دراسة متعمقة حول السلوك الاحتكاكي للبوليمرات ومركبات البوليمر: أحدث ما توصلت إليه الأبحاث An in-depth study on tribological behaviour of polymers and polymer composites: state-of-the-art

شارك:
المجلة: Frontiers in Materials، المجلد: 13
DOI: https://doi.org/10.3389/fmats.2026.1769252
تاريخ النشر: 2026-04-07
المؤلف: C. Pradeep Raja وآخرون
الموضوع الرئيسي: التريبولوجيا وتحليل التآكل

نظرة عامة

تسلط المراجعة الضوء على الأهمية المتزايدة للمركبات القائمة على البوليمر في التطبيقات التريبلوجية، مع التأكيد على خصائصها الخفيفة وقابلية تخصيصها. تقوم المراجعة بفحص منهجي لآليات الاحتكاك والتآكل في أنظمة البوليمر المختلفة، بما في ذلك المركبات المدعمة بالألياف والمركبات المدعمة بالجسيمات، والطلاءات السطحية، وتلك التي تم إنتاجها من خلال التصنيع الإضافي. يتم تحليل الآليات الرئيسية مثل نقل الحمل، وتشكيل أفلام النقل، والتشتت الحراري، والتأثيرات السطحية بشكل نقدي، مما يكشف كيف تؤثر نوعية التعزيز، وطرق المعالجة، وظروف التشغيل على الأداء. كما تحدد المراجعة القيود في ممارسات الاختبار الحالية وتدعو إلى توحيد المعايير لتعزيز الموثوقية في الدراسات المقارنة.

في الختام، تُعتبر المركبات البوليمرية مواد حيوية لمجموعة متنوعة من التطبيقات الهندسية، حيث تُظهر تحسينات ملحوظة في مقاومة التآكل واستقرار الاحتكاك من خلال تعزيز محكم وفهم الآليات الأساسية. تؤكد التحليل المقارن بين أنظمة البوليمر الحراري والحراري البلاستيكي، إلى جانب التقدم في تقنيات الطلاء والتصنيع الإضافي، على أهمية اختيار المواد وطرق المعالجة. ومع ذلك، فإن التحديات مثل المتانة على المدى الطويل، والحساسية البيئية، والتباين في بروتوكولات الاختبار تعيق التبني الصناعي الأوسع. تدعو المراجعة إلى تنفيذ ممارسات اختبار موحدة لتسهيل إعادة الإنتاج وتسريع تطوير المواد، بينما تعزز أيضًا استخدام المواد والعمليات المستدامة لتتوافق مع الأهداف البيئية. إن نهجًا متكاملًا يجمع بين الابتكار، والتحسين، والاستدامة أمر ضروري لتقدم أنظمة المركبات البوليمرية من الجيل التالي.

مقدمة

تناقش مقدمة هذه الورقة البحثية المجال المتطور للتريبلوجيا، وخاصة تطبيقها على المواد القائمة على البوليمر، التي تحل بشكل متزايد محل المعادن في مختلف الصناعات بسبب خصائصها الخفيفة، والفعالة من حيث التكلفة، والموفرة للطاقة. ركزت الدراسات الحديثة على التعزيزات المستدامة والبيولوجية للمركبات البوليمرية، مع فحص تأثيرات الحشوات والألياف الطبيعية على خصائصها الفيزيائية والميكانيكية والحرارية. تشمل الأمثلة البارزة المركبات المدعمة بألياف ستيركوليا فويتيدا وألياف رماد قصب السكر-نيم، والتي تكشف عن مقايضات الأداء وتحديات المعالجة التي تتطلب فهمًا أعمق للآليات التريبلوجية في هذه المواد.

تؤكد الورقة على السلوك التريبلوجي المعقد للبوليمرات، الذي يتأثر بطبيعتها اللزجة المرنة وهندستها الجزيئية، مما يميزها عن المعادن والسيراميك. تشمل العوامل الرئيسية التي تؤثر على الاحتكاك في البوليمرات الالتصاق والتشوه عند نقاط الاتصال المجهرية، حيث يوضح “نموذج النتوء” كيف يؤثر مجال الاتصال الحقيقي على الاحتكاك. كما تسلط المقدمة الضوء على دور الحشوات، مثل بولي تترافلوروإيثيلين (PTFE) وألياف الكربون، في تعزيز الأداء التريبلوجي لمركبات مصفوفة البوليمر (PMCs) من خلال تحسين القوة الميكانيكية ومقاومة التآكل. ومع ذلك، فإن فعالية هذه المركبات تعتمد على عوامل مختلفة، بما في ذلك خصائص الحشوات والترابط السطحي، والتي يمكن أن تؤثر بشكل كبير على أدائها تحت الظروف الديناميكية.

