DOI: https://doi.org/10.15324/kjcls.2026.58.1.50
تاريخ النشر: 2026-03-31
المؤلف: Shin Jong KIM وآخرون
الموضوع الرئيسي: ممارسات المختبرات السريرية ومراقبة الجودة
نظرة عامة
تدرس هذه الدراسة فعالية التحكم الداخلي في الجودة (IQC) في المختبرات السريرية من خلال استخدام مقاييس سيغما لتقييم 36 مادة تحليلية على مدى ستة أشهر عند مستويين من التركيز. تم حساب قيم سيغما (σ) باستخدام الصيغة $\sigma = \frac{TE_a – |bias|}{CV}$، حيث تم أخذ الخطأ الكلي المسموح به (TEa) والانحياز ومعامل التباين (CV) في الاعتبار. تم تحليل المواد التحليلية التي كانت قيم σ أقل من 4 باستخدام مؤشر هدف الجودة (QGI)، الذي تم تعريفه على أنه $QGI = \frac{bias}{1.5 \times CV}$، لتمييز بين عدم الدقة وعدم التحديد. طبقت الدراسة قواعد سيغما الخاصة بـ Westgard بشكل انتقائي بناءً على هذه القيم، مما أدى إلى استراتيجيات مراقبة مصممة خصيصًا.
أشارت النتائج إلى أن 23 مادة تحليلية منخفضة المستوى و28 مادة تحليلية عالية المستوى حققت قيم σ تبلغ 6 أو أكثر، مما يسمح بمراقبة مبسطة باستخدام قاعدة 1(3S). على العكس من ذلك، أظهرت البوتاسيوم والصوديوم عند المستويات المنخفضة، جنبًا إلى جنب مع نيتروجين اليوريا في الدم والصوديوم عند المستويات العالية، قيم σ أقل من 3، مما يتطلب بروتوكولات مراقبة أكثر صرامة. بعد تنفيذ هذه القواعد المعدلة، انخفض العدد الإجمالي لفعاليات IQC من 7,244 إلى 4,950، مما يعكس انخفاضًا بنسبة 31.7%. تظهر هذه النتائج أن نهج IQC القائم على مقاييس سيغما لا يعمل فقط على تبسيط إدارة جودة المختبر ولكن أيضًا يحافظ على موثوقية التحليل.
نقاش
في هذه الدراسة، تم تقييم ما مجموعه 36 معلمة تحليلية باستخدام مواد كيميائية محددة من Roche، بما في ذلك المؤشرات الحيوية الرئيسية مثل الألبومين، والإنزيمات الكبدية المختلفة (مثل ALP وALT وAST)، والإلكتروليتات (مثل الصوديوم والبوتاسيوم). تم استخدام مؤشر هدف الجودة (QGI) لتقييم أسباب انخفاض قيم سيغما (σ < 4) من خلال التمييز بين عدم الدقة وعدم التحديد. تم حساب QGI باستخدام الصيغة \( QGI = \text{Bias} + 1.5 \times \text{CV} \)، مما يكشف أن القيم المنخفضة لسيغما تأثرت بشكل أساسي إما بعدم الدقة أو عدم التحديد، مع تحديد معلمات محددة لكل سبب. أدى تطبيق قواعد سيغما الخاصة بـ Westgard بناءً على قيم سيغما إلى تقليل كبير في قياسات التحكم الداخلي في الجودة (IQC)، حيث انخفضت من 7,244 إلى 4,950، مما يمثل انخفاضًا بنسبة 31.7%. تم إدارة المعلمات عالية الأداء (سيغما > 6) بقواعد مبسطة، بينما تطلبت تلك التي كانت قيم سيغما بين 3 و5 مراقبة أكثر صرامة. أشار التحليل إلى أنه بالنسبة للمعلمات التي كانت قيم سيغما أقل من 4، تم تحديد الأسباب الرئيسية لتدهور الجودة على أنها عدم التحديد لبعض مواد التحكم في الجودة منخفضة المستوى ومزيج من عدم الدقة وعدم التحديد لغيرها. بشكل عام، أدى تنفيذ مقاييس سيغما إلى تحسين كفاءة IQC في المختبر وعمليات تقييم الأداء.
DOI: https://doi.org/10.15324/kjcls.2026.58.1.50
Publication Date: 2026-03-31
Author(s): Shin Jong KIM et al.
Primary Topic: Clinical Laboratory Practices and Quality Control
Overview
This study investigates the effectiveness of internal quality control (IQC) in clinical laboratories by employing sigma metrics to evaluate 36 analytes over six months at two concentration levels. Sigma values (σ) were computed using the formula $\sigma = \frac{TE_a – |bias|}{CV}$, where total allowable error (TEa), bias, and coefficient of variation (CV) were considered. Analytes with σ values below 4 were further analyzed using the quality goal index (QGI), defined as $QGI = \frac{bias}{1.5 \times CV}$, to differentiate between inaccuracy and imprecision. The study applied Westgard sigma rules selectively based on these sigma values, leading to tailored monitoring strategies.
The results indicated that 23 low-level and 28 high-level analytes achieved σ values of 6 or greater, allowing for simplified monitoring using the 1(3S) rule. Conversely, potassium and sodium at low levels, along with blood urea nitrogen and sodium at high levels, exhibited σ values below 3, necessitating more stringent monitoring protocols. Following the implementation of these adjusted rules, the total number of IQC events decreased from 7,244 to 4,950, reflecting a 31.7% reduction. These findings demonstrate that a sigma metrics-based IQC approach not only streamlines laboratory quality management but also maintains analytical reliability.
Discussion
In this study, a total of 36 analytical parameters were evaluated using Roche-specific reagents, including key biomarkers such as albumin, various liver enzymes (e.g., ALP, ALT, AST), and electrolytes (e.g., sodium, potassium). The Quality Goal Index (QGI) was employed to assess the causes of low sigma values (σ < 4) by distinguishing between imprecision and inaccuracy. The QGI was calculated using the formula \( QGI = \text{Bias} + 1.5 \times \text{CV} \), revealing that low sigma values were primarily influenced by either inaccuracy or imprecision, with specific parameters identified for each cause. The application of Westgard sigma rules based on sigma values led to a significant reduction in internal quality control (IQC) measurements, decreasing from 7,244 to 4,950, representing a 31.7% reduction. High-performance parameters (sigma > 6) were managed with simplified rules, while those with sigma values between 3 and 5 required more rigorous monitoring. The analysis indicated that for parameters with sigma values below 4, the primary causes of quality degradation were identified as imprecision for certain low-level quality control materials and a combination of inaccuracy and imprecision for others. Overall, the implementation of sigma metrics improved laboratory IQC efficiency and performance evaluation processes.
