DOI: https://doi.org/10.46632/jame/5/2/1
تاريخ النشر: 2026-05-02
المؤلف: Chandrasekar Raja
الموضوع الرئيسي: عمليات تحويل الكتلة الحيوية الحرارية الكيميائية
نظرة عامة
تقيّم هذه الدراسة ملاءمة خمسة مواد من الكتلة الحيوية—قشرة عباد الشمس، الخشب الصلب، قش القمح، بقايا قصب السكر، وذرة الذرة—لعملية التحلل الحراري باستخدام نموذج المنتج الموزون (WPM). تستند التقييمات إلى أربعة معايير: السليلوز، الهيميسليلوز، المواد المتطايرة، ومحتوى الرطوبة، مع وزن متساوي لكل معلمة. تشير النتائج إلى أن ذرة الذرة هي المادة الأكثر ملاءمة، حيث حققت درجة تفضيل تبلغ 0.95139 بسبب محتواها العالي من السليلوز (33.33%) والهيميسليلوز (186.41%)، بالإضافة إلى انخفاض محتوى الرطوبة (18.89%). تليها بقايا قصب السكر وقشرة عباد الشمس بدرجات 0.83166 و0.82794، على التوالي، مما يدل على إمكانات قوية على الرغم من انخفاض مستويات السليلوز والهيميسليلوز. في المقابل، يحتل الخشب الصلب وقش القمح مرتبة أقل (0.74932 و0.74314) بسبب ارتفاع محتوى الرطوبة والمكونات ذات الكثافة الطاقية المنخفضة، مما يجعلها أقل كفاءة في التحلل الحراري.
تؤكد الدراسة على فعالية منهجية WPM في مقارنة مواد الكتلة الحيوية بشكل منهجي لعمليات التحلل الحراري، مما يبرز الدور الحاسم لتكوين المواد في تحسين إنتاج الطاقة وكفاءة المعالجة. تدعو النتائج إلى استخدام ذرة الذرة كأفضل كتلة حيوية لتطبيقات التحلل الحراري، مع بقايا قصب السكر وقشرة عباد الشمس كبدائل قابلة للتطبيق، بينما يعتبر الخشب الصلب وقش القمح أقل تفضيلاً. توفر هذه التقييمات الشاملة رؤى قيمة لتعزيز اختيار الكتلة الحيوية في عمليات تحويل النفايات إلى طاقة.
مقدمة
تناقش مقدمة ورقة البحث التركيب المعقد لدخان السجائر، الذي يحتوي على أكثر من 4,800 مركب، العديد منها سامة. تؤكد الحاجة إلى تحديد المصادر وعمليات تشكيل هذه المكونات، مع التركيز بشكل خاص على التبغ، وهو نبات كتلة حيوية يحتوي على حوالي 2,500 مركب كيميائي. يحدث تشكيل دخان التبغ عند درجات حرارة عالية (تصل إلى 950 درجة مئوية) في ظروف أكسجين متغيرة، مما يعقد نقل الكتلة الحيوية إلى مرافق المعالجة. يتم تسليط الضوء على طرق المعالجة المسبقة المحلية، وخاصة التحلل الحراري السريع، كحلول فعالة لهذه التحديات اللوجستية.
تستعرض الورقة التقدم في تصميم المفاعلات لعمليات التحلل الحراري، وخاصة مفاعلات السرير المخروطي المطروح التي تم تطويرها في جامعة إقليم الباسك. تظهر هذه المفاعلات مزايا مقارنة بالأسرة السائلة التقليدية، مثل تحسين توزيع تدفق الغاز وخلط المواد الصلبة. تشير الأبحاث إلى أن الأسرة المطروحة يمكنها معالجة الكتلة الحيوية بكفاءة دون الحاجة إلى مواد خاملة وتقترح أن هناك حاجة لمزيد من تحسين تكوينات المفاعلات وظروف التشغيل لتعزيز الكفاءة وتقليل التكاليف. بالإضافة إلى ذلك، تتناول المراجعة الآثار البيئية لعمليات التحلل الحراري للنفايات الصلبة البلدية (MSW)، مستكشفة تقنيات المفاعلات، وتخفيف الملوثات، وإمكانية أن تعمل النفايات الصلبة البلدية كمصدر موثوق للطاقة.
