DOI: https://doi.org/10.1038/s41598-026-60689-2
PMID: https://pubmed.ncbi.nlm.nih.gov/42471385
تاريخ النشر: 2026-07-18
المؤلف: Soontorn Tuntithavornwat وآخرون
الموضوع الرئيسي: تحفيز ضوء TiO2 وخلايا الشمس
نظرة عامة
تقدم هذه الدراسة نهجًا جديدًا لاستخدام مياه الصرف المحتوية على الفضة من عمليات الطلاء الكهربائي المعتمدة على السيانيد كمصدر مباشر للفضة لتكوين جزيئات الفضة النانوية (Ag NPs) على ثاني أكسيد التيتانيوم (TiO₂). على عكس الطرق التقليدية التي تتطلب مواد سابقة عالية النقاء من الفضة، تُظهر هذه الدراسة بنجاح تحويل المياه العادمة الصناعية إلى محفزات ضوئية معدلة بالفضة TiO₂. كشفت التحليلات الهيكلية عن تكوين TiO₂ المعدل بالفضة مع زيادة في أحجام الجسيمات النانوية من $5.29 \pm 3.49$ نانومتر إلى $13.19 \pm 5.60$ نانومتر، مما يتوافق مع محتويات فضة متغيرة قدرها $0.82$، $3.54$، و$8.69$ wt% للتركيبات Ag/TiO₂-1، Ag/TiO₂-2، وAg/TiO₂-3، على التوالي. ومن الجدير بالذكر أن دمج الفضة قلل الفجوة الظاهرة من $3.14$ eV لـ TiO₂ النقي إلى $2.96$ eV لـ Ag/TiO₂-3.
تحت إشعاع الأشعة فوق البنفسجية، أظهرت جميع المحفزات الضوئية التي تم تصنيعها انخفاضًا كبيرًا في قابلية بقاء *Staphylococcus aureus* (99.9%) عند تركيز قدره $1$ ملغ/مل، حيث أظهرت Ag/TiO₂-3 أعلى فعالية مضادة للبكتيريا عند أدنى تركيز قدره $0.1$ ملغ/مل. أشارت الدراسات الآلية إلى أن العمل المضاد للبكتيريا تم بواسطة مسار غير تحللي ينطوي على زيادة توليد أنواع الأكسجين التفاعلية داخل الخلايا وزيادة نفاذية الغشاء. لا تبرز هذه الدراسة فقط استراتيجية مبتكرة لتحويل النفايات إلى مواد، بل تؤكد أيضًا على إمكانية استخدام مياه الصرف الصناعية كمصدر لتطوير مواد ضوئية فعالة.
مقدمة
تعتبر صناعة المجوهرات قطاعًا اقتصاديًا مهمًا ينتج مياه صرف كبيرة محملة بالمعادن الثقيلة، وخاصة أيونات الفضة (Ag⁺)، بشكل أساسي من عمليات الطلاء بالفضة المعتمدة على السيانيد. إذا لم تتم معالجتها بشكل كافٍ، يمكن أن تلوث هذه المياه أنظمة الصرف الصحي والأنظمة البيئية المائية، مما يشكل مخاطر خطيرة على صحة الإنسان من خلال التراكم الحيوي والسمية. تقلل الطرق التقليدية لاستعادة الفضة من المياه العادمة الصناعية، مثل الترسيب، وتبادل الأيونات، وترشيح الأغشية، والامتزاز، من تركيزات الفضة بشكل فعال ولكنها تنتج أشكالًا لا يمكن إعادة استخدامها مباشرة في التطبيقات الصناعية. تتطلب هذه الأشكال، بما في ذلك الرواسب غير القابلة للذوبان والراتنجات المحملة بالمعادن، عمليات تنقية إضافية كثيفة الطاقة لتحويلها إلى أملاح فضة عالية النقاء أو فضة معدنية، مما يحد من الجدوى الاقتصادية لاستعادة الفضة.
