DOI: https://doi.org/10.46793/aeletters.2026.11.2.1
تاريخ النشر: 2026-06-29
المؤلف: Do Duc Trung وآخرون
الموضوع الرئيسي: اتخاذ القرار متعدد المعايير
نظرة عامة
تصنيف عمليات التصنيع أمر حاسم لتحسين النتائج التقنية والاقتصادية في عمليات الإنتاج، ومع ذلك فإنه يمثل تحديًا معقدًا في اتخاذ القرار متعدد المعايير (MCDM) بسبب المعايير المتنوعة المعنية. تبحث هذه الدراسة في تقنية تقييم النسبة القائمة على الانحراف (DEPART) لتصنيف عمليات الإنتاج في ثلاثة سيناريوهات: طحن المعادن باستخدام عجلات طحن مشقوقة، وتدوير المعادن، والاستخراج الكيميائي. تم تقييم نتائج طريقة DEPART مقارنة بست تقنيات MCDM أخرى، بما في ذلك الوزن الإضافي البسيط (SAW)، وتقنية تفضيل الطلب بناءً على التشابه مع الحل المثالي (TOPSIS)، والتحسين متعدد الأهداف على أساس تحليل النسبة (MOORA)، والتقييم النسبي المعقد (COPRAS)، وطريقة التقييم الجذرية (RAM)، وطريقة احتمالية. تشير النتائج إلى أنه بينما تعتبر DEPART فعالة في التصنيف، فإن الطريقة الاحتمالية هي الأنسب للسيناريوهات التي تم تحليلها.
في الختام، تؤكد الدراسة على أهمية تصنيف بدائل الإنتاج، والتي تؤثر بشكل كبير على العوامل التقنية والاقتصادية. على الرغم من أن DEPART تم التحقق من صحتها كنهج MCDM قابل للتطبيق، توصي الأبحاث بإعطاء الأولوية للطريقة الاحتمالية لمديري خطوط الإنتاج والمهندسين. ومن القيود الملحوظة الاعتماد على طرق الوزن الموضوعية للمعايير، والتي قد لا تعكس الأهمية النسبية للمعايير بشكل فعال. يجب أن تستكشف الأبحاث المستقبلية قابلية تطبيق تقنية DEPART مع طرق الوزن الذاتية أو الهجينة، خاصة في السياقات التي تتضمن بيانات غير مؤكدة أو تتغير بسرعة.
مقدمة
تتناول مقدمة هذه الورقة البحثية التعقيدات المرتبطة باختيار عمليات التصنيع المناسبة من مجموعة من البدائل، مثل تقنيات التصنيع الإضافي (مثل، نمذجة الترسيب المنصهر، والتصوير المجسم، والتلبيد بالليزر الانتقائي) وطرق التشغيل الميكانيكي. كل عملية تظهر خصائص مميزة من حيث توافق المواد، والدقة، والإنتاجية، والتكلفة، مما يستلزم تصنيفًا منهجيًا لتحسين كفاءة الإنتاج مع تلبية المتطلبات التقنية والاقتصادية. إن عملية اتخاذ القرار معقدة بسبب التبادلات بين العوامل المختلفة، مما يدفع إلى اعتماد طرق اتخاذ القرار متعدد المعايير (MCDM)، التي اكتسبت زخمًا في التصنيع بسبب قدرتها على التعامل مع معايير تقييم متعددة في وقت واحد.
تسلط الورقة الضوء على الزيادة الكبيرة في تطبيقات MCDM في قطاع التصنيع، كما يتضح من أكثر من 10,000 منشور من 2012 إلى 2022. ومع ذلك، فإن التنوع في تقنيات MCDM يقدم تحديات، حيث يمكن أن تؤثر الاختلافات في الهياكل الرياضية واستراتيجيات معالجة البيانات على أدائها عبر سيناريوهات التصنيع المختلفة. تبحث هذه الدراسة بشكل خاص في طريقة DEPART، وهي نهج MCDM جديد، لتقييم فعاليتها في تصنيف بدائل الإنتاج عبر قطاعات مختلفة. من خلال مقارنة طريقة DEPART مع تقنيات MCDM الأخرى المعروفة، تهدف الأبحاث إلى تقديم رؤى قيمة للمديرين في اتخاذ قرارات مستنيرة بشأن عمليات التصنيع. ستفصل الأقسام التالية من الورقة تطبيقات طرق MCDM، والحالات التصنيعية المختارة، والإجراءات التحليلية المستخدمة، والنتائج المقارنة للدراسة.
