تصنيع غشاء نانو مركب ZGTPM لإزالة التتراسيكلين بشكل متآزر عبر الغربلة الانتقائية حسب الحجم والتحلل الضوئي Fabrication of a ZGTPM nanocomposite membrane for the synergistic removal of tetracycline via size selective sieving and photocatalytic degradation

شارك:
المجلة: Scientific Reports، المجلد: 16، العدد: 1
DOI: https://doi.org/10.1038/s41598-026-47068-7
PMID: https://pubmed.ncbi.nlm.nih.gov/41991575
تاريخ النشر: 2026-04-16
المؤلف: Ayman K. El‐Sawaf وآخرون
الموضوع الرئيسي: تقنيات فصل الأغشية

نظرة عامة

تقدم هذه الدراسة تطوير غشاء نانو مركب متعدد الوظائف ZGTPM، الذي يدمج ZIF-8، أكسيد الجرافين (GO)، Ti₃C₂ MXene، ونقاط كوانتوم TiO₂، بهدف الإزالة الفعالة للتتراسيكلين (TC) من المياه الملوثة. أكدت الخصائص على التكوين الناجح لنقاط كوانتوم TiO₂ (3-5 نانومتر)، مما عزز بشكل كبير خصائص الغشاء. زادت إضافة هذه المواد النانوية الهجينة من المساحة السطحية المحددة من 41.3 إلى 126.8 م²/غ، وحسنت من المحبة للماء، مما قلل من زاوية تماس الماء من 78.5° إلى 43.2°. وبالتالي، زادت تدفق المياه النقية بحوالي 80%، من 216 إلى 389 ل·م⁻²·س⁻¹ عند 1 بار، مع تحقيق كفاءة إزالة تتراسيكلين تزيد عن 99.5% مع سعة امتصاص تبلغ 82.4 ملغ/غ عند 298 كلفن، متوافقة مع معادلة لانغموير والديناميكا الحركية من الدرجة الثانية الزائفة.

أشارت التحليلات الميكانيكية إلى أن الامتصاص كان العملية الرئيسية للإزالة في الظلام، بينما ساهم التحلل الضوئي تحت الإشعاع الشمسي المحاكى بشكل كبير في الكفاءة العامة، محققًا 68% تحلل خلال 120 دقيقة. اقترحت التقييمات الديناميكية الحرارية أن عملية الامتصاص تلقائية، ماصة للحرارة، مدفوعة بالإنتروبيا، مما يدل على تفاعلات مواتية بين التتراسيكلين والغشاء. أظهر غشاء ZGTPM استقرارًا ممتازًا وقابلية لإعادة الاستخدام، حيث حافظ على كفاءة إزالة تزيد عن 97% بعد خمس دورات، مع الحد الأدنى من التدهور الهيكلي. تسلط هذه الدراسة الضوء على إمكانيات الغشاء كحل مستدام لمعالجة مياه الصرف الملوثة بالمضادات الحيوية، مع إمكانية تحسينات مستقبلية من خلال تقنيات تحسين متقدمة.

طرق

تضمنت الطرق التجريبية المستخدمة في هذه الدراسة تخليق ZIF-8 وإعداد أغشية النانو المركبة ZGTPM باستخدام مواد كيميائية من الدرجة التحليلية. تضمنت المواد الرئيسية نترات الزنك سداسية الماء والإيميدازول لتخليق ZIF-8، بالإضافة إلى مسحوق الجرافيت وحمض الكبريتيك المركز لإنتاج أكسيد الجرافين عبر طريقة هومر المعدلة. تم الحصول على نانو صفائح كربيد التيتانيوم MXene من خلال حفر مسحوق مرحلة MAX Ti₃AlC₂، بينما تم إعداد نقاط كوانتوم أكسيد التيتانيوم باستخدام تقنية تشتت الميكرو سول-جل. كانت بولي إيثير سلفون هي مصفوفة الغشاء، مع استخدام N-methyl-2-pyrrolidone و polyvinylpyrrolidone كمذيبات وعوامل تشكيل المسام، على التوالي.