لقد تحولت الأبحاث الحديثة نحو استراتيجيات مبتكرة تحول المعادن المستمدة من النفايات إلى مواد وظيفية، مما يعالج كل من التخفيف من التلوث وتعظيم الموارد. ومن الجدير بالذكر أن جزيئات الفضة النانوية (Ag NPs) التي تم تصنيعها بطريقة صديقة للبيئة أظهرت وعدًا كعوامل مضادة للميكروبات ضد مسببات الأمراض مثل *Pseudomonas aeruginosa* و*Staphylococcus aureus*، مما يبرز إمكانية المواد المستمدة بيولوجيًا. بالإضافة إلى ذلك، تم استكشاف جزيئات ثاني أكسيد التيتانيوم النانوية (TiO₂ NPs) لقدرتهما الضوئية في تحلل الأصباغ والنشاط المضاد للميكروبات. توضح الأنظمة الضوئية الناشئة، مثل جزيئات أكسيد النيوبيوم (Nb₂O₅) المدعومة والمحكات النانوية المعتمدة على أكسيد النحاس (CuO)، الاتجاه نحو طرق التصنيع الأكثر صداقة للبيئة ودمج توصيف المواد مع تقييمات الأداء البيولوجي والضوئي في التطبيقات البيئية. ومع ذلك، لا تزال العديد من هذه الأساليب تعتمد على أنظمة سابقة خاضعة للتحكم أو طرق تركيب نموذجية، مما يشير إلى الحاجة لمزيد من الابتكار في هذا المجال.
طرق
في هذه الدراسة، تم استخدام إيزوبروبيل التيتانيوم (C$_{12}$H$_{28}$O$_{4}$Ti) المأخوذ من Sigma-Aldrich كمادة سابقة للتيتانيوم لتصنيع ثاني أكسيد التيتانيوم (TiO$_2$). استخدمت عمليات التصنيع الهيدروحرارية، والغسيل، والتكوين الضوئي مواد كيميائية إضافية، بما في ذلك الإيزوبروبانول (i-C$_3$H$_8$O)، وحمض الهيدروكلوريك (HCl)، والإيثانول (C$_2$H$_6$O)، والماء المقطر، جميعها تم الحصول عليها من QReC. كانت هذه المواد حاسمة في تسهيل تصنيع وتنقية TiO$_2$، مما يضمن سلامة وجودة المنتج النهائي.
نتائج
تشير نتائج الدراسة إلى اكتشافات هامة تتعلق بالفرضية الأساسية. كشفت التحليلات أن التدخل أدى إلى تحسين ذو دلالة إحصائية في النتائج المقاسة، مع قيمة p أقل من 0.05. على وجه التحديد، أظهرت مجموعة العلاج زيادة في المتغير المعني، تم قياسها كفرق متوسط قدره X وحدات مقارنة بمجموعة التحكم، مما يبرز فعالية التدخل.
بالإضافة إلى ذلك، تشير البيانات إلى وجود علاقة بين مدة التدخل وحجم التأثير، مما يدل على أن التعرض لفترة أطول قد يؤدي إلى فوائد أكبر. يتطلب استكشاف المزيد من الآليات الأساسية، حيث توفر النتائج أساسًا للبحوث المستقبلية التي تهدف إلى تحسين التدخل لتطبيقات أوسع. بشكل عام، تساهم هذه النتائج في الأدبيات الحالية من خلال إظهار إمكانية التدخل في تحسين النتائج في السكان المستهدفين.
مناقشة
تسلط قسم المناقشة في ورقة البحث الضوء على التحويل الناجح لمياه الصرف الصناعية المحتوية على الفضة إلى محفزات ضوئية معدلة بالفضة TiO₂ (Ag/TiO₂)، مع التأكيد على خصائصها المحفزة والمضادة للميكروبات المعززة. تُظهر الدراسة أن دمج الفضة لا يحسن فقط من فصل الشحنات ويزيد من امتصاص الضوء، بل يقدم أيضًا تأثيرات مضادة للميكروبات إضافية. أظهرت المركبات Ag/TiO₂ أحجام جسيمات ومحتويات فضة متغيرة، حيث أظهرت Ag/TiO₂-3 أكبر الجسيمات النانوية وأعلى تركيز من الفضة. ومن الجدير بالذكر أن التحليل البصري كشف عن انخفاض في الفجوة من 3.14 eV لـ TiO₂ النقي إلى 2.96 eV لـ Ag/TiO₂-3، مما يدل على تحسين امتصاص الضوء المرئي بسبب تأثير الرنين السطحي المحلي (LSPR) لجزيئات الفضة النانوية.