الطرق

شملت منهجية المراجعة المستخدمة في هذه الدراسة مسحًا منظمًا للأدبيات من مقالات محكمة مستمدة من قواعد بيانات بارزة مثل Scopus وWeb of Science وScienceDirect وSpringerLink وWiley Online Library وIEEE Xplore. استخدم البحث كلمات مفتاحية محددة تتعلق بالتريبلوجيا البوليمرية، بما في ذلك المركبات البوليمرية، وسلوك الاحتكاك والتآكل، وطلاءات المركبات، والمركبات البوليمرية المصنعة إضافيًا. تغطي الأدبيات التي تمت مراجعتها بشكل أساسي الفترة من 2005 إلى 2024، مع التركيز على الدراسات الحديثة من العقد الماضي، مع دمج الأعمال الأساسية السابقة. تم تضمين المقالات التي تكتب باللغة الإنجليزية فقط والتي تتناول الأداء التريبلوجي وآليات البوليمرات والمركبات البوليمرية، مع استبعاد المصادر غير المحكمة والدراسات غير ذات الصلة.

تم تحليل الدراسات المختارة بشكل منهجي بناءً على نوع المصفوفة، وفئة التعزيز، وطريقة المعالجة، بما في ذلك المركبات الضخمة، والطلاءات، والهياكل المطبوعة ثلاثية الأبعاد. تسلط المناقشة الضوء على الآليات التريبلوجية الرئيسية مثل تشكيل أفلام النقل، وتأثيرات الحمل، والتشتت الحراري، ومقاومة التآكل، والتفاعلات السطحية. لتعزيز الوضوح وتقليل التكرار، يتم دمج هذه الآليات عبر أنظمة المواد المختلفة بدلاً من تناولها بشكل منفصل في كل قسم. يتم وضع أدوار هذه الآليات في سياق نوع المصفوفة، وشكل التعزيز، وطريقة المعالجة، وظروف التشغيل. يتم تقديم خريطة مراجعة تخطيطية (الشكل 2) لتوضيح تنظيم المراجعة، وربط مصفوفات البوليمر، واستراتيجيات التعزيز، والآليات التريبلوجية السائدة، وطرق المعالجة مع الفجوات البحثية المحددة.

المناقشة

تسلط المناقشة حول طلاءات المركبات البوليمرية الضوء على دورها الكبير في تعزيز الأداء التريبلوجي عبر تطبيقات متنوعة. هذه الطلاءات، التي تتكون من مصفوفة بوليمرية مدمجة مع حشوات وظيفية، فعالة في تحسين مقاومة التآكل وتقليل الاحتكاك دون المساس بالخصائص الضخمة للمواد الأساسية. تُستخدم تقنيات مثل الطلاء بالرش والطلاء بالغمر بشكل شائع لتطبيقها. يؤثر اختيار مصفوفة البوليمر—مثل الإيبوكسي، أو البولي أميد، أو PTFE—على الاستقرار الحراري والميكانيكي للطلاءات، بينما يعزز إدخال حشوات مثل أنابيب الكربون النانوية (CNTs)، والغرافيت، والسيراميك من قدرة التحمل ويسهل تشكيل أفلام نقل منخفضة القص تقلل بشكل كبير من معدلات الاحتكاك والتآكل.

الآليات التي تحكم السلوك التريبلوجي لهذه الطلاءات معقدة، حيث تشمل تشكيل أفلام النقل، وتعزيز الحمل، والاستقرار الحراري. تلعب أفلام النقل، أو الأفلام التريبلوجية، دورًا حاسمًا في تقليل الاحتكاك من خلال إنشاء حاجز يقلل من الاتصال المباشر بين الأسطح المنزلقة. تتأثر كفاءة هذه الآلية بالطبيعة الكيميائية للبوليمر والحشوات، بالإضافة إلى خصائص مادة السطح المقابل. علاوة على ذلك، يتم تعزيز قدرة التحمل للطلاءات من خلال النقل الفعال للإجهاد من مصفوفة البوليمر الأكثر ليونة إلى الحشوات الأكثر صلابة، مما يحسن المقاومة للتآكل والتشقق. يساعد إدخال الحشوات الموصلة حراريًا في تشتت الحرارة، مما يعزز من متانة الطلاءات تحت ظروف التشغيل. بشكل عام، يعد الاختيار الدقيق للمواد واستراتيجيات التصميم أمرًا ضروريًا لتحسين الأداء التريبلوجي لطلاءات المركبات البوليمرية في البيئات الصعبة.

Journal: Frontiers in Materials, Volume: 13
DOI: https://doi.org/10.3389/fmats.2026.1769252
Publication Date: 2026-04-07
Author(s): C. Pradeep Raja et al.
Primary Topic: Tribology and Wear Analysis

Overview

The review highlights the growing significance of polymer-based composites in tribological applications, emphasizing their lightweight characteristics and customizable properties. It systematically examines friction and wear mechanisms in various polymer systems, including fibre-reinforced and particle-reinforced composites, surface coatings, and those produced through additive manufacturing. Key mechanisms such as load transfer, transfer film formation, thermal dissipation, and interfacial effects are critically analyzed, revealing how reinforcement type, processing methods, and operational conditions influence performance. The review also identifies limitations in current testing practices and advocates for standardization to enhance reliability in comparative studies.

