DOI: https://doi.org/10.15446/dyna.v93n240.121949
تاريخ النشر: 2026-02-11
المؤلف: Laith N. Ali وآخرون
الموضوع الرئيسي: إدارة أداء مشاريع البناء
نظرة عامة
تقدم هذه الدراسة نموذجًا تنبؤيًا مدفوعًا بالبيانات باستخدام تقنيات آلة الدعم المتجه (SVM) لتقدير إنتاجية الأكوام المحفورة في مشاريع البناء السكنية الشاهقة في العراق. من خلال تحليل البيانات الواقعية من مجمع العراق السكني، تحدد الدراسة العوامل الرئيسية التي تؤثر على الإنتاجية، بما في ذلك هندسة الكومة، نوع التربة، مواصفات المعدات، حجم الطاقم، وساعات العمل. حقق نموذج SVM دقة تنبؤ متوسطة مثيرة للإعجاب بلغت 99.89% ومعامل ارتباط (R) قدره 97.02%، متفوقًا بشكل كبير على طرق التقدير التقليدية.
تخلص الدراسة إلى أن النموذج القائم على SVM لا يتفوق فقط في الدقة والقدرة على التعميم مقارنةً بالانحدار الخطي المتعدد (MLR) والشبكات العصبية الاصطناعية (ANN) ولكنه أيضًا يلتقط العلاقات غير الخطية بشكل فعال من خلال استخدام نوى متعددة الحدود العادية. تسلط الآثار الأوسع لهذه البحث الضوء على إمكانيات أدوات التخطيط المدفوعة بالبيانات في صناعة البناء، لا سيما في المناطق النامية حيث غالبًا ما يتم تجاهل مثل هذه المنهجيات. من خلال تقديم نهج أكثر موضوعية ومدفوعًا بالبيانات لاتخاذ القرار خلال مراحل التخطيط المبكرة لأعمال الأساسات العميقة، يمكن أن يعزز هذا النموذج تخطيط الموارد ويقلل من عدم اليقين في الجدولة للمقاولين والمهندسين.
مقدمة
تتناول مقدمة هذه الورقة البحثية التحديات المتعلقة بتوقع إنتاجية البناء، والتي تعقدها التغيرات في نطاق المشروع، وقدرات القوى العاملة، والعوامل البيئية. يبرز المؤلفون قيود البيانات التاريخية والاستخدام المحدود لتحليلات البيانات المتقدمة في إدارة البناء. يقترحون استخدام الذكاء الاصطناعي، وبشكل خاص آلات الدعم المتجه (SVM)، كنهج واعد لنمذجة التفاعلات المعقدة بين متغيرات المشروع. أظهرت الدراسات السابقة فعالية SVM في سياقات بناء متنوعة، مثل إنتاجية أعمال الطوب والنماذج الهجينة التي تعزز دقة التنبؤ من خلال تقنيات التحسين.
على الرغم من هذه التقدمات، لا يزال هناك فجوة كبيرة في تطبيق نماذج SVM على أنشطة الأساسات العميقة، وخاصة بناء الأكوام المحفورة في مشاريع سكنية كبيرة في العراق. يشير المؤلفون إلى أن طرق التقدير التقليدية غالبًا ما تفشل في التقاط تفاصيل الإنتاجية المتأثرة بعوامل مثل نوع التربة ومعدات الحفر. لمعالجة هذه الفجوة، تهدف الدراسة إلى تطوير نموذج تنبؤي قائم على SVM لتقدير إنتاجية الأكوام المحفورة، باستخدام بيانات واقعية من مجمع العراق السكني. تشمل أهداف البحث إنشاء نموذج SVM قوي، وتحديد المعلمات المدخلة الرئيسية التي تؤثر على الإنتاجية، والتحقق من صحة النموذج مقابل طرق التقدير التقليدية. تسعى هذه العمل إلى توفير أداة دعم قرار قيمة لمخططي المشاريع في البيئات التي تفتقر إلى نمذجة التنبؤ ولكنها ضرورية.
الطرق
تستخدم منهجية هذه الدراسة نهج نمذجة مدفوع بالبيانات باستخدام بيانات واقعية من مجمع العراق السكني (IGRCP) في بغداد، الذي يضم 48 برجًا مع أساسات أكوام محفورة. تم استخراج المعلمات الرئيسية، بما في ذلك أبعاد الكومة، تصنيف التربة، معدات الحفر، حجم الطاقم، وساعات العمل، لتطوير نموذج تنبؤي. تتكون عملية النمذجة من ثلاث مراحل: جمع البيانات ومعالجتها، تدريب نموذج آلة الدعم المتجه (SVM) والتحقق من صحته، وتقييم النموذج. تم جمع أكثر من 500 سجل موثق، وتنظيفها، وتطبيعها للتعلم تحت الإشراف، مع ترميز المتغيرات الفئوية لتسهيل التحليل. تم تبرير استخدام نواة متعددة الحدود العادية في SVM بسبب قدرتها على نمذجة العلاقات غير الخطية بشكل فعال مع الحفاظ على القابلية للتفسير والصلابة عبر إعدادات المعلمات المختلفة.
