DOI: https://doi.org/10.1057/s41599-026-08069-z
تاريخ النشر: 2026-06-22
المؤلف: Heung Hee Kim وآخرون
الموضوع الرئيسي: تحليل الكفاءة باستخدام DEA
نظرة عامة
تستكشف هذه الدراسة كفاءة تحويل موارد البحث والتطوير (R&D) إلى مخرجات ابتكارية عبر 51 دولة من 2016 إلى 2020، باستخدام نهج تحليلي من مرحلتين. تستخدم المرحلة الأولى تحليل حدود البيانات (DEA) لتقدير الكفاءة التقنية، مما يكشف عن تباين كبير بين الدول. تظهر الاقتصادات الناشئة مثل الصين وأوكرانيا بشكل متكرر على حدود الكفاءة، بينما تظهر الاقتصادات المتقدمة مثل الولايات المتحدة وألمانيا كفاءة تقنية كاملة ولكن كفاءة إجمالية أقل، مما يشير إلى تحديات في توسيع مخرجات البحث والتطوير. تستخدم المرحلة الثانية نموذج توبيت العشوائي لتحليل العوامل البيئية التي تؤثر على الكفاءة، وتجد ارتباطات سلبية مع الناتج المحلي الإجمالي للفرد والتحصيل التعليمي، بينما تظهر مؤشرات الحوكمة علاقات شرطية.
تسلط النتائج الضوء على تباين بين كثافة مدخلات البحث والتطوير وكفاءة المدخلات النسبية، بما يتماشى مع “مفارقة إنتاجية البحث والتطوير”، حيث لا يؤدي زيادة البحث والتطوير إلى زيادة متناسبة في مخرجات الابتكار. بالنسبة للاقتصادات المتقدمة، تشير النتائج إلى أن مجرد زيادة ميزانيات البحث والتطوير قد لا تكون كافية لتعزيز نتائج الابتكار؛ بدلاً من ذلك، يُوصى بالتركيز على تحسين إدارة البحث والتطوير واختيار المشاريع. تواجه الاقتصادات الناشئة تحدي الحفاظ على الكفاءة مع زيادة البحث والتطوير، مما يستلزم استراتيجيات للتعلم المؤسسي وتعزيز القدرات. بالإضافة إلى ذلك، تؤكد الدراسة على الحاجة إلى التوافق بين نتائج التعليم ومتطلبات البحث والتطوير، داعية إلى سياسات تعزز الروابط بين الجامعات والصناعة وتحسن توافق المهارات لتعزيز الكفاءة العامة للبحث والتطوير.
مقدمة
تسلط مقدمة الورقة الضوء على الأهمية المتزايدة للبحث والتطوير (R&D) في دفع النمو الوطني والتنافسية الدولية ضمن اقتصاد قائم على المعرفة. على الرغم من ارتفاع الإنفاق العالمي على البحث والتطوير، تشير “مفارقة إنتاجية البحث والتطوير” إلى أن الاستثمارات الأعلى لا تؤدي دائمًا إلى زيادات متناسبة في مخرجات الابتكار، مثل براءات الاختراع والمنشورات. يبرز هذا التباين ضرورة تقييم ليس فقط حجم مدخلات البحث والتطوير ولكن أيضًا الكفاءة التي يتم بها تحويل هذه المدخلات إلى نتائج ابتكارية ملموسة. لقد كان تحليل حدود البيانات (DEA) طريقة شائعة لتقييم الكفاءة في سياقات متعددة المدخلات والمخرجات؛ ومع ذلك، ركزت الدراسات الحالية بشكل أساسي على المدخلات الصلبة والعوامل الاقتصادية الكلية، متجاهلة تأثير البنية التحتية الناعمة، مثل الحوكمة والشفافية.
