DOI: https://doi.org/10.24874/ijqr20.02-06
تاريخ النشر: 2026-06-23
المؤلف: Do Duc Trung وآخرون
الموضوع الرئيسي: اتخاذ القرار متعدد المعايير
نظرة عامة
تبحث الورقة البحثية في تصنيف الموردين لشركة تصنيع البلاستيك الفيتنامية، مع التركيز على ثمانية موردين للرواسب تم تقييمهم وفقًا لأربعة معايير: سعر وحدة التوريد، ووقت التسليم، وتكلفة الشحن، وسعة التوريد. تستخدم الدراسة أربع طرق لحساب أوزان المعايير – الأوزان المتساوية، والانتروبيا، وMEREC، وSPC – وتستخدم أربع طرق لاتخاذ القرار متعددة المعايير (MCDM): RAM، وOPARA، وMUTRISS، وTOPSIS. تحدد النتائج باستمرار موردين، A1 وA5، كأفضل أداء عبر جميع الطرق، بينما يتم تصنيف A4 باستمرار كالأدنى. ومن الجدير بالذكر أن TOPSIS تفوقت على الطرق الأخرى من حيث فعالية التصنيف تحت سيناريوهات الوزن المتغيرة.
تؤكد الخاتمة على الدور الحاسم لاختيار الموردين في التأثير على جوانب تشغيلية مختلفة، بما في ذلك الاقتصاد ورضا العملاء. تبرز الدراسة فعالية الطرق الأربعة لـ MCDM في تصنيف الموردين، مع تصدر TOPSIS، تليها OPARA وMUTRISS، بينما كانت RAM الأقل فعالية. يقترح المؤلفون أن تتضمن الأبحاث المستقبلية عوامل إضافية مثل خصائص الرواسب، وجودة المنتج، وسمعة المورد، وآراء الخبراء لتعزيز شمولية تقييمات الموردين.
مقدمة
تؤكد المقدمة على أهمية تصنيف الموردين في تحسين العمليات التجارية من خلال تقييم الموردين بناءً على معايير مثل جودة المنتج، والسعر، وأداء التسليم، وخدمة العملاء. لا تعمل التعاون الفعال مع الموردين على تحسين الموارد وتقليل المخاطر فحسب، بل تعزز أيضًا المنافسة وتشجع على التحسين المستمر بين الموردين. بالإضافة إلى ذلك، يهدف عملية التصنيف إلى القضاء على الموردين غير الأخلاقيين والتوافق مع أهداف الاستدامة، لا سيما في سياق صناعة تصنيع البلاستيك، التي تواجه تحديات بيئية بسبب الطبيعة غير القابلة للتحلل للبلاستيك.
تركز الدراسة على عملية اتخاذ القرار الحاسمة في اختيار موردين الرواسب، مع تسليط الضوء على التعقيدات الناشئة عن المعايير المتعارضة مثل السعر، ووقت التسليم، واستقرار التوريد. لمعالجة هذه التحديات، تستخدم الدراسة أربع طرق لاتخاذ القرار متعددة المعايير (MCDM) – RAM، وOPARA، وMUTRISS، وTOPSIS – لتصنيف موردين الرواسب لشركة تصنيع البلاستيك الفيتنامية. تتضمن الدراسة أيضًا أربع طرق لتحديد الأوزان: الأوزان المتساوية، والانتروبيا، وMEREC، وSPC، مع تقديم مزيد من التبرير والتفاصيل المنهجية في الفصول اللاحقة. سيتم تقديم نتائج تصنيف الموردين في الفصل الرابع، مما يؤدي إلى استنتاج شامل في الفصل النهائي.
طرق
في هذا القسم، يوضح المؤلفون طرقًا مختلفة لحساب الأوزان للمعايير في تحليلهم. تعطي طريقة الأوزان المتساوية أهمية متساوية لكل معيار، معبرًا عنها رياضيًا كالتالي \( w_j = \frac{1}{n} \). تتضمن طريقة وزن الانتروبيا سلسلة من الحسابات باستخدام المعادلات (21) إلى (23)، حيث يتم اشتقاق \( n_{ij} \) من القيم المعيارية \( x_{ij} \) ويتم حساب الانتروبيا لتحديد الأوزان \( w_j \).
بالإضافة إلى ذلك، تستخدم طريقة وزن MEREC المعادلات (24) إلى (29) لاشتقاق الأوزان بناءً على القيم الدنيا والقصوى للمعايير، بينما تحسب طريقة وزن SPC، الموضحة في المعادلات (30) إلى (34)، الأوزان من خلال تقييم المسافة من نقطة مركزية محددة بواسطة القيم القصوى والدنيا للمعايير. توفر كل طريقة نهجًا منهجيًا لتعيين الأوزان، مما يضمن تقييم المعايير بناءً على أهميتها النسبية في سياق الدراسة.