في المرحلة الثانية، تم تقسيم مجموعة البيانات إلى مجموعات تدريب (75%) والتحقق (25%)، حيث أظهرت النواة متعددة الحدود العادية أداءً متفوقًا، بما في ذلك خطأ الجذر التربيعي المتوسط (RMSE) قدره 0.501 ومعامل ارتباط (R) قدره 94.66%. كانت اختيار هذه النواة بناءً على قدرتها على التقاط التفاعلات المعقدة النموذجية في بيئات البناء، فضلاً عن كفاءتها الحاسوبية مقارنةً بنوى دالة القاعدة الشعاعية (RBF). تم تبسيط النموذج النهائي للسماح بتقدير الإنتاجية مباشرةً من المعلمات الميدانية الرئيسية، مما يعزز تطبيقه العملي في الموقع. يتماشى هذا الإطار المنهجي مع التطبيقات السابقة لـ SVM في نمذجة إنتاجية البناء، موسعًا نطاق البحث ليشمل أعمال الأساسات العميقة، وهي منطقة كانت نسبياً غير مستكشفة في دراسات البناء العراقية.
النتائج
تشير نتائج الدراسة إلى أن النموذج المقترح القائم على آلة الدعم المتجه (SVM) يظهر أداءً تنبؤيًا قويًا في تقييم إنتاجية الأكوام المحفورة. باستخدام التحقق المتقاطع 10 مرات، حقق النموذج متوسط خطأ الجذر التربيعي (RMSE) قدره 0.501 ومتوسط معامل ارتباط (R) قدره 94.66%، مع انحراف معياري قدره ±2.1%. تشير هذه النتائج إلى أن أداء النموذج متسق عبر تقسيمات البيانات المختلفة، مما يؤكد قدرته على التعميم. بالإضافة إلى ذلك، أدى التقييم على مجموعة اختبار منفصلة غير مرئية (15% من مجموعة البيانات) إلى RMSE قدره 0.537 وقيمة R قدرها 92.81%، مما يدل على قدرات تنبؤية قوية دون علامات على الإفراط في التكيف.
علاوة على ذلك، تم تقييم نموذج SVM مقارنةً بنموذجين أساسيين قياسيين: الانحدار الخطي المتعدد (MLR) وشبكة عصبية اصطناعية (ANN) مع طبقة مخفية واحدة. تظهر النتائج، الملخصة في الجدول 1، أن نموذج SVM يتفوق بشكل كبير على كل من MLR وANN في التقاط العلاقات غير الخطية المعقدة التي تؤثر على إنتاجية الأكوام المحفورة. يعزز هذا من مساهمة الدراسة ويؤكد استخدام نواة متعددة الحدود العادية. بشكل عام، يعزز دمج التحقق المتقاطع، والاختبار المستقل، والتحليل المقارن موثوقية النموذج وقابليته للتطبيق العملي في سيناريوهات التخطيط للبناء في العالم الحقيقي.
المناقشة
تسلط قسم المناقشة في الورقة البحثية الضوء على فعالية نموذج قائم على آلة الدعم المتجه (SVM) في توقع الإنتاجية في بناء الأكوام المحفورة، حيث يظهر معامل ارتباط مرتفع (R = 0.9466) وخطأ جذر متوسط منخفض (RMSE = 0.501). تشمل المعلمات المدخلة الرئيسية التي تم تحديدها على أنها مؤثرة قطر الكومة، عمق الكومة، ونوع معدات الحفر، مما يتماشى مع المبادئ الهندسية التي تقترح أن الأكوام الأكبر والأعمق تتطلب المزيد من الوقت والمعدات المتخصصة. تم تقييم أداء النموذج مقارنةً بالطرق التقليدية، وبشكل خاص الانحدار الخطي المتعدد (MLR) والشبكات العصبية الاصطناعية (ANN)، حيث تفوق نموذج SVM بشكل كبير على كلاهما، مما يشير إلى تفوقه العملي في توقع الإنتاجية.
