تأثير زمن الانتظار والتقلبات في 5G على جدولة TAS في شبكة 5G-TSN: دراسة تجريبية Impact of 5G Latency and Jitter on TAS Scheduling in a 5G-TSN Network: An Empirical Study

شارك:
المجلة: IEEE Internet of Things Journal، المجلد: 13، العدد: 12
DOI: https://doi.org/10.1109/jiot.2026.3673410
تاريخ النشر: 2026-03-12
المؤلف: Pablo Rodríguez Martín وآخرون
الموضوع الرئيسي: تكنولوجيا مزامنة الوقت الشبكي

نظرة عامة

يتناول هذا القسم دمج الشبكات الحساسة للوقت (TSN) مع الشبكات الخاصة من الجيل الخامس (5G) لتلبية المتطلبات الصارمة لتطبيقات إنترنت الأشياء الصناعية (IIoT)، لا سيما في سياق الروبوتات المتنقلة المستقلة (AMR) وسير العمل الديناميكي. تسلط الدراسة الضوء على التحديات التي تطرحها التأخيرات العشوائية والاهتزاز المتأصل في 5G، والتي تعطل قدرة TSN على الحفاظ على زمن استجابة محدد واهتزاز منخفض. يقدم المؤلفون نتائج تجريبية من منصة اختبار توضح ضرورة ضبط معلمات الشكل الزمني (TAS) بعناية، وبشكل خاص تعويض نافذة الإرسال بين مفاتيح TSN، لضمان الاتصال المحدد. تشير النتائج إلى أن التعويضات المفرطة يمكن أن تؤدي إلى زيادة التأخيرات أو فقدان الحتمية، مما يبرز أهمية تكوين TAS بناءً على قياسات النسبة المئوية من الدرجة العالية لتأخير 5G.

في الاستنتاجات، يحدد المؤلفون الشروط الزمنية الحرجة المطلوبة للإرسال المحدد في الشبكات المدمجة 5G-TSN. يحددون أربعة قيود زمنية أساسية يجب تلبيتها لضمان إرسال جميع الحزم من نفس دورة التطبيق ضمن نافذة واحدة. بالإضافة إلى ذلك، يكشفون أن مدة دورة الشبكة يجب أن تتجاوز اهتزاز 5G لتجنب التداخل بين الدورات (ICI). كما تشير الدراسة إلى أن تدفقات التأخير الحرجة المتعددة التي تشترك في نفس الأولوية تزيد من تأخيرات الانتظار والاهتزاز في 5G، مما يتطلب تعويضات أكبر ونافذات إرسال. يدعو المؤلفون إلى مزيد من البحث في تقنيات تخفيف الاهتزاز والخوارزميات التكيفية التي يمكن أن تضبط معلمات TAS ديناميكيًا بناءً على الظروف الزمنية الحقيقية، بالإضافة إلى استكشاف التحسينات من خلال ميزات uRLLC وأنظمة 6G المستقبلية.

مقدمة

تناقش مقدمة الورقة دمج إنترنت الأشياء الصناعية (IIoT) مع الشبكات الحساسة للوقت (TSN) والشبكات المحمولة من الجيل الخامس (5G)، مع التأكيد على أهميتها في أتمتة التصنيع الحديثة ضمن الصناعة 4.0. تتطلب تطبيقات IIoT، لا سيما الروبوتات المتصلة والأنظمة المستقلة (CRAS)، اتصالات محددة وذات زمن استجابة منخفض لضمان عمليات آمنة وقابلة للتنبؤ. تسهل معايير TSN، وبشكل خاص الشكل الزمني IEEE 802.1Qbv (TAS)، ذلك من خلال إدارة إرسال الحزم عبر الوصول المجدول إلى الشبكة. ومع ذلك، فإن الاعتماد على البنية التحتية السلكية يطرح تحديات من حيث التنقل والمرونة، والتي تهدف شبكات 5G إلى معالجتها من خلال الاتصالات فائقة الموثوقية وذات زمن الاستجابة المنخفض (uRLLC).