طرق
في هذه الدراسة، تم التحقق من فعالية طريقة DEPART في تصنيف بدائل التصنيع من خلال مقارنة نتائجها مع تلك الناتجة عن عدة طرق معروفة في اتخاذ القرار متعدد المعايير (MCDM)، بما في ذلك SAW، TOPSIS، MOORA، COPRAS، RAM، وطريقة قائمة على الاحتمالات. تم اختيار كل طريقة لخصائصها الفريدة: SAW لبساطتها ودورها الأساسي، TOPSIS لنهج المسافة الهندسية، MOORA لتحليل النسبة، COPRAS لحساب درجة المنفعة، RAM لوظيفتها التجميعية الجذرية، وطريقة الاحتمالية لطبيعتها غير الإضافية. استخدمت الدراسة مؤشرات متنوعة، لا سيما معامل ارتباط الترتيب لسبيرمان، لتقييم التشابه بين DEPART والطرق الأخرى، مما يسمح بتقييم شامل لفعالية التصنيف.
لتحديد أوزان المعايير الضرورية للتصنيف، استخدمت الأبحاث خمس طرق وزن موضوعية: متساوي، LOPCOW، الانتروبيا، وSPC. تم تطبيق هذه الطرق في وقت واحد عبر الأمثلة لضمان تقييم قوي لأداء DEPART ولتقييم استقرار التصنيفات البديلة المستمدة من تقنيات MCDM المختلفة. تؤكد الدراسة على أهمية كل من العوامل الموضوعية والذاتية في عملية الوزن، بهدف تقليل التحيزات التي قد تؤثر على نتائج اتخاذ القرار.
نتائج
تظهر نتائج الدراسة فعالية نهج DEPART في تصنيف البدائل عبر ثلاث حالات متميزة تتعلق بعمليات طحن المعادن، والتدوير، والاستخراج. في الحالة 1، تم تقييم تصنيفات بدائل طحن المعادن (A1 إلى A9) باستخدام طرق MCDM متنوعة، مما كشف أن البدائل A4 وA7 ظهرت باستمرار كخيارات رائدة، بغض النظر عن طريقة الوزن المطبقة. أشارت معاملات ارتباط سبيرمان بين DEPART وتقنيات MCDM الأخرى إلى قدرة عالية على التكيف وموثوقية خوارزمية DEPART، خاصة في تحديد البدائل المثلى وغير الفعالة.
في الحالة 2، أظهر تحليل بدائل تدوير المعادن مستوى عالٍ من الاتفاق بين DEPART وطرق MCDM الأخرى، حيث تم تصنيف البديل A9 باستمرار في المرتبة الأولى بسبب معدل إزالة المواد المتفوق. نجح نهج DEPART في تحقيق توازن بين المعايير الاقتصادية والتقنية، مؤكدًا قدرته على تحديد أفضل وأسوأ البدائل عبر سيناريوهات مختلفة. وبالمثل، في الحالة 3، تم تقييم خيارات الاستخراج لـ Cardiospermum Halicacabum L.، حيث أظهرت DEPART مرة أخرى درجة عالية من التوافق مع الطرق الأخرى، خاصة في تصنيف البديل A5 كأفضل خيار بناءً على محتواه العالي من المركبات النشطة.
بشكل عام، أثبت نهج DEPART فعاليته مثل طرق MCDM المعروفة عبر جميع الحالات، مع معاملات ارتباط سبيرمان العالية التي تؤكد موثوقيته في تصنيف البدائل. تشير النتائج إلى أن DEPART أداة قوية لاتخاذ القرار في السياقات متعددة المعايير، مما يستدعي مزيدًا من التحقيق من خلال تحليل الحساسية لتعزيز إطارها التقييمي.
