انبعاث الضوء الأبيض في زجاجات إطار الإيميدازولات الزيوليتية White‐Light Emission in Zeolitic Imidazolate Framework Glasses

شارك:
المجلة: Advanced Materials، المجلد: 38، العدد: 25
DOI: https://doi.org/10.1002/adma.72968
PMID: https://pubmed.ncbi.nlm.nih.gov/41913387
تاريخ النشر: 2026-03-30
المؤلف: Zhencai Li وآخرون
الموضوع الرئيسي: خصائص الزجاج وتطبيقاته

نظرة عامة

تسلط هذه الدراسة الضوء على الاستخدام المبتكر لإطارات الإيميدازولات الزيوليتية (ZIFs)، وبشكل خاص ZIF-62، كمواد جديدة لتشكيل الزجاج ذات خصائص ضوئية فريدة. تكشف الدراسة أن انبعاث الضوء الأبيض العريض يمكن تحقيقه من خلال استراتيجية التزجيج-الضغط-التسخين، مما يعزز انبعاث الضوء المرئي (الأزرق) ويوسع طيف الانبعاث. ومن النتائج الملحوظة هو الانزياح الأحمر الحاد بمقدار 37 نانومتر في ذروة الانبعاث عندما تتجاوز درجة حرارة التسخين عتبة حرجة تبلغ 1.07T_g. وصلت العائد الكمي للضوء الفوتولومينيسنت (PLQY) لزجاج ZIF-62 إلى 12.2% بعد ظروف تسخين مثالية، مما يشير إلى إمكانية ضبط دقيق للخصائص الفوتولومينيسنت.

تم توضيح الآليات الأساسية لهذه الظواهر من خلال التحليلات الهيكلية، التي اقترحت أن التحسينات الملحوظة مرتبطة بانخفاض فجوة الطاقة بسبب زيادة نقل الشحنة من ligand إلى ligand (LLCT) المرتبطة بالمكونات العطرية وتفاعلات Zn─N. أظهر تصنيع ناجح لثنائي الصمام الثنائي الباعث للضوء الأبيض (LED) من زجاج ZIF-62 المعالج حرارياً فعالية مضيئة تبلغ 4.2 لومن/وات، مع استقرار تشغيلي جدير بالثناء، حيث احتفظت بـ 36.8% من الفعالية بعد 72 ساعة من الاستخدام المستمر. يضع هذا العمل زجاج ZIF المعالج بشكل مثالي كمرشحين واعدين لتطوير ثنائيات الصمام الثنائي الباعثة للضوء الأبيض عالية الأداء.

مقدمة

تناقش المقدمة أهمية ثنائيات الصمام الثنائي الباعثة للضوء الأبيض في الحالة الصلبة (LEDs) كتكنولوجيا واعدة لحلول الإضاءة المستقبلية بسبب كفاءتها في استهلاك الطاقة، وطول عمرها، وفوائدها البيئية. تعتمد أداء هذه الثنائيات بشكل كبير على الفوسفور المستخدم، والذي يمكن تصنيفه إلى أنواع مختلفة، بما في ذلك الفوسفور البلوري غير العضوي، والفوسفور العضوي، والنانوسكريات البيروفيسكيت، والفوسفور القائم على الزجاج/السيراميك غير العضوي. على الرغم من تقدمها، تواجه هذه الفوسفورات تحديات مثل مقاومة الرطوبة والاستقرار الكيميائي، مما يبرز الحاجة إلى مواد مبتكرة مثل إطارات الإيميدازولات الزيوليتية المتلألئة (ZIFs)، وهي نوع من الإطارات العضوية المعدنية (MOF).

تركز الورقة بشكل خاص على ZIF-62، الذي أظهر إمكانيات لانبعاث الضوء الأبيض من خلال عملية التزجيج والتسخين. بينما تكون بلورات ZIF-62 عادة غير نشطة فوتولومينيسنت في الطيف المرئي بسبب فجوة الطاقة الواسعة (حوالي 3.58 إلكترون فولت)، يظهر المؤلفون أن التزجيج-الضغط-التسخين يمكن أن يحفز انبعاث الضوء الأزرق العريض في زجاج ZIF-62. لا تعزز هذه العملية فقط انبعاث الضوء الأزرق ولكنها تؤدي أيضًا إلى انزياح أحمر في طيف الانبعاث. تختتم الدراسة بتصنيع ناجح لثنائيات الصمام الثنائي الباعثة للضوء الأبيض القائمة على زجاج ZIF-62 التي تظهر عائدًا كميًا عاليًا للضوء الفوتولومينيسنت (PLQY) واستقرار حراري، مما يمثل تقدمًا كبيرًا في تطوير فوسفورات الضوء الأبيض الفعالة.

نقاش

تناقش الدراسة تخليق وتوصيف ZIF-62 وأشكاله الزجاجية، وبشكل خاص زجاج ZIF-62 المعالج بالتبريد السريع (MQG) وزجاج الضغط الساخن (HPG). تكشف الدراسة أن T_g لـ MQG ينخفض من 593 كلفن إلى حوالي 550 كلفن عند الضغط الساخن، مما يشير إلى ضعف الاتصال الهيكلي الناتج عن الضغط. على العكس، فإن تسخين HPG عند 673 كلفن لمدة 30 دقيقة يزيد من T_g إلى حوالي 563 كلفن، مما يشير إلى استعادة هيكل أكثر استقرارًا. يؤكد تحليل حيود الأشعة السينية (XRD) الطبيعة البلورية لـ ZIF-62 والطبيعة غير المتبلورة للزجاج. ومن الجدير بالذكر أن خصائص الفوتولومينيسنس (PL) للزجاج قد تحسنت مقارنة بالشكل البلوري، حيث أظهر HPG 673-30 أقوى فلوروسنت، والذي يُعزى إلى إعادة ترتيب الهيكل التي تؤثر على الهيكل الإلكتروني.