تهدف الدراسة إلى سد هذه الفجوات من خلال استخدام إطار تحليلي موحد للتحقيق في كفاءة البحث والتطوير عبر 51 دولة، تشمل كل من الاقتصادات المتقدمة والناشئة من 2016 إلى 2020. تستخدم نهجًا من مرحلتين: أولاً، حساب درجات كفاءة العوائد المتغيرة على المقياس (VRS) السنوية من خلال نموذج DEA ثابت وتحليل نافذة DEA لتقييم ديناميات الكفاءة؛ ثانيًا، تطبيق انحدار توبيت العشوائي لاستكشاف العلاقة بين العوامل المؤسسية—تحديدًا الشفافية ومكافحة الفساد، كما هو موضح من خلال مؤشر إدراك الفساد (CPI)—واختلافات الكفاءة، مع التحكم في التباين غير الملاحظ الخاص بالدول. تسهم هذه الأبحاث في الأدبيات من خلال ربط كفاءة البحث والتطوير بالسياقات المؤسسية، ودمج التقييمات الديناميكية مع منهجيات بيانات اللوحة، وتقديم مقارنة شاملة لديناميات الكفاءة عبر مراحل التنمية المتنوعة، مما يوفر رؤى لتعزيز استراتيجيات البحث والتطوير الوطنية.
طرق
توضح قسم المنهجية النهج المنهجي المستخدم في البحث للتحقيق في الفرضيات المحددة. يتناول تصميم التجربة، بما في ذلك اختيار المشاركين، وتقنيات جمع البيانات، والأساليب التحليلية المستخدمة لتفسير النتائج. استخدمت الدراسة نهجًا مختلطًا، يجمع بين البيانات الكمية والنوعية لتوفير فهم شامل للظواهر قيد التحقيق.
تم جمع البيانات الكمية من خلال استبيانات منظمة وتجارب، بينما تم جمع الرؤى النوعية عبر المقابلات ومجموعات التركيز. تم تطبيق تحليلات إحصائية، بما في ذلك نماذج الانحدار وتحليل التباين (ANOVA)، لتقييم العلاقات بين المتغيرات. تؤكد المنهجية على أهمية ضمان موثوقية وصلاحية عملية جمع البيانات، باستخدام بروتوكولات مثبتة للتخفيف من التحيزات وتعزيز قوة النتائج. بشكل عام، تم تصميم الإطار المنهجي لتسهيل استكشاف شامل لأسئلة البحث مع الالتزام بالمعايير الأخلاقية.
نتائج
استخدم التحليل التجريبي لكفاءة البحث والتطوير عبر 51 دولة من 2016 إلى 2020 كل من نماذج CCR وBCC، مع التركيز على إجمالي الإنفاق المحلي على البحث والتطوير وإجمالي الباحثين كمدخلات، وطلبات براءات الاختراع والمنشورات العلمية كمخرجات. تشير النتائج إلى تباين بين كثافة استثمار البحث والتطوير وكفاءة المدخلات والمخرجات، مما يكشف عن تباين هيكلي بين الدول. تظهر الاقتصادات الناشئة مثل الصين وأوكرانيا والبوسنة والهرسك بشكل متكرر على حدود الكفاءة، محققة مقاييس أداء عالية، بينما أظهرت الاقتصادات المتقدمة مثل الولايات المتحدة وإيطاليا كفاءة تقنية كاملة ولكن كفاءة مقياس أقل، مما يشير إلى أنها قد لا تعمل عند مقاييس مثلى. على العكس من ذلك، أظهرت القوى التقليدية في البحث والتطوير، بما في ذلك كوريا الجنوبية وألمانيا، مستويات كفاءة معتدلة، مما يشير إلى عوائد متناقصة في أنظمة الابتكار الناضجة.
سلط تحليل الكفاءة الديناميكي، الذي تم إجراؤه من خلال نهج نافذة DEA، الضوء على اتجاهات الاستقرار والتقلب في أداء البحث والتطوير. حافظت دول مثل الصين والولايات المتحدة على استقرار عالٍ في درجات كفاءتها، بينما أظهرت الاقتصادات الناشئة مثل إندونيسيا وأوزبكستان تقلبات كبيرة، مما يدل على تغييرات هيكلية سريعة. عرضت الاقتصادات الناضجة، بما في ذلك ألمانيا واليابان، درجات كفاءة منخفضة مع تقلبات طفيفة، مما يشير إلى جمود هيكلي في أنظمة البحث والتطوير الخاصة بها. في المقابل، أظهرت دول مثل السلفادور وتايلاند كفاءة منخفضة باستمرار مع القليل من التباين، مما يشير إلى شكل من “الاستقرار غير الفعال”. بشكل عام، تؤكد النتائج أن كثافة البحث والتطوير العالية لا تضمن كفاءة نسبية عالية، وأن الإصلاحات الهيكلية قد تكون ضرورية للدول ذات الأداء المنخفض لتعزيز إنتاجية البحث والتطوير الخاصة بها.