تم إجراء خصائص أغشية ZGTPM باستخدام مجموعة من التقنيات المتطورة. تم استخدام حيود الأشعة السينية، المجهر الإلكتروني الماسح (SEM)، المجهر الإلكتروني الناقل (TEM)، مطياف الأشعة تحت الحمراء بتحويل فورييه (FTIR)، وتحليلات امتصاص/إزالة النيتروجين لتقييم الخصائص الهيكلية والشكلية والنسيجية. تم تقييم الاستقرار الحراري من خلال التحليل الحراري الوزني (TGA)، بينما تم تحليل التركيب الكيميائي السطحي عبر مطياف الأشعة السينية للإلكترونات (XPS). تم تحديد الخصائص الميكانيكية باستخدام آلة اختبار عالمية، وتم قياس مسامية الغشاء وخشونة السطح باستخدام المجهر الذري (AFM). تم اختبار الأداء الضوئي للغشاء من خلال تحلل التتراسيكلين (TC) في إعداد مفاعل محكم، مع تضمين عملية ثنائية الطور لتمييز بين الامتصاص والتحلل الضوئي، مع قياس الكفاءة باستخدام مطيافية الأشعة فوق البنفسجية-المرئية.

نتائج

توضح قسم النتائج تأثير الافتراضات المختلفة التي تم اتخاذها خلال الدراسة. يتم وصف كل افتراض بالتفصيل، مع تسليط الضوء على أهميته بالنسبة للنتائج العامة. تشير التحليلات إلى أن صحة هذه الافتراضات تؤثر بشكل كبير على النتائج، مما يقترح ضرورة إعطاء اعتبار دقيق لصياغتها.

علاوة على ذلك، تؤكد المناقشة على تداعيات هذه النتائج على الأبحاث المستقبلية والتطبيقات العملية. تقترح أن الانحرافات عن الافتراضات المذكورة قد تؤدي إلى استنتاجات مختلفة، مما يبرز ضرورة الشفافية في الخيارات المنهجية. بشكل عام، تعزز النتائج أهمية اختبار الافتراضات بدقة في تعزيز موثوقية نتائج الأبحاث.

مناقشة

تتناول قسم المناقشة من ورقة البحث تفاصيل تخليق وخصائص غشاء مركب متعدد الوظائف، يُشار إليه باسم ZGTPM، الذي يدمج ZIF-8، أكسيد الجرافين (GO)، Ti₃C₂ MXene، ونقاط كوانتوم TiO₂ (QDs). يتم وصف عمليات التحضير لكل مكون، بما في ذلك الطريقة الحلزونية لـ ZIF-8، عملية هومر المعدلة لـ GO، الحفر الانتقائي لـ Ti₃C₂ MXene، وطريقة سول-جل لـ TiO₂ QDs. يتم إنشاء مادة النانو الهجينة ZGT عن طريق تشتت هذه المكونات في الماء المنزوع الأيونات، تليها الموجات فوق الصوتية والتحريك الميكانيكي لضمان التجانس. يتم تصنيع غشاء ZGTPM باستخدام بولي إيثير سلفون (PES) كمصفوفة بوليمرية، مع بولي فينيل بيروليدون (PVP) كعامل تشكيل للمسام، مما ينتج غشاء يظهر خصائص امتصاص وتحلل ضوئي محسنة.

يتم تقييم أداء غشاء ZGTPM لإزالة التتراسيكلين (TC) من خلال عمليات الترشيح والامتصاص المحكومة. تكشف الاختبارات الأولية أن الغشاء يحقق كفاءة إزالة بنسبة 31.5% من خلال الامتصاص فقط، بينما يؤدي التحلل الضوئي اللاحق تحت التعرض للضوء إلى كفاءة إزالة إجمالية تتجاوز 99.5%. تسلط هذه العملية ذات المرحلتين الضوء على التأثير التآزري بين الامتصاص والتحلل الضوئي، حيث يعمل الغشاء كمركز لتجميع TC، مما يعزز فعالية المواقع الضوئية. كما تؤكد الدراسة على استقرار الغشاء وقابلية إعادة استخدامه، مما يظهر كفاءة إزالة عالية عبر خمس دورات متتالية، مع الحد الأدنى من فقدان الأداء. تؤكد الخصائص الهيكلية من خلال تقنيات مثل FTIR، XRD، SEM، وTGA على التكامل الناجح للمكونات واستقرار الغشاء الحراري، مما يدعم إمكانياته للتطبيقات العملية في معالجة مياه الصرف.

