show predominant hole carriers with a density of approximately $4.45 \times 10^{22} \, \text{cm}^{-3}$, which decreases slightly at lower temperatures. The mobility of carriers increases with decreasing temperature, reaching approximately $92.83 \, \text{cm}^2 \cdot \text{V}^{-1} \cdot \text{s}^{-1}$ at 10 K. Furthermore, the magnetoresistance is positive and exhibits a linear dependence below 100 K, suggesting classical orbital scattering effects. Magnetic measurements indicate paramagnetism without evidence of long-range order, and DFT calculations suggest that OsO2 lies close to the paramagnetic-altermagnetic phase boundary, with potential for strain-induced tuning of its electronic and magnetic properties.

Discussion

In this section, the authors detail the characterization techniques employed to investigate the properties of OsO2 single crystals, which were synthesized using a novel two-step approach. The techniques include X-ray diffraction, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, electrical and magnetic measurements, high-pressure transport measurements, density-functional theory (DFT) calculations, and angle-resolved photoemission spectroscopy (ARPES). Each technique is described with specific equipment and conditions, highlighting the comprehensive nature of the study aimed at elucidating the electronic and magnetic properties of OsO2.

The findings reveal several significant characteristics of OsO2: it exhibits Fermi liquid behavior up to 140 K, indicating strong electron-electron interactions; it possesses superior metallic conductivity compared to RuO2, suggesting potential for electrochemical applications; and it demonstrates a low-temperature linear magnetoresistance, the origin of which remains unclear but may have sensor applications. Additionally, the material is identified as semimetallic with both electron and hole pockets at the Fermi level, and its magnetic properties are influenced by the Coulomb correlation parameter \( U \). Notably, the study indicates that external pressure can enhance \( U \), facilitating a pressure-induced metal-insulator transition and suggesting that pressure is a crucial factor in controlling the magnetic ground state of OsO2, which may lead to the realization of altermagnetism in this correlated oxide.