تحدد الورقة التحديات الحرجة في تحقيق الاتصال المحدد من النهاية إلى النهاية (E2E) بسبب الطبيعة العشوائية لـ 5G، والتي تقدم تأخيرات متغيرة واهتزاز يمكن أن تعطل عمليات TAS. يقترح المؤلفون تحليلًا مفصلًا لتأثير التأخيرات الناتجة عن 5G على معلمات جدولة TAS، بهدف وضع شروط للحفاظ على الاتصال المحدد في الشبكات المدمجة 5G-TSN. تشمل المساهمات الرئيسية منصة اختبار تجريبية تقيم تكوينات TAS تحت ظروف 5G الواقعية، مما يوفر رؤى حول كيفية ضبط معلمات TAS لاستيعاب تدفقات المرور الحرجة للتأخير مع ضمان زمن استجابة واهتزاز محددين. تسلط النتائج الضوء على أهمية تكوين تعويضات نافذة الإرسال وفترات الدورة بعناية لتتوافق مع التأخيرات الملاحظة في 5G، مما يحافظ على الضمانات المحددة الضرورية لتطبيقات IIoT الحساسة للوقت.

الطرق

في هذا القسم، يوضح المؤلفون تكوين منصة اختبار 5G-TSN (الشبكات الحساسة للوقت) وإعداد التجارب المستخدمة في بحثهم. تم تصميم منصة الاختبار لتقييم أداء وقدرات تقنية 5G بالتزامن مع TSN، وهو أمر حاسم للتطبيقات التي تتطلب زمن استجابة منخفض وموثوقية عالية.

يتضمن إعداد التجارب تكوينات محددة تم تطبيقها بشكل منهجي على منصة الاختبار، على الرغم من عدم تقديم التفاصيل الدقيقة لهذه التكوينات في الاقتباس. هذا الإعداد ضروري لإجراء تجارب تقيم فعالية دمج 5G-TSN، مما يمكّن الباحثين من جمع البيانات وتحليل نتائج اختباراتهم.

النتائج

في هذا القسم، يتم تقديم نتائج الأداء للتجارب التي أجريت على الشبكات الحساسة للوقت (TSN) المدمجة مع 5G. تم إجراء مقارنة تجريبية بين شبكة TSN مستقلة ودمجها مع 5G، مع التركيز على زمن الاستجابة والاهتزاز لتدفق مركز بيانات (DC) مع أحجام حزم تبلغ 200 بايت. كانت تكوين TAS المستخدمة هي $W_{MS,DC} = 46.5 \, \mu s$ و $T_{nc}^{MS} = 30 \, ms$.

تشير النتائج إلى أن الحد الأقصى للتأخير التجريبي لشبكة TSN المستقلة كان $max\{d_{emp}^{DC}\} = 40.53 \, \mu s$ مع اهتزاز قدره $t_{jit}^{DC} = 29.54 \, \mu s$ (p = 1). بالمقابل، أظهر إعداد 5G-TSN قيمًا أعلى بكثير، حيث كان $max\{d_{emp}^{DC}\} = 18.41 \, ms$ و $t_{jit}^{DC} = 10.5 \, ms$ (p = 0.999). تعزز هذه النتائج الاستنتاجات المستخلصة في القسم IV-A، مما يبرز أهمية تصنيف $d_{emp}^{DC}$ كعامل حاسم لجدولة TAS الحساسة للوقت.

المناقشة

ت outlines قسم المناقشة في الورقة بنية وديناميات تشغيل شبكة 5G-TSN (الشبكات الحساسة للوقت) المخصصة لأتمتة الصناعة. يحدد ثلاثة قطاعات اتصال رئيسية: حافة/غرفة السحابة، التي تركز مهام الإدارة عبر نظام تنفيذ التصنيع (MES) وتضم وحدات التحكم المنطقية القابلة للبرمجة (PLCs) أو وحدات التحكم المنطقية الافتراضية (vPLCs). تؤكد الورقة على أن التطبيقات الصناعية تتضمن بشكل أساسي حركة مرور حساسة للتأخير، مع متطلبات زمن استجابة من النهاية إلى النهاية (E2E) تتراوح من مئات الميكروثانية إلى عشرات المللي ثانية. يتم تسليط الضوء على التطبيقات المتزامنة الدورية، التي تتميز بالتواصل الدوري والتزامن عند العقد الوسيطة، كأمر حاسم لضمان الاتصال الموثوق في البيئات الصناعية.

