تحسين أداء تقليل السحب وزيادة كفاءة الطاقة لبوليمر أكسيد البولي إيثيلين في تدفق الزيت والماء ثنائي الطور باستخدام منهجية سطح الاستجابة Optimization of drag reduction performance and energy efficiency enhancement of polyethylene oxide in oil-water two-phase flow using response surface methodology

شارك:
المجلة: Scientific Reports
DOI: https://doi.org/10.1038/s41598-026-72269-5
تاريخ النشر: 2026-09-21
المؤلف: Kun Liu وآخرون
الموضوع الرئيسي: دراسات الريولوجيا وديناميات السوائل

نظرة عامة

تبحث هذه الدراسة في أداء تقليل السحب (DR) لحمض بولي إيثيلين أكسيد (PEO) في تدفق الزيت والماء الأفقي ثنائي الطور، باستخدام أنبوب بقطر داخلي 5 سم وطول 10 م. من خلال استخدام تصميم منهجية سطح الاستجابة (RSM) من ثلاثة عوامل مع 15 تجربة، تؤكد الدراسة أن حلول PEO بتركيزات تتراوح بين 50-250 جزء في المليون تظهر سلوكًا غير نيوتوني ضعيف وزيادات طفيفة في اللزوجة، مما يشير إلى أن DR ناتج بشكل أساسي عن التأثيرات اللزجة المرنة بدلاً من تغييرات اللزوجة. يظهر نموذج RSM التربيعي المطور دلالة إحصائية عالية (R² المعدل = 0.9979) ودقة تنبؤية، مع أخطاء ضمن ± 3%.

تكشف التحليلات أن معدل تدفق الزيت هو العامل السلبي الأكثر أهمية الذي يؤثر على كفاءة DR، حيث يساهم بنسبة 49% في التأثير الكلي، بينما تؤثر تركيزات PEO ومعدل تدفق الماء بشكل إيجابي، مع تحديد نطاقات مثالية لتحقيق أقصى DR يتجاوز 65% وزيادة تدفق تبلغ حوالي 40%. على وجه التحديد، تم العثور على الظروف المثلى لتكون معدل تدفق الماء من 30-40 لتر/دقيقة، ومعدل تدفق الزيت من 2-4 لتر/دقيقة، وتركيز PEO من 150-200 جزء في المليون. توفر هذه الدراسة إطارًا تنبؤيًا قويًا لتحسين استراتيجيات تقليل السحب في نقل الزيت والماء، مما يعزز كفاءة الطاقة ويقلل من الأثر البيئي دون الحاجة إلى توسيع الأنبوب.

مقدمة

تناقش مقدمة هذه الورقة البحثية الدور المهم للبوليمرات عالية الوزن الجزيئي في تقليل السحب المضطرب، خاصة ضمن أنظمة نقل الأنابيب في صناعة النفط. لقد أظهر استخدام سلاسل البوليمر المرنة، مثل بولي إيثيلين أكسيد ومشتقات بولي أكريلاميد، فعالية في تقليل خسائر الضغط الناتجة عن الاحتكاك في التدفقات المضطربة دون تغيير كبير في لزوجة السوائل. هذه القدرة ضرورية لتحسين كفاءة الطاقة وتقليل التكاليف التشغيلية في نقل النفط الخام، حيث يعد الحفاظ على إنتاجية عالية أمرًا أساسيًا. تتفاعل الخصائص اللزجة المرنة لهذه الحلول البوليمرية مع الهياكل المضطربة بالقرب من جدار الأنبوب، مما يؤدي إلى تقليل توليد الدوامات وتغيير ديناميات نقل الزخم.

