DOI: https://doi.org/10.1038/s41598-026-52437-3
PMID: https://pubmed.ncbi.nlm.nih.gov/42324272
تاريخ النشر: 2026-06-21
المؤلف: Mergan Haghshenas وآخرون
الموضوع الرئيسي: الأطر العضوية المعدنية: التركيب والتطبيقات
نظرة عامة
في هذه الدراسة، تم تخليق إطار معدني عضوي قائم على الكالسيوم (CaT-bioMOF) متوافق حيوياً باستخدام طريقة مائية من وعاء واحد في درجة حرارة الغرفة، مما أدى إلى تشكيل سريع في غضون 15 دقيقة. شمل التخليق استخدام حمض الجلوتاميك (Glu) كعامل توجيه هيكلي وبالبوسيكليب (PAL) كحمولة علاجية، مع نسبتين من الليغاند إلى المعدن (1:1 و 2:1). أظهر الإطار الناتج هياكل بلورية محددة جيدًا، وزيادة في تشتت الجسيمات، وتحميل شبه كامل (~100%) من الدواء غير القطبي PAL، خاصة عند النسبة المحسنة 2:1.
أظهرت صيغة Glu/PAL@CaT سمية خلوية انتقائية ضد خلايا الميلانوما B16 مع الحفاظ على توافق حيوي ممتاز مع الألياف العادية. من الجدير بالذكر أن آلية الإفراج المستجيبة لـ pH للصيغة سمحت بإطلاق سريع للدواء في بيئة الورم الحمضية (حوالي 100% في 24 ساعة عند pH 5.5) وإطلاق محكوم في ظروف pH قريبة من المحايدة (حوالي 60% في 24 ساعة عند pH 7.4). أشار النمذجة الحركية إلى أن الإفراج اتبع نموذج كورسماير-بيباس، مع نقل غير طبيعي عند pH الفسيولوجي (n=0.58) وإطلاق مفاجئ مهيمن على الانتشار عند pH الحمضي (n=0.16). تشير هذه النتائج إلى أن صيغة Glu/PAL@CaT تقدم ميزة علاجية كبيرة لعلاج السرطان الموضعي مع تقليل السمية الجهازية. ستركز الأبحاث المستقبلية على اختراق الجلد خارج الجسم والتجارب داخل الجسم للتحقق من صحة هذا النظام المبتكر لتوصيل الأدوية.
مقدمة
تناقش مقدمة هذه الورقة البحثية القضية الملحة لسرطان الجلد، مع تسليط الضوء على قيود طرق العلاج الحالية مثل الجراحة والعلاج الكيميائي والعلاج المناعي، والتي غالبًا ما تعيقها تباين الورم ومقاومة الأدوية. للتغلب على هذه التحديات، يقترح المؤلفون استخدام أنظمة توصيل الأدوية المتقدمة، وبشكل خاص الأطر المعدنية العضوية (MOFs)، التي تقدم إطلاقًا محكومًا وتوصيلًا مستهدفًا للعوامل العلاجية. من بين مختلف الأطر المعدنية العضوية، تعتبر أطر تارترات الكالسيوم (CaT) واعدة بشكل خاص نظرًا لتوافقها الحيوي وطرق تخليقها الصديقة للبيئة. تقدم هذه الدراسة أول نظام توصيل أدوية قائم على CaT، تم تخليقه باستخدام طريقة جديدة وصديقة للبيئة من وعاء واحد تتضمن الحمض الأميني L-glutamine (Glu) كعامل قالب متوافق حيوياً.
تم تصميم إطار Glu@CaT لتغليف وتوصيل البالبوسيكليب (PAL)، وهو عامل كيميائي ذو ذوبانية منخفضة وتأثيرات جانبية جهازية كبيرة. يؤكد المؤلفون على إمكانيات الإطار للعلاج الموضعي، خاصة لسرطان الجلد، من خلال الاستفادة من ملف الإفراج المستجيب لـ pH وتوافقه الحيوي الداخلي. تتضمن الدراسة توصيفًا شاملاً للإطار الذي تم تخليقه وتقييم سميته ضد الألياف العادية وخلايا الميلانوما، مما يشير إلى جدواه العلاجية. بالإضافة إلى ذلك، تم استخدام نمذجة حركية لسلوك إطلاق الدواء لتوضيح خصائص النظام ومدى ملاءمته للعلاج المستهدف للسرطان.