على الرغم من القيود مثل غياب بيانات متسلسلة زمنياً والاختبارات الإحصائية الرسمية، تم دعم قوة النموذج وقدرته على التعميم من خلال الأداء المتسق عبر مخططات التحقق. تعزز مجموعة البيانات، المشتقة من العمليات الفعلية في مجمع العراق السكني، قابلية تطبيق النموذج في العالم الحقيقي، مما يشير إلى إمكانية دمجه في سير عمل تخطيط المشاريع لتخصيص الموارد بكفاءة. كما تؤكد المناقشة على قابلية تفسير النموذج، التي تسهلها معادلة مبسطة مستمدة من SVM، والتي تعمل كأداة دعم قرار عملية للمهندسين. بشكل عام، تسلط النتائج الضوء على إمكانيات النهج المدفوع بالبيانات في تحسين إنتاجية البناء، لا سيما في المناطق النامية حيث تكون مثل هذه المنهجيات أقل شيوعًا.
القيود
تقدم الدراسة نتائج مهمة ولكنها مقيدة بعدة قيود. أولاً، مجموعة البيانات مشتقة من مشروع واحد كبير، وهو مجمع العراق السكني، مما قد يقيد إمكانية تعميم النتائج على سياقات أخرى. بالإضافة إلى ذلك، لا يأخذ النموذج في الاعتبار العوامل الخارجية مثل ظروف الطقس، وتغير إنتاجية العمالة، ولوجستيات الموقع بسبب قيود البيانات. علاوة على ذلك، لا تزال قابلية توسيع النموذج لتشمل مناطق أو أنواع مختلفة من مشاريع البناء غير مؤكدة.
لتحسين التنفيذ العملي، يمكن للمقاولين ومديري المشاريع الاستفادة من النموذج من خلال إدخال المعلمات الأساسية الميدانية – مثل قطر الكومة، العمق، نوع معدات الحفر، وحجم الطاقم – في واجهة سهلة الاستخدام، مثل جدول بيانات أو تطبيق موبايل. يمكن أن يوفر هذا النموذج تقديرات إنتاجية قريبة من الفورية، مما يساعد في تخصيص المعدات، والجدولة اليومية، وتقييم المخاطر. يجب أن تركز الأبحاث المستقبلية على توسيع مجموعة البيانات لتشمل مناطق جغرافية متنوعة وأنواع البناء، ودمج بيانات السلاسل الزمنية للتحقق من الصحة وتتبع التقدم، ودمج العوامل الخارجية، وتطوير واجهة برمجية أكثر سهولة للتطبيق الفوري في مواقع البناء. سيساعد معالجة هذه القيود في تطور النموذج إلى أداة دعم قرار قوية لتعزيز إنتاجية البناء عبر مشاريع البنية التحتية المختلفة.
DOI: https://doi.org/10.15446/dyna.v93n240.121949
Publication Date: 2026-02-11
Author(s): Laith N. Ali et al.
Primary Topic: Construction Project Management and Performance
Overview
This research presents a data-driven predictive model utilizing Support Vector Machine (SVM) techniques to estimate the productivity of bored piles in high-rise residential construction projects in Iraq. By analyzing real-world data from the Iraq Gate Residential Complex, the study identifies key factors influencing productivity, including pile geometry, soil type, equipment specifications, crew size, and working hours. The SVM model achieved an impressive mean prediction accuracy of 99.89% and a correlation coefficient (R) of 97.02%, significantly outperforming traditional estimation methods.
The study concludes that the SVM-based model not only excels in accuracy and generalizability compared to Multiple Linear Regression (MLR) and Artificial Neural Networks (ANN) but also effectively captures nonlinear relationships through the use of normalized polynomial kernels. The broader implications of this research underscore the potential of data-driven planning tools in the construction industry, particularly in developing regions where such methodologies are often overlooked. By providing a more objective and data-informed approach to decision-making during the early planning stages of deep foundation works, this model can enhance resource planning and reduce scheduling uncertainties for contractors and engineers.
Introduction
The introduction of this research paper addresses the challenges of predicting construction productivity, which is complicated by variability in project scope, workforce capabilities, and environmental factors. The authors highlight the limitations of historical data and the underutilization of advanced data analytics in construction management. They propose the use of Artificial Intelligence, specifically Support Vector Machines (SVM), as a promising approach for modeling complex interactions among project variables. Previous studies have shown the effectiveness of SVMs in various construction contexts, such as brickwork productivity and hybrid models that enhance predictive accuracy through optimization techniques.
Despite these advancements, a significant gap exists in applying SVM-based models to deep foundation activities, particularly bored pile construction in large-scale residential projects in Iraq. The authors note that traditional estimation methods often fail to capture the nuances of productivity influenced by factors like soil type and drilling equipment. To address this gap, the study aims to develop an SVM-based predictive model for estimating bored pile productivity, utilizing real-world data from the Iraq Gate Residential Complex. The research objectives include creating a robust SVM model, identifying key input parameters affecting productivity, and validating the model against conventional estimation methods. This work seeks to provide a valuable decision-support tool for project planners in environments where predictive modeling is scarce yet essential.
