تحسين ظروف الاستخراج للبروتينات المتبقية في أقمشة الحرير القديمة Optimization of extraction conditions for residual proteins in aged silk fabrics

شارك:
المجلة: npj Heritage Science، المجلد: 14، العدد: 1
DOI: https://doi.org/10.1038/s40494-025-02074-2
تاريخ النشر: 2026-03-24
المؤلف: Jianghao Du وآخرون
الموضوع الرئيسي: تحليل مواد التراث الثقافي

طرق

في هذه الدراسة، استخدم الباحثون نهجًا منهجيًا لتحسين المعلمات لاستخراج البروتين المتبقي باستخدام منهجية سطح الاستجابة (RSM) التي تسهلها برمجية Design Expert 13. تم تنفيذ تصميم Box-Behnken بأربعة عوامل وثلاثة مستويات، مع التركيز على أربعة متغيرات مستقلة: النسب المولية لـ CaCl₂ إلى H₂O والإيثانول إلى H₂O، بالإضافة إلى درجة الحرارة ووقت الاستخراج. أسفر هذا التصميم عن إجمالي 30 تجربة تهدف إلى زيادة كفاءة الاستخراج، والتي تم تعريفها على أنها η (%).

لضمان موثوقية النتائج، تم تكرار كل حالة تجريبية ثلاث مرات، وتم الإبلاغ عن النتائج كمتوسط حسابي ± انحراف معياري (n = 3). تم الحفاظ على الدقة التحليلية بدقة، حيث تم الحفاظ على الانحراف المعياري النسبي (RSD) أقل من 5% لجميع القياسات، مما يؤكد قابلية إعادة الإنتاج وسلامة المنهجية للنتائج. لمزيد من التفاصيل حول المواد والكواشف المستخدمة، يتم توجيه القراء إلى القسم التكميلي S1 في المعلومات التكميلية.

نتائج

توضح قسم النتائج النتائج المستخلصة من التجارب الأولية التي تهدف إلى تحسين أربعة متغيرات رئيسية تؤثر على كفاءة استخراج البروتين (η): نسبة CaCl₂ إلى H₂O، نسبة الإيثانول إلى H₂O، درجة الحرارة، ووقت الاستخراج. كانت كفاءة الاستخراج الأساسية مع محلول الكالسيوم والإيثانول التقليدي 36.83%، والتي تحسنت إلى 45.33% عند تطبيق الظروف المثلى، مما يبرز أهمية تحسين المعلمات بشكل منهجي.

تكشف الدراسة أن نسبة CaCl₂ إلى H₂O تؤثر بشكل كبير على η، حيث أن النسبة المثلى تبلغ حوالي 0.025 مما يؤدي إلى أقصى كفاءة بسبب التدمير الفعال للروابط الهيدروجينية في الألياف الحريرية بواسطة أيونات Ca²⁺ و Cl⁻. ومع ذلك، تؤدي تركيزات CaCl₂ المفرطة إلى الحماية الكهروستاتيكية والجفاف، مما يقلل من η. وبالمثل، تعزز نسبة الإيثانول إلى H₂O في البداية η ولكنها تنخفض بعد عتبة 0.35، حيث يؤدي زيادة الإيثانول إلى تعطيل توفر الأيونات. تظهر تقلبات درجة الحرارة أن η تصل إلى ذروتها عند حوالي 90 °م، حيث تحسن الحركة الجزيئية المعززة الاستخراج، ولكن الحرارة المفرطة يمكن أن destabilize البروتينات. أخيرًا، بينما تعزز أوقات الاستخراج الأطول في البداية الذوبان، يمكن أن تؤدي الفترات الطويلة إلى تدهور البروتين وتجمعه، مما يقلل في النهاية من η.

مناقشة

في هذه الدراسة، قام المؤلفون بتحسين استخراج البروتين من الأقمشة الحريرية باستخدام محلول كلوريد الكالسيوم والإيثانول، مستخدمين منهجية سطح الاستجابة (RSM) لنمذجة وتوقع كفاءة الاستخراج. تشمل المتغيرات الرئيسية التي تم تحليلها نسبة CaCl₂ إلى H₂O، نسبة الإيثانول إلى H₂O، درجة الحرارة، ووقت الاستخراج. كانت الظروف المثلى المحددة هي نسبة مولية لـ CaCl₂/الإيثانول/H₂O تبلغ 0.032:0.354:1، ودرجة حرارة 86 °م، ووقت استخراج 248 دقيقة، مما حقق أقصى كفاءة استخراج ($\eta$) تبلغ 46.523%. أظهرت الدراسة أن هذه المعلمات المحسنة عززت بشكل كبير كفاءة الاستخراج عبر فترات الشيخوخة المختلفة لعينات الحرير، مما ساعد بشكل خاص في الحفاظ على الوزن الجزيئي والحفاظ على سلامة الهيكل الثانوي، وهو أمر حاسم للحفاظ على بروتينات الحرير.

