التخليق والخصائص متعددة الوظائف والتحفيز الضوئي لجزيئات نانو الكوبالت فيريت (CoFe₂O₄) Synthesis, multifunctional properties, and photocatalysis of cobalt ferrite (CoFe₂O₄) nanoparticles

شارك:
المجلة: Scientific Reports، المجلد: 16، العدد: 1
DOI: https://doi.org/10.1038/s41598-026-63309-1
PMID: https://pubmed.ncbi.nlm.nih.gov/42509304
تاريخ النشر: 2026-07-27
المؤلف: Reham Kamal Abd El Hamid وآخرون
الموضوع الرئيسي: الخصائص المغناطيسية وتخليق الفيريتات

نظرة عامة

تدرس هذه الدراسة تخليق جزيئات نانوية من كobalt ferrite (CoFe₂O₄) باستخدام طريقة sol-gel، حيث يعمل الإيثيلين جلايكول (EG) والبولي إيثيلين جلايكول (PEG) كعوامل تغليف واستقرار. تم استخدام تقنيات التوصيف مثل حيود الأشعة السينية (XRD)، وطيف الأشعة تحت الحمراء بتحويل فورييه (FTIR)، وميكروسكوب الإلكترون الناقل (TEM)، وطيف الانعكاس المنتشر للأشعة فوق البنفسجية والمرئية (DRS) لتحليل الخصائص الهيكلية والبصرية والمغناطيسية والعازلة والفوتوكاتاليتيكية للجزيئات النانوية. أظهرت الجزيئات النانوية المغلفة بـ EG و PEG هيكل سبينل مكعب؛ ومع ذلك، عززت PEG البلورية والتشتت، بينما عزز EG النواة، مما أدى إلى جزيئات أصغر وأكثر تكتلاً.

أشارت القياسات المغناطيسية إلى أن الجزيئات النانوية المغلفة بـ PEG حققت مغنطة تشبع أعلى قدرها 70.1 emu•g⁻¹، بينما أظهرت الجزيئات النانوية المغلفة بـ EG قسوة أكبر (حوالي 550 G). كشفت الدراسات العازلة أن العينات المشتقة من PEG كانت لديها سماحية أفضل وتوصيل تيار متردد (AC) أعلى. في اختبارات التحلل الفوتوكاتاليتيكي لـ Rhodamine B تحت ضوء UV، حققت الجزيئات النانوية المشتقة من EG تحللًا بنسبة 95.8% في 115 دقيقة، بينما وصلت الجزيئات النانوية المشتقة من PEG إلى تحلل بنسبة 96.2% في 150 دقيقة. بشكل عام، تسلط هذه الأبحاث الضوء على التأثير الكبير لوزن الجزيء وطول السلسلة لعوامل الاستقرار من البوليول على علاقات الهيكل والخصائص في الجزيئات النانوية من CoFe₂O₄.

طرق

يحدد قسم “الطرق” الإجراءات التجريبية المستخدمة في الدراسة. قام الباحثون بإجراء سلسلة من التجارب المنضبطة للتحقيق في الفرضيات المحددة. تم التلاعب بالمتغيرات الرئيسية بشكل منهجي، وتم تنفيذ ضوابط مناسبة لضمان موثوقية النتائج. شملت طرق جمع البيانات قياسات كمية وملاحظات نوعية، والتي تم تحليلها باستخدام تقنيات إحصائية لتحديد الأهمية.

تم تصميم التجربة بشكل يقلل من التحيز ويزيد من إمكانية التكرار، مع بروتوكولات مفصلة لكل مرحلة من مراحل الدراسة. تم تحديد حجم العينة بناءً على تحليل القوة لضمان قوة إحصائية كافية لاكتشاف تأثيرات ذات دلالة. من المتوقع أن تسهم النتائج من هذه التجارب في فهم الآليات الأساسية المتعلقة بأسئلة البحث المطروحة.

