DOI: https://doi.org/10.1016/j.nme.2026.102072
تاريخ النشر: 2026-01-27
المؤلف: Alex Aimetta وآخرون
الموضوع الرئيسي: فيزياء وهندسة المفاعلات النووية
نظرة عامة
في هذه الدراسة، يتم استخدام خوارزمية جينية (GA) لتحسين شبكة الطاقة لشفرة nemoFoam متعددة الفيزياء، بهدف تكرار تدفق النيوترونات، وإيداع الطاقة النيوترونية، ونسبة إنتاج التريتيوم (TBR) التي تم الحصول عليها من شفرة مونت كارلو سيربنت لمفاعل الاندماج الميسور، والمتين، والمضغوط (ARC). تبدأ عملية التحسين بشبكة طاقة محددة مسبقًا تتكون من 86 مجموعة، وتستكشف GA التغيرات في كل من مواقع قطع الطاقة وعدد مجموعات الطاقة. تشير النتائج إلى أنه بينما يعد تحسين كميات متعددة في وقت واحد أمرًا معقدًا، يمكن أن تؤدي الشبكات الطاقية الأكثر خشونة إلى نتائج مرضية في nemoFoam، مما يقلل من المتطلبات الحاسوبية.
تظهر النتائج أن وظائف اللياقة المختلفة تؤدي إلى تكوينات مثالية لمجموعات الطاقة تختلف عبر الطيف الطاقي، مما يبرز أهمية تعريف وظائف اللياقة بعناية بناءً على التطبيقات المحددة. ومن الجدير بالذكر أن التكوينات المثلى تميل إلى استخدام عدد أقل من مجموعات الطاقة، وهو ما يفيد في تقليل التكاليف الحاسوبية. تظهر نتائج GA حساسية ضعيفة تجاه السكان الأولي، مما يشير إلى أنه تم تحقيق التقارب. يجب أن تبحث الأعمال المستقبلية في حساسية نتائج GA تجاه شبكة الطاقة الدقيقة الأولية وتفكر في دمج إيداع الطاقة الفوتونية في عملية التحسين. بالإضافة إلى ذلك، يمكن أن يؤدي تطبيق GA عبر درجات حرارة مختلفة إلى تعزيز فعالية شبكة الطاقة في المحاكاة متعددة الفيزياء.
مقدمة
تناقش مقدمة ورقة البحث التحديات المرتبطة باختيار شبكة طاقة مثالية لثوابت المجموعة المتقاربة في الشفرات النيوترونية الحتمية، لا سيما لمفاعلات الانشطار من الجيل التالي ومفاعلات الاندماج مثل مفاعل الاندماج الميسور، والمتين، والمضغوط (ARC). تعتمد عملية الاختيار غالبًا على حكم الخبراء بسبب العلاقة المعقدة بين مقاطع العرض وفيزياء المفاعل. قد تؤدي شبكة الطاقة الدقيقة للغاية إلى نتائج دقيقة ولكن على حساب وقت حسابي كبير، خاصة خلال مراحل التصميم وتقييم السلامة، حيث يمكن أن تختلف مواصفات مكونات المفاعل بشكل كبير.
لمعالجة هذه التحديات، يقترح المؤلفون استخدام الخوارزميات الجينية (GAs) لتحسين شبكة الطاقة النيوترونية في بطانة التكاثر السائلة لمفاعل الاندماج. يهدف هذا النهج إلى تعزيز مقاييس مثل نسبة إنتاج التريتيوم (TBR)، وتدفق النيوترونات، وإيداع الطاقة الحجمية، باستخدام شفرة nemoFoam للحسابات وتحليل مونت كارلو سيربنت كمرجع. تسلط الدراسة الضوء على أن هذه هي أول تطبيق لخوارزمية GA لتحسين شبكة الطاقة النيوترونية في هذا السياق، مع التركيز فقط على المقاييس المتعلقة بالنيوترونات بسبب القيود في توليد مجموعات الطاقة الفوتونية بواسطة شفرة سيربنت. تركز عملية التحسين على تحسين دقة النتائج بدلاً من الكفاءة الحاسوبية، مستفيدة من نموذج نقل نيوتروني مبسط لتسهيل الحلول الأسرع مقارنة بأساليب مونت كارلو التقليدية.