القيود

في قسم القيود، يناقش المؤلفون الافتراضات التي تم اتخاذها خلال نمذجة العناصر المحدودة (FEM) لغشاء ZGTPM النانو مركب، الذي تم تصميمه لتقييم نقل الكتلة، الامتصاص، والتحلل الضوئي للتتراسيكلين (TC). يعامل النموذج الغشاء كوسط متجانس ومتساوي، على الرغم من تركيبه المعقد، ويستخدم تدفق لامع مستقر تحكمه قانون دارسي. يتم نمذجة نقل TC من خلال آلية انتشار-امتصاص مرتبطة تعتمد على الديناميكا الحركية من الدرجة الثانية الزائفة، بينما يتم تبسيط عملية التحلل إلى تفاعل من الدرجة الأولى الزائفة تحت إشعاع ضوء موحد وتوليد مستمر لجذور الأكسجين التفاعلية (ROS) عند 298 كلفن. من الجدير بالذكر أن النموذج يتجاهل تأثيرات انسداد الغشاء وكتل المسام المحتملة، مما قد يؤدي إلى تقدير مفرط لأداء الغشاء على المدى الطويل.

يعترف المؤلفون بأن هذه التبسيطات، بينما توفر رؤى حول كفاءة الغشاء، تقدم قيودًا كبيرة. قد يتجاهل افتراض التجانس مقاومة النقل المحلية بسبب تكتل المواد النانوية، وقد يؤدي استبعاد تأثيرات الانسداد إلى تقييم مبالغ فيه للتدفق وقدرات الإزالة. علاوة على ذلك، قد لا تعكس الاعتماد على توزيع الضوء الموحد واستبعاد التفاعلات الكهروستاتيكية التفصيلية الظروف العملية بدقة، خاصة بالنسبة للأنواع المشحونة مثل TC. بشكل عام، بينما يوضح النموذج التفاعلات التآزرية بين مكونات النانو المركب بشكل فعال، فإنه يمثل تمثيلًا مثاليًا قد لا يلتقط تمامًا تعقيدات أداء النظام الفعلي.

Journal: Scientific Reports, Volume: 16, Issue: 1
DOI: https://doi.org/10.1038/s41598-026-47068-7
PMID: https://pubmed.ncbi.nlm.nih.gov/41991575
Publication Date: 2026-04-16
Author(s): Ayman K. El‐Sawaf et al.
Primary Topic: Membrane Separation Technologies

Overview

This study presents the development of a multifunctional ZGTPM nanocomposite membrane, integrating ZIF-8, graphene oxide (GO), Ti₃C₂ MXene, and TiO₂ quantum dots, aimed at the efficient removal of tetracycline (TC) from contaminated water. Characterization confirmed the successful formation of TiO₂ quantum dots (3-5 nm), which significantly enhanced the membrane’s properties. The incorporation of these hybrid nanofillers increased the specific surface area from 41.3 to 126.8 m²/g and improved hydrophilicity, reducing the water contact angle from 78.5° to 43.2°. Consequently, the pure water flux increased by approximately 80%, from 216 to 389 L·m⁻²·h⁻¹ at 1 bar, while achieving over 99.5% tetracycline removal efficiency with an adsorption capacity of 82.4 mg/g at 298 K, consistent with the Langmuir isotherm and pseudo-second-order kinetics.

The mechanistic analysis indicated that adsorption was the primary removal process in the dark, while photocatalytic degradation under simulated solar irradiation contributed significantly to the overall efficiency, achieving 68% degradation within 120 minutes. Thermodynamic evaluations suggested that the adsorption process is spontaneous, endothermic, and entropy-driven, indicating favorable interactions between tetracycline and the membrane. The ZGTPM membrane demonstrated excellent stability and reusability, maintaining over 97% removal efficiency after five cycles, with minimal structural degradation. This research highlights the membrane’s potential as a sustainable solution for antibiotic-contaminated wastewater treatment, with future enhancements possible through advanced optimization techniques.

Methods

The experimental methods employed in this study involved the synthesis of ZIF-8 and the preparation of ZGTPM nanocomposite membranes using various analytical-grade chemicals. Key materials included zinc nitrate hexahydrate and imidazole for ZIF-8 synthesis, along with graphitic powder and concentrated sulfuric acid for graphene oxide production via a modified Hummer’s method. The titanium carbide MXene nanosheets were obtained through etching Ti₃AlC₂ MAX phase powder, while titanium dioxide quantum dots were prepared using a sol-gel micro dispersion technique. Polyethersulfone served as the membrane matrix, with N-methyl-2-pyrrolidone and polyvinylpyrrolidone used as solvents and pore-forming agents, respectively.