بينما تم التحقق من صحة البوليمرات المقللة للسحب في التدفقات النيوتونية أحادية الطور، فإن سلوكها في الأنظمة متعددة الطور، مثل خلطات الزيت والماء، يقدم تحديات معقدة. تشير الأبحاث إلى أن فعالية هذه الإضافات تتأثر بعوامل مختلفة، بما في ذلك توزيع الطور، وفروق اللزوجة، وشدة الاضطراب، مما يؤدي غالبًا إلى سلوكيات غير أحادية. على الرغم من النتائج الواعدة في التجارب المنضبطة، لا تزال هناك فجوات في فهم الاستقرار على المدى الطويل وتحسين حقن البوليمر في العمليات متعددة الطور. تهدف هذه الدراسة إلى معالجة هذه الفجوات من خلال تطوير إطار تنبؤي باستخدام منهجية سطح الاستجابة (RSM) لتحسين تقليل السحب في تدفقات الزيت والماء ثنائية الطور. تقدم الأبحاث نموذجًا تم التحقق منه إحصائيًا يلتقط الاعتماديات غير الخطية لمعدلات التدفق وتركيزات البوليمر، مما يوفر رؤى حول الظروف التشغيلية المثلى ويعزز كفاءة الطاقة في التطبيقات الصناعية. من الجدير بالذكر أن هذا العمل هو الأول الذي يطبق منهجية سطح الاستجابة بشكل منهجي لتحسين المعلمات المتعددة في هذا السياق، مما يربط الخصائص الريولوجية بمقاييس الأداء العملية ويسلط الضوء على التأثير السائد لمعدل تدفق الزيت على تباين تقليل السحب.

النتائج

يقدم قسم النتائج تحليلًا شاملاً للخصائص الريولوجية وأداء تقليل السحب لمحلول بولي إيثيلين أكسيد (PEO) المائي في تدفق الزيت والماء ثنائي الطور. تظهر منحنيات التدفق المستمدة من الريومتر الدوراني أن حلول PEO تظهر ضغوط قص أقل بكثير مقارنة بمرحلة الزيت المرجعية، حيث تصل قيم ضغط القص لأعلى تركيز (250 جزء في المليون) إلى حوالي 0.33 باسكال عند معدلات قص تبلغ 100 ثانية⁻¹، مقارنة بـ 1.5 باسكال للزيت. تعرض حلول PEO سلوكًا نيوتونيًا بشكل أساسي مع ميل طفيف لتقليل القص عند التركيزات الأعلى، مما يشير إلى أن الحلول تبقى ضمن نظام مخفف إلى شبه مخفف غير متشابك. يقترح هذا السلوك الريولوجي أن تقليل السحب الملحوظ في التدفق المضطرب ليس بسبب زيادة اللزوجة ولكن بسبب الخصائص اللزجة المرنة للبوليمر، التي تقمع الهياكل المضطربة من خلال آليات تتماشى مع تأثير تومز.

يكشف تحليل نسب تقليل السحب (DR%) عبر معدلات تدفق مختلفة وتركيزات البوليمر عن ثلاث اتجاهات رئيسية: علاقة على شكل U مقلوب مع معدل تدفق الماء، وتدهور أحادي لـ DR% مع زيادة معدل تدفق الزيت، وتأثير إيجابي مشبع لتركيز البوليمر. تم تحديد الظروف المثلى لتقليل السحب عند معدلات تدفق الماء التي تبلغ حوالي 30-40 لتر/دقيقة وتركيزات بوليمر تتراوح بين 150-200 جزء في المليون. يتم استخدام منهجية سطح الاستجابة (RSM) لنمذجة سلوك تقليل السحب، مما يؤدي إلى تطوير نموذج تربيعي يلتقط بشكل فعال التفاعلات المعقدة وتأثيرات الانحناء داخل النظام. يتم تأسيس المعادلة التنبؤية النهائية لـ DR%، مع تسليط الضوء على التأثيرات الكبيرة لمعدل تدفق الماء، ومعدل تدفق الزيت، وتركيز البوليمر على أداء تقليل السحب، مع التأكيد على الحاجة إلى تحسين دقيق لتحقيق توازن بين هذه العوامل من أجل تعديل الاضطراب بشكل فعال في أنظمة نقل الزيت والماء.