طرق
تشمل المنهجية الموضحة في هذه البحث تحسين هياكل شبكة الطاقة باستخدام خوارزمية جينية (GA) بالتزامن مع شفرة مونت كارلو سيربنت. تبدأ العملية بإنشاء ثوابت مجموعة دقيقة وكميات مرجعية على شبكة مرجعية، وهو أمر ضروري للتحسين. في هذه الدراسة، تكفي محاكاة واحدة من سيربنت للتطبيق النيوتروني، على عكس سيناريو متعدد الفيزياء الذي يتطلب عدة محاكاة عبر درجات حرارة مختلفة. تختار GA الشبكات المثلى من مجموعات فرعية من الشبكة المرجعية، وتسمح مرونة الشفرة بتطبيقها على مهام تحسين متنوعة تتجاوز مجرد هيكل شبكة الطاقة، مثل سمك المكونات في مفاعلات الاندماج.
تستخدم عملية التحسين حزمة pybind11 بايثون لتسهيل نقل هياكل المجموعات القليلة من GA بلغة C++ إلى حزمة COREutils، التي تتقلص فيها ثوابت المجموعة بناءً على طيف تدفق النيوترونات الذي تم تقييمه بواسطة سيربنت. المفاعل الذي تم تحليله هو مفاعل ARC، الذي يتم فيه حساب مقاطع العرض الدقيقة وكميات مرجعية، بما في ذلك نسبة إنتاج التريتيوم (TBR) وإيداع الطاقة النيوترونية، باستخدام مكتبة البيانات النووية ENDF/B-VIII.0. يتم استخدام نسخة أكثر خشونة من شبكة الطاقة VITAMIN-J، التي تتكون من 86 مجموعة طاقة، لضمان نتائج إحصائية موثوقة مع تقليل الشكوك. تشير النتائج إلى جودة عالية لمخرجات سيربنت، كما تتضمن الدراسة أيضًا نموذجًا ثنائي الأبعاد لمفاعل ARC في nemoFoam لتعزيز كفاءة المحاكاة.
نتائج
في هذا القسم، يتم تقديم نتائج تحسين خوارزمية جينية (GA) لحدود الطاقة في المحاكاة النيوترونية. يلتزم كل فرد تم إنشاؤه بواسطة GA بثلاث عتبات طاقة ثابتة: 1e-11 ميغا إلكترون فولت، 14 ميغا إلكترون فولت، و20 ميغا إلكترون فولت، حيث تعمل العتبتان الأخيرتان على تحديد حالة حدود تدفق النيوترونات ولتحديد نطاق الطاقة للمحاكاة. تم تكوين GA لإنتاج أفراد مع 2 إلى 7 حدود طاقة إضافية، مع الإشارة إلى أن التكوينات المثلى تتضمن عادةً أربع مجموعات، تتركز بشكل خاص في نطاق الطاقة السريعة بين 1 ميغا إلكترون فولت و20 ميغا إلكترون فولت. يشير هذا إلى أن تقسيمًا أدق في المجموعات عالية الطاقة مفيد لتحسين إيداع الطاقة النيوترونية في بطانة التكاثر للمفاعل.
أظهرت محاكيات إضافية تهدف إلى تحسين إيداع الطاقة النيوترونية عبر جميع مكونات المفاعل تحولًا في توزيعات حدود الطاقة، مفضلة النطاقات الطاقية المتوسطة والبطيئة. يشير هذا إلى وجود تبادل في استراتيجيات التحسين بين بطانة التكاثر ومكونات المفاعل الأخرى، حيث تكون البطانة في أبعد نقطة عن مصدر النيوترونات. أظهرت التحليلات اللاحقة أنه بينما أدى تحسين إيداع الطاقة، وتدفق النيوترونات، ونسبة إنتاج التريتيوم (TBR) في وقت واحد إلى نتائج أقل ملاءمة، فإن التركيز على إيداع الطاقة وحده أدى إلى أفضل النتائج لبطانة التكاثر وقناة التبريد. أظهرت النتائج باستمرار تقديرًا زائدًا بنسبة 10% لـ TBR عبر أفضل الأفراد، وهو ما يُعزى إلى الطبيعة البسيطة لمقطع إنتاج التريتيوم في المواد المستخدمة.
