DOI: https://doi.org/10.1038/s41467-025-57914-3
PMID: https://pubmed.ncbi.nlm.nih.gov/40082444
تاريخ النشر: 2025-03-13
المؤلف: Mingkun Li وآخرون
الموضوع الرئيسي: المستحلبات بيكرينغ واستقرار الجسيمات
طرق
في هذا القسم، يوضح المؤلفون المواد المستخدمة في طرقهم التجريبية. تشمل المواد الرئيسية الكواشف مثل الأخضر المالاشيت (95%)، محلول الفوكسي (1 ملغ/مل في الميثانول)، وليباز A. oryzae (300,000 وحدة/غ)، المأخوذة من Aladdin Bio-chem (شنغهاي). تشمل المواد الإضافية ألبومين مصل البقر (BSA، 96%)، البنفسج البلوري (AR)، الهيموغلوبين (64.5 كيلودالتون)، ومحلول بيروكسيد التيرت-بيوتيل (5.0-6.0 م في الن-ديكان)، المشتراة من Macklin Biochemical (شنغهاي). تم الحصول على مواد كيميائية أخرى مثل حمض البيروجاليك (99%)، الأدينين (99%)، أدينوسين ثلاثي الفوسفات (95%)، n-BTMS (97%)، PTMS (97%)، ثنائي كلوريد ثنائي ميثيل السيلان (DDS، 98.5%)، كحول البنزيل (MBA، 99%)، 2-ميركابتو-5-نيتروbenzimidazole (MNBI)، و4-نيتروفينيل بالميتات (p-NPP، 98%) من موردين مختلفين بما في ذلك Beijing Innochem وJ&K Scientific وSigma-Aldrich.
تشير هذه القائمة الشاملة من المواد إلى إعداد تجريبي محدد جيدًا، وهو أمر ضروري لإعادة الإنتاج والتحقق من نتائج البحث. تشير اختيار الكواشف إلى التركيز على التفاعلات البيوكيميائية والعمليات الإنزيمية، والتي من المحتمل أن تكون مركزية لأهداف الدراسة.
نتائج
في هذا القسم، يتم تقديم نتائج البحث حول تنفيذ واستقرار الجسيمات السيليكا (SiO₂) على شكل حلقة المستقرة في المستحلبات بيكرينغ (RPEs). تم إعداد المستحلبات باستخدام جهاز خلط، مع تعديل كارهية الجسيمات SiO₂ بواسطة الفينيل تريميثوكسي سيلان (PTMS) لتعزيز الأمفيليكية. تم تغيير كثافة التثبيت لـ PTMS من 0.35 إلى 11.9 نانومتر\(^{-2}\)، مما يؤثر على نوع المستحلب المتكون – الزيت في الماء (O/W) لكثافات التثبيت المنخفضة (<2.10 نانومتر\(^{-2}\)) والماء في الزيت (W/O) لكثافات التثبيت العالية (>5.64 نانومتر\(^{-2}\)). كما تأثرت هياكل تعبئة حلقات SiO₂ عند الواجهة بكثافة التثبيت، حيث تتشكل طبقات سداسية في مستحلبات O/W عند الكثافات المنخفضة وهياكل أنبوبية عند الكثافات الأعلى.
علاوة على ذلك، قامت الدراسة بتحديد العلاقة بين تركيز حلقات SiO₂ وحجم قطرات المستحلب. مع زيادة تركيز الحلقات من 5 إلى 50 ملغ مل\(^{-1}\)، انخفض متوسط قطر سوتير للقطرات من حوالي 160 إلى 40 ميكرومتر. تتماشى هذه النتيجة مع الدراسات السابقة التي أثبتت وجود علاقة خطية بين قطر القطرة وكتلة الجسيمات المضافة، مما يشير إلى أن عكس متوسط قطر سوتير (\(1/D_S\)) يتناسب مع تركيز الجسيمات. بشكل عام، تسلط هذه النتائج الضوء على الدور الهام لكثافة تثبيت PTMS وتركيز الجسيمات في تحديد الخصائص الهيكلية والحجمية لـ RPEs.
مناقشة
في هذا القسم، يناقش المؤلفون استقرار وكفاءة التحفيز لمستحلبات بيكرينغ على شكل حلقة (RPEs) مقارنةً بمستحلبات بيكرينغ القياسية (SPEs). يحددون علاقة بين معامل الانتشار ($D_s$) وتركيز الجسيمات ($C_p$) لـ RPEs، مشيرين إلى أن $D_s \sim C_{ring}^{-0.63}$، وهو ما ينحرف عن القانون الأسّي المتوقع. يُعزى هذا الانحراف إلى هيكل تعبئة الحلقات ووجود حلقات غير متصلة أثناء إعداد المستحلب. كما يظهر المؤلفون أن سرعات الخلط الأعلى تؤدي إلى أحجام قطرات أصغر، حيث يتناسب نموذج أسّي بشكل أفضل مع العلاقة بين سرعة الخلط ($\omega$) و$D_s$ مقارنةً بنموذج قانون القوة.