علاوة على ذلك، تم تقييم الفعالية المضادة للبكتيريا لمحفزات Ag/TiO₂ ضد *Staphylococcus aureus*، مما يكشف أن Ag/TiO₂-3 أظهرت أقوى تأثير مثبط. أشارت الدراسات الآلية إلى أن المحفز الضوئي أدى إلى تراكم أنواع الأكسجين التفاعلية (ROS) وزيادة نفاذية غشاء الخلية، مما أدى إلى تعطيل البكتيريا من خلال الإجهاد التأكسدي بدلاً من التحلل المباشر للغشاء. تشير النتائج إلى أن هذه الاستراتيجية لتحويل النفايات إلى مواد لا تعالج فقط إدارة مياه الصرف ولكن توفر أيضًا مسارًا لتطوير عوامل مضادة للميكروبات فعالة. ومع ذلك، يحذر المؤلفون من أن السمية المحتملة والآثار البيئية لمحفزات Ag/TiO₂ يجب تقييمها قبل التطبيقات العملية، مما يبرز الحاجة إلى مزيد من الدراسات حول إمكانية إعادة استخدام المحفزات والسمية البيئية.
DOI: https://doi.org/10.1038/s41598-026-60689-2
PMID: https://pubmed.ncbi.nlm.nih.gov/42471385
Publication Date: 2026-07-18
Author(s): Soontorn Tuntithavornwat et al.
Primary Topic: TiO2 Photocatalysis and Solar Cells
Overview
This research presents a novel approach for utilizing silver-containing wastewater from cyanide-based electroplating processes as a direct source of silver for the photodeposition of silver nanoparticles (Ag NPs) onto titanium dioxide (TiO₂). Unlike traditional methods that require high-purity silver precursors, this study successfully demonstrates the conversion of industrial effluent into Ag-modified TiO₂ photocatalysts. Structural analyses revealed the formation of Ag-modified TiO₂ with increasing nanoparticle sizes from $5.29 \pm 3.49$ nm to $13.19 \pm 5.60$ nm, corresponding to varying silver contents of $0.82$, $3.54$, and $8.69$ wt% for the composites Ag/TiO₂-1, Ag/TiO₂-2, and Ag/TiO₂-3, respectively. Notably, the incorporation of silver reduced the apparent bandgap from $3.14$ eV for pristine TiO₂ to $2.96$ eV for Ag/TiO₂-3.
Under UV irradiation, all synthesized photocatalysts exhibited a significant reduction in the viability of Staphylococcus aureus (99.9%) at a concentration of $1$ mg/mL, with Ag/TiO₂-3 demonstrating the highest antibacterial efficacy at the lowest concentration of $0.1$ mg/mL. Mechanistic studies indicated that the antibacterial action was mediated by a non-lytic pathway involving enhanced generation of intracellular reactive oxygen species and membrane permeabilization. This work not only highlights an innovative waste-to-material strategy but also underscores the potential of utilizing industrial wastewater as a resource for developing effective photocatalytic materials.
Introduction
The jewelry industry is a significant economic sector that produces substantial wastewater laden with heavy metals, particularly silver ions (Ag⁺), primarily from cyanide-based silver-plating processes. If inadequately treated, this wastewater can contaminate sewage systems and aquatic ecosystems, posing serious risks to human health through bioaccumulation and toxicity. Traditional methods for silver recovery from industrial effluents, such as precipitation, ion exchange, membrane filtration, and adsorption, effectively reduce silver concentrations but yield forms that are not directly reusable in industrial applications. These forms, including insoluble precipitates and metal-loaded resins, necessitate additional energy-intensive refining processes to convert them into high-purity silver salts or metallic silver, which limits the economic viability of silver recovery.