علاوة على ذلك، تناقش الورقة إدارة جودة الخدمة (QoS) في شبكات TSN، والتي تستخدم نقطة رمز الأولوية (PCP) ذات 3 بتات لتحديد أولويات حركة المرور، وتتناقض مع نظام معرف تدفق QoS في 5G (QFI). لا يزال الربط بين فئات حركة مرور TSN وتدفقات QoS في 5G مجالًا نشطًا للبحث بسبب الاختلافات الجوهرية في آليات تحديد الأولويات. يتم تقديم الشكل الزمني IEEE 802.1Qbv (TAS) كمعيار يسهل جدولة الإطارات من الطبقة الثانية بطريقة حساسة للوقت، مما يضمن أن يتم إرسال حركة المرور ذات الأولوية الأعلى قبل حركة المرور ذات الأولوية المنخفضة. تختتم القسم بمناقشة أهمية التزامن في شبكات 5G-TSN، موضحة كيف يتم تحقيق التزامن الزمني من خلال بروتوكول الوقت الدقيق (PTP) ودور مترجمي TSN في الحفاظ على اتساق الساعة عبر الشبكة. تؤكد الورقة على أن الفروقات في تزامن الساعة يمكن أن تؤثر بشكل كبير على أداء التطبيقات الحساسة للوقت، مما يتطلب استراتيجيات صارمة لإدارة زمن الاستجابة والاهتزاز.

Journal: IEEE Internet of Things Journal, Volume: 13, Issue: 12
DOI: https://doi.org/10.1109/jiot.2026.3673410
Publication Date: 2026-03-12
Author(s): Pablo Rodríguez Martín et al.
Primary Topic: Network Time Synchronization Technologies

Overview

This section discusses the integration of Time-Sensitive Networking (TSN) with 5G private networks to meet the stringent requirements of Industrial Internet of Things (IIoT) applications, particularly in the context of Autonomous Mobile Robots (AMR) and dynamic workflows. The study highlights the challenges posed by the stochastic delay and jitter inherent in 5G, which disrupt TSN’s ability to maintain bounded latency and low jitter. The authors present empirical findings from a testbed that demonstrate the necessity of carefully tuning the Time-Aware Shaper (TAS) parameters, specifically the transmission window offset between TSN switches, to ensure deterministic communication. The results indicate that excessive offsets can lead to increased delays or loss of determinism, emphasizing the importance of configuring TAS based on high-order p-th percentile measurements of 5G delay.

In the conclusions, the authors outline the critical timing conditions required for deterministic transmission in integrated 5G-TSN networks. They identify four essential timing constraints that must be satisfied to ensure that all packets from the same application cycle are transmitted within a single window. Additionally, they reveal that the network cycle duration must exceed the 5G jitter to avoid inter-cycle interference (ICI). The study also notes that multiple delay-critical flows sharing the same priority exacerbate 5G queuing delays and jitter, necessitating larger offsets and transmission windows. The authors advocate for further research into jitter-mitigation techniques and adaptive algorithms that can dynamically adjust TAS parameters based on real-time conditions, as well as exploring enhancements through uRLLC features and future 6G systems.

Introduction

The introduction of the paper discusses the integration of the Industrial Internet of Things (IIoT) with Time-Sensitive Networking (TSN) and 5th Generation (5G) mobile networks, emphasizing their significance in modern manufacturing automation within Industry 4.0. IIoT applications, particularly Connected Robotics and Autonomous Systems (CRAS), require deterministic, low-latency communication to ensure safe and predictable operations. TSN standards, particularly the IEEE 802.1Qbv Time-Aware Shaper (TAS), facilitate this by managing packet transmission through scheduled access to the network. However, the reliance on wired infrastructure poses challenges in terms of mobility and flexibility, which 5G networks aim to address through ultra-Reliable and Low-Latency Communications (uRLLC).