المناقشة

تبحث الدراسة في تقليل السحب المضطرب في تدفقات الزيت والماء ثنائية الطور الأفقية المعززة بإضافة بولي إيثيلين أكسيد (PEO)، باستخدام منشأة إعادة تدوير مغلقة مصممة لقياسات دقيقة. تم بناء المنشأة من الفولاذ المقاوم للصدأ 304، وتتميز بقسم اختبار بطول 10 م يضمن ظروفًا مضطربة متطورة بالكامل، مع التركيز على الحفاظ على خصائص الجدران الناعمة لعزل تأثيرات PEO على تقليل السحب. تستخدم الدراسة بروتوكولات معايرة وتحقق صارمة لجميع أدوات القياس، مما يؤكد أن الإعداد التجريبي يتوافق مع الشروط الهيدروديناميكية اللازمة للتقييم الدقيق لأداء تقليل السحب لمحلول PEO.

تشير النتائج الرئيسية إلى أن تركيزات PEO بين 150-200 جزء في المليون تحقق معدلات تقليل سحب مثلى تتجاوز 65%، مع زيادة متوسطة في التدفق تبلغ 39.6% وانخفاض متCorresponding في استهلاك الطاقة الضخمة بنسبة تقارب 29%. تؤسس الدراسة نموذجًا قويًا لمنهجية سطح الاستجابة (RSM)، مما يظهر دقة تنبؤية عالية (R² المعدل = 0.9979) ويكشف أن معدل تدفق الزيت يؤثر سلبًا على كفاءة تقليل السحب، بينما تظهر تركيزات PEO ومعدل تدفق الماء نطاقات مثلى لأداء معزز. توفر هذه الدراسة إطارًا شاملاً لتحسين تقليل السحب في أنظمة نقل الزيت والماء الصناعية، مما يسهم في تحسين الكفاءة وتقليل الأثر البيئي.

Journal: Scientific Reports
DOI: https://doi.org/10.1038/s41598-026-72269-5
Publication Date: 2026-09-21
Author(s): Kun Liu et al.
Primary Topic: Rheology and Fluid Dynamics Studies

Overview

This research investigates the drag reduction (DR) performance of polyethylene oxide (PEO) in horizontal oil-water two-phase flow, utilizing a 5 cm inner diameter and 10 m long pipeline. Employing a three-factor Box-Behnken response surface methodology (RSM) design with 15 experimental runs, the study confirms that PEO solutions at concentrations of 50-250 ppm exhibit weak non-Newtonian behavior and negligible viscosity increases, indicating that DR is primarily due to viscoelastic effects rather than viscosity changes. The developed quadratic RSM model demonstrates high statistical significance (adjusted R² = 0.9979) and predictive accuracy, with errors within ± 3%.

The analysis reveals that the oil flow rate is the most significant negative factor affecting DR efficiency, contributing 49% to the overall effect, while PEO concentration and water flow rate have positive influences, with optimal ranges identified for maximum DR exceeding 65% and a flow increase of approximately 40%. Specifically, the optimal conditions are found to be a water flow rate of 30-40 L/min, an oil flow rate of 2-4 L/min, and a PEO concentration of 150-200 ppm. This study provides a robust predictive framework for optimizing drag reduction strategies in oil-water transportation, enhancing energy efficiency and reducing environmental impact without necessitating pipeline expansion.

Introduction

The introduction of this research paper discusses the significant role of high-molecular-weight polymers in turbulent drag reduction, particularly within the petroleum industry’s pipeline transportation systems. The use of flexible polymer chains, such as polyethylene oxide and polyacrylamide derivatives, has been shown to effectively suppress frictional pressure losses in turbulent flows without significantly altering fluid viscosity. This capability is crucial for optimizing energy efficiency and reducing operational costs in crude oil transportation, where maintaining high throughput is essential. The viscoelastic properties of these polymer solutions interact with turbulent structures near the pipe wall, leading to reduced vortex generation and altered momentum transfer dynamics.