مناقشة
تدور المناقشة حول تطوير وتطبيق شفرة nemoFoam ضمن بيئة OpenFOAM لنمذجة التفاعلات النيوترونية والحرارية الهيدروليكية في أنظمة الاندماج. تتضمن الشفرة نموذج انتشار متعدد المجموعات للنيوترونات ونموذج انتشار أحادي الحركة للفوتونات، مما يسمح بإجراء محاكيات في مجالات ثنائية وثلاثية الأبعاد. تتمثل إحدى الميزات الرئيسية في وحدة معادلة الانتشار المرافقة، التي تساعد في تحسين نسبة إنتاج التريتيوم (TBR) من خلال رسم مساهمات النيوترونات إلى استجابات محددة للكواشف. تركز الدراسة بشكل أساسي على النيوترونات، مستفيدة من نهج الانتشار لتعزيز الكفاءة الحاسوبية، مع الاعتراف بالقيود في نمذجة الفوتونات بسبب القيود في شفرة سيربنت.
تستخدم البحث خوارزمية جينية (GA) لتحسين شبكات الطاقة لنموذج النيوترونات لمفاعل الاندماج ARC. من خلال السماح بالتغير في كل من مواقع قطع الطاقة وعدد مجموعات الطاقة، تستكشف GA مساحة حلول أوسع. تم تصميم وظائف اللياقة المستخدمة في GA لتحسين إيداع الطاقة النيوترونية، وتدفق النيوترونات، وTBR، مما يكشف أن التكوينات المثلى غالبًا ما تتكون من عدد أقل من مجموعات الطاقة، مما يقلل من التكاليف الحاسوبية. تشير النتائج إلى أن اختيار وظيفة اللياقة يؤثر بشكل كبير على نتائج التحسين، مما يشير إلى الحاجة إلى تعريف دقيق بناءً على التطبيقات المحددة. تقترح الأعمال المستقبلية تقييم حساسية نتائج GA تجاه شبكة الطاقة الأولية ودمج مساهمات الفوتونات في عملية التحسين، مما يعزز قابلية تطبيق النموذج في المحاكاة متعددة الفيزياء عبر درجات حرارة مختلفة.
DOI: https://doi.org/10.1016/j.nme.2026.102072
Publication Date: 2026-01-27
Author(s): Alex Aimetta et al.
Primary Topic: Nuclear reactor physics and engineering
Overview
In this study, a Genetic Algorithm (GA) is utilized to optimize the energy grid for the nemoFoam multiphysics code, aiming to replicate the neutron flux, neutron power deposition, and Tritium Breeding Ratio (TBR) results obtained from the Monte Carlo code Serpent for the Affordable, Robust and Compact (ARC) fusion reactor. The optimization process begins with a predefined energy grid consisting of 86 groups, and the GA explores variations in both the positions of energy cuts and the number of energy groups. The findings indicate that while optimizing multiple quantities simultaneously is complex, coarser energy grids can yield satisfactory results in nemoFoam, thereby reducing computational demands.
The results demonstrate that different fitness functions lead to optimal energy group configurations that vary across the energy spectrum, highlighting the importance of carefully defining fitness functions based on specific applications. Notably, the optimal configurations tend to utilize fewer energy groups, which is beneficial for minimizing computational costs. The GA’s outcomes show weak sensitivity to the initial population, suggesting convergence has been achieved. Future work should investigate the sensitivity of GA results to the initial fine energy grid and consider incorporating photon power deposition into the optimization process. Additionally, applying the GA across varying temperatures could enhance the energy grid’s effectiveness in multiphysics simulations.
Introduction
The introduction of the research paper discusses the challenges associated with selecting an optimal energy grid for collapsing group constants in deterministic neutronic codes, particularly for next-generation fission reactors and fusion reactors like the Affordable, Robust and Compact (ARC) reactor. The selection process often relies on expert judgment due to the complex relationship between cross sections and reactor physics. An overly fine energy grid may yield accurate results but at the cost of significant computational time, especially during the design and safety assessment phases, where reactor component specifications can vary greatly.