Methods
The methodology of this research employs a data-driven modeling approach utilizing real-world data from the Iraq Gate Residential Complex (IGRCP) in Baghdad, which features 48 towers with bored pile foundations. Key parameters, including pile dimensions, soil classification, drilling equipment, crew size, and working hours, were extracted to develop a predictive model. The modeling process consists of three stages: data collection and preprocessing, Support Vector Machine (SVM) model training and validation, and model evaluation. Over 500 verified records were collected, cleaned, and normalized for supervised learning, with categorical variables encoded to facilitate analysis. The use of a normalized polynomial kernel in SVM was justified due to its ability to model nonlinear relationships effectively while maintaining interpretability and robustness across various parameter settings.
In the second stage, the dataset was divided into training (75%) and validation (25%) subsets, with the normalized polynomial kernel demonstrating superior performance metrics, including a Root Mean Square Error (RMSE) of 0.501 and a correlation coefficient (R) of 94.66%. The choice of this kernel was based on its capacity to capture complex interactions typical in construction environments, as well as its computational efficiency compared to Radial Basis Function (RBF) kernels. The final model was simplified to allow for direct productivity estimation from key field parameters, enhancing its practical application on-site. This methodological framework aligns with previous SVM applications in construction productivity modeling, extending the research scope to deep foundation works, an area that has been relatively underexplored in Iraqi construction studies.
Results
The results of the study indicate that the proposed Support Vector Machine (SVM)-based model exhibits strong predictive performance in assessing bored pile productivity. Utilizing 10-fold cross-validation, the model achieved an average Root Mean Square Error (RMSE) of 0.501 and a mean correlation coefficient (R) of 94.66%, with a standard deviation of ±2.1%. These findings suggest that the model’s performance is consistent across different data splits, thereby confirming its generalization capacity. Additionally, evaluation on a separate unseen test set (15% of the dataset) yielded an RMSE of 0.537 and an R value of 92.81%, indicating robust predictive capabilities without signs of overfitting.
Furthermore, the SVM model was benchmarked against two standard baseline models: Multiple Linear Regression (MLR) and an Artificial Neural Network (ANN) with a single hidden layer. The results, summarized in Table 1, demonstrate that the SVM model significantly outperforms both MLR and ANN in capturing the complex nonlinear relationships affecting bored pile productivity. This reinforces the study’s contribution and validates the use of a normalized polynomial kernel. Overall, the incorporation of cross-validation, independent testing, and comparative analysis enhances the model’s reliability and practical applicability in real-world construction planning scenarios.
Discussion
The discussion section of the research paper highlights the efficacy of a Support Vector Machine (SVM)-based model for predicting productivity in bored pile construction, demonstrating a high correlation coefficient (R = 0.9466) and low root mean square error (RMSE = 0.501). Key input parameters identified as influential include pile diameter, pile depth, and drilling equipment type, aligning with engineering principles that suggest larger and deeper piles necessitate more time and specialized equipment. The model’s performance was benchmarked against traditional methods, specifically Multiple Linear Regression (MLR) and Artificial Neural Networks (ANN), where the SVM model significantly outperformed both, indicating its practical superiority for productivity forecasting.
Despite limitations such as the absence of time-sequenced data and formal statistical testing, the model’s robustness and generalizability were supported by consistent performance across validation schemes. The dataset, derived from actual operations at the Iraq Gate Residential Complex, enhances the model’s real-world applicability, suggesting its integration into project planning workflows for efficient resource allocation. The discussion also emphasizes the interpretability of the model, facilitated by a simplified equation derived from the SVM, which serves as a practical decision-support tool for engineers. Overall, the findings underscore the potential of data-driven approaches in optimizing construction productivity, particularly in developing regions where such methodologies are less common.
Limitations
The study presents significant findings but is constrained by several limitations. Firstly, the dataset is derived from a single large-scale project, the Iraq Gate Residential Complex, which may restrict the generalizability of the results to other contexts. Additionally, the model does not account for external factors such as weather conditions, labor productivity variability, and site logistics due to data limitations. Furthermore, the scalability of the model to different regions or types of construction projects remains unverified.
To enhance practical implementation, contractors and project managers can leverage the model by entering fundamental field parameters—such as pile diameter, depth, drilling equipment type, and crew size—into a user-friendly interface, like a spreadsheet or mobile application. This model can yield near-instant productivity estimates, aiding in equipment allocation, daily scheduling, and risk assessment. Future research should focus on expanding the dataset to include diverse geographic regions and construction types, integrating time-series data for validation and progress tracking, incorporating external factors, and developing a more accessible software interface for real-time application on construction sites. Addressing these limitations will facilitate the evolution of the model into a robust decision-support tool for enhancing construction productivity across various infrastructure projects.
