DOI: https://doi.org/10.52280/pujm.2026.58(03)01
تاريخ النشر: 2026-08-17
المؤلف: Rana Shehzad Waheed Akhtar وآخرون
الموضوع الرئيسي: اتخاذ القرار متعدد المعايير
نظرة عامة
تقدم البحث إطار عمل جديد يستخدم أرقام ز fuzzy ثنائية القطب (BFZNs) لمعالجة تعقيدات الغموض والثنائية القطبية في اتخاذ القرار متعدد المعايير (MCDM) لتقنيات إعادة تدوير النفايات البلاستيكية. يجمع هذا الإطار بين طريقة الإنتروبيا لتوزيع الأوزان الموضوعية، وتحليل نسبة تقييم الوزن التدريجي (SWARA) لإدخال الخبراء، والتقييم القائم على المنفعة النسبية والتوحيد غير الخطي (ERUNS) لترتيب البدائل. يعزز خوارزمية “الإنتروبيا-SWARA-ERUNS” موثوقية اتخاذ القرار من خلال إدارة عدم اليقين والغموض بشكل فعال، مما يسهل تقييمًا متوازنًا لطرق إعادة التدوير.
تشير النتائج إلى أن إعادة التدوير الميكانيكي هي التقنية الأكثر قابلية للتطبيق، تليها إعادة التدوير الكيميائي والتفكك الحراري، بما يتماشى مع الأولويات الاقتصادية والبيئية. يتم التحقق من قوة الإطار من خلال تحليلات الحساسية والمقارنة، مما يوضح أهميته العملية للمعنيين. بينما يتم الاعتراف بالقيود مثل افتراض استقلال المعايير والاعتماد على حكم الخبراء، يؤكد البحث على قابلية تكيف الإطار وشفافيته كأداة لدعم القرار. تشمل اتجاهات البحث المستقبلية دمج العوامل الديناميكية، ونمذجة العلاقات بين المعايير، واستخدام تقنيات التعلم الآلي لتعزيز فعالية النموذج في إدارة النفايات البلاستيكية المستدامة.
مقدمة
تتناول مقدمة هذه الورقة البحثية القضية الحرجة لإدارة النفايات البلاستيكية، مع تسليط الضوء على تأثيرها البيئي الكبير والحاجة الملحة لممارسات مستدامة. يؤكد المؤلفون على التعقيد المتضمن في اختيار تقنيات إعادة تدوير البلاستيك المثلى، مشيرين إلى أن طرق اتخاذ القرار التقليدية غالبًا ما تفشل في دمج البيانات الموضوعية مع حكم الخبراء وتتجاهل العلاقات غير الخطية بين المعايير المختلفة. الطبيعة المتفشية لتلوث البلاستيك تشكل تهديدات للحياة البرية والأنظمة البيئية وصحة الإنسان، مما يفاقمها ارتفاع الإنتاج العالمي من البلاستيك وعدم كفاية مرافق إدارة النفايات.
لتخفيف الآثار السلبية لتلوث البلاستيك، يدعو المؤلفون إلى تطوير تقنيات إعادة تدوير فعالة لا تقلل من النفايات فحسب، بل تحافظ أيضًا على الموارد الطبيعية وتعزز الاقتصاد الدائري. يحددون التحديات في عمليات اتخاذ القرار، التي يجب أن تأخذ في الاعتبار المعايير المتضاربة مثل التكاليف الاقتصادية، والفوائد البيئية، والقبول الاجتماعي. تؤكد الورقة على ضرورة وجود أدوات دعم قرار متقدمة يمكنها دمج البيانات الكمية والنوعية بشكل منهجي لتحديد حلول إعادة التدوير المثلى. تهدف الدراسة المقترحة إلى إنشاء إطار عمل شامل لاتخاذ القرار متعدد المعايير (MCDM) يستخدم منهجيات متنوعة، بما في ذلك طريقة الإنتروبيا لتوزيع الأوزان الموضوعية وSWARA لتوزيع الأوزان الذاتية للخبراء، لتعزيز موثوقية القرار وتقديم رؤى قيمة للمعنيين في سعيهم نحو ممارسات إعادة تدوير مستدامة.
نقاش
تسلط قسم النقاش في الورقة الضوء على تطور وتطبيق تقنيات اتخاذ القرار متعدد المعايير (MCDM)، خاصة في سياق عدم اليقين والتعقيد في بيئات اتخاذ القرار. يؤكد على أهمية دمج منهجيات متنوعة، مثل نظرية المجموعات الضبابية والمنطق الضبابي ثنائي القطب، لتعزيز دقة القرار. يسمح إدخال المجموعات الضبابية ثنائية القطب بتمثيل دقيق للتفضيلات، مما يستوعب المعايير الإيجابية والسلبية، وهو مفيد بشكل خاص في مجالات مثل التشخيص الطبي وإدارة البيئة. تشمل المساهمات الملحوظة تكيف طرق MCDM المعروفة مثل TOPSIS وVIKOR لتضمين السياقات الضبابية ثنائية القطب، مما يحسن من التعامل مع المعلومات المتضاربة.