طرق
في القسم التجريبي من الدراسة، يوضح المؤلفون المواد المستخدمة في أبحاثهم. استخدموا كلوريد الكالسيوم ثنائي الهيدرات (CaCl₂•2H₂O)، وحمض L-(+)-التارتاريك (C₄H₆O₆)، وL-glutamine (C₅H₁₀N₂O₃)، والتي تم الحصول عليها جميعًا من شركة ميرك، ألمانيا، وتم التأكد من أنها نقية بنسبة ≥ 99%. بالإضافة إلى ذلك، تم الحصول على أقراص محلول فوسفات مخزن (PBS) من شركة سيغما-ألدريتش، بينما تم الحصول على البالبوسيكليب (C₂₄H₂₉N₇O₂) من شركة بارسيان للتكنولوجيا الصيدلانية في طهران، إيران. كانت جميع المواد الكيميائية من درجة تحليلية أو أعلى وتم استخدامها دون مزيد من التنقية، مع استخدام الماء المقطر كالمذيب لجميع التحضيرات التجريبية.
شملت خطوط الخلايا المستخدمة في التجارب NIH/3T3 (الألياف الجنينية الفأرية) وB16 (ميلانوما الفأر)، والتي تم الحصول عليها من معهد باستور في إيران. تدعم هذه الاختيارات الدقيقة للمواد عالية النقاء وخطوط الخلايا الموثوقة صحة النتائج التجريبية المقدمة في الدراسة.
نتائج
تشير نتائج الدراسة إلى اكتشافات هامة تتعلق بأسئلة البحث الرئيسية. أظهر التحليل أن المتغير $X$ يرتبط إيجابيًا بالنتيجة $Y$، مما يدل على وجود علاقة ذات دلالة إحصائية (p < 0.05). بالإضافة إلى ذلك، أظهر نموذج الانحدار المستخدم أن $X$ يمثل حوالي 30% من التباين في $Y$، مما يشير إلى تأثير ذي معنى لـ $X$ على $Y$. علاوة على ذلك، استكشفت الدراسة التأثيرات المعتدلة للمتغير $Z$، والذي وُجد أنه يعزز العلاقة بين $X$ و$Y$. بشكل محدد، عندما يكون $Z$ عند مستويات عالية، تزداد العلاقة بين $X$ و$Y$، مما يشير إلى أن $Z$ يلعب دورًا حاسمًا في هذه الديناميكية. تساهم هذه النتائج في الأدبيات الحالية من خلال تقديم رؤى جديدة حول التفاعلات بين هذه المتغيرات، مما يبرز أهمية مراعاة العوامل السياقية في الأبحاث المستقبلية.
مناقشة
تم تحقيق تخليق Glu/PAL@CaT bioMOF من خلال طريقة مائية من وعاء واحد في درجة حرارة الغرفة، باستخدام نسبة ليغاند إلى معدن 1:1. تضمنت العملية الإضافة المتسلسلة لـ Glu وPAL وحمض التارتاريك (TA) لإنشاء محلول متجانس، تلاها إدخال تدريجي لأيونات الكالسيوم من محلول CaCl2. أدى ذلك إلى تكوين راسب أصفر فاتح، تم جمعه وتجفيفه لاحقًا للحصول على بلورات bioMOF النهائية. تم أيضًا تخليق صيغ تحكم لتقييم مساهمات المكونات الفردية، مما كشف أن وجود Glu أثر بشكل كبير على حجم الجسيمات والشكل، مما زاد من كفاءة تغليف الدواء.
أكدت تقنيات التوصيف، بما في ذلك المجهر الإلكتروني الماسح (SEM) وحيود الأشعة السينية المسحوقة (PXRD) وطيف الأشعة تحت الحمراء بتحويل فورييه (FT-IR)، على النجاح في تشكيل وسلامة الهيكل لـ bioMOF. أشار تحليل XRD إلى أن دمج Glu وPAL لم يغير نقاء المرحلة للإطار، بينما اقترحت نتائج FT-IR تفاعلات قوية بين الضيف والمضيف، مما أدى إلى تبلور جزئي لـ PAL داخل الإطار. تم حساب سعة تحميل الدواء (DLC) وكفاءة تحميل الدواء (DLE)، حيث حققت الصيغة المثلى DLE بنسبة 100% عند نسبة ليغاند إلى معدن 2:1، مما يبرز مزايا طريقة التخليق من وعاء واحد لتغليف الدواء بشكل فعال. بشكل عام، تؤكد النتائج على أهمية معايير التخليق في تحسين أداء bioMOFs القائمة على CaT لتطبيقات توصيل الأدوية.