الطرق
في هذه الدراسة، يستخدم المؤلفون منهجية نموذج المنتج الموزون (WPM) لتحليل شبكات المستشعرات الذكية، مع التركيز على تحسين إدارة مناطق HVAC للحفاظ على الطاقة مع ضمان راحة الشاغلين. تتضمن التحليلات استراتيجيات مختلفة للكشف عن الشواغر وتقيّم أداء وحدات معالجة الهواء (AHUs)، التي تتكون من مكونات مثل المرطبات، والفلاتر، وملفات التبريد المدمجة في بنية المبنى. WPM، وهي تقنية اتخاذ القرار متعددة المعايير (MCDM)، تستخدم الضرب كعمليتها الرياضية الأساسية، على عكس نموذج المجموع الموزون (WSM). تصنف الدراسة البدائل بناءً على أداء متوسط مربع مرجح، على الرغم من أنها لا تأخذ في الاعتبار الأهمية النسبية للمسافات بين الخيارات.
تقيّم الأبحاث تقنيات شبكات المستشعرات، بما في ذلك Bluetooth Low Energy، وWi-Fi، والراديو بعيد المدى، باستخدام معايير مثل طول الحزمة، وعرض النطاق الترددي، ومعدل أخذ العينات، وعدد العينات لكل حزمة. تشير النتائج إلى أن الهندسة الوراثية (A2) ظهرت كأفضل بديل، بينما كانت التكنولوجيا الحيوية (A5) الأقل تفضيلاً. تسلط الورقة الضوء على فائدة منهجيات MCDM في التنقل عبر سيناريوهات اتخاذ القرار المعقدة عبر مجالات مختلفة، بما في ذلك تحليل المشاريع واختيار الموردين. من خلال تطبيق WPM وPROMETHEE، يهدف المؤلفون إلى تحديد الحلول المثلى لتطبيقات محددة، مثل اختيار تقنيات التعدين وتحديد المواقع المناسبة لمرافق الطاقة الكهرومائية الصغيرة، مع الاعتراف بحدود WPM فيما يتعلق بوزن المعايير.
المناقشة
تقيّم التحليلات المقدمة في هذا القسم مواد الكتلة الحيوية المختلفة لعمليات التحلل الحراري باستخدام منهجية نموذج المنتج الموزون (WPM)، مع التركيز على العوامل التركيبية الرئيسية: السليلوز، الهيميسليلوز، المواد المتطايرة، ومحتوى الرطوبة. تشير النتائج إلى أن ذرة الذرة تظهر كأفضل مادة خام، حيث تحقق قيمة أداء تبلغ 1.000 بسبب تركيبتها المثلى من السليلوز العالي (33.33%) والهيميسليلوز (186.41%)، بالإضافة إلى محتوى رطوبة منخفض نسبيًا (18.89%). وهذا يضع ذرة الذرة كأفضل مرشح لإنتاج الطاقة الحيوية، مما يظهر كفاءة متفوقة في عمليات التحلل الحراري.
بالمقارنة، تحتل قشرة عباد الشمس وبقايا قصب السكر المرتبتين الثانية والثالثة كأكثر المواد ملاءمة، مع درجات تفضيل تبلغ 0.82794 و0.83166، على التوالي. تظهر قشرة عباد الشمس تركيبة متوازنة ولكن لديها محتوى رطوبة أعلى، بينما تستفيد بقايا قصب السكر، على الرغم من انخفاض مستويات السليلوز والهيميسليلوز، من انخفاض محتوى الرطوبة. يحتل الخشب الصلب وقش القمح مرتبة أقل، مع درجات 0.74932 و0.74314، على التوالي، بسبب خصائصهما الأقل تفضيلاً التي تؤثر على كفاءة التحلل الحراري. بشكل عام، تصنف طريقة WPM مواد الكتلة الحيوية بفعالية، مما يبرز أهمية العوامل التركيبية في تحسين المواد الخام لتحقيق عوائد طاقة عالية في عمليات التحلل الحراري.
DOI: https://doi.org/10.46632/jame/5/2/1
Publication Date: 2026-05-02
Author(s): Chandrasekar Raja
Primary Topic: Thermochemical Biomass Conversion Processes
Overview
This research evaluates the suitability of five biomass materials—sunflower shell, hardwood, wheat straw, sugarcane bagasse, and maize cob—for pyrolysis using the Weighted Product Model (WPM). The assessment is based on four criteria: cellulose, hemicellulose, volatile matter, and moisture content, with equal weighting for each parameter. The results indicate that maize cob is the most suitable feedstock, achieving a preference score of 0.95139 due to its high cellulose (33.33%) and hemicellulose (186.41%) content, coupled with low moisture (18.89%). Sugarcane bagasse and sunflower shell follow with scores of 0.83166 and 0.82794, respectively, demonstrating strong potential despite lower cellulose and hemicellulose levels. In contrast, hardwood and wheat straw rank lower (0.74932 and 0.74314) due to higher moisture content and lower energy-dense components, making them less efficient for pyrolysis.