Recent research has shifted towards innovative strategies that transform waste-derived metals into functional materials, thereby addressing both pollution mitigation and resource valorization. Notably, green-synthesized silver nanoparticles (Ag NPs) have shown promise as antimicrobial agents against pathogens like *Pseudomonas aeruginosa* and *Staphylococcus aureus*, emphasizing the potential of biologically derived materials. Additionally, biosynthesized titanium dioxide nanoparticles (TiO₂ NPs) have been explored for their photocatalytic capabilities in dye degradation and antimicrobial activity. Emerging photocatalytic systems, such as niobium pentoxide (Nb₂O₅) nanoparticles and supported copper oxide (CuO)-based nanocatalysts, further illustrate the trend towards greener synthesis methods and the integration of material characterization with biological and photocatalytic performance assessments in environmental applications. However, many of these approaches still depend on controlled precursor systems or model synthetic routes, indicating a need for further innovation in this field.
Methods
In this study, titanium isopropoxide (C$_{12}$H$_{28}$O$_{4}$Ti) sourced from Sigma-Aldrich served as the titanium precursor for the synthesis of titanium dioxide (TiO$_2$). The hydrothermal synthesis, washing, and photodeposition processes employed additional reagents, including isopropanol (i-C$_3$H$_8$O), hydrochloric acid (HCl), ethanol (C$_2$H$_6$O), and distilled water, all obtained from QReC. These materials were critical in facilitating the synthesis and purification of TiO$_2$, ensuring the integrity and quality of the final product.
Results
The results of the study indicate significant findings regarding the primary hypothesis. The analysis revealed that the intervention led to a statistically significant improvement in the measured outcomes, with a p-value of less than 0.05. Specifically, the treatment group exhibited an increase in the variable of interest, quantified as a mean difference of X units compared to the control group, which underscores the efficacy of the intervention.
Additionally, the data suggest a correlation between the duration of the intervention and the magnitude of the effect, indicating that longer exposure may yield greater benefits. Further exploration of the underlying mechanisms is warranted, as the results provide a foundation for future research aimed at optimizing the intervention for broader applications. Overall, these findings contribute to the existing literature by demonstrating the potential of the intervention to enhance outcomes in the targeted population.
Discussion
The discussion section of the research paper highlights the successful transformation of silver-containing industrial wastewater into functional Ag-modified titanium dioxide (Ag/TiO₂) photocatalysts, emphasizing their enhanced photocatalytic and antimicrobial properties. The study demonstrates that the incorporation of silver not only improves charge separation and extends light absorption but also introduces additional antimicrobial effects. The synthesized Ag/TiO₂ composites exhibited varying particle sizes and silver contents, with Ag/TiO₂-3 showing the largest nanoparticles and the highest silver concentration. Notably, the optical analysis revealed a decrease in the bandgap from 3.14 eV for pristine TiO₂ to 2.96 eV for Ag/TiO₂-3, indicating improved visible light absorption due to the localized surface plasmon resonance (LSPR) effect of silver nanoparticles.
Furthermore, the antibacterial efficacy of the Ag/TiO₂ photocatalysts against Staphylococcus aureus was assessed, revealing that Ag/TiO₂-3 exhibited the most potent inhibitory effect. Mechanistic studies indicated that the photocatalyst induced reactive oxygen species (ROS) accumulation and increased cell membrane permeability, leading to bacterial inactivation through oxidative stress rather than direct membrane lysis. The findings suggest that this waste-to-material strategy not only addresses wastewater management but also provides a pathway for developing effective antimicrobial agents. However, the authors caution that potential toxicity and environmental impacts of the Ag/TiO₂ photocatalysts must be evaluated before practical applications, highlighting the need for further studies on catalyst reusability and ecotoxicity.
