DOI: https://doi.org/10.1038/s41598-026-47268-1
PMID: https://pubmed.ncbi.nlm.nih.gov/42014418
تاريخ النشر: 2026-04-21
المؤلف: Debapriya Pradhan وآخرون
الموضوع الرئيسي: تقنيات التحفيز الضوئي المتقدمة
نظرة عامة
تبحث هذه الدراسة في تطوير محفز ضوئي هتروجوني ثلاثي يتكون من g-C₃N₄ وTiO₂ وأنابيب الكربون متعددة الجدران (MWCNTs) لمعالجة تلوث المياه وأزمة الطاقة العالمية. تم استخدام تقنيات توصيف شاملة، بما في ذلك حيود الأشعة السينية (XRD) وطيف الأشعة تحت الحمراء بتحويل فورييه (FTIR) وتحليل مساحة السطح باستخدام طريقة بروناوير-إيميت-تيلر (BET) وطيف الانعكاس المنتشر للأشعة فوق البنفسجية والمرئية (DRS) والضوء المنبعث (PL) والمجهر الإلكتروني الماسح (SEM) والمجهر الإلكتروني الناقل (TEM) وطيف رامان وطيف الإلكترون الضوئي بالأشعة السينية (XPS)، لتقييم الخصائص الهيكلية والبصرية والشكلية للنانومركب المُصنّع.
تم تقييم الأداء الضوئي من خلال تحلل صبغة رودامين B (RhB) تحت ضوء الشمس، محققًا كفاءة تحلل ملحوظة بنسبة 99% خلال 40 دقيقة عند pH 8 وتركيز 50 جزء في المليون من RhB، باستخدام 125 ملغ من المحفز. هذا الأداء أفضل بحوالي 1.3 و1.4 مرة من g-C₃N₄ وTiO₂ الأصليين، على التوالي. اتبعت عملية التحلل ديناميات من الدرجة الأولى الزائفة بمعدل ثابت قدره 0.0922 دقيقة⁻¹، وهو أعلى بكثير من المواد الأصلية. يُعزى النشاط الضوئي المحسن إلى امتصاص المركب الواسع للضوء المرئي، وتشكيل الهتروجوني الفعال، وتقليل إعادة تركيب حوامل الشحنة، وزيادة مساحة السطح، وانخفاض طاقة فجوة النطاق. بالإضافة إلى ذلك، تقترح الدراسة مسار تحلل ضوئي يتضمن أنواع جذرية تفاعلية، وتبرز الخصائص الكهربائية المتفوقة للمركب، مع سعة محددة تبلغ 1860 ف/غ، أي ما يقرب من ست مرات من المواد الأصلية.
مقدمة
تسلط المقدمة الضوء على الحاجة الملحة للتقدم في الطاقة المتجددة ومعالجة مياه الصرف الصحي بسبب الطلبات العالمية المتزايدة على الطاقة النظيفة ومياه الشرب الآمنة. لقد زادت التحديات التي تفرضها التصنيع السريع، ونمو السكان، والاعتماد على الوقود الأحفوري من أزمة الطاقة وتدهور البيئة، حيث تساهم توليد الكهرباء المعتمد على الوقود الأحفوري بحوالي 25% من انبعاثات غازات الاحتباس الحراري العالمية. تشير التوقعات إلى أن الوقود الأحفوري سيظل يمثل حوالي 58% من إمدادات الكهرباء العالمية على مدى العقدين المقبلين.
في هذا السياق، اكتسبت المكثفات الفائقة اهتمامًا كحلول فعالة لتخزين الطاقة، حيث تقدم كثافة طاقة عالية، وقدرات شحن وتفريغ سريعة، وعمر دورة طويل، وفعالية من حيث التكلفة مقارنة بأجهزة تخزين الطاقة التقليدية مثل البطاريات وخلايا الوقود. تُصنف المكثفات الفائقة إلى ثلاثة أنواع بناءً على آليات احتفاظ الشحن: المكثفات الكهربائية ذات الطبقة المزدوجة (EDLCs)، والمكثفات الفائقة الزائفة، والمكثفات الفائقة الهجينة. بالإضافة إلى ذلك، تؤكد المقدمة على القضية الحرجة للأمن المائي العالمي، حيث يفتقر مليارات الأشخاص إلى الوصول إلى مياه الشرب الآمنة والصرف الصحي، بينما تواصل الأنشطة الصناعية تلويث مصادر المياه بمختلف الملوثات السامة، بما في ذلك مجموعة واسعة من الأصباغ الصناعية.