نتائج
يقدم قسم النتائج تحليلًا شاملاً لثمانية موردين للرواسب البلاستيكية لشركة فيتنامية، مع التركيز على أربعة معايير: سعر الوحدة ($C_1$)، ووقت التسليم ($C_2$)، وتكلفة الشحن لكل شحنة ($C_3$)، وسعة التوريد ($C_4$). يظهر الموردون، المسمون A1 إلى A8، نقاط قوة متفاوتة عبر هذه المعايير، حيث يقدم A1 وA6 أقل سعر وحدة عند 13,000 VNĐ، وA5 أقل وقت تسليم عند يومين، وA8 أقل تكلفة شحن عند 6,000 VNĐ لكل شحنة، وA1 أعلى سعة توريد عند 10,000 طن. تهدف الدراسة إلى تحديد مورد يقلل التكاليف بينما يزيد من سعة التوريد، مما يتطلب استخدام طرق اتخاذ القرار متعددة المعايير (MCDM) – تحديدًا RAM، وOPARA، وMUTRISS، وTOPSIS – جنبًا إلى جنب مع تعيين الأوزان للمعايير.
تكشف التحليلات أن A1 وA5 يظهران باستمرار كأفضل الموردين عبر جميع طرق MCDM، بينما يتم تحديد A4 كخيار الأقل تفضيلًا. ومن الجدير بالذكر أن الأوزان المعينة للمعايير تختلف بشكل كبير اعتمادًا على الطريقة المستخدمة، حيث يتقلب وزن $C_1$ بنسبة تصل إلى 223.61%. تشير معاملات ارتباط الرتبة لسبيرمان إلى مستوى عالٍ من الاتفاق في تصنيفات الموردين عبر سيناريوهات الوزن المختلفة، مع قيم تتراوح من 0.8095 إلى 1. وهذا يشير إلى أن جميع طرق MCDM الأربعة فعالة لتصنيف الموردين، حيث تظهر TOPSIS أعلى مستوى من الاتساق، تليها OPARA وMUTRISS، بينما تحتل RAM المرتبة الثالثة. توفر هذه النتائج رؤى قيمة لعمليات اختيار الموردين المستقبلية في سياقات مماثلة.
مناقشة
تسلط المناقشة الضوء على ضرورة استخدام طرق متعددة لاتخاذ القرار متعددة المعايير (MCDM) لتصنيف الموردين عبر مختلف الصناعات، حيث يمكن أن تختلف التصنيفات بشكل كبير اعتمادًا على الطريقة المستخدمة. تشير الأدبيات إلى أنه بينما أظهرت بعض طرق MCDM، مثل TOPSIS، أداءً متسقًا عبر الدراسات، فإن طرقًا أخرى مثل RAM وOPARA وMUTRISS تعتبر جديدة نسبيًا ولم يتم تطبيقها على نطاق واسع في سياقات تصنيف الموردين. تؤكد الدراسة على أن استخدام مجموعة من هذه الطرق يمكن أن يعزز دقة اتخاذ القرار، لا سيما في سيناريوهات اختيار الموردين المعقدة.
في سياق تصنيف ثمانية موردين للرواسب البلاستيكية لشركة تصنيع فيتنامية، وجدت الدراسة أنه بغض النظر عن طرق التصنيف أو الوزن المستخدمة، فإن الموردين A1 وA5 ظهرا كخيارات مفضلة، بينما تم تصنيف A4 باستمرار في مرتبة أدنى. من بين الطرق المختبرة، أظهرت TOPSIS أعلى فعالية في التكيف مع التغيرات في أوزان المعايير، تليها OPARA وMUTRISS، بينما أظهرت RAM أقل فعالية. يقترح المؤلفون أن تتضمن الأبحاث المستقبلية عوامل إضافية، مثل خصائص الرواسب وسمعة المورد، لتوفير تقييم أكثر شمولية لخيارات الموردين.
DOI: https://doi.org/10.24874/ijqr20.02-06
Publication Date: 2026-06-23
Author(s): Do Duc Trung et al.
Primary Topic: Multi-Criteria Decision Making
Overview
The research paper investigates supplier ranking for a Vietnamese plastics manufacturing company, focusing on eight resin suppliers evaluated against four criteria: unit supply price, delivery time, shipping cost, and supply capacity. The study employs four methods for calculating criterion weights—Equal Weights, Entropy, MEREC, and SPC—and utilizes four Multiple Criteria Decision-Making (MCDM) methods: RAM, OPARA, MUTRISS, and TOPSIS. The results consistently identify two suppliers, A1 and A5, as top performers across all methods, while A4 is consistently ranked lowest. Notably, TOPSIS outperformed the other methods in terms of ranking effectiveness under varying weight scenarios.