مناقشة
تسلط قسم المناقشة في الورقة البحثية الضوء على تطبيق طرق اتخاذ القرار متعدد المعايير (MCDM) في التصنيع، مع التأكيد على قيود الاعتماد على طرق فردية لتصنيف البدائل. أظهرت دراسات متنوعة أن التصنيفات يمكن أن تختلف بشكل كبير بناءً على التقنية الحسابية المختارة، مما يدفع إلى توصيات لاستخدام طرق متعددة في وقت واحد لتعزيز الموثوقية. تدعم الأدلة التجريبية من قطاعات مختلفة، مثل تحسين الطاقة في المباني والتشغيل، الفكرة القائلة بأن طرق MCDM المختلفة تؤدي إلى تصنيفات غير متسقة، مما يبرز الحاجة إلى تقييمات شاملة للتقنيات الجديدة. تُعتبر طريقة DEPART، وهي إضافة حديثة إلى MCDM، نقطة محورية في هذا البحث، خاصة فيما يتعلق بقدرتها على التكيف في سياقات التصنيع.
تبحث الدراسة في فعالية طريقة DEPART في تصنيف بدائل الإنتاج عبر ثلاثة قطاعات تصنيع: طحن المعادن، والتدوير الميكانيكي، والاستخراج الكيميائي. تضمنت كل حالة أعدادًا متباينة من البدائل والمعايير، بهدف تحقيق استنتاجات موضوعية. تشير النتائج إلى أن طريقة DEPART مناسبة لتصنيف البدائل، حيث تحدد باستمرار خيارات عالية التصنيف مشابهة لتلك الموجودة باستخدام طرق MCDM الأخرى. تكشف تحليلات الحساسية أنه بينما تؤدي تقنية DEPART بشكل جيد، فإن الطريقة الاحتمالية تظهر كأفضل خيار عبر السيناريوهات، مما يدل على أنها أقل عرضة للتقلبات في أوزان المعايير. تشير النتائج إلى أنه بينما يمكن تطبيق طريقة DEPART، يجب إعطاء الأولوية للطريقة الاحتمالية لمديري خطوط الإنتاج والمهندسين، خاصة في السياقات التي تتضمن بيانات غير مؤكدة أو تتغير بسرعة. يجب أن تستكشف الأبحاث المستقبلية فعالية طريقة DEPART مع أساليب الوزن الذاتية أو الهجينة لتعزيز قابليتها للتطبيق في بيئات التصنيع الديناميكية.
DOI: https://doi.org/10.46793/aeletters.2026.11.2.1
Publication Date: 2026-06-29
Author(s): Do Duc Trung et al.
Primary Topic: Multi-Criteria Decision Making
Overview
The ranking of manufacturing processes is crucial for optimizing technical and economic outcomes in production operations, yet it presents a complex Multi-Criteria Decision-Making (MCDM) challenge due to the diverse parameters involved. This study investigates the Deviation-Based Pairwise Assessment Ratio Technique (DEPART) for ranking production processes in three scenarios: metal grinding with slotted grinding wheels, metal turning, and chemical extraction. The DEPART method’s results were benchmarked against six other MCDM techniques, including Simple Additive Weighting (SAW), Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), Multiobjective Optimization On the basis of Ratio Analysis (MOORA), COmplex PRoportional Assessment (COPRAS), Root Assessment Method (RAM), and a probability method. The findings suggest that while DEPART is effective for ranking, the probability method is the most suitable for the analyzed scenarios.
In conclusion, the study underscores the importance of ranking production alternatives, which significantly impacts technical and economic factors. Although DEPART is validated as a viable MCDM approach, the research recommends prioritizing the probability method for production line managers and engineers. A noted limitation is the reliance on objective weighting methods for criteria, which may not capture the relative importance of criteria effectively. Future research should explore the DEPART technique’s applicability with subjective or hybrid weighting methods, particularly in contexts involving uncertain or rapidly changing data.
Introduction
The introduction of this research paper addresses the complexities involved in selecting appropriate manufacturing processes from a range of alternatives, such as additive manufacturing techniques (e.g., Fused Deposition Modeling, Stereolithography, and Selective Laser Sintering) and mechanical machining methods. Each process exhibits distinct characteristics in terms of material compatibility, precision, productivity, and cost, necessitating a systematic ranking to optimize production efficiency while meeting technical and economic requirements. The decision-making process is complicated by trade-offs among various factors, prompting the adoption of Multi-Criteria Decision-Making (MCDM) methods, which have gained traction in manufacturing due to their ability to handle multiple evaluation criteria simultaneously.