Characterization of the ZGTPM membranes was conducted using a range of sophisticated techniques. X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and nitrogen adsorption/desorption analyses were employed to assess structural, morphological, and textural properties. Thermal stability was evaluated through thermogravimetric analysis (TGA), while surface chemical composition was analyzed via X-ray photoelectron spectroscopy (XPS). The mechanical properties were determined using a universal testing machine, and membrane porosity and surface roughness were measured using atomic force microscopy (AFM). The photocatalytic performance of the membranes was tested through the degradation of Tetracycline (TC) in a controlled reactor setup, involving a two-phase process to distinguish between adsorption and photocatalytic degradation, with efficiency quantified using UV-Vis spectrophotometry.

Results

The results section outlines the impact of various assumptions made during the study. Each assumption is described in detail, highlighting its relevance to the overall findings. The analysis indicates that the validity of these assumptions significantly influences the outcomes, suggesting that careful consideration must be given to their formulation.

Furthermore, the discussion emphasizes the implications of these results for future research and practical applications. It suggests that deviations from the stated assumptions could lead to different conclusions, underscoring the necessity for transparency in methodological choices. Overall, the findings reinforce the importance of rigorous assumption testing in enhancing the reliability of research outcomes.

Discussion

The discussion section of the research paper details the synthesis and characterization of a multifunctional composite membrane, referred to as ZGTPM, which incorporates ZIF-8, graphene oxide (GO), Ti₃C₂ MXene, and TiO₂ quantum dots (QDs). The preparation processes for each component are described, including the solvothermal method for ZIF-8, a modified Hummers process for GO, selective etching for Ti₃C₂ MXene, and a sol-gel method for TiO₂ QDs. The ZGT hybrid nanofiller is created by dispersing these components in deionized water, followed by ultrasonication and mechanical stirring to ensure homogeneity. The ZGTPM membrane is fabricated using polyethersulfone (PES) as the polymer matrix, with polyvinylpyrrolidone (PVP) as a pore former, resulting in a membrane that exhibits enhanced adsorption and photocatalytic properties.

The performance of the ZGTPM membrane for tetracycline (TC) removal is evaluated through controlled filtration and adsorption processes. Initial tests reveal that the membrane achieves a 31.5% removal efficiency through adsorption alone, while subsequent photocatalytic degradation under light exposure leads to a total removal efficiency exceeding 99.5%. This two-stage process highlights the synergistic effect of adsorption and photocatalysis, where the membrane acts as a concentrator for TC, enhancing the effectiveness of the photocatalytic sites. The study also emphasizes the membrane’s stability and reusability, demonstrating high removal efficiency across five consecutive cycles, with minimal performance loss. Structural characterization through techniques such as FTIR, XRD, SEM, and TGA confirms the successful integration of components and the membrane’s thermal stability, supporting its potential for practical applications in wastewater treatment.

Limitations

In the section on limitations, the authors discuss the assumptions made during the Finite Element Modeling (FEM) of the ZGTPM nanocomposite membrane, which was designed to evaluate the mass transport, adsorption, and photocatalytic degradation of tetracycline (TC). The model treats the membrane as a homogeneous and isotropic medium, despite its complex composition, and employs steady-state laminar flow governed by Darcy’s law. The transport of TC is modeled through a coupled diffusion-adsorption mechanism based on pseudo-second-order kinetics, while the degradation process is simplified to a pseudo-first-order reaction under uniform light irradiation and constant reactive oxygen species (ROS) generation at 298 K. Notably, the model neglects potential membrane fouling and pore-blocking effects, which may lead to an overestimation of the membrane’s long-term performance.

The authors acknowledge that these simplifications, while providing insights into the membrane’s efficiency, introduce significant limitations. The assumption of homogeneity may overlook localized transport resistance due to nanofiller agglomeration, and the exclusion of fouling effects could result in an inflated assessment of flux and removal capabilities. Furthermore, the reliance on uniform light distribution and the omission of detailed electrostatic interactions may not accurately reflect practical conditions, particularly for charged species like TC. Overall, while the model effectively illustrates the synergistic interactions among the nanocomposite components, it serves as an idealized representation that may not fully capture the complexities of the actual system performance.