The conclusion emphasizes the critical role of supplier selection in influencing various operational aspects, including economics and customer satisfaction. The study highlights the effectiveness of the four MCDM methods in ranking suppliers, with TOPSIS leading, followed by OPARA and MUTRISS, while RAM was the least effective. The authors suggest that future research should incorporate additional factors such as resin properties, product quality, supplier reputation, and expert opinions to enhance the comprehensiveness of supplier evaluations.
Introduction
The introduction emphasizes the significance of supplier ranking in enhancing business operations by evaluating suppliers based on criteria such as product quality, price, delivery performance, and customer service. Effective supplier collaboration not only optimizes resources and mitigates risks but also fosters competition and encourages continuous improvement among suppliers. Additionally, the ranking process aims to eliminate unethical suppliers and align with sustainability goals, particularly in the context of the plastics manufacturing industry, which faces environmental challenges due to the non-biodegradable nature of plastics.
The study focuses on the critical decision-making involved in selecting resin suppliers, highlighting the complexities arising from conflicting criteria such as price, delivery time, and supply stability. To address these challenges, the research employs four Multi-Criteria Decision-Making (MCDM) methods—RAM, OPARA, MUTRISS, and TOPSIS—to rank resin suppliers for a Vietnamese plastics manufacturing company. The study also incorporates four weighting methods: equal weights, entropy, MEREC, and SPC, with further justification and methodological details provided in subsequent chapters. The results of the supplier ranking will be presented in Chapter 4, culminating in a comprehensive conclusion in the final chapter.
Methods
In this section, the authors outline various methods for calculating weights for criteria in their analysis. The Equal Weights Method assigns equal importance to each criterion, expressed mathematically as \( w_j = \frac{1}{n} \). The Entropy Weighting Method involves a series of calculations using equations (21) to (23), where \( n_{ij} \) is derived from the normalized values \( x_{ij} \) and the entropy is computed to determine the weights \( w_j \).
Additionally, the MEREC Weighting Method employs equations (24) to (29) to derive weights based on minimum and maximum values of the criteria, while the SPC Weighting Method, detailed in equations (30) to (34), calculates weights by assessing the distance from a central point defined by the maximum and minimum values of the criteria. Each method provides a systematic approach to weight assignment, ensuring that the criteria are evaluated based on their relative importance in the context of the study.
Results
The results section presents a comprehensive analysis of eight plastic resin suppliers for a Vietnamese company, focusing on four criteria: unit price ($C_1$), delivery time ($C_2$), shipping cost per shipment ($C_3$), and supply capacity ($C_4$). The suppliers, labeled A1 through A8, exhibit varying strengths across these criteria, with A1 and A6 offering the lowest unit price at 13,000 VNĐ, A5 the shortest delivery time at 2 days, A8 the lowest shipping cost at 6,000 VNĐ per shipment, and A1 the highest supply capacity at 10,000 tons. The study aims to identify a supplier that minimizes costs while maximizing supply capacity, necessitating the use of multiple criteria decision-making (MCDM) methods—specifically RAM, OPARA, MUTRISS, and TOPSIS—along with the assignment of weights to the criteria.
The analysis reveals that A1 and A5 consistently emerge as the top suppliers across all MCDM methods, while A4 is identified as the least favorable option. Notably, the weights assigned to the criteria vary significantly depending on the method used, with $C_1$’s weight fluctuating by up to 223.61%. The Spearman rank correlation coefficients indicate a high level of agreement in supplier rankings across different weighting scenarios, with values ranging from 0.8095 to 1. This suggests that all four MCDM methods are effective for supplier ranking, with TOPSIS demonstrating the highest consistency, followed by OPARA and MUTRISS, while RAM ranks third. These findings provide valuable insights for future supplier selection processes in similar contexts.
Discussion
The discussion highlights the necessity of employing multiple Multi-Criteria Decision-Making (MCDM) methods for supplier ranking across various industries, as rankings can differ significantly depending on the method used. The literature indicates that while some MCDM methods, such as TOPSIS, have shown consistent performance across studies, others like RAM, OPARA, and MUTRISS are relatively new and have not been widely applied in supplier ranking contexts. The study emphasizes that utilizing a combination of these methods can enhance decision-making accuracy, particularly in complex supplier selection scenarios.
In the context of ranking eight plastic resin suppliers for a Vietnamese manufacturing company, the study found that regardless of the ranking or weighting methods employed, suppliers A1 and A5 emerged as preferred choices, while A4 was consistently ranked lower. Among the methods tested, TOPSIS demonstrated the highest effectiveness in adapting to changes in criterion weights, followed by OPARA and MUTRISS, with RAM showing the least effectiveness. The authors suggest that future research should incorporate additional factors, such as resin characteristics and supplier reputation, to provide a more comprehensive evaluation of supplier options.