The paper highlights the significant increase in MCDM applications in the manufacturing sector, as evidenced by over 10,000 publications from 2012 to 2022. However, the diversity in MCDM techniques presents challenges, as differences in mathematical structures and data-handling strategies can affect their performance across various manufacturing scenarios. This study specifically investigates the DEPART method, a novel MCDM approach, to evaluate its effectiveness in ranking production alternatives across different sectors. By comparing the DEPART method with other established MCDM techniques, the research aims to provide valuable insights for managers in making informed decisions regarding manufacturing operations. The subsequent sections of the paper will detail the applications of MCDM methods, the selected manufacturing cases, the analytical procedures employed, and the comparative results of the study.
Methods
In this study, the DEPART method’s effectiveness in ranking manufacturing alternatives was validated by comparing its results with those from several established Multi-Criteria Decision-Making (MCDM) methods, including SAW, TOPSIS, MOORA, COPRAS, RAM, and a probability-based approach. Each method was selected for its unique characteristics: SAW for its simplicity and foundational role, TOPSIS for its geometric distance approach, MOORA for its ratio analysis, COPRAS for its utility degree calculation, RAM for its radical aggregation function, and the probability method for its non-additive nature. The study employed various indices, notably the Spearman rank correlation coefficient, to assess the similarity between DEPART and the other methods, allowing for a comprehensive evaluation of ranking effectiveness.
To determine criterion weights essential for ranking, the research utilized five objective weighting methods: Equal, LOPCOW, Entropy, and SPC. These methods were applied simultaneously across examples to ensure a robust assessment of DEPART’s performance and to evaluate the stability of alternative rankings derived from different MCDM techniques. The study emphasizes the importance of both objective and subjective factors in the weighting process, aiming to mitigate biases that could influence decision-making outcomes.
Results
The results from the study demonstrate the effectiveness of the DEPART approach in ranking alternatives across three distinct cases involving metal grinding, turning, and extraction processes. In Case 1, the rankings of metal grinding alternatives (A1 to A9) were evaluated using various Multi-Criteria Decision-Making (MCDM) methods, revealing that alternatives A4 and A7 consistently emerged as top choices, regardless of the weighting method applied. The Spearman correlation coefficients between DEPART and other MCDM techniques indicated a strong adaptability and reliability of the DEPART algorithm, particularly in identifying both optimal and inefficient alternatives.
In Case 2, the analysis of metal turning alternatives showed a high level of agreement between DEPART and other MCDM methods, with alternative A9 consistently ranked first due to its superior material removal rate. The DEPART approach effectively balanced economic and technical criteria, confirming its capability to identify the best and worst alternatives across various scenarios. Similarly, in Case 3, the extraction options for Cardiospermum Halicacabum L. were evaluated, with DEPART again demonstrating a high degree of consensus with other methods, particularly in ranking alternative A5 as the best option based on its high content of active compounds.
Overall, the DEPART approach proved to be as effective as established MCDM methods across all cases, with consistently high Spearman correlation coefficients underscoring its reliability in ranking alternatives. The findings suggest that DEPART is a robust tool for decision-making in multi-criteria contexts, warranting further investigation through sensitivity analysis to enhance its evaluative framework.
Discussion
The discussion section of the research paper highlights the application of Multi-Criteria Decision-Making (MCDM) methods in manufacturing, emphasizing the limitations of relying on single methods for ranking alternatives. Various studies have demonstrated that rankings can vary significantly based on the chosen computational technique, prompting recommendations for the simultaneous use of multiple methods to enhance reliability. Empirical evidence from different sectors, such as building energy optimization and machining, supports the notion that different MCDM methods yield inconsistent rankings, underscoring the need for comprehensive evaluations of new techniques. The DEPART method, a recent addition to MCDM, is identified as a focal point of this research, particularly regarding its adaptability in manufacturing contexts.
The study investigates the DEPART method’s effectiveness in ranking production alternatives across three manufacturing sectors: metal grinding, mechanical turning, and chemical extraction. Each case involved varying numbers of alternatives and criteria, with the goal of achieving objective conclusions. The results indicate that the DEPART method is suitable for ranking alternatives, as it consistently identifies high-ranking options similar to those found using other MCDM methods. Sensitivity analyses reveal that while the DEPART technique performs well, the probability method emerges as the most robust choice across scenarios, demonstrating less susceptibility to fluctuations in criteria weights. The findings suggest that while the DEPART method is applicable, the probability method should be prioritized for production line managers and engineers, particularly in contexts involving uncertain or rapidly changing data. Future research should explore the DEPART method’s effectiveness with subjective or hybrid weighting approaches to further enhance its applicability in dynamic manufacturing environments.
