تحقيق XPS لمركبات Co–Ni المؤكسدة باستخدام نسبة الذروة إلى القمر الصناعي. التطبيق على هيكل الطبقة السلبية Co20Ni80 وتركيبها
XPS Investigation of Co–Ni Oxidized Compounds Surface Using Peak-On-Satellite Ratio. Application to Co20Ni80 Passive Layer Structure and Composition

شارك:
المجلة: ACS Omega، المجلد: 9، العدد: 39
DOI: https://doi.org/10.1021/acsomega.4c05082
PMID: https://pubmed.ncbi.nlm.nih.gov/39371995
تاريخ النشر: 2024-09-18
المؤلف: Barbara Laïk وآخرون
الموضوع الرئيسي: تقنيات مطيافية الإلكترون والأشعة السينية

نظرة عامة

تقدم الورقة البحثية دراسة تركز على تطوير منهجية لتحليل الطيف الضوئي للأشعة السينية (XPS) لتوصيف الأفلام المؤكسدة الأصلية على أسطح النيكل والكوبالت وسبائك Co20Ni80. تتضمن المنهجية تحليل طيف مستوى النواة 2p باستخدام نسبة الذروة إلى القمر الصناعي (SR)، والتي تقارن بتلك الخاصة بالمركبات النقية لتحديد تركيبة طبقة السطح. تشير النتائج إلى أن المنطقة المضطربة من مركبات النيكل والكوبالت المؤكسدة تبلغ حوالي نانومتر واحد، مما يكشف عن تفاعل معقد للأكاسيد والهيدروكسيدات والأوكسيهيدروكسيدات.

تتوافق نتائج الدراسة مع الأدبيات الموجودة، مما يمكّن من تطبيق المنهجية المطورة على سبيكة Co20Ni80. تسلط الأبحاث الضوء على ضرورة دمج تحليل XPS مع التقنيات الكهروكيميائية، خاصةً بالنسبة للطلاءات المعرضة للأكسدة المطولة أو ظروف الخدمة الشديدة. علاوة على ذلك، يُقترح أن تكون منهجية XPS المقترحة قابلة للتطبيق على سبائك المعادن الانتقالية الأخرى التي تظهر ميزات قمر صناعي في أطياف 2p الخاصة بها، مما قد يوسع من فائدتها في علوم المواد.

مقدمة

تسلط المقدمة الضوء على أهمية النيكل والكوبالت وسبائكهما بسبب خصائصهما الكيميائية والفيزيائية الفريدة، التي تمكن من مجموعة متنوعة من التطبيقات، خاصةً في انتقال الطاقة من خلال إنتاج الهيدروجين منخفض الكربون. تظهر هذه السبائك جهد هيدروجين منخفض ونشاط كهرومحفز ممتاز لتحليل الماء في وسط قلوي. بالإضافة إلى ذلك، تُستخدم سبائك Ni-Co في المواد المغناطيسية لأجهزة الاستشعار الدقيقة، والمكثفات، والمحولات، وتُعد صلابتها ومقاومتها للتآكل بدائل مناسبة للكروم الصلب في صناعات السيارات والطيران. غالبًا ما يتم استخدام السبائك كأفلام رقيقة، يمكن تصنيعها باستخدام تقنيات مختلفة مثل الرش والت deposition الكهروكيميائي.

تؤكد الدراسة على أهمية فهم بنية وتركيبة الطبقة السلبية التي تتشكل على سطح السبيكة، حيث تؤثر بشكل مباشر على مقاومة التآكل. تحقق أعمال دورينلور العلاقة بين المعلمات الميكروهيكلية ومقاومة التآكل في سبائك Co20Ni80 المنتجة عبر الصهر والتشكيل الكهربائي. تستخدم الأبحاث تحليل الطيف الضوئي للأشعة السينية (XPS) لتحليل التركيب الكيميائي والبنية الطوبولوجية للطبقة السلبية، مع التركيز على المركبات المرجعية مثل CoO وNiO. تم تقديم طريقة جديدة تجمع بين تحليل ذروة مستوى النواة مع شدة الذروة القمر الصناعي لاستنتاج التركيب الكيميائي لطبقة السطح، مما يكشف عن اختلافات بين التركيبات السطحية والكتلية. تم الاعتراف بتعقيد تفسير أطياف XPS في سياق طبقات تمرير السبيكة، مع الإشارة إلى الأدبيات الموجودة التي توضح الخصائص الطيفية لمركبات النيكل والكوبالت.