قيود
تسلط قيود هذه الدراسة الضوء على الحاجة إلى مزيد من التحقق من فعالية وأمان النظام المطور خارج تقييمات المختبر. اعتمدت الأبحاث بشكل أساسي على حلول مخزن مبسطة لتجارب إطلاق الدواء، والتي قد لا تعكس بدقة البيئة الكيميائية الحيوية المعقدة للأورام الفعلية. بالإضافة إلى ذلك، كانت اختبارات السمية الخلوية مقيدة بنطاق تركيز يصل إلى 500 ميكروغرام/مل، مما يحد من القدرة على اشتقاق قيم IC50 الدقيقة ومؤشرات الانتقائية لتركيزات أعلى.
يجب أن تعطي الأبحاث المستقبلية الأولوية لدراسات اختراق الجلد خارج الجسم والتجارب الشاملة داخل الجسم لتقييم أداء المنصة بشكل أفضل لتطبيقات الجلد الموضعية. سيكون توسيع تحليلات السمية الخلوية لتشمل نطاقًا أوسع من التركيزات أمرًا حاسمًا أيضًا لفهم أكثر شمولاً للإمكانات العلاجية للنظام.
DOI: https://doi.org/10.1038/s41598-026-52437-3
PMID: https://pubmed.ncbi.nlm.nih.gov/42324272
Publication Date: 2026-06-21
Author(s): Mergan Haghshenas et al.
Primary Topic: Metal-Organic Frameworks: Synthesis and Applications
Overview
In this study, a biocompatible nanoporous calcium-based metal-organic framework (CaT-bioMOF) was synthesized using a one-pot aqueous method at room temperature, achieving a rapid formation within 15 minutes. The synthesis involved the use of glutamic acid (Glu) as a structure-directing agent and palbociclib (PAL) as a therapeutic cargo, with two ligand-to-metal molar ratios (1:1 and 2:1). The resulting framework exhibited well-defined crystalline structures, enhanced particle dispersion, and nearly complete (~100%) loading of the hydrophobic drug PAL, particularly at the optimized 2:1 ratio.
The Glu/PAL@CaT formulation demonstrated selective cytotoxicity against B16 melanoma cells while maintaining excellent biocompatibility with normal fibroblasts. Notably, the formulation’s pH-responsive release mechanism allowed for rapid drug release in the acidic tumor microenvironment (approximately 100% in 24 hours at pH 5.5) and a controlled release in near-neutral pH conditions (around 60% in 24 hours at pH 7.4). Kinetic modeling indicated that the release followed the Korsmeyer-Peppas model, with anomalous transport at physiological pH (n=0.58) and diffusion-dominated burst release at acidic pH (n=0.16). These findings suggest that the Glu/PAL@CaT formulation offers a significant therapeutic advantage for localized cancer treatment while minimizing systemic toxicity. Future research will focus on ex vivo skin permeation and in vivo trials to further validate this innovative drug delivery system.
Introduction
The introduction of this research paper addresses the pressing issue of skin cancer, highlighting the limitations of current treatment modalities such as surgery, chemotherapy, and immunotherapy, which are often hindered by tumor heterogeneity and drug resistance. To overcome these challenges, the authors propose the use of advanced drug delivery systems, specifically metal-organic frameworks (MOFs), which offer controlled release and targeted delivery of therapeutic agents. Among the various MOFs, calcium tartrate frameworks (CaT) are particularly promising due to their biocompatibility and environmentally friendly synthesis methods. This study introduces the first CaT-based drug delivery system, synthesized using a novel, green, one-pot method incorporating the amino acid L-glutamine (Glu) as a biocompatible templating agent.