The study underscores the effectiveness of the WPM methodology in systematically comparing biomass materials for pyrolysis, highlighting the critical role of material composition in optimizing energy yield and processing efficiency. The findings advocate for the use of maize cob as the ideal biomass for pyrolysis applications, with sugarcane bagasse and sunflower shell as viable alternatives, while hardwood and wheat straw are deemed less favorable. This comprehensive evaluation provides valuable insights for enhancing biomass selection in waste-to-energy conversion processes.
Introduction
The introduction of the research paper discusses the complex composition of cigarette smoke, which contains over 4,800 compounds, many of which are toxic. It emphasizes the need to identify the sources and formation processes of these constituents, particularly focusing on tobacco, a biomass plant with approximately 2,500 chemical compounds. The formation of tobacco smoke occurs at high temperatures (up to 950°C) in varying oxygen conditions, complicating the transportation of biomass to processing facilities. Localized pretreatment methods, especially rapid pyrolysis, are highlighted as effective solutions to these logistical challenges.
The paper reviews advancements in reactor designs for pyrolysis, particularly conical spouted bed reactors developed at the University of the Basque Country. These reactors demonstrate advantages over traditional fluidized beds, such as improved gas flow distribution and solid mixing. The research indicates that spouted beds can efficiently process biomass without the need for inert materials and suggests that further optimization of reactor configurations and operating conditions is necessary to enhance efficiency and reduce costs. Additionally, the review addresses the environmental implications of municipal solid waste (MSW) pyrolysis, exploring reactor technologies, pollutant mitigation, and the potential for MSW to serve as a reliable energy source.
Methods
In this study, the authors employ the Weighted Product Model (WPM) methodology to analyze smart sensor networks, focusing on optimizing HVAC zone management for energy conservation while ensuring occupant comfort. The analysis incorporates various vacancy detection strategies and evaluates the performance of air handling units (AHUs), which consist of components such as humidifiers, filters, and cooling coils integrated into the building’s infrastructure. WPM, a multi-criteria decision-making (MCDM) technique, utilizes multiplication as its primary mathematical operation, contrasting with the weighted sum model (WSM). The study ranks alternatives based on weighted mean square performance, although it does not account for the relative importance of distances between options.
The research evaluates sensor network technologies, including Bluetooth Low Energy, Wi-Fi, and Long-Range Radio, using parameters such as packet length, bandwidth, sampling rate, and sample count per packet. Findings indicate that genetic engineering (A2) emerged as the top-ranked alternative, while biotechnology (A5) was the least favorable. The paper highlights the utility of MCDM methodologies in navigating complex decision-making scenarios across various fields, including project analysis and supplier selection. By applying WPM and PROMETHEE, the authors aim to identify optimal solutions for specific applications, such as selecting mining techniques and determining suitable locations for small hydropower facilities, while acknowledging the limitations of WPM regarding the weighting of criteria.
Discussion
The analysis presented in this section evaluates various biomass materials for pyrolysis using the Weighted Product Model (WPM) methodology, focusing on key compositional factors: cellulose, hemicellulose, volatile matter, and moisture content. The findings indicate that corn cob emerges as the most suitable feedstock, achieving a performance value of 1.000 due to its optimal combination of high cellulose (33.33%) and hemicellulose (186.41%) content, along with relatively low moisture (18.89%). This positions corn cob as the best candidate for bioenergy production, demonstrating superior efficiency in pyrolysis processes.
In comparison, sunflower shell and sugarcane bagasse rank as the second and third most suitable materials, with preference scores of 0.82794 and 0.83166, respectively. Sunflower shell exhibits a balanced composition but has higher moisture content, while sugarcane bagasse, despite lower cellulose and hemicellulose levels, benefits from lower moisture. Hardwood and wheat straw rank lower, with scores of 0.74932 and 0.74314, respectively, due to their less favorable characteristics impacting pyrolysis efficiency. Overall, the WPM method effectively ranks biomass materials, highlighting the significance of compositional factors in optimizing feedstocks for high energy yields in pyrolysis processes.