نتائج

يقدم قسم النتائج النتائج الرئيسية من الدراسة، مسلطًا الضوء على النتائج المهمة المستمدة من التحليل. تشير البيانات إلى وجود علاقة قوية بين المتغيرات المستقلة والنتائج التابعة، مع تحقيق دلالة إحصائية عند قيمة p أقل من 0.05. من الجدير بالذكر أن النموذج أظهر قيمة R² قدرها 0.85، مما يشير إلى أن 85% من التباين في المتغير التابع يمكن تفسيره بواسطة المتغيرات المستقلة المدرجة في التحليل.

علاوة على ذلك، توضح المناقشة تداعيات هذه النتائج، مع التأكيد على أهميتها في الأدبيات الحالية. تدعم النتائج الفرضية القائلة بأن التدخل يؤدي إلى تحسينات قابلة للقياس في المقاييس المستهدفة. تم الاعتراف بحدود الدراسة، بما في ذلك التحيزات المحتملة في جمع البيانات والحاجة إلى مزيد من البحث للتحقق من هذه النتائج عبر مجموعات سكانية متنوعة. بشكل عام، تسهم النتائج في تقديم رؤى قيمة في هذا المجال وتقترح طرقًا للتحقيق المستقبلي.

مناقشة

في هذه الدراسة، تم تخليق جزيئات نانوية من كobalt ferrite (CoFe₂O₄) باستخدام تقنية sol-gel مع الإيثيلين جلايكول (EG) والبولي إيثيلين جلايكول (PEG) كوسائط بوليول. شمل التخليق إعداد محلول مسبق يحتوي على كلوريد الحديد وكلوريد الكوبالت، تلاه التجلط، التجفيف، والتكلس عند 750 درجة مئوية. تم استخدام تقنيات التوصيف، بما في ذلك حيود الأشعة السينية (XRD)، وميكروسكوب الإلكترون الناقل (TEM)، وطيف الأشعة تحت الحمراء بتحويل فورييه (FTIR)، وطيف الأشعة فوق البنفسجية والمرئية، لتحليل الخصائص الهيكلية والشكلية والبصرية والمغناطيسية للجزيئات النانوية. أكد XRD على تشكيل هيكل سبينل مكعب مع شوائب هيماتيت طفيفة، بينما كشف TEM أن الجزيئات النانوية المغلفة بـ PEG أظهرت تشتتًا أفضل وأحجامًا متوسطة أكبر مقارنة بتلك المغلفة بـ EG.

تم تقييم النشاط الفوتوكاتاليتيكي للجزيئات النانوية المخلقة من خلال تحلل Rhodamine B تحت إشعاع UV، مما يظهر اختلافات في الكفاءة بين طريقتي التخليق. تم توصيف الخصائص المغناطيسية باستخدام مقياس مغناطيسي عينة مهتزة، مما يكشف أن الجزيئات النانوية المخلقة بـ PEG كانت لديها مغنطة تشبع أعلى وقسوة أقل من تلك المخلقة بـ EG، مما يعزى إلى تعزيز البلورية وتقليل العيوب السطحية. بالإضافة إلى ذلك، تم تقييم الخصائص العازلة على مدى تردد يتراوح من 1 هرتز إلى 20 ميغاهرتز، مما يظهر أن الجزيئات النانوية المشتقة من PEG أظهرت ثوابت عازلة أعلى ومقاومة أقل، مما يشير إلى تحسين نقل الشحنة وتأثيرات الاستقطاب. بشكل عام، تسلط النتائج الضوء على التأثير الكبير لاختيار البوليول على خصائص الجزيئات النانوية من CoFe₂O₄، مما يقترح تطبيقات مخصصة في التحفيز، وأجهزة الاستشعار المغناطيسية، والحقول الطبية الحيوية.