مناقشة
يتناول قسم المناقشة في ورقة البحث التعقيدات المحيطة باستثمار البحث والتطوير وتأثيره على الإنتاجية، مع تسليط الضوء بشكل خاص على “مفارقة إنتاجية البحث والتطوير”. تشير هذه المفارقة إلى أن كثافة البحث والتطوير العالية لا تؤدي دائمًا إلى زيادات متناسبة في مخرجات الابتكار، مثل براءات الاختراع والمنشورات. تشير الدراسات التجريبية، بما في ذلك تلك التي أجراها دينغ وآخرون (2025) وكيم (2018)، إلى عوائد متناقصة على استثمارات البحث والتطوير، خاصة في الاقتصادات المتقدمة. علاوة على ذلك، يؤكد راديكيتش وبوج (2017) ورودريغيز-نافارو وبريتو (2018) على عدم الكفاءة الهيكلية في أنظمة الابتكار في الاتحاد الأوروبي، مما يشير إلى أن مجرد زيادة ميزانيات البحث والتطوير قد لا تكون كافية لتعزيز أداء الابتكار. بدلاً من ذلك، تلعب كفاءة تخصيص موارد البحث والتطوير، المتأثرة بالحوكمة وجودة رأس المال البشري، دورًا حاسمًا في تحديد نتائج الابتكار.
تستكشف هذه القسم أيضًا محددات كفاءة البحث والتطوير، مشيرًا إلى تحول من التركيز فقط على المدخلات الكمية إلى النظر في العوامل النوعية مثل ظروف الحوكمة ورأس المال البشري. تشير الدراسات إلى أن الحوكمة الفعالة يمكن أن تعزز كفاءة استثمارات البحث والتطوير، بينما قد لا تكون العلاقة بين التحصيل التعليمي ونتائج الابتكار مباشرة، كما هو موضح من خلال “مفارقة الكمية-الجودة”. منهجيًا، تنتقد الورقة استخدام نماذج DEA التقليدية لتقييم الكفاءة، داعية إلى إطار تحليلي من مرحلتين يدمج العناصر الديناميكية ويعالج الطبيعة المحدودة لدرجات الكفاءة من خلال نموذج توبيت العشوائي. يهدف هذا النهج إلى تقديم فهم أكثر دقة للعوامل التي تؤثر على كفاءة البحث والتطوير عبر دول مختلفة.
القيود
تسلط قيود هذه الدراسة الضوء على عدة مجالات للبحث المستقبلي. أولاً، بينما تشمل التحليل 51 دولة لمقارنات أوسع بين الدول، قد يحد الاعتماد على نهج الحالات الكاملة بسبب نقص البيانات في المتغيرات المرافقة في المرحلة الثانية من التمثيل ويقدم تحيزات اختيار. مع تحسين التغطية الإحصائية الدولية، ينبغي أن تستفيد الأبحاث المستقبلية من الاستفادة من مجموعات بيانات اللوحة الأكثر شمولاً وتقريرًا بشكل متسق لتعزيز الاستنتاجات عبر الدول. ثانيًا، تعكس مؤشرات مخرجات الدراسة—طلبات براءات الاختراع والمنشورات العلمية—حجم إنتاج المعرفة ولكنها لا تأخذ في الاعتبار الجودة أو القيمة الاقتصادية للابتكارات. يمكن أن تستفيد الدراسات المستقبلية من دمج مقاييس نوعية، مثل المؤشرات المعتمدة على الاقتباسات أو نتائج نقل التكنولوجيا، لتقديم تقييم أكثر شمولاً لأداء الابتكار.