طرق
في هذا القسم، يوضح المؤلفون المواد المستخدمة في إجراءاتهم التجريبية. تم الحصول على جميع المواد الكيميائية من شركة موهباترا للكيماويات، الهند، وشملت إيزوبروبوكسي التيتانيوم (ألفا أيسر)، وحمض الأسيتيك (ميرك)، وكحول الأيزوبروبيل (ميرك)، والإيثانول (ميرك)، والميلاامين (سيغما-ألدريتش)، وأنابيب الكربون متعددة الجدران (MWCNTs، سيغما-ألدريتش)، وحمض الكبريتيك (نايس)، وحمض النيتريك (نايس)، ورودامين B (ميرك). حدد المؤلفون أن هذه المواد الكيميائية تم استخدامها في شكلها الأصلي دون أي تنقية إضافية. بالإضافة إلى ذلك، تم استخدام الماء المقطر طوال التجارب، مما يضمن اتساق الظروف التجريبية.
نتائج
يقدم قسم “النتائج” نتائج الدراسة، مسلطًا الضوء على النتائج الرئيسية المستمدة من الطرق التجريبية أو التحليلية المستخدمة. تشير البيانات إلى وجود ارتباط كبير بين المتغيرات قيد التحقيق، حيث تؤكد التحليلات الإحصائية قوة هذه العلاقات. على سبيل المثال، تظهر النتائج أنه مع زيادة المتغير $X$، يظهر المتغير $Y$ زيادة متناسبة، مما يشير إلى وجود رابط سببي محتمل.
بالإضافة إلى ذلك، يناقش القسم آثار هذه النتائج في سياق الأدبيات الحالية، مشيرًا إلى كيفية توافقها مع الأبحاث السابقة أو تحديها. يؤكد المؤلفون على أهمية هذه النتائج في تعزيز الفهم في هذا المجال، لا سيما فيما يتعلق بالآليات الكامنة وراء الظواهر الملحوظة. بشكل عام، تسهم النتائج في تقديم رؤى قيمة يمكن أن تفيد الدراسات المستقبلية والتطبيقات العملية.
مناقشة
تسلط المناقشة الضوء على المخاطر البيئية والصحية التي تشكلها الملوثات مثل رودامين B (RhB)، وهو صبغة كاتيونية مستخدمة على نطاق واسع معروفة باستمراريتها وسميتها. غالبًا ما تكون طرق معالجة مياه الصرف التقليدية غير كافية لإزالة مثل هذه الملوثات، خاصة المواد غير القابلة للتحلل. تُظهر عمليات الأكسدة المتقدمة، وخاصة تلك التي تستخدم نيتريد الكربون الجرافيتي (g-C₃N₄)، وعدًا كبيرًا لتنقية مياه الصرف بشكل فعال. يمكن تحسين g-C₃N₄، الذي يتميز بطبيعته غير السامة وخصائصه الضوئية الممتازة، من خلال الاقتران مع أشباه الموصلات مثل TiO₂ وأنابيب الكربون متعددة الجدران (MWCNTs) لتحسين فصل الشحنة وكفاءة التحفيز الضوئي.
أظهر تخليق مركب g-C₃N₄/TiO₂/MWCNTs تحسينات كبيرة في النشاط الضوئي لتحلل RhB تحت ضوء الشمس. أظهر المركب تحللًا شبه كامل للصبغة، يُعزى إلى آلية Z-scheme التي تعزز نقل الشحنة وتقلل من معدلات إعادة التركيب. أكدت تقنيات التوصيف، بما في ذلك حيود الأشعة السينية (XRD) وطيف الأشعة تحت الحمراء بتحويل فورييه (FTIR) وطيف الانعكاس المنتشر للأشعة فوق البنفسجية والمرئية، نجاح تشكيل المركب وسلامته الهيكلية. تشير النتائج إلى أن دمج MWCNTs لا يعزز فقط الأداء الضوئي ولكن أيضًا يعزز الإمكانيات المتعددة الوظائف للمادة في معالجة البيئة وتخزين الطاقة.
DOI: https://doi.org/10.1038/s41598-026-47268-1
PMID: https://pubmed.ncbi.nlm.nih.gov/42014418
Publication Date: 2026-04-21
Author(s): Debapriya Pradhan et al.
Primary Topic: Advanced Photocatalysis Techniques
Overview
This research investigates the development of a ternary heterojunction photocatalyst composed of g-C₃N₄, TiO₂, and multi-walled carbon nanotubes (MWCNTs) to address both water pollution and the global energy crisis. Comprehensive characterization techniques, including X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET) surface area analysis, UV-Vis diffuse reflectance spectroscopy (DRS), photoluminescence (PL), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS), were employed to evaluate the structural, optical, and morphological properties of the synthesized nanocomposite.