طرق

في هذه الدراسة، تم تصنيع سبيكة Co20Ni80 عن طريق صهر معادن الكوبالت والنيكل عالية النقاء في فرن تحريض كهرومغناطيسي عالي التردد تحت جو الهيليوم، تلا ذلك صب الجاذبية في شكل قضيب. تم بعد ذلك تقطيع القضيب وطحنه ميكانيكيًا لإعداد عينات للتوصيف. تم إجراء تحليل حيود الأشعة السينية (XRD) باستخدام جهاز حيود PANalytical XPert Pro مع إشعاع Co-Kα، وتم استخدام طرق مختلفة، بما في ذلك تقنيات Rietveld وPawley، لتحليل أنماط الحيود الناتجة لأكاسيد وهيدروكسيدات الكوبالت والنيكل.

تضمن إعداد Co(OH)2 إذابة Co(NO3)2·6H2O في خليط من الماء منزوع الأيونات/الإيثانول، تلا ذلك إضافة فائض من NaOH لتكوين راسب، تم تصفيته وتجفيفه. أكد نمط XRD الهيكل السداسي لـ Co(OH)2، مع معلمات الخلية $a = 0.3180 \, \text{nm}$ و $c = 0.4657 \, \text{nm}$. تم تصنيع CoO(OH) من خلال عملية من خطوتين تتضمن أكسدة Co(OH)2 باستخدام H2O2، مما أسفر عن هيكل معيني مع معلمات خلوية $a = 0.2854 \, \text{nm}$ و $c = 1.3205 \, \text{nm}$. تم الحصول على Co3O4 من التحلل الحراري لـ Co(OH)2 عند 350 درجة مئوية، بينما تم إعداد Ni(OH)2 وNiCo2O4 باستخدام طرق مماثلة، حيث تضمنت الأخيرة حمض الأكساليك كعامل معقد. كانت أنماط XRD لجميع المواد المصنعة متسقة مع قيم الأدبيات، مما يؤكد سلامتها الهيكلية.

نتائج

يقدم قسم “النتائج” في الورقة البحثية النتائج الرئيسية المستمدة من التجارب أو التحليلات التي تم إجراؤها. يوضح النتائج الناتجة عن اختبارات مختلفة، مع تسليط الضوء على العلاقات الإحصائية الهامة والظواهر الملحوظة. غالبًا ما يتم توضيح النتائج من خلال الجداول أو الرسوم البيانية أو الأشكال، التي توفر تمثيلًا بصريًا للبيانات وتعزز فهم النتائج.

بالإضافة إلى ذلك، قد يناقش القسم تداعيات النتائج فيما يتعلق بالفرضيات المطروحة في بداية الدراسة. من الضروري ملاحظة أي نتائج غير متوقعة أو شذوذ، حيث يمكن أن تقدم رؤى حول الآليات الأساسية أو تقترح مجالات لمزيد من التحقيق. بشكل عام، تسهم النتائج في النقاش الأوسع ضمن المجال، داعمة أو متحدية النظريات القائمة بناءً على الأدلة التجريبية.