While drag-reducing polymers have been validated in single-phase Newtonian flows, their behavior in multiphase systems, such as oil-water mixtures, presents complex challenges. Research indicates that the effectiveness of these additives is influenced by various factors, including phase distribution, viscosity contrasts, and turbulence intensity, often resulting in non-monotonic behaviors. Despite promising results in controlled experiments, gaps remain in understanding the long-term stability and optimization of polymer injection in multiphase operations. This study aims to address these gaps by developing a predictive framework using response surface methodology (RSM) to optimize drag reduction in oil-water two-phase flows. The research introduces a statistically validated model that captures the nonlinear dependencies of flow rates and polymer concentrations, providing insights into optimal operating conditions and enhancing energy efficiency in industrial applications. Notably, this work is the first to systematically apply RSM for multiparameter optimization in this context, linking rheological properties with practical performance metrics and highlighting the dominant influence of oil flow rate on drag reduction variability.

Results

The results section presents a comprehensive analysis of the rheological properties and drag reduction performance of aqueous Polyethylene Oxide (PEO) solutions in oil-water two-phase flow. Flow curves obtained from rotational rheometry demonstrate that PEO solutions exhibit significantly lower shear stresses compared to the reference oil phase, with shear stress values for the highest concentration (250 ppm) reaching only about 0.33 Pa at shear rates of 100 s⁻¹, compared to 1.5 Pa for the oil. The PEO solutions display predominantly Newtonian behavior with slight shear-thinning tendencies at higher concentrations, indicating that the solutions remain within a dilute to semi-dilute unentangled regime. This rheological behavior suggests that the observed drag reduction in turbulent flow is not due to increased viscosity but rather the viscoelastic properties of the polymer, which suppress turbulent structures through mechanisms consistent with the Toms effect.

The analysis of drag reduction percentages (DR%) across varying flow rates and polymer concentrations reveals three key trends: an inverted-U relationship with water flow rate, a monotonic degradation of DR% with increasing oil flow rate, and a saturating positive effect of polymer concentration. The optimal conditions for drag reduction are identified at water flow rates of approximately 30-40 L/min and polymer concentrations between 150-200 ppm. Response Surface Methodology (RSM) is employed to model the drag reduction behavior, leading to the development of a quadratic model that effectively captures the complex interactions and curvature effects within the system. The final predictive equation for DR% is established, highlighting the significant influences of water flow rate, oil flow rate, and polymer concentration on drag reduction performance, while emphasizing the need for careful optimization to balance these factors for effective turbulence modulation in oil-water transport systems.

Discussion

The research investigates turbulent drag reduction in horizontal oil-water two-phase flows enhanced by polyethylene oxide (PEO) addition, utilizing a closed-loop recirculating facility designed for precise measurements. The facility, constructed from 304 stainless steel, features a 10 m long test section that ensures fully developed turbulent conditions, with a focus on maintaining smooth-wall characteristics to isolate the effects of PEO on drag reduction. The study employs rigorous calibration and validation protocols for all measurement instruments, confirming that the experimental setup adheres to the necessary hydrodynamic conditions for accurate assessment of the drag-reducing performance of PEO solutions.

Key findings indicate that PEO concentrations between 150-200 ppm yield optimal drag reduction rates exceeding 65%, with an average flow increase of 39.6% and a corresponding reduction in pumping energy consumption by approximately 29%. The research establishes a robust response surface methodology (RSM) model, demonstrating high predictive accuracy (adjusted R² = 0.9979) and revealing that oil flow rate negatively impacts drag reduction efficiency, while PEO concentration and water flow rate exhibit optimal ranges for enhanced performance. This study provides a comprehensive framework for optimizing drag reduction in industrial oil-water transportation systems, thereby contributing to improved efficiency and reduced environmental impact.