To address these challenges, the authors propose the use of genetic algorithms (GAs) for optimizing the neutron energy grid in a fusion reactor’s liquid breeding blanket. This approach aims to enhance metrics such as the Tritium Breeding Ratio (TBR), neutron flux, and volumetric power deposition, utilizing the nemoFoam code for calculations and Serpent Monte Carlo analysis as a reference. The study highlights that this is the first application of GA for neutron energy grid optimization in this context, focusing solely on neutron-related metrics due to limitations in photon energy group generation by the Serpent code. The optimization process emphasizes improving result accuracy rather than computational efficiency, leveraging a simplified neutron transport model to facilitate faster solutions compared to traditional Monte Carlo methods.
Methods
The methodology outlined in this research involves the optimization of energy grid structures using a genetic algorithm (GA) in conjunction with the Monte Carlo Serpent code. The process begins with generating fine-group constants and reference quantities on a reference grid, which is essential for the optimization. In this study, a single Serpent simulation suffices for the neutronic application, as opposed to a multiphysics scenario that would require multiple simulations across various temperatures. The GA selects optimal grids from subsets of the reference grid, and the versatility of the code allows it to be applied to various optimization tasks beyond just energy grid structure, such as component thickness in fusion reactors.
The optimization process utilizes the pybind11 Python package to facilitate the transfer of few-group structures from the C++ GA to the COREutils package, which collapses the group constants based on the neutron flux spectrum evaluated by Serpent. The reactor analyzed is the ARC reactor, for which fine-group cross sections and reference quantities, including the Tritium Breeding Ratio (TBR) and neutron power deposition, are computed using the ENDF/B-VIII.0 nuclear data library. A coarser version of the VITAMIN-J energy grid, consisting of 86 energy groups, is employed to ensure reliable statistical results while minimizing uncertainties. The results indicate a high quality of the Serpent outputs, and the study also incorporates a 2D model of the ARC reactor in nemoFoam to enhance simulation efficiency.
Results
In this section, the results of a genetic algorithm (GA) optimization for energy boundaries in neutron simulations are presented. Each individual generated by the GA adheres to three fixed energy thresholds: 1e-11 MeV, 14 MeV, and 20 MeV, with the latter two serving to define the neutron current boundary condition and to limit the simulation’s energy range. The GA is configured to produce individuals with an additional 2 to 7 energy boundaries, with findings indicating that optimal configurations typically include four groups, particularly concentrated in the fast energy range between 1 MeV and 20 MeV. This suggests that a finer discretization in high-energy groups is beneficial for optimizing neutron power deposition in the reactor’s breeding blanket.
Further simulations aimed at optimizing neutron power deposition across all components of the reactor revealed a shift in energy boundary distributions, favoring intermediate and slow energy ranges. This indicates a trade-off in optimization strategies between the breeding blanket and other reactor components, as the blanket is positioned farthest from the neutron source. Subsequent analyses showed that while optimizing for power deposition, neutron flux, and tritium breeding ratio (TBR) simultaneously led to less favorable results, focusing on power deposition alone yielded the best outcomes for the breeding blanket and cooling channel. The results consistently demonstrated a 10% overestimation of TBR across the best individuals, attributed to the simplistic nature of the tritium production cross-section in the materials used.
Discussion
The discussion centers on the development and application of the nemoFoam code within the OpenFOAM environment for modeling neutronic and thermal-hydraulic interactions in fusion systems. The code incorporates a multigroup diffusion model for neutrons and a mono-kinetic diffusion model for photons, allowing for simulations in both 2D and 3D domains. A key feature is the adjoint diffusion equation module, which aids in optimizing the Tritium Breeding Ratio (TBR) by mapping neutron contributions to specific detector responses. The study primarily focuses on neutrons, utilizing a diffusion approach to enhance computational efficiency, while acknowledging limitations in photon modeling due to constraints in the Serpent code.
The research employs a Genetic Algorithm (GA) to optimize energy grids for the ARC fusion reactor’s neutronic model. By allowing variability in both the positions of energy cuts and the number of energy groups, the GA explores a broader solution space. The fitness functions used in the GA are designed to optimize neutron power deposition, neutron flux, and TBR, revealing that optimal configurations often consist of fewer energy groups, thereby reducing computational costs. The findings indicate that the choice of fitness function significantly influences the optimization outcomes, suggesting a need for careful definition based on specific applications. Future work is proposed to assess the sensitivity of GA results to the initial energy grid and to incorporate photon contributions into the optimization process, enhancing the model’s applicability in multiphysics simulations across varying temperatures.