بالإضافة إلى ذلك، تشير نتائج الدراسة إلى أن الارتباط السلبي الملحوظ بين التحصيل التعليمي والكفاءة يتطلب مزيدًا من التحقيق. قد يتضمن ذلك تفكيك مؤشرات رأس المال البشري حسب مجال الدراسة أو مستوى الدرجة لفهم أفضل لأي شرائح من القوى العاملة تساهم بشكل كبير في اختلافات الكفاءة بين الدول. بشكل عام، تشير هذه القيود إلى أن كفاءة البحث والتطوير الوطنية تتأثر ليس فقط بحجم الاستثمار ولكن أيضًا بعوامل مثل مرحلة التنمية وظروف الحوكمة وتنظيم الموارد والقدرات. تهدف النتائج إلى تعزيز فهم أعمق لأداء البحث والتطوير عبر الدول وتشجيع المزيد من الاستكشاف للآليات التي تدفع الفجوات العالمية في الكفاءة.
DOI: https://doi.org/10.1057/s41599-026-08069-z
Publication Date: 2026-06-22
Author(s): Heung Hee Kim et al.
Primary Topic: Efficiency Analysis Using DEA
Overview
This study investigates the efficiency of R&D resource conversion into innovation outputs across 51 countries from 2016 to 2020, utilizing a two-stage analytical approach. The first stage employs Data Envelopment Analysis (DEA) to estimate technical efficiency, revealing significant cross-country variability. Emerging economies like China and Ukraine frequently appear on the efficiency frontier, while advanced economies such as the United States and Germany demonstrate full pure technical efficiency but lower overall efficiency, suggesting challenges in scaling R&D outputs. The second stage employs a Random Effects Tobit model to analyze environmental factors influencing efficiency, finding negative correlations with GDP per capita and educational attainment, while governance indicators show conditional relationships.
The findings highlight a divergence between R&D input intensity and relative efficiency, consistent with the “R&D productivity paradox,” where increased R&D does not yield proportional innovation outputs. For advanced economies, the results suggest that merely increasing R&D budgets may not suffice for enhancing innovation outcomes; instead, a focus on optimizing R&D management and project selection is recommended. Emerging economies face the challenge of maintaining efficiency as R&D scales up, necessitating strategies for institutional learning and capability enhancement. Additionally, the study emphasizes the need for alignment between educational outcomes and R&D demands, advocating for policies that strengthen university-industry connections and improve skill matching to enhance overall R&D efficiency.
Introduction
The introduction of the paper highlights the increasing significance of research and development (R&D) in driving national growth and international competitiveness within a knowledge-based economy. Despite rising global R&D expenditures, the “R&D productivity paradox” suggests that higher investments do not always lead to proportional increases in innovation outputs, such as patents and publications. This discrepancy emphasizes the necessity of evaluating not only the volume of R&D inputs but also the efficiency with which these inputs are transformed into tangible innovation outcomes. Data Envelopment Analysis (DEA) has been a prevalent method for assessing efficiency in multi-input, multi-output contexts; however, existing studies have primarily focused on hard inputs and macroeconomic factors, neglecting the influence of soft infrastructure, such as governance and transparency.
The study aims to fill these gaps by employing a unified analytical framework to investigate R&D efficiency across 51 countries, encompassing both advanced and emerging economies from 2016 to 2020. It utilizes a two-stage approach: first, calculating annual Variable Returns to Scale (VRS) efficiency scores through a static DEA model and DEA-Window analysis to assess efficiency dynamics; second, applying a Random Effects Tobit regression to explore the relationship between institutional factors—specifically transparency and corruption control, as indicated by the Corruption Perceptions Index (CPI)—and efficiency differences, while controlling for unobserved country-specific heterogeneity. This research contributes to the literature by linking R&D efficiency with institutional contexts, integrating dynamic assessments with panel data methodologies, and providing a comprehensive comparison of efficiency dynamics across diverse development stages, thereby offering insights for enhancing national R&D strategies.
Methods
The methodology section outlines the systematic approach employed in the research to investigate the specified hypotheses. It details the experimental design, including the selection of participants, data collection techniques, and analytical methods utilized to interpret the results. The study employed a mixed-methods approach, integrating both quantitative and qualitative data to provide a comprehensive understanding of the phenomena under investigation.
Quantitative data were collected through structured surveys and experiments, while qualitative insights were gathered via interviews and focus groups. Statistical analyses, including regression models and ANOVA, were applied to assess the relationships between variables. The methodology emphasizes the importance of ensuring reliability and validity in the data collection process, employing established protocols to mitigate biases and enhance the robustness of the findings. Overall, the methodological framework is designed to facilitate a thorough exploration of the research questions while adhering to ethical standards.