تستكشف الدراسة أيضًا الأداء التحفيزي لـ RPEs في التفاعلات المحفزة بالإنزيم، مسلطةً الضوء على خصائص الانتشار المحسنة التي تسهل نقل الركيزة بشكل أسرع بين الأطوار. أظهرت RPEs نشاطًا محددًا (SA) أعلى بكثير لتحلل 4-نيتروفينيل بالميتات المحفز بالليباز مقارنةً بـ SPEs وDPEs وTPEs، وهو ما يُعزى إلى المساحة السطحية الأكبر والموضع الفعال لليباز عند واجهة المستحلب. يخلص المؤلفون إلى أن RPEs لا توفر فقط استقرارًا متفوقًا ولكن أيضًا تعزز الكفاءة التحفيزية، مما يجعلها مرشحة واعدة لمجموعة متنوعة من التطبيقات، بما في ذلك التحفيز عند الواجهة والاستشعار عبر مطيافية رامان المعززة بالسطح (SERS).
DOI: https://doi.org/10.1038/s41467-025-57914-3
PMID: https://pubmed.ncbi.nlm.nih.gov/40082444
Publication Date: 2025-03-13
Author(s): Mingkun Li et al.
Primary Topic: Pickering emulsions and particle stabilization
Methods
In this section, the authors detail the materials utilized in their experimental methods. The key reagents include malachite green (95%), phoxim solution (1 mg/mL in methanol), and A. oryzae lipase (300,000 U/g), sourced from Aladdin Bio-chem (Shanghai). Additional materials include bovine serum albumin (BSA, 96%), crystal violet (AR), hemoglobin (64.5 kDa), and tert-butyl hydroperoxide solution (5.0-6.0 M in n-decane), procured from Macklin Biochemical (Shanghai). Other chemicals such as pyrogallic acid (99%), adenine (99%), adenosine triphosphate (95%), n-BTMS (97%), PTMS (97%), dichlorodimethylsilane (DDS, 98.5%), benzyl alcohol (MBA, 99%), 2-mercapto-5-nitrobenzimidazole (MNBI), and 4-nitrophenyl palmitate (p-NPP, 98%) were obtained from various suppliers including Beijing Innochem, J&K Scientific, and Sigma-Aldrich.
This comprehensive list of materials indicates a well-defined experimental setup, essential for reproducibility and validation of the research findings. The selection of reagents suggests a focus on biochemical interactions and enzymatic processes, which are likely central to the study’s objectives.
Results
In this section, the results of the research on the implementation and mechanical stability of ring-shaped silica (SiO₂) particle-stabilized Pickering emulsions (RPEs) are presented. The emulsions were prepared using a homogenizer, with the hydrophobicity of SiO₂ particles modified by phenyltrimethoxysilane (PTMS) to enhance amphiphilicity. The grafting density of PTMS was varied from 0.35 to 11.9 nm\(^{-2}\), influencing the type of emulsion formed—oil-in-water (O/W) for low grafting densities (<2.10 nm\(^{-2}\)) and water-in-oil (W/O) for high grafting densities (>5.64 nm\(^{-2}\)). The packing structures of the SiO₂ rings at the interface were also affected by the grafting density, with hexagonal monolayers forming in O/W emulsions at low densities and tubular structures at higher densities.
The study further quantified the relationship between the concentration of SiO₂ rings and the size of the emulsion droplets. As the concentration of rings increased from 5 to 50 mg mL\(^{-1}\), the Sauter mean diameter of the droplets decreased from approximately 160 to 40 μm. This finding aligns with previous studies that established a linear relationship between the droplet diameter and the added particle mass, indicating that the inverse of the Sauter mean diameter (\(1/D_S\)) is proportional to the concentration of the particles. Overall, these results highlight the significant role of PTMS grafting density and particle concentration in determining the structural and size characteristics of RPEs.
Discussion
In this section, the authors discuss the stability and catalytic efficiency of ring-shaped Pickering emulsions (RPEs) compared to standard Pickering emulsions (SPEs). They establish a relationship between the diffusion coefficient ($D_s$) and particle concentration ($C_p$) for RPEs, noting that $D_s \sim C_{ring}^{-0.63}$, which deviates from the expected power law. This deviation is attributed to the packing structure of the rings and the presence of unattached rings during emulsion preparation. The authors also demonstrate that higher homogenization speeds lead to smaller droplet sizes, with an exponential model fitting the relationship between homogenization speed ($\omega$) and $D_s$ better than a power law model.
The study further explores the catalytic performance of RPEs in enzyme-catalyzed reactions, highlighting their enhanced diffusion properties that facilitate faster substrate transfer between phases. RPEs exhibited significantly higher specific activity (SA) for lipase-catalyzed hydrolysis of 4-nitrophenyl palmitate compared to SPEs, DPEs, and TPEs, attributed to the larger interfacial area and the effective positioning of lipase at the emulsion interface. The authors conclude that RPEs not only provide superior stability but also enhance catalytic efficiency, making them promising candidates for various applications, including interfacial catalysis and sensing via surface-enhanced Raman spectroscopy (SERS).