مناقشة

في هذا القسم، يناقش المؤلفون تحليل السطح لمركبات النيكل (Ni) والكوبالت (Co) باستخدام تحليل الطيف الضوئي للأشعة السينية (XPS) بالاقتران مع رش الأيونات الأرجونية. تم إجراء XPS باستخدام جهاز طيفي Thermo Electron Kalpha، مستفيدين من مصدر الأشعة السينية أحادية اللون Al Kα عند ضغط فراغ يقارب $10^{-9}$ مbar. شمل التحليل معايرة دقيقة ورش أيونات منخفضة الطاقة (200 eV) لتقليل الضرر وضمان تطور طيفي دقيق أثناء إزالة المادة. ركزت الدراسة على الخصائص الطيفية لمركبات Ni وCo، كاشفة عن قمم طاقة ربط مميزة وهياكل متعددة تعكس حالات الأكسدة المختلفة والبيئات الكيميائية.

تشير النتائج إلى أن طيف Ni 2p يظهر قمة بارزة عند 853.3 eV للنيكل المعدني (Ni$^0$) وهيكل مزدوج لـ NiO، بينما تعرض الهيدروكسيدات والأوكسيهيدروكسيدات قمة واحدة عند حوالي 857.0 eV. يبرز المؤلفون أهمية القمم القمر الصناعي في التمييز بين مختلف مركبات النيكل، حيث تعتبر نسبة القمر الصناعي (SR) معلمة مفيدة لتحديد المركبات. بالمثل، يظهر طيف Co 2p ميزات معقدة مرتبطة بحالات Co$^{2+}$ وCo$^{3+}$، مع ظهور قمم قمر صناعي نتيجة لتأثيرات التهجين. تقترح الدراسة طريقة للتحليل الكمي لتركيبات السطح بناءً على نسبة الذروة إلى القمر الصناعي، مما يسمح بتمييز الأنواع المؤكسدة في العينات المختلطة. بشكل عام، تسهم الأبحاث في فهم أعمق للكيمياء السطحية لأكاسيد Ni وCo، والأوكسيهيدروكسيدات، والهيدروكسيدات، مما يبرز أهمية XPS في توصيف هذه المواد.

Journal: ACS Omega, Volume: 9, Issue: 39
DOI: https://doi.org/10.1021/acsomega.4c05082
PMID: https://pubmed.ncbi.nlm.nih.gov/39371995
Publication Date: 2024-09-18
Author(s): Barbara Laïk et al.
Primary Topic: Electron and X-Ray Spectroscopy Techniques

Overview

The research paper presents a study focused on developing a methodology for X-ray Photoelectron Spectroscopy (XPS) to characterize the native oxidized films on nickel, cobalt, and the Co20Ni80 alloy surfaces. The methodology involves analyzing the 2p core level spectra using the peak on satellite ratio (SR), which is compared to that of pure compounds to determine the surface layer composition. The findings indicate that the perturbed zone of oxidized nickel and cobalt compounds is approximately one nanometer, revealing a complex interplay of oxides, hydroxides, and oxyhydroxides.

The study’s results align with existing literature, enabling the application of the developed methodology to the Co20Ni80 alloy. The research highlights the necessity of coupling XPS analysis with electrochemical techniques, particularly for coatings subjected to prolonged oxidation or severe service conditions. Furthermore, the proposed XPS methodology is suggested to be applicable to other transition metal alloys that exhibit satellite features in their 2p spectra, potentially broadening its utility in materials science.

Introduction

The introduction highlights the significance of nickel, cobalt, and their alloys due to their unique chemical and physical properties, which enable a variety of applications, particularly in the energy transition through low-carbon hydrogen production. These alloys exhibit low hydrogen overpotential and excellent electrocatalytic activity for water electrolysis in alkaline media. Additionally, Ni-Co alloys are utilized in magnetic materials for micro-sensors, accumulators, and inductors, and their hardness and corrosion resistance make them suitable alternatives to hard chromium in automotive and aerospace industries. The alloys are often employed as thin films, which can be fabricated using various techniques such as sputtering and electrochemical deposition.