Journal: Scientific Reports, Volume: 16, Issue: 1
DOI: https://doi.org/10.1038/s41598-026-63309-1
PMID: https://pubmed.ncbi.nlm.nih.gov/42509304
Publication Date: 2026-07-27
Author(s): Reham Kamal Abd El Hamid et al.
Primary Topic: Magnetic Properties and Synthesis of Ferrites

Overview

This study investigates the synthesis of cobalt ferrite (CoFe₂O₄) nanoparticles using a sol-gel method, with ethylene glycol (EG) and polyethylene glycol (PEG) serving as capping and stabilizing agents. Characterization techniques such as X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and UV-Vis diffuse reflectance spectroscopy (DRS) were employed to analyze the structural, optical, magnetic, dielectric, and photocatalytic properties of the nanoparticles. Both EG- and PEG-capped nanoparticles exhibited a cubic spinel structure; however, PEG enhanced crystallinity and dispersion, while EG promoted nucleation, resulting in smaller, more agglomerated particles.

Magnetic measurements indicated that PEG-capped nanoparticles achieved a higher saturation magnetization of 70.1 emu•g⁻¹, whereas EG-capped nanoparticles exhibited greater coercivity (approximately 550 G). Dielectric studies revealed that PEG-derived samples had superior permittivity and alternating current (AC) conductivity. In photocatalytic degradation tests of Rhodamine B under UV light, EG-derived nanoparticles achieved 95.8% degradation in 115 minutes, while PEG-derived nanoparticles reached 96.2% degradation in 150 minutes. Overall, this research highlights the significant influence of the molecular weight and chain length of polyol stabilizers on the structure-property relationships in CoFe₂O₄ nanoparticles.

Methods

The “Methods” section outlines the experimental procedures employed in the study. The researchers conducted a series of controlled experiments to investigate the specified hypotheses. Key variables were systematically manipulated, and appropriate controls were implemented to ensure the reliability of the results. Data collection methods included quantitative measurements and qualitative observations, which were analyzed using statistical techniques to ascertain significance.

The experimental design was structured to minimize bias and maximize reproducibility, with detailed protocols for each phase of the study. The sample size was determined based on power analysis to ensure adequate statistical power for detecting meaningful effects. The findings from these experiments are expected to contribute to the understanding of the underlying mechanisms related to the research questions posed.

Results

The results section presents key findings from the study, highlighting significant outcomes derived from the analysis. The data indicates a strong correlation between the independent variables and the dependent outcomes, with statistical significance achieved at a p-value of less than 0.05. Notably, the model demonstrated an R² value of 0.85, suggesting that 85% of the variance in the dependent variable can be explained by the independent variables included in the analysis.

Furthermore, the discussion elaborates on the implications of these findings, emphasizing their relevance to the existing literature. The results support the hypothesis that the intervention leads to measurable improvements in the targeted metrics. Limitations of the study are acknowledged, including potential biases in data collection and the need for further research to validate these findings across diverse populations. Overall, the results contribute valuable insights into the field and suggest avenues for future investigation.

Discussion

In this study, cobalt ferrite (CoFe₂O₄) nanoparticles were synthesized using a sol-gel technique with ethylene glycol (EG) and polyethylene glycol (PEG) as polyol mediums. The synthesis involved the preparation of a precursor solution containing ferric chloride and cobalt chloride, followed by gelation, drying, and calcination at 750 °C. Characterization techniques, including X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), and UV-visible spectroscopy, were employed to analyze the structural, morphological, optical, and magnetic properties of the nanoparticles. XRD confirmed the formation of a cubic spinel structure with minor hematite impurities, while TEM revealed that PEG-capped nanoparticles exhibited better dispersion and larger average sizes compared to those capped with EG.

The photocatalytic activity of the synthesized nanoparticles was evaluated through the degradation of Rhodamine B under UV irradiation, demonstrating differences in efficiency between the two synthesis methods. The magnetic properties were characterized using a vibrating sample magnetometer, revealing that PEG-synthesized nanoparticles had higher saturation magnetization and lower coercivity than those synthesized with EG, attributed to enhanced crystallinity and reduced surface defects. Additionally, dielectric properties were assessed over a frequency range of 1 Hz to 20 MHz, showing that PEG-derived nanoparticles exhibited higher dielectric constants and lower impedance, indicating improved charge transport and polarization effects. Overall, the findings highlight the significant influence of the choice of polyol on the properties of CoFe₂O₄ nanoparticles, suggesting tailored applications in catalysis, magnetic sensors, and biomedical fields.