تستكشف الدراسة أيضًا أداء الفوتولومينيسنس لزجاج ZIF-62 في تطبيقات LED. تظهر الثنائيات المصنعة خصائص واعدة، حيث يظهر HPG 673-30 إمكانيات لانبعاث الضوء الأبيض البارد تحت إثارة 370 نانومتر. يتغير العائد الكمي الداخلي للفوتولومينيسنس (PLQY) لـ ZIF-62 مع طول موجة الإثارة، مما يشير إلى تحسين الأداء بعد التزجيج والتسخين. تشير النتائج إلى أن التعديلات الهيكلية أثناء المعالجة تؤثر بشكل كبير على الخصائص الإلكترونية وسلوك PL، وهو أمر حاسم لتحسين أداء LED. تسلط الدراسة الضوء على أهمية فهم التفاعل بين التغيرات الهيكلية والخصائص الإلكترونية لتحسين فعالية ثنائيات الصمام الثنائي الباعثة للضوء القائمة على MOF.

Journal: Advanced Materials, Volume: 38, Issue: 25
DOI: https://doi.org/10.1002/adma.72968
PMID: https://pubmed.ncbi.nlm.nih.gov/41913387
Publication Date: 2026-03-30
Author(s): Zhencai Li et al.
Primary Topic: Glass properties and applications

Overview

This research highlights the innovative use of zeolitic imidazolate frameworks (ZIFs), specifically ZIF-62, as novel glass formers with unique photonic properties. The study reveals that broadband white light emission can be achieved through a vitrification-pressurization-annealing strategy, which enhances visible (blue) light emission and broadens the emission spectrum. A notable finding is the sharp redshift of 37 nm in the emission peak when the annealing temperature exceeds a critical threshold of 1.07T_g. The photoluminescence quantum yield (PLQY) of the ZIF-62 glass reached 12.2% after optimal annealing conditions, indicating the potential for precise tuning of photoluminescent properties.

The underlying mechanisms for these phenomena were elucidated through structural analyses, which suggested that the observed enhancements are linked to a decrease in the bandgap due to increased ligand-to-ligand charge transfer (LLCT) associated with the aromatic components and Zn─N interactions. The successful fabrication of a white light-emitting diode (LED) from the annealed ZIF-62 glass demonstrated a luminous efficacy of 4.2 lm/W, with a commendable operational stability, retaining 36.8% efficacy after 72 hours of continuous use. This work positions optimally processed ZIF glasses as promising candidates for the development of high-performance solid-state white LEDs.

Introduction

The introduction discusses the significance of solid-state white light-emitting diodes (LEDs) as a promising technology for future lighting solutions due to their energy efficiency, longevity, and environmental benefits. The performance of these LEDs largely depends on the phosphors used, which can be categorized into various types, including inorganic crystal phosphors, organic phosphors, perovskite nanocrystals, and inorganic glass/ceramic-based phosphors. Despite their advancements, these phosphors face challenges such as moisture resistance and chemical stability, highlighting the need for innovative materials like luminescent zeolitic imidazolate frameworks (ZIFs), a type of metal-organic framework (MOF).

The paper specifically focuses on ZIF-62, which has shown potential for white light emission through a process of vitrification and annealing. While ZIF-62 crystals are typically photoluminescent-inactive in the visible spectrum due to their wide bandgap (approximately 3.58 eV), the authors demonstrate that vitrification-pressurization-annealing can induce broadband blue-light emission in ZIF-62 glasses. This process not only enhances the blue-light emission but also leads to a redshift in the emission spectrum. The study concludes with the successful fabrication of ZIF-62 glass-based white LEDs that exhibit high photoluminescence quantum yield (PLQY) and thermal stability, marking a significant advancement in the development of efficient white light phosphors.

Discussion

The research discusses the synthesis and characterization of ZIF-62 and its glass forms, specifically melt-quenched ZIF-62 glass (MQG) and hot-pressed glass (HPG). The study reveals that the T_g of MQG decreases from 593 K to approximately 550 K upon hot-pressing, indicating a pressure-induced weakening of structural connectivity. Conversely, annealing HPG at 673 K for 30 minutes increases its T_g to around 563 K, suggesting a recovery to a more stable structure. X-ray diffraction (XRD) confirms the crystalline nature of ZIF-62 and the amorphous nature of the glasses. Notably, the photoluminescence (PL) properties of the glasses are enhanced compared to the crystalline form, with HPG 673-30 exhibiting the strongest fluorescence, attributed to structural rearrangements affecting the electronic structure.

The study further explores the photoluminescence performance of ZIF-62 glasses in LED applications. The fabricated LEDs demonstrate promising characteristics, with HPG 673-30 showing potential for cold-white light emission under 370 nm excitation. The internal photoluminescence quantum yield (PLQY) of ZIF-62 varies with excitation wavelength, indicating enhanced performance after vitrification and annealing. The findings suggest that the structural modifications during processing significantly influence the electronic properties and PL behavior, which are critical for optimizing LED performance. The research highlights the importance of understanding the interplay between structural changes and electronic properties to improve the efficacy of MOF glass-based LEDs.