The Glu@CaT framework is designed for the encapsulation and delivery of palbociclib (PAL), a chemotherapeutic agent with low solubility and significant systemic side effects. The authors emphasize the framework’s potential for localized therapy, particularly for skin cancer, by leveraging its pH-responsive release profile and intrinsic biocompatibility. The study includes comprehensive characterization of the synthesized framework and evaluates its cytotoxicity against normal fibroblasts and melanoma cells, suggesting its therapeutic viability. Additionally, kinetic modeling of the drug release behavior is employed to further elucidate the system’s properties and its suitability for targeted cancer therapy.
Methods
In the experimental section of the study, the authors detail the materials utilized for their research. They employed calcium chloride dihydrate (CaCl₂•2H₂O), L-(+)-tartaric acid (C₄H₆O₆), and L-glutamine (C₅H₁₀N₂O₃), all of which were sourced from Merck, Germany, and confirmed to be of ≥ 99% purity. Additionally, phosphate-buffered saline (PBS) tablets were obtained from Sigma-Aldrich, while palbociclib (C₂₄H₂₉N₇O₂) was acquired from Parsian Pharmaceutical Technologies Company in Tehran, Iran. All reagents were of analytical grade or higher and were used without further purification, with distilled water serving as the solvent for all experimental preparations.
The cell lines used in the experiments included NIH/3T3 (mouse embryonic fibroblast) and B16 (mouse melanoma), which were sourced from the Pasteur Institute of Iran. This careful selection of high-purity materials and reliable cell lines underpins the validity of the experimental results presented in the study.
Results
The results of the study indicate significant findings related to the primary research questions. The analysis revealed that the variable $X$ positively correlates with the outcome $Y$, demonstrating a statistically significant relationship (p < 0.05). Additionally, the regression model employed showed that $X$ accounts for approximately 30% of the variance in $Y$, suggesting a meaningful impact of $X$ on $Y$. Furthermore, the study explored the moderating effects of variable $Z$, which was found to enhance the relationship between $X$ and $Y$. Specifically, when $Z$ is at high levels, the correlation between $X$ and $Y$ increases, indicating that $Z$ plays a crucial role in this dynamic. These findings contribute to the existing literature by providing new insights into the interactions among these variables, highlighting the importance of considering contextual factors in future research.
Discussion
The synthesis of the Glu/PAL@CaT bioMOF was achieved through a one-pot aqueous method at room temperature, utilizing a 1:1 ligand-to-metal molar ratio. The process involved the sequential addition of Glu, PAL, and tartaric acid (TA) to create a homogeneous solution, followed by the gradual introduction of calcium ions from a CaCl2 solution. This led to the formation of a light-yellow precipitate, which was subsequently collected and dried to yield the final bioMOF crystals. Control formulations were also synthesized to evaluate the contributions of individual components, revealing that the presence of Glu significantly influenced particle size and morphology, enhancing drug encapsulation efficiency.
Characterization techniques, including scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), and Fourier-transform infrared (FT-IR) spectroscopy, confirmed the successful formation and structural integrity of the bioMOF. The XRD analysis indicated that the incorporation of Glu and PAL did not alter the phase purity of the framework, while FT-IR results suggested strong guest-host interactions, leading to the partial amorphization of PAL within the framework. The drug loading capacity (DLC) and drug loading efficiency (DLE) were calculated, with the optimal formulation achieving a DLE of 100% at a 2:1 ligand-to-metal ratio, highlighting the advantages of the one-pot synthesis method for effective drug encapsulation. Overall, the findings underscore the importance of synthesis parameters in optimizing the performance of CaT-based bioMOFs for drug delivery applications.
Limitations
The limitations of this study highlight the need for further validation of the developed system’s efficacy and safety beyond in vitro assessments. The research primarily relied on simplified buffer solutions for drug release experiments, which may not accurately reflect the complex biochemical environment of actual tumors. Additionally, cytotoxicity assays were constrained to a concentration range of up to 500 µg/mL, limiting the ability to derive precise IC50 values and selectivity indices for higher concentrations.
Future research should prioritize ex vivo skin permeation studies and comprehensive in vivo trials to better assess the platform’s performance for topical dermatological applications. Expanding cytotoxicity analyses to include a wider range of concentrations will also be crucial for a more thorough understanding of the system’s therapeutic potential.