تحدد الورقة أيضًا الفجوات الحرجة في أبحاث MCDM الحالية، مثل نقص التكامل بين حكم الخبراء والبيانات الإحصائية، والتبسيط المفرط للعلاقات المعقدة بين المعايير. تقترح إطار عمل جديد لـ MCDM يجمع بين طرق توزيع الأوزان الموضوعية والذاتية، باستخدام تقنيات الإنتروبيا وSWARA جنبًا إلى جنب مع أرقام ز ثنائية القطب لمعالجة عدم اليقين في تقييمات الخبراء. يهدف هذا النهج المتكامل إلى توفير أداة اتخاذ قرار أكثر موثوقية وشمولية، خاصة لتقييم تقنيات إعادة تدوير النفايات البلاستيكية، بما يتماشى مع أهداف الاستدامة. تؤكد نتائج الدراسة على أهمية تطوير أنظمة دعم قرار قوية يمكنها التنقل بفعالية في تعقيدات سيناريوهات اتخاذ القرار في العالم الحقيقي.
DOI: https://doi.org/10.52280/pujm.2026.58(03)01
Publication Date: 2026-08-17
Author(s): Rana Shehzad Waheed Akhtar et al.
Primary Topic: Multi-Criteria Decision Making
Overview
The research introduces a novel framework utilizing bipolar fuzzy Z-numbers (BFZNs) to address the complexities of vagueness and bipolarity in multi-criteria decision-making (MCDM) for plastic waste recycling technologies. This framework combines the Entropy method for objective weighting, the Stepwise Weight Assessment Ratio Analysis (SWARA) for expert input, and the Evaluation based on Relative Utility and Nonlinear Standardization (ERUNS) for ranking alternatives. The proposed “Entropy-SWARA-ERUNS” algorithm enhances the reliability of decision-making by effectively managing uncertainty and vagueness, thereby facilitating a balanced evaluation of recycling methods.
The findings indicate that mechanical recycling is the most viable technology, followed by chemical recycling and pyrolysis, aligning with economic and environmental priorities. The framework’s robustness is validated through sensitivity and comparative analyses, demonstrating its practical significance for stakeholders. While acknowledging limitations such as the assumption of criteria independence and dependence on expert judgment, the study emphasizes the framework’s adaptability and transparency as a decision support tool. Future research directions include integrating dynamic factors, modeling inter-criteria relationships, and employing machine learning techniques to further enhance the model’s effectiveness in sustainable plastic waste management.
Introduction
The introduction of this research paper addresses the critical issue of plastic waste management, highlighting its significant environmental impact and the urgent need for sustainable practices. The authors emphasize the complexity involved in selecting optimal plastic recycling technologies, noting that traditional decision-making methods often fail to integrate objective data with expert judgment and overlook nonlinear relationships among various criteria. The pervasive nature of plastic pollution poses threats to wildlife, ecosystems, and human health, exacerbated by rising global plastic production and inadequate waste management facilities.
To mitigate the adverse effects of plastic pollution, the authors advocate for the development of effective recycling technologies that not only reduce waste but also conserve natural resources and promote a circular economy. They identify the challenges in decision-making processes, which must consider conflicting criteria such as economic costs, environmental benefits, and social acceptance. The paper underscores the necessity for advanced decision support tools that can systematically integrate quantitative and qualitative data to identify optimal recycling solutions. The proposed study aims to create a comprehensive multi-criteria decision-making (MCDM) framework that employs various methodologies, including the Entropy method for objective weighting and SWARA for subjective expert weighting, to enhance decision reliability and provide valuable insights for stakeholders in pursuit of sustainable recycling practices.
Discussion
The discussion section of the paper highlights the evolution and application of Multi-Criteria Decision-Making (MCDM) techniques, particularly in the context of uncertainty and complexity in decision-making environments. It emphasizes the significance of integrating various methodologies, such as fuzzy set theory and bipolar fuzzy logic, to enhance decision accuracy. The introduction of bipolar fuzzy sets allows for a nuanced representation of preferences, accommodating both positive and negative criteria, which is particularly useful in fields like medical diagnosis and environmental management. Noteworthy contributions include the adaptation of established MCDM methods like TOPSIS and VIKOR to incorporate bipolar fuzzy contexts, thereby improving the handling of conflicting information.
The paper also identifies critical gaps in current MCDM research, such as the lack of integration between expert judgment and statistical data, and the oversimplification of complex relationships among criteria. It proposes a novel MCDM framework that combines objective and subjective weighting methods, specifically utilizing the Entropy and SWARA techniques alongside bipolar Z-numbers to address uncertainties in expert assessments. This integrated approach aims to provide a more reliable and comprehensive decision-making tool, particularly for evaluating plastic waste recycling technologies, aligning with sustainability goals. The study’s findings underscore the importance of developing robust decision support systems that can effectively navigate the intricacies of real-world decision-making scenarios.