Results
The empirical analysis of R&D efficiency across 51 countries from 2016 to 2020 utilized both the CCR and BCC models, focusing on Gross Domestic Expenditure on R&D and total researchers as inputs, and patent applications and scientific publications as outputs. The results indicate a divergence between R&D investment intensity and input-output efficiency, revealing structural heterogeneity among nations. Emerging economies such as China, Ukraine, and Bosnia and Herzegovina frequently appeared on the efficiency frontier, achieving high performance metrics, while advanced economies like the United States and Italy demonstrated full technical efficiency but lower scale efficiency, suggesting they may not be operating at optimal scales. Conversely, traditional R&D powerhouses, including South Korea and Germany, exhibited moderate efficiency levels, indicating diminishing returns in mature innovation ecosystems.
The dynamic efficiency analysis, conducted through a DEA-Window approach, highlighted stability and volatility trends in R&D performance. Countries like China and the United States maintained high stability in their efficiency scores, while emerging economies such as Indonesia and Uzbekistan showed significant fluctuations, indicative of rapid structural changes. Mature economies, including Germany and Japan, displayed low efficiency scores with minimal volatility, suggesting structural inertia in their R&D systems. In contrast, nations like El Salvador and Thailand exhibited consistently low efficiency with little variation, indicating a form of “inefficient stability.” Overall, the findings underscore that high R&D intensity does not guarantee high relative efficiency, and structural reforms may be necessary for countries with low performance to enhance their R&D productivity.
Discussion
The discussion section of the research paper addresses the complexities surrounding R&D investment and its impact on productivity, particularly highlighting the “R&D productivity paradox.” This paradox suggests that high R&D intensity does not always yield proportional increases in innovation outputs, such as patents and publications. Empirical studies, including those by Ding et al. (2025) and Kim (2018), indicate diminishing returns on R&D investments, particularly in advanced economies. Moreover, Radicic and Pugh (2017) and Rodríguez-Navarro and Brito (2018) emphasize structural inefficiencies in the EU’s innovation systems, suggesting that merely increasing R&D budgets may not suffice for enhancing innovation performance. Instead, the efficiency of R&D resource allocation, influenced by governance and human capital quality, plays a crucial role in determining innovation outcomes.
The section further explores the determinants of R&D efficiency, noting a shift from focusing solely on quantitative inputs to considering qualitative factors such as governance conditions and human capital. Studies indicate that effective governance can enhance the efficiency of R&D investments, while the relationship between educational attainment and innovation outcomes may not be straightforward, as highlighted by the “quantity-quality paradox.” Methodologically, the paper critiques the use of traditional DEA models for assessing efficiency, advocating for a two-stage analytical framework that incorporates dynamic elements and addresses the bounded nature of efficiency scores through a Random Effects Tobit model. This approach aims to provide a more nuanced understanding of the factors influencing R&D efficiency across different countries.
Limitations
The limitations of this study highlight several areas for future research. Firstly, while the analysis includes 51 countries for broader cross-country comparisons, the reliance on a complete-case approach due to missing data in second-stage covariates may limit representativeness and introduce selection biases. As international statistical coverage improves, future research should leverage more comprehensive and consistently reported panel datasets to enhance cross-country inferences. Secondly, the study’s output indicators—patent applications and scientific publications—reflect the volume of knowledge production but do not account for the quality or economic value of innovations. Future studies could benefit from incorporating qualitative measures, such as citation-based indicators or technology transfer outcomes, to provide a more holistic assessment of innovation performance.
Additionally, the study’s findings suggest that the observed negative association between educational attainment and efficiency warrants further investigation. This could involve disaggregating human-capital indicators by field of study or degree level to better understand which segments of the workforce contribute most significantly to cross-country efficiency differences. Overall, these limitations indicate that national R&D efficiency is influenced not only by investment scale but also by factors such as development stage, governance conditions, and the organization of resources and capabilities. The findings aim to foster a deeper understanding of cross-country R&D performance and encourage further exploration of the mechanisms driving global efficiency disparities.