In conclusion, polymer composites are positioned as vital materials for diverse engineering applications, demonstrating notable improvements in wear resistance and frictional stability through controlled reinforcement and an understanding of underlying mechanisms. The comparative analysis of thermoset and thermoplastic systems, alongside advancements in coating technologies and additive manufacturing, underscores the importance of material selection and processing routes. However, challenges such as long-term durability, environmental sensitivity, and variability in testing protocols hinder broader industrial adoption. The review calls for the implementation of standardized testing practices to facilitate reproducibility and accelerate material development, while also promoting the use of sustainable materials and processes to align with environmental goals. An integrated approach that combines innovation, optimization, and sustainability is essential for advancing next-generation polymer composite systems.

Introduction

The introduction of this research paper discusses the evolving field of tribology, particularly its application to polymer-based materials, which are increasingly replacing metals in various industries due to their lightweight, cost-effective, and energy-efficient properties. Recent studies have focused on sustainable and bio-based reinforcements for polymer composites, examining the effects of natural fillers and fibers on their physical, mechanical, and thermal characteristics. Notable examples include composites reinforced with Sterculia foetida fibers and sugarcane ash-neem fibers, which reveal performance trade-offs and processing challenges that necessitate a deeper understanding of tribological mechanisms in these materials.

The paper emphasizes the complex tribological behavior of polymers, which is influenced by their viscoelastic nature and molecular architecture, distinguishing them from metals and ceramics. Key factors affecting friction in polymers include adhesion and deformation at the microscopic contact points, with the “bump model” illustrating how real contact area impacts friction. The introduction also highlights the role of fillers, such as polytetrafluoroethylene (PTFE) and carbon fibers, in enhancing the tribological performance of polymer matrix composites (PMCs) by improving mechanical strength and wear resistance. However, the effectiveness of these composites is contingent on various factors, including filler characteristics and interfacial bonding, which can significantly influence their performance under dynamic conditions.

Methods

The review methodology employed in this study involved a structured literature survey of peer-reviewed articles sourced from prominent databases such as Scopus, Web of Science, ScienceDirect, SpringerLink, Wiley Online Library, and IEEE Xplore. The search utilized specific keywords related to polymer tribology, including polymer composites, friction and wear behavior, composite coatings, and additively manufactured polymer composites. The literature reviewed primarily spans from 2005 to 2024, with a focus on recent studies from the last decade, while also incorporating earlier foundational works. Only English-language articles that report on tribological performance and mechanisms of polymers and polymer composites were included, excluding non-peer-reviewed sources and unrelated studies.

The selected studies were systematically analyzed based on matrix type, reinforcement category, and processing method, encompassing bulk composites, coatings, and 3D-printed structures. The discussion highlights key tribological mechanisms such as transfer film formation, load-bearing effects, thermal dissipation, abrasion resistance, and interfacial interactions. To enhance clarity and reduce redundancy, these mechanisms are integrated across various material systems rather than being addressed separately in each section. The roles of these mechanisms are contextualized concerning matrix type, reinforcement morphology, processing route, and operating conditions. A schematic review map (Figure 2) is provided to illustrate the organization of the review, linking polymer matrices, reinforcement strategies, dominant tribological mechanisms, and processing routes with identified research gaps.

Discussion

The discussion on polymer composite coatings highlights their significant role in enhancing tribological performance across various applications. These coatings, which consist of a polymer matrix embedded with functional fillers, are effective in improving wear resistance and reducing friction without compromising the bulk properties of the underlying materials. Techniques such as spray coating and dip coating are commonly employed for their application. The choice of polymer matrix—such as epoxy, polyimide, or PTFE—affects the thermal and mechanical stability of the coatings, while the incorporation of fillers like carbon nanotubes (CNTs), graphene, and ceramics enhances load-bearing capacity and facilitates the formation of low-shear transfer films that significantly reduce friction and wear rates.

The mechanisms governing the tribological behavior of these coatings are complex, involving transfer film formation, load-bearing reinforcement, and thermal stability. Transfer films, or tribofilms, play a crucial role in reducing friction by creating a barrier that minimizes direct contact between sliding surfaces. The efficiency of this mechanism is influenced by the chemical nature of the polymer and fillers, as well as the characteristics of the counterface material. Additionally, the load-bearing capacity of the coatings is enhanced through the effective transfer of stress from the softer polymer matrix to the stiffer fillers, which improves resistance to wear and cracking. The incorporation of thermally conductive fillers further aids in heat dissipation, thereby enhancing the durability of the coatings under operational conditions. Overall, the careful selection of materials and design strategies is essential for optimizing the tribological performance of polymer composite coatings in demanding environments.