The study emphasizes the importance of understanding the passive layer’s structure and composition formed on the alloy surface, as it directly influences corrosion resistance. Dorenlor’s work investigates the relationship between microstructural parameters and corrosion resistance in Co20Ni80 alloys produced via melting and electroforming. The research employs X-ray photoemission spectroscopy (XPS) to analyze the chemical composition and topological structure of the passive layer, focusing on reference compounds like CoO and NiO. A novel method combining core-level peak analysis with satellite peak intensity is introduced to deduce the surface layer’s chemical composition, revealing variations between surface and bulk compositions. The complexity of interpreting XPS spectra in the context of alloy passivation layers is acknowledged, with references to existing literature that elucidates the spectral characteristics of nickel and cobalt compounds.

Methods

In this study, the Co20Ni80 alloy was synthesized by melting high-purity cobalt and nickel metals in a high-frequency electromagnetic induction furnace under a helium atmosphere, followed by gravity casting into an ingot. The ingot was subsequently sliced and mechanically ground to prepare samples for characterization. X-ray diffraction (XRD) analysis was conducted using a PANalytical XPert Pro diffractometer with Co-Kα radiation, and various methods, including the Rietveld and Pawley techniques, were employed to analyze the resulting diffraction patterns of cobalt and nickel oxides and hydroxides.

The preparation of Co(OH)2 involved dissolving Co(NO3)2·6H2O in a deionized water/ethanol mixture, followed by the addition of excess NaOH to form a precipitate, which was then filtered and dried. The XRD pattern confirmed the hexagonal structure of Co(OH)2, with cell parameters $a = 0.3180 \, \text{nm}$ and $c = 0.4657 \, \text{nm}$. CoO(OH) was synthesized through a two-step process involving the oxidation of Co(OH)2 with H2O2, yielding a rhombohedral structure with cell parameters $a = 0.2854 \, \text{nm}$ and $c = 1.3205 \, \text{nm}$. Co3O4 was obtained by thermal decomposition of Co(OH)2 at 350°C, while Ni(OH)2 and NiCo2O4 were prepared using similar methods, with the latter involving oxalic acid as a complexing agent. The XRD patterns for all synthesized materials were consistent with literature values, confirming their structural integrity.

Results

The “Results” section of the research paper presents the key findings derived from the conducted experiments or analyses. It details the outcomes of various tests, highlighting significant statistical relationships and observed phenomena. The results are often illustrated through tables, graphs, or figures, which provide a visual representation of the data and enhance the understanding of the findings.

Additionally, the section may discuss the implications of the results in relation to the hypotheses posed at the outset of the study. It is crucial to note any unexpected outcomes or anomalies, as these can offer insights into the underlying mechanisms or suggest areas for further investigation. Overall, the results contribute to the broader discourse within the field, supporting or challenging existing theories based on empirical evidence.

Discussion

In this section, the authors discuss the surface analysis of nickel (Ni) and cobalt (Co) compounds using X-ray photoelectron spectroscopy (XPS) combined with argon ion sputtering. The XPS was conducted with a Thermo Electron Kalpha spectrometer, utilizing a monochromatic Al Kα X-ray source at a vacuum of approximately $10^{-9}$ mbar. The analysis involved careful calibration and low-energy ion sputtering (200 eV) to minimize damage and ensure accurate spectral evolution during material removal. The study focused on the spectral characteristics of Ni and Co compounds, revealing distinct binding energy peaks and multiplet structures that correspond to different oxidation states and chemical environments.

The findings indicate that the Ni 2p spectrum exhibits a prominent peak at 853.3 eV for metallic nickel (Ni$^0$) and a doublet structure for NiO, while hydroxides and oxyhydroxides display a single peak at approximately 857.0 eV. The authors highlight the significance of satellite peaks in distinguishing between various nickel compounds, with the satellite ratio (SR) serving as a useful parameter for compound identification. Similarly, the Co 2p spectrum shows complex features linked to Co$^{2+}$ and Co$^{3+}$ states, with satellite peaks arising from hybridization effects. The study proposes a method for quantitative analysis of surface compositions based on the peak-to-satellite ratio, allowing for the differentiation of oxidized species in mixed samples. Overall, the research contributes to a deeper understanding of the surface chemistry of Ni and Co oxides, oxyhydroxides, and hydroxides, emphasizing the importance of XPS in characterizing these materials.