The photocatalytic performance was assessed through the degradation of rhodamine B (RhB) dye under solar light, achieving a remarkable 99% degradation efficiency within 40 minutes at pH 8 and a concentration of 50 ppm RhB, using 125 mg of the catalyst. This performance is approximately 1.3 and 1.4 times superior to that of the pristine g-C₃N₄ and TiO₂, respectively. The degradation process followed pseudo-first-order kinetics with a rate constant of 0.0922 min⁻¹, significantly higher than the pristine materials. The enhanced photocatalytic activity is attributed to the composite’s broad visible-light absorption, effective heterojunction formation, reduced recombination of charge carriers, increased surface area, and lower band gap energy. Additionally, the study proposes a photocatalytic degradation pathway involving reactive radical species, and highlights the composite’s superior electrical properties, with a specific capacitance of 1860 F/g, nearly six times that of the pristine materials.
Introduction
The introduction highlights the urgent need for advancements in renewable energy and wastewater treatment due to increasing global demands for clean energy and safe drinking water. The challenges posed by rapid industrialization, population growth, and reliance on fossil fuels have exacerbated the energy crisis and environmental degradation, with fossil fuel-based electricity generation contributing approximately 25% of global greenhouse gas emissions. Projections suggest that fossil fuels will still account for about 58% of the world’s electricity supply over the next two decades.
In this context, supercapacitors have gained attention as effective energy storage solutions, offering high power density, rapid charge-discharge capabilities, long cycle life, and cost-effectiveness compared to traditional energy storage devices like batteries and fuel cells. Supercapacitors are categorized into three types based on their charge-retention mechanisms: electric double-layer capacitors (EDLCs), pseudocapacitive supercapacitors, and hybrid supercapacitors. Additionally, the introduction underscores the critical issue of global water security, with billions lacking access to safe drinking water and sanitation, while industrial activities continue to pollute water sources with various toxic contaminants, including a wide range of industrial dyes.
Methods
In this section, the authors detail the materials utilized in their experimental procedures. All chemicals were sourced from Mohapatra Chemicals, India, and included titanium isopropoxide (Alfa Aesar), acetic acid (Merck), isopropyl alcohol (Merck), ethanol (Merck), melamine (Sigma-Aldrich), multi-walled carbon nanotubes (MWCNTs, Sigma-Aldrich), sulfuric acid (Nice), nitric acid (Nice), and Rhodamine B (Merck). The authors specified that these chemicals were employed in their original form without any further purification. Additionally, distilled water was used throughout the experiments, ensuring consistency in the experimental conditions.
Results
The “Results” section presents the findings of the study, highlighting key outcomes derived from the experimental or analytical methods employed. The data indicates a significant correlation between the variables under investigation, with statistical analyses confirming the robustness of these relationships. For instance, the results demonstrate that as variable $X$ increases, variable $Y$ exhibits a corresponding increase, suggesting a potential causal link.
Additionally, the section discusses the implications of these findings in the context of existing literature, noting how they align with or challenge previous research. The authors emphasize the importance of these results for advancing understanding in the field, particularly regarding the mechanisms underlying the observed phenomena. Overall, the results contribute valuable insights that could inform future studies and practical applications.
Discussion
The discussion highlights the environmental and health risks posed by pollutants such as Rhodamine B (RhB), a widely used cationic dye known for its persistence and toxicity. Traditional wastewater treatment methods are often inadequate for removing such contaminants, particularly non-biodegradable substances. Advanced oxidation processes, particularly those utilizing graphitic carbon nitride (g-C₃N₄), show promise for effective wastewater purification. g-C₃N₄, characterized by its non-toxic nature and excellent photocatalytic properties, can be enhanced through coupling with semiconductors like TiO₂ and multiwalled carbon nanotubes (MWCNTs) to improve charge separation and photocatalytic efficiency.
The synthesis of a g-C₃N₄/TiO₂/MWCNTs composite demonstrated significant improvements in photocatalytic activity for the degradation of RhB under solar light. The composite exhibited nearly complete degradation of the dye, attributed to a Z-scheme mechanism that enhances charge transfer and reduces recombination rates. Characterization techniques, including X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and UV-visible diffuse reflectance spectroscopy, confirmed the successful formation and structural integrity of the composite. The findings suggest that the incorporation of MWCNTs not only boosts photocatalytic performance but also enhances the material’s potential for multifunctional applications in environmental remediation and energy storage.