The paper identifies critical challenges in achieving End-to-End (E2E) deterministic communication due to the stochastic nature of 5G, which introduces variable delays and jitter that can disrupt TAS operations. The authors propose a detailed analysis of the impact of 5G-induced delays on TAS scheduling parameters, aiming to establish conditions for maintaining deterministic communication in integrated 5G-TSN networks. Key contributions include an experimental testbed that evaluates TAS configurations under realistic 5G conditions, providing insights into how to adjust TAS parameters to accommodate delay-critical traffic flows while ensuring bounded latency and jitter. The findings highlight the importance of carefully configuring transmission window offsets and cycle periods to align with observed 5G delays, thereby preserving the deterministic guarantees essential for time-sensitive IIoT applications.

Methods

In this section, the authors detail the configuration of their 5G-TSN (Time-Sensitive Networking) testbed and the experimental setup utilized for their research. The testbed is designed to evaluate the performance and capabilities of 5G technology in conjunction with TSN, which is critical for applications requiring low latency and high reliability.

The experimental setup includes specific configurations that were systematically applied to the testbed, although the precise details of these configurations are not provided in the excerpt. This setup is essential for conducting experiments that assess the effectiveness of the 5G-TSN integration, enabling the researchers to gather data and analyze the outcomes of their tests.

Results

In this section, the performance results of the experiments conducted on Time-Sensitive Networking (TSN) integrated with 5G are presented. An empirical comparison was made between a standalone TSN network and its integration with 5G, focusing on latency and jitter for a windowed data center (DC) flow with packet sizes of 200 Bytes. The TAS configuration utilized was $W_{MS,DC} = 46.5 \, \mu s$ and $T_{nc}^{MS} = 30 \, ms$.

The findings indicate that the maximum empirical delay for the standalone TSN network was $max\{d_{emp}^{DC}\} = 40.53 \, \mu s$ with a jitter of $t_{jit}^{DC} = 29.54 \, \mu s$ (p = 1). In contrast, the 5G-TSN setup exhibited significantly higher values, with $max\{d_{emp}^{DC}\} = 18.41 \, ms$ and $t_{jit}^{DC} = 10.5 \, ms$ (p = 0.999). These results reinforce the conclusions drawn in Section IV-A, highlighting the importance of characterizing $d_{emp}^{DC}$ as a critical factor for wireless-aware TAS scheduling.

Discussion

The discussion section of the paper outlines the architecture and operational dynamics of a 5G-TSN (Time-Sensitive Networking) network tailored for industrial automation. It identifies three key connectivity segments: the Edge/Cloud Room, which centralizes management tasks via a Manufacturing Execution System (MES) and includes Programmable Logic Controllers (PLCs) or virtualized PLCs (vPLCs). The paper emphasizes that industrial applications primarily involve delay-sensitive traffic, with end-to-end (E2E) latency requirements ranging from hundreds of microseconds to tens of milliseconds. Cyclic-Synchronous applications, characterized by periodic communication and synchronization at intermediate nodes, are highlighted as critical for ensuring reliable communication in industrial settings.

Furthermore, the paper discusses Quality of Service (QoS) management in TSN networks, which utilizes a 3-bit Priority Code Point (PCP) for traffic prioritization, and contrasts this with the 5G QoS Flow ID (QFI) system. The mapping between TSN traffic classes and 5G QoS flows remains an area of active research due to inherent differences in prioritization mechanisms. The IEEE 802.1Qbv Time-Aware Shaper (TAS) is introduced as a standard that facilitates time-aware scheduling of Layer 2 frames, ensuring that higher-priority traffic is transmitted before lower-priority traffic. The section concludes with a discussion on the importance of synchronization in 5G-TSN networks, detailing how time synchronization is achieved through Precision Time Protocol (PTP) and the role of TSN translators in maintaining clock consistency across the network. The paper asserts that discrepancies in clock synchronization can significantly impact the performance of time-sensitive applications, necessitating stringent latency and jitter management strategies.