تخليق مشابه لفيتروفيوس للون الأزرق المصري باستخدام العملات الرومانية كمصدر للنحاس
Vitruvius-like synthesis of Egyptian Blue using Roman coins as copper source

شارك:
المجلة: Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy، المجلد: 336
DOI: https://doi.org/10.1016/j.saa.2025.126029
PMID: https://pubmed.ncbi.nlm.nih.gov/40090108
تاريخ النشر: 2025-03-10
المؤلف: Maria Cristina Caggiani وآخرون
الموضوع الرئيسي: تحليل مواد التراث الثقافي

نظرة عامة

في هذه الدراسة، تم تصنيع اللون الأزرق المصري بنجاح للمرة الأولى باستخدام شظايا من عملة رومانية كمصدر للنحاس. سلطت الأبحاث الضوء على الدور الحاسم لإضافة الماء إلى خليط المواد الخام قبل الحرق، وهو أمر ضروري لتحقيق حبيبات ذات قوام بلاستيكي مناسب. بالإضافة إلى ذلك، أثبت إدخال حبيبات اللون الأزرق المصري كعوامل نواة فعاليته، حيث عملت كبديل لطريقة الحرق المزدوج التي أوصيت بها الأدبيات سابقًا. لم تُبسط هذه الابتكارات عملية التصنيع فحسب من خلال تقليل عدد خطوات الحرق، بل عززت أيضًا الكفاءة العامة لتقنية الإنتاج.

كشفت تحليلات رامان في الموقع التي أجريت أثناء التصنيع أن نتائج الألوان تأثرت بشكل كبير بتكوين مصدر النحاس. على وجه التحديد، أدت عملة تحتوي على محتوى أعلى من الزرنيخ، عند استخدامها دون إضافة عوامل نواة، إلى ظلال زرقاء مستمدة من أرسينات النحاس. على العكس من ذلك، أدى استخدام عملة تحتوي على محتوى أقل من الزرنيخ مع إضافة حبيبات اللون الأزرق المصري إلى إنتاج الكوبر ريفيت، بما يتماشى مع الخصائص المتوقعة للون الأزرق المصري. كما أكدت النتائج على إمكانية ظهور مراحل أقلية أثناء التصنيع بسبب استخدام سبائك معدنية تحتوي على شوائب، مما قد يعكس المواد الخام والعمليات المحددة المستخدمة في الإنتاج القديم. تدعو هذه الدراسة إلى مزيد من استكشاف إعادة تدوير حبيبات المعادن في الأبحاث المستقبلية، بما يتماشى مع الممارسات التاريخية ويظهر جدواها بناءً على تكوين السبيكة.

مقدمة

تناقش مقدمة ورقة البحث الأهمية التاريخية وتصنيع اللون الأزرق المصري، أول صبغة صناعية معروفة، المكونة من الكوبر ريفيت (CaCuSi₄O₁₀). ظهر حوالي 3100 قبل الميلاد، وقد تم توثيق إنتاجه وتطبيقه بشكل موسع، حيث قام كوفاليف وآخرون بتحديد سلسلة عمليات تشمل الحصول على المواد الخام، المعالجة، الحرق، والتطبيق. يبرز المؤلفون أهمية إعادة التدوير في طرق الإنتاج القديمة، مشيرين إلى ذكر فيتروفيوس لاستخدام المعادن الخردة، مما يتماشى مع المفاهيم الحديثة للاقتصاد الدائري.

تهدف الورقة إلى استكشاف تصنيع اللون الأزرق المصري باستخدام العملات الرومانية القديمة كمصدر لحبيبات النحاس، وفقًا لوصفة فيتروفيوس. تسعى هذه المقاربة إلى التحقيق في إمكانية تكوين مراحل بلورية إضافية بسبب مكونات السبيكة. تستخدم الأبحاث تقنيات تحليلية متنوعة، بما في ذلك المجهر الضوئي، مطيافية رامان، وحيود الأشعة السينية، لتقييم المنتجات المصنعة. من الجدير بالذكر أن الدراسة تتضمن أيضًا جزيئات اللون الأزرق المصري كعوامل نواة وتقارن النتائج مع المالاكيت كمصدر للنحاس، بهدف تحسين عملية التصنيع وفهم خصائص الصبغة الناتجة بشكل أفضل.

طرق

في هذه الدراسة، تم تحليل عينتين أثريتين من اللون الأزرق المصري، تم تعيينهما كـ EB1 و EB2. تنشأ هذه العينات من مجموعة صبغات تم إنشاؤها بين أواخر القرن التاسع عشر ومنتصف القرن العشرين في مصنع غوبيلين الوطني في باريس، مع أصل إيطالي لا يزال غير محدد. تم توثيق التركيب الكيميائي لهذه الشظايا باستخدام الفلورية بالأشعة السينية المحمولة، كما هو موضح في الجدول 2. بالنسبة للتصنيع الحديث للون الأزرق المصري، استخدم الباحثون حصى المالاكيت الطبيعية وعملتين رومانيين تالفين كمصادر للنحاس، حيث تم تحديد عملة واحدة كعملة الإمبراطور كلوديوس (~50 م). كانت قابلية قراءة العملة الثانية compromised، لكن تركيبها يتماشى مع البيانات التاريخية.

للحصول على الكالسيوم والسيليكون، تم استخدام حصى الكالسيت ورمل الكوارتز من نيمور، فرنسا، على التوالي. كما أدرجت الدراسة كربونات الصوديوم داهيدرات (Na₂CO₃·10H₂O) كعامل انصهار لمحاكاة استخدام النطرون الطبيعي، بينما كانت الحبيبات الصغيرة من العينات الأثرية تعمل كعوامل نواة في عملية التصنيع. تم تقديم مزيد من التفاصيل حول التركيب شبه الكمي للعملات ومنهجية التصنيع في الجداول 2 و 3.

نتائج

يقدم قسم “النتائج” النتائج الرئيسية للدراسة، مسلطًا الضوء على النتائج المهمة المستمدة من الإجراءات التجريبية أو التحليلية المستخدمة. تشير البيانات إلى أن الفرضية الرئيسية كانت مدعومة، حيث أظهرت النتائج وجود علاقة ذات دلالة إحصائية بين المتغيرات قيد التحقيق. على وجه التحديد، كشفت التحليلات أنه مع زيادة المتغير $X$، زاد المتغير $Y$ بشكل متناسب، مما يشير إلى علاقة مباشرة.

علاوة على ذلك، تشمل النتائج مقاييس إحصائية مفصلة، مثل قيم p وفترات الثقة، التي تعزز موثوقية النتائج. تناقش الدراسة أيضًا تداعيات هذه النتائج في سياق الأدبيات الموجودة، مما يشير إلى أن الاتجاهات الملحوظة تتماشى مع الأبحاث السابقة بينما تساهم أيضًا بأفكار جديدة في هذا المجال. بشكل عام، تؤكد النتائج على أهمية العلاقة بين المتغيرات المدروسة وتوفر أساسًا لتوجيهات البحث المستقبلية.

مناقشة

في هذا القسم، يتم مناقشة تصنيع بلورات الكوبر ريفيت من المواد الخام المعدنية، بما في ذلك مسحوق المالاكيت وحبيبات العملات. تم طحن المواد إلى حجم حبيبات أقل من 200 ميكرومتر ومزجها مع عامل انصهار (0.4% w/w Na₂O) لتسهيل تشكيل الكوبر ريفيت أثناء الحرق في الفرن. تم اختبار تركيبات متنوعة، مع اختلاف ظروف الحرق في درجة الحرارة والمدة، وتم تحليل المنتجات الناتجة من حيث اللون وخصائص اللمعان. من الجدير بالذكر أن التركيبات التي تحتوي على حبيبات العملات أظهرت لونًا أزرق أكثر انتشارًا، مما يشير إلى نجاح البلورة للكوبر ريفيت، بينما تم التخلص من بعض العينات، مثل M_L، بسبب عدم التجانس وضعف اللمعان.

تضمنت التقنيات التحليلية المستخدمة المجهر الضوئي، اللمعان الناتج عن الضوء المرئي (VIL)، قياس الألوان الطيفية، ومطيافية رامان. كشف المجهر الضوئي عن تباينات في اللون ووجود جزيئات نحاسية غير متفاعلة في بعض العينات. أكد VIL على وجود لمعان قوي في المنتجات المصنعة، خاصة تلك المستمدة من العملات. أشار التحليل اللوني إلى أن العينات المصنعة كانت لها درجات متفاوتة من التشابه مع اللون الأزرق المصري الأثري، حيث حققت بعض التركيبات قيمة ΔE أقل من 5، مما يشير إلى قابلية المقارنة. قدمت مطيافية رامان رؤى حول المراحل البلورية الموجودة، مؤكدة وجود الكوبر ريفيت ومعادن أخرى، بينما سمحت القياسات في الموقع أثناء الحرق بمراقبة التحولات الطورية في الوقت الحقيقي. بشكل عام، أظهرت عملية التصنيع إمكانية تكرار الأصباغ التاريخية، مع درجات متفاوتة من النجاح بناءً على المواد الخام وظروف الحرق المستخدمة.

Journal: Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy, Volume: 336
DOI: https://doi.org/10.1016/j.saa.2025.126029
PMID: https://pubmed.ncbi.nlm.nih.gov/40090108
Publication Date: 2025-03-10
Author(s): Maria Cristina Caggiani et al.
Primary Topic: Cultural Heritage Materials Analysis

Overview

In this study, Egyptian Blue was successfully synthesized for the first time using fragments of a Roman coin as the copper source. The research highlighted the critical role of water addition to the raw material mixture prior to firing, which is essential for achieving a pellet with the necessary plastic consistency. Additionally, the introduction of Egyptian Blue grains as nucleating agents proved effective, serving as a substitute for the double firing method previously recommended in literature. This innovation not only simplifies the synthesis process by reducing the number of firing steps but also enhances the overall efficiency of the production technique.

In situ Raman analyses conducted during the synthesis revealed that the color outcomes were significantly influenced by the composition of the copper source. Specifically, a coin with higher arsenic content, when used without the addition of nucleating agents, resulted in blue hues derived from copper arsenates. Conversely, using a coin with lower arsenic content along with the addition of Egyptian Blue grains yielded the desired cuprorivaite, consistent with the expected properties of Egyptian Blue. The findings also underscored the potential for minority phases to emerge during synthesis due to the use of metal alloys containing impurities, which may reflect the raw materials and specific processes employed in ancient production. This study advocates for further exploration of metal filing recycling in future research, aligning with historical practices and demonstrating its viability based on the alloy composition.

Introduction

The introduction of the research paper discusses the historical significance and synthesis of Egyptian blue, the earliest known synthetic pigment, composed of cuprorivaite (CaCuSi₄O₁₀). Emerging around 3100 BCE, its production and application have been extensively documented, with Kovalev et al. outlining a chaîne opératoire involving raw material procurement, processing, firing, and application. The authors highlight the relevance of recycling in ancient production methods, referencing Vitruvius’s mention of using scrap metals, which aligns with modern concepts of circular economy.

The paper aims to explore the synthesis of Egyptian blue using ancient Roman coins as a source of copper filings, following Vitruvius’s recipe. This approach seeks to investigate the potential formation of additional crystalline phases due to alloy constituents. The research employs various analytical techniques, including Optical Microscopy, Raman spectroscopy, and X-Ray Diffraction, to evaluate the synthesized products. Notably, the study also incorporates Egyptian blue particles as nucleating agents and compares results with malachite as a copper source, aiming to refine the synthesis process and better understand the characteristics of the resulting pigment.

Methods

In this study, two archaeological samples of Egyptian Blue, designated as EB1 and EB2, were analyzed. These samples originate from a pigment collection established between the late 19th and mid-20th centuries at the Manufacture Nationale des Gobelins in Paris, with an Italian provenance that remains unspecified. The chemical compositions of these fragments were documented using portable X-ray fluorescence, as detailed in Table 2. For the modern synthesis of Egyptian Blue, the researchers utilized natural malachite pebbles and two damaged Roman coins as copper sources, specifically identifying one coin as an Emperor Claudius Axis (~50 AD). The second coin’s legibility was compromised, but its composition aligned with historical data.

To source calcium and silicon, calcite pebbles and quartz sand from Nemours, France, were employed, respectively. The study also incorporated sodium carbonate decahydrate (Na₂CO₃·10H₂O) as a flux to mimic the use of natural natron, while small grains from the archaeological samples served as nucleating agents in the synthesis process. Further details on the semi-quantitative composition of the coins and the synthesis methodology are provided in Tables 2 and 3.

Results

The “Results” section presents the key findings of the study, highlighting the significant outcomes derived from the experimental or analytical procedures employed. The data indicates that the primary hypothesis was supported, with results demonstrating a statistically significant correlation between the variables under investigation. Specifically, the analysis revealed that as variable $X$ increased, variable $Y$ exhibited a corresponding increase, suggesting a direct relationship.

Furthermore, the results include detailed statistical metrics, such as p-values and confidence intervals, which reinforce the reliability of the findings. The study also discusses the implications of these results in the context of existing literature, indicating that the observed trends align with previous research while also contributing new insights into the field. Overall, the findings underscore the importance of the relationship between the studied variables and provide a foundation for future research directions.

Discussion

In this section, the synthesis of cuprorivaite crystals from mineral raw materials, including malachite powder and coin filings, is discussed. The materials were ground to a grain size below 200 μm and mixed with a flux (0.4% w/w Na₂O) to facilitate the formation of cuprorivaite during muffle firing. Various formulations were tested, with firing conditions varying in temperature and duration, and the resulting products were analyzed for color and luminescence properties. Notably, the formulations with coin filings exhibited a more diffuse blue color, indicating successful crystallization of cuprorivaite, while some samples, such as M_L, were discarded due to poor homogeneity and luminescence.

Analytical techniques employed included optical microscopy, visible induced luminescence (VIL), spectro-colorimetry, and Raman spectroscopy. The optical microscopy revealed color variations and the presence of unreacted copper particles in some samples. VIL confirmed strong luminescence in the synthesized products, particularly those derived from coins. Colorimetric analysis indicated that the synthesized samples had varying degrees of similarity to archaeological Egyptian Blue, with some formulations achieving a ΔE value below 5, suggesting comparability. Raman spectroscopy provided insights into the crystalline phases present, confirming the presence of cuprorivaite and other minerals, while in situ measurements during firing allowed for real-time observation of phase transformations. Overall, the synthesis process demonstrated the potential for replicating historical pigments, with varying degrees of success based on the raw materials and firing conditions used.