تؤكد النتائج فعالية RSM في تحسين بروتوكولات الاستخراج، حيث تكشف أن الظروف المحسنة أدت إلى تحسينات ملحوظة في استرداد البروتين، خاصة في العينات ذات الشيخوخة المتوسطة. كما أبرزت الدراسة أهمية التفاعل بين معلمات الاستخراج، حيث كانت تركيز الكالسيوم ودرجة الحرارة عوامل حاسمة تؤثر على كفاءة الاستخراج. توفر النتائج إطارًا منهجيًا قويًا لاسترداد بقايا البروتين في علوم التراث، مع خطط للتطبيق المستقبلي على قطع الحرير الأثرية الأصلية، مما يؤكد الأهمية العملية للبروتوكول المحسن.

Journal: npj Heritage Science, Volume: 14, Issue: 1
DOI: https://doi.org/10.1038/s40494-025-02074-2
Publication Date: 2026-03-24
Author(s): Jianghao Du et al.
Primary Topic: Cultural Heritage Materials Analysis

Methods

In this study, the researchers employed a systematic approach to optimize the parameters for residual protein extraction using Response Surface Methodology (RSM) facilitated by Design Expert 13 software. A four-factor, three-level Box-Behnken Design (BBD) was implemented, focusing on four independent variables: the molar ratios of CaCl₂ to H₂O and ethanol to H₂O, along with temperature and extraction time. This design resulted in a total of 30 experimental runs aimed at maximizing extraction efficiency, defined as η (%).

To ensure the reliability of the findings, each experimental condition was replicated three times, and results were reported as the arithmetic mean ± standard deviation (n = 3). The analytical precision was rigorously maintained, with the relative standard deviation (RSD) kept below 5% for all measurements, thereby confirming the reproducibility and methodological integrity of the results. For further details on the reagents and materials used, readers are directed to Supplementary Section S1 in the Supplementary Information.

Results

The results section outlines the findings from preliminary experiments aimed at optimizing four key variables affecting protein extraction efficiency (η): CaCl₂-to-H₂O molar ratio, ethanol-to-H₂O molar ratio, temperature, and extraction time. The baseline extraction efficiency with a conventional calcium-ethanol solution was 36.83%, which improved to 45.33% when optimal conditions were applied, highlighting the importance of systematic parameter optimization.

The study reveals that the CaCl₂-to-H₂O molar ratio significantly influences η, with an optimal ratio of approximately 0.025 yielding maximum efficiency due to the effective disruption of hydrogen bonds in silk fibroins by Ca²⁺ and Cl⁻ ions. However, excessive CaCl₂ concentrations lead to electrostatic shielding and dehydration, reducing η. Similarly, the ethanol-to-H₂O molar ratio initially enhances η but declines beyond a threshold of 0.35, as increased ethanol disrupts ion availability. Temperature variations show that η peaks at around 90 °C, where enhanced molecular mobility improves extraction, but excessive heat can destabilize proteins. Finally, while longer extraction times initially boost solubilization, prolonged durations can cause protein degradation and aggregation, ultimately decreasing η.

Discussion

In this study, the authors optimized protein extraction from silk fabrics using a calcium chloride-ethanol solution, employing Response Surface Methodology (RSM) to model and predict extraction efficiency. The key variables analyzed included the CaCl₂-to-H₂O molar ratio, ethanol-to-H₂O molar ratio, temperature, and extraction time. The optimal conditions identified were a CaCl₂/ethanol/H₂O molar ratio of 0.032:0.354:1, a temperature of 86 °C, and an extraction time of 248 minutes, achieving a maximum extraction efficiency ($\eta$) of 46.523%. The study demonstrated that these optimized parameters significantly enhanced extraction efficiency across various aging durations of silk samples, particularly preserving molecular weight and maintaining secondary structural integrity, which is crucial for the conservation of silk proteins.

The findings underscore the effectiveness of RSM in refining extraction protocols, revealing that the optimized conditions led to notable improvements in protein recovery, especially in samples with moderate aging. The study also highlighted the importance of the interaction between extraction parameters, with calcium concentration and temperature being critical factors influencing extraction efficiency. The results provide a robust methodological framework for the recovery of proteinaceous residues in heritage science, with plans for future application to authentic archaeological silk artifacts, thereby confirming the practical relevance of